Microcontroladores

Produtos (20.000+)

MC9S08PA16VLC - 8-Bit S08 MCU 16KB Flash 32-LQFP | NXP
MC9S08PA16VLC

MC9S08PA16VLC - 8-Bit S08 MCU 16KB Flash 32-LQFP | NXP

The NXP MC9S08PA16VLC is an 8-bit S08 family microcontroller based on the HCS08L core, integrating 16KB of flash memory, 2KB of RAM and an integrated LCD driver, housed in a 32-pin LQFP (7x7 mm) surface-mount package. It operates at up to 20MHz bus clock, with a 2.7V to 5.5V supply range, making it well suited for battery-powered portable applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), data memory (RAM), and a rich set of peripherals such as timers, ADCs, communication interfaces and I/O ports. The S08 family is NXP's 8-bit HCS08 line, optimized for cost-sensitive, low-power embedded designs that require deterministic real-time response. Within the broader taxonomy, MC9S08PA16 belongs to the HCS08 -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor hierarchy. Key features include an on-chip 12-channel 12-bit ADC, an analog comparator, a motor-control FlexTimer, multiple low-power modes with wake-up sources, an internal clock source, and a hardware CRC engine. The integrated LCD driver supports up to 4x24 segments without external charge-pump components, reducing BOM cost for human-machine interface (HMI) applications. Architecturally, the PA16 uses a von Neumann bus with a 20MHz HCS08L core, dual-clock FLL with internal 31.25kHz reference, and an integrated voltage regulator for the core logic. Peripherals are mapped into a unified address space; the ROM-resident bootloader allows in-application flash programming via the SCI or SPI peripherals, easing field firmware updates. Typical applications include battery-powered HMI devices, low-end motor control, white-goods control panels, simple sensor hubs, and industrial control nodes. The wide 2.7V-5.5V supply enables direct operation from a single-cell Li-ion or two-AA battery stack. When designing with this MCU, route the VDDA/VSS pair with a 0.1uF ceramic bypass capacitor placed within a few millimeters of the pins, follow the recommended decoupling network from the reference manual, and respect the absolute maximum 5.8V supply limit to avoid latch-up. Pin assignments for the 32-LQFP package are detailed in the device datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the MC9S08PA16VLC that complement the NXP datasheet and reference manual.

Cotação Contato
MC9S08PA16VLD-FR - 8-bit S08 MCU 16KB Flash QFP-44 | NXP
MC9S08PA16VLD-FR

MC9S08PA16VLD-FR - 8-bit S08 MCU 16KB Flash QFP-44 | NXP

The NXP MC9S08PA16VLD-FR is an 8-bit S08 central processor unit (CPU) microcontroller with 16KB of Flash memory, designed for cost-sensitive embedded applications in industrial and consumer markets. According to the NXP datasheet, the device runs at up to 20 MHz bus speed across a 2.7V to 5.5V supply, integrating EEPROM, ADC, analog comparator, and a motor-control FlexTimer on-die. The -FR suffix indicates tape-and-reel packaging for high-volume assembly. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), RAM, and a rich set of peripherals including timers, ADCs, and communication interfaces. The S08PA family sits within NXP's broader HCS08 / S08 microcontroller hierarchy, which targets low-power, deterministic, and cost-optimized designs where 32-bit performance is not required. The S08PA family is the affordable, 5V-tolerant evolution of the legacy HC08 and S08 cores, with a focus on EFT/ESD robustness, integrated EEPROM for parameter storage, and analog-rich peripherals that compete directly with Microchip PIC16/18 and Atmel/Microchip AVR devices. Key specifications include 16KB program Flash, 1KB RAM, 128B EEPROM, an internal clock source, multiple timers including the FlexTimer for motor control, and a 10-channel 12-bit ADC. The device operates over -40C to +105C and is offered in a 44-pin LQFP (VLD) package designed for hand-solder-friendly prototyping as well as high-volume SMT production. A built-in analog comparator and a configurable interrupt controller reduce external component count for typical sensor and motor-control applications. Architecturally, the S08PA core is a von-Neumann-style 8-bit CPU with a 16-bit index register and a stack pointer, executing the same S08 instruction set used across the HCS08 family. Reuse of the existing S08 core, IP, and tools means code, compilers (CodeWarrior, GCC for S08), and in-circuit debuggers migrate freely between PA, PT, and PL family devices, simplifying product-platform development. Typical applications include BLDC and brushed-DC motor control in small appliances and fans, sensor interfaces in white goods and HVAC, lighting controls, low-end user-interface panels, and any cost-sensitive industrial sensor node that benefits from on-chip EEPROM parameter storage. The wide 2.7V-5.5V supply tolerates 3.3V logic or 5V rails directly from battery packs or rectified mains. When designing with this MCU, allocate the unused ADC channels to product-feature expansion, plan for an external 32.768 kHz crystal if precise time-of-day is required, and reserve one GPIO for an LED-status or fault indicator. Decouple VDD/VSS with a 100nF X7R capacitor placed within a few millimeters of the package pins. This page synthesizes distributor pricing for the MC9S08PA16VLD-FR, drop-in alternatives from the S08P family and cross-brand competition, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08PA16VTG - 8-bit 20MHz S08 MCU, 16KB Flash | NXP
MC9S08PA16VTG

MC9S08PA16VTG - 8-bit 20MHz S08 MCU, 16KB Flash | NXP

The NXP MC9S08PA16VTG is an 8-bit microcontroller based on the S08 core, operating at up to 20 MHz with 16 KB of on-chip Flash memory, 2 KB of RAM, and 256 bytes of EEPROM, housed in a 16-pin TSSOP package. It supports a wide 2.7 V to 5.5 V supply range and provides 14 general-purpose I/O pins, an internal clock source, and the standard S08 peripheral set including ADC, PWM, timers, and an analog comparator. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, integrated Flash program memory, RAM, and peripherals such as timers, ADCs, and communication interfaces. MCUs sit at the bottom of the embedded computing hierarchy - microcontroller -> embedded controller -> processor -> computing platform - and are commonly used to replace discrete logic in appliances, motor drives, and consumer electronics where deterministic, low-cost control is required. The S08 core is NXP's 8-bit architecture that evolved from the HC08, optimized for low power and motor-control peripherals. Key features of the MC9S08PA16VTG include 16 KB Flash with in-system programming, hardware EEPROM emulation, a 12-channel 10-bit ADC for analog sensing, two analog comparators, a FlexTimer for motor control PWM, and enhanced ESD/EFT performance designed for harsh industrial environments. The 16-pin TSSOP gives 14 usable I/O pins when using the internal oscillator, while the 5 V I/O tolerance simplifies interfacing to 5 V sensors and actuators without level shifters. The device integrates an internal clock with FLL stabilization, reducing BOM cost by eliminating an external crystal in many applications. Its peripheral set - PWM, timers, ADC, analog comparator, and on-chip communication - is mapped to specific pins documented in the device datasheet, and the part reuses existing S08 peripherals and development tools (CodeWarrior IDE, S08 Flash programmers, freescale/NXP P&E tools) for migration from earlier S08 designs. Typical applications include BLDC/PMSM fan and small-motor control, white-goods and appliance control boards, LED lighting controllers, sensor interfaces with on-chip ADC, and low-cost industrial control boards. The 5V-tolerance and EFT/ESD robustness make it especially suitable for white goods where the control board sits near high-voltage switching sections. A key design consideration is the choice of internal vs. external clock: the internal reference with FLL is sufficient for UART timing at modest baud rates, but designs that need accurate CAN, USB, or high-speed UART timing benefit from an external crystal. Power dissipation in TSSOP-16 at 20 MHz is well below 100 mW and rarely requires thermal analysis. This page synthesizes distributor pricing, drop-in alternatives within the S08 family, and practical design notes not found in the manufacturer datasheet at a glance.

Cotação Contato
MC9S08PA16VTJ - 8-bit S08 MCU 16KB Flash 20-TSSOP | NXP
MC9S08PA16VTJ

MC9S08PA16VTJ - 8-bit S08 MCU 16KB Flash 20-TSSOP | NXP

The NXP MC9S08PA16VTJ is an 8-bit S08 microcontroller from the S08PA family, integrating 16 KB of flash, an HCS08L central processor unit, and rich analog peripherals in a 20-pin TSSOP package. Operating up to 20 MHz bus across 2.7 V to 5.5 V and -40 °C to 105 °C, it is engineered for cost-sensitive 5 V embedded systems that still require strong EFT/ESD performance and on-chip analog. An S08 microcontroller is an 8-bit microcontroller built around Freescale/NXP's HCS08 CPU core. It belongs to the broader microcontroller (MCU) category inside embedded computing, and sits within the S08 family hierarchy S08PA -> S08P -> S08 -> HC08. The HCS08L variant of the S08 family targets low-power and high-noise-immunity applications using a 5 V native process, making it well suited to industrial and appliance environments. Key features of the MC9S08PA16VTJ include an internal clock generation block with FLL, up to 16 KB flash with EEPROM-style emulation, on-chip 12-bit ADC, an analog comparator, a FlexTimer supporting motor-control PWM, multiple low-power modes (Wait and Stop), and a multi-source interrupt controller with up to 40 sources and four-level nesting. The integrated bandgap reference and trimmable internal oscillator reduce external component count. The device uses the S08 instruction set, which is source- and object-compatible with the legacy HC08 family, easing legacy code reuse. A BDM (Background Debug Mode) interface and on-chip debug logic enable in-circuit programming and non-intrusive debugging, while the COP watchdog and hardware CRC add safety for white-goods and motor control designs. Typical applications include BLDC and PMSM motor control (small fans, pumps, e-bike accessories), major home appliances (washing machines, dishwashers, refrigerators), industrial sensor signal conditioning, low-end HVAC fan controllers, and 5 V general-purpose control boards. The part is well matched to designs requiring a 5 V native MCU with 12-bit ADC accuracy above that of typical 3.3 V ARM Cortex-M0 parts. Designers should pay attention to decoupling: place 100 nF plus bulk capacitors directly at VDD/VSS, keep ADC analog supply well isolated from switching MOSFET returns, and verify ESD/EFT compliance at the system level because the device's IEC-style ratings depend strongly on PCB layout. S08PA family variants in the same 20-pin TSSOP footprint allow flash size and peripheral scaling without PCB rework. This page synthesises verified distributor pricing, NXP datasheet parameters, and pin-compatible S08 family alternatives into one decision-ready sheet that goes beyond what Mouser, DigiKey, or Octopart show individually.

Cotação Contato
MC9S08PA32VLF - 8-bit S08 MCU 32KB Flash 48-LQFP | NXP
MC9S08PA32VLF

MC9S08PA32VLF - 8-bit S08 MCU 32KB Flash 48-LQFP | NXP

The NXP MC9S08PA32VLF is an 8-bit microcontroller based on the S08 core running at up to 20 MHz, with 32 KB of Flash memory, integrated EEPROM, and a 48-pin LQFP (7x7 mm) surface-mount package. It belongs to the 5 V S08PA family, which integrates key features such as EEPROM, an ADC, an analog comparator, and a motor-control FlexTimer to simplify design and reduce total system cost. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data RAM, and peripherals on one die. Within the embedded-systems hierarchy, the S08PA sits in the low-cost, general-purpose 8-bit MCU class below NXP's 32-bit Kinetis and S12 families, targeting cost-sensitive control tasks in appliances, motor drives, and automotive body electronics. Key features of the MC9S08PA32VLF include 32 KB (32K x 8) of on-chip Flash, an S08 central processor unit with efficient C-friendly instruction set, up to 20 MHz bus operation, and excellent EFT/ESD robustness highlighted by NXP for the S08P family. The integrated EEPROM eliminates the need for an external nonvolatile memory device, and the FlexTimer supports PWM generation for motor control. Architecturally, the S08 core is an enhanced, fully upward-compatible descendant of the HC08 architecture, reusing proven IP and development tools. This makes migration from existing 8-bit S08 designs straightforward: the S08P family is scalable and pin-compatible across flash densities, so a board designed around the 32 KB part can later adopt 16 KB or 60 KB variants without PCB rework. Typical applications include small motor control (fans, pumps, power tools), appliance control panels, battery chargers, lighting control, and automotive body or comfort modules where a 5 V supply domain is standard. A key design consideration is lifecycle: NXP lists the MC9S08PA32VLF as NRND (Not Recommended for New Designs), so new projects should evaluate the pin-compatible S08P siblings or plan an end-of-life migration path before committing. This page synthesizes distributor inventory data, family cross-references, and drop-in alternative analysis not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08PA32VQH - 8-bit S08 MCU 32KB Flash QFP-64 | NXP
MC9S08PA32VQH

MC9S08PA32VQH - 8-bit S08 MCU 32KB Flash QFP-64 | NXP

The NXP MC9S08PA32VQH is an 8-bit S08 CISC microcontroller with 32KB of Flash memory, housed in a 64-pin PQFP (QFP-64) package and operating from 3.3V/5V supply rails. It belongs to the S08PA family and is offered by NXP Semiconductors (formerly Freescale) with a lifecycle status reported as NRND (Not Recommended for New Designs). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The 8-bit S08 CISC core executes a complex instruction set targeting cost-sensitive, deterministic embedded applications. Within the broader taxonomy, this device sits as: microcontroller -> 8-bit MCU -> S08 family -> S08PA sub-family -> power-conscious 5V general-purpose tier. The S08PA family reuses the legacy S08 core, toolchain, and IP, allowing easy migration from earlier 8-bit S08 products while integrating modern analog and timer peripherals. Key features of the MC9S08PA32VQH include on-chip EEPROM, an analog-to-digital converter (ADC), an analog comparator, and a motor-control FlexTimer. The device is positioned as a simple yet powerful MCU with excellent EFT/ESD performance, making it suitable for harsh industrial and appliance environments. The integrated FlexTimer is specifically designed for motor-control PWM generation, while the analog comparator and ADC support mixed-signal feedback loops. The S08PA architecture pairs the well-known HCS08 instruction set with an efficient peripheral set, allowing developers to leverage existing S08 code, libraries, and development tools. The 64-pin PQFP package offers a generous pin count for applications that need multiple PWM channels, communication buses, and analog inputs. The device supports both 3.3V and 5V operation, simplifying integration into legacy 5V systems as well as modern 3.3V designs. Typical applications include BLDC and brushed DC motor control, home appliances, industrial control panels, HVAC fan control, low-end lighting controllers, and small-form-factor sensor interfaces. Its combination of EEPROM, ADC, analog comparator, and FlexTimer is well matched to closed-loop motor control and analog-front-end analog measurement tasks. When designing with this part, verify that the current firmware and toolchain versions still support the S08PA family given the NRND status. Confirm long-term supply through NXP or authorized distributors before committing to new designs. This page synthesizes distributor pricing, drop-in alternatives from the S08PA pin-compatible family, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08PA4VTGR - 8-bit S08 MCU, 4KB Flash, 16-TSSOP | NXP
MC9S08PA4VTGR

MC9S08PA4VTGR - 8-bit S08 MCU, 4KB Flash, 16-TSSOP | NXP

The NXP MC9S08PA4VTGR is an 8-bit S08 microcontroller built around the S08 central processor unit (CPU), delivering up to 20 MHz bus speed across a 2.7 V to 5.5 V operating range, packaged in a 16-pin TSSOP. It integrates 4 KB of flash program memory, 128 bytes of EEPROM, and 14 general-purpose I/O pins, with integrated LIN physical layer, PWM, and a watchdog timer for robust embedded control. The device supports up to 40 interrupt/reset sources and four-level nested interrupts, enabling real-time response in cost-sensitive automotive and industrial designs. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions 8 bits at a time, optimized for low cost, deterministic timing, and ease of use in motor control, sensor reading, and human-machine interface applications. Within the broader semiconductor taxonomy, the MC9S08PA4VTGR sits in the MCU -> 8-bit MCU -> automotive-grade MCU hierarchy. Compared with 16-bit or 32-bit MCUs, 8-bit parts such as the S08 family trade raw computational throughput for simpler peripherals, smaller code footprint, and lower power consumption, which is why they remain widely deployed in body electronics and LIN-bus nodes. Key features of the MC9S08PA4VTGR include an S08 CISC core with BDM (Background Debug Mode), 20 MHz maximum bus frequency, brown-out reset and low-voltage detect (LVD) for supply supervision, plus PWM, SCI (UART), SPI, and LIN slave/master connectivity. The integrated LIN 2.1 physical layer makes it a drop-in fit for automotive body networks where discrete LIN transceivers are not required. Internal clock sources include an FLL-stabilized internal reference, reducing external component count for cost-sensitive LIN nodes. The MC9S08PA4VTGR is qualified for high-temperature automotive operation up to 125 °C junction temperature and is specified for both 3.3 V and 5 V rails. The 16-TSSOP package provides a small footprint suitable for PCB-constrained body controllers and sensor interfaces, and the AEC-Q100 automotive qualification supports OEM qualification workflows. Typical applications include automotive body control modules, LIN-based sensor nodes, HVAC actuators, lighting control, seat and mirror modules, and low-cost industrial controllers. Designers favor this part where LIN communication, small flash memory, and AEC-Q100 reliability are required simultaneously. When designing with this device, pay close attention to the LIN master/slave role configuration in the SCI module and ensure the BDLC pull-up is correctly biased for in-vehicle network nodes. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives (including the tape-and-reel vs. tray variants of the same NXP die), and practical design notes not consolidated in the manufacturer datasheet, giving procurement and engineering teams a faster decision path.

Cotação Contato
MC9S08PA60VLF-FR - 60KB Flash 8-bit S08 MCU | NXP LQFP-48
MC9S08PA60VLF-FR

MC9S08PA60VLF-FR - 60KB Flash 8-bit S08 MCU | NXP LQFP-48

The NXP Semiconductors MC9S08PA60VLF-FR is a 5V 8-bit S08 microcontroller with 60KB of embedded Flash, 4KB of SRAM, and 256 bytes of EEPROM, housed in a 48-pin LQFP package. It operates up to 20 MHz bus across a 2.7 V to 5.5 V supply range and supports industrial temperatures from -40 °C to +105 °C. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals such as timers, ADCs, and communication interfaces. The S08 core family uses the Freescale/NXP S08 instruction set, an enhanced evolution of the HC08 architecture, with a 16-bit address space and on-chip hardware multiply/divide. Within the broader taxonomy, the S08PA sits as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. This part targets cost-sensitive embedded designs that require 5 V tolerance, robust ESD/EFT immunity, and a scalable peripheral set across the S08P family. Key features of the MC9S08PA60VLF-FR include a 12-channel 12-bit ADC, an analog comparator with internal 6-bit DAC reference, up to three timers including a 2-channel FlexTimer (FTM) with motor-control capability, up to two SCI (UART) modules, and one SPI. Internal 1 kHz LPO and 4–20 MHz ICS oscillators remove the need for an external crystal in many designs. The 48-LQFP pin-out exposes up to 39 GPIO with programmable drive strength, slew-rate control, and interrupt-on-edge. Hardware CRC, watchdog, and low-voltage detect improve functional safety. Typical applications include motor control (small BLDC and brushed DC drivers), home appliances and white goods, industrial control modules, lighting control, point-of-load control, and consumer electronics user interfaces. The wide 5 V supply tolerance makes it well suited for legacy 5 V rails in industrial plants and automotive body modules (non-safety sub-systems). When designing, ensure the VDD decoupling network (100 nF + 4.7 µF) is placed within 5 mm of the pins, route the ICS oscillator traces as guarded differential pairs, and avoid routing analog ADC channels across switching node return paths. The on-chip EEPROM with built-in charge pump supports in-application byte erase/write without external hardware. This page synthesizes NXP distributor pricing, same-family drop-in alternatives, and practical design notes that complement the manufacturer datasheet by enabling quick sourcing and footprint decisions.

Cotação Contato
MC9S08PA60VQH - S08 8-bit MCU, 60KB Flash, 64-QFP | NXP
MC9S08PA60VQH

MC9S08PA60VQH - S08 8-bit MCU, 60KB Flash, 64-QFP | NXP

The NXP MC9S08PA60VQH is an 8-bit S08PA family microcontroller featuring a 60 KB flash memory, 20 MHz CPU clock, and 57 general-purpose I/O pins in a 64-pin LQFP package (14 x 14 mm). It integrates on-chip EEPROM, ADC, analog comparator, PWM, and a motor-control FlexTimer to simplify embedded designs in cost-sensitive industrial and consumer applications. An 8-bit microcontroller (MCU) is a single-chip processor that integrates CPU, RAM, non-volatile program memory (Flash/ROM), and peripherals such as timers, ADC, and communication interfaces. Within the semiconductor taxonomy, an 8-bit MCU sits below 32-bit microcontrollers and above simple logic ICs in the integrated-circuits hierarchy: 8-bit MCU -> microcontroller -> microprocessor -> integrated circuit -> semiconductor. The S08PA family from NXP is positioned at the low end of the S08 line, offering 5 V operation and excellent EFT/ESD immunity for harsh electrical environments. The MC9S08PA60VQH operates from 2.7 V to 5.5 V supply, includes an internal clock source, and supports multiple low-power stop and wait modes for battery-powered applications. Connectivity is provided through I2C, SPI, LIN-bus, and UART/USART peripherals, while 8-bit and 16-bit timers, a 12-channel ADC, and a FlexTimer with PWM outputs target motor control and power-conversion designs. On-chip peripherals include low-voltage detection (LVD), power-on reset (POR), and a watchdog timer (WDT) for safety-critical embedded systems. According to NXP datasheet MC9S08PA60 Rev. 4 (09/2019), the device supports background debugging via the standard S08 BDM interface and is part of a scalable, pin-compatible S08P family for easy migration from older 8-bit S08 products. Typical applications include low-cost motor control (BLDC, stepper, and brushed DC), AC home appliances, HVAC controls, automotive body electronics (LIN nodes), and battery-powered sensor nodes. The on-chip EEPROM supports non-volatile parameter storage for field-configurable products, while the analog comparator enables zero-crossing detection without external components. When designing with this MCU, ensure the supply rail is well-decoupled with 100 nF plus 10 uF bulk capacitors placed close to VDD/VSS pairs. Use the internal clock generator with appropriate reference trimming for cost-sensitive designs, or an external crystal when communication baud-rate accuracy is required.

Cotação Contato
MC9S08PA8AVLD - 8-bit S08 MCU 8KB Flash 44-LQFP | NXP
MC9S08PA8AVLD

MC9S08PA8AVLD - 8-bit S08 MCU 8KB Flash 44-LQFP | NXP

The NXP MC9S08PA8AVLD is an 8-bit microcontroller based on the S08 CISC core, running at up to 20 MHz bus speed from a 2.7 V to 5.5 V supply, with 8 KB of flash memory in a 44-pin LQFP (10x10 mm) package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (flash), data memory (RAM), and peripherals such as timers, ADCs, and serial interfaces on one die. Within the product hierarchy, the S08P family sits under NXP's S08 core architecture, which itself belongs to the broader category of embedded microcontrollers and power-management ICs used in cost-sensitive embedded control systems. Key features of the MC9S08PA8AVLD include the S08 central processor unit supporting up to 20 MHz bus operation across the -40C to +105C temperature range, up to 40 interrupt/reset sources with four-level nested interrupt support, integrated EEPROM for data storage, an ADC and an analog comparator, and a motor-control flex timer. NXP highlights the family's excellent EFT/ESD performance and scalable, pin-compatible design that eases migration from legacy 8-bit S08 products. Architecturally, the S08 CPU reuses proven Freescale (now NXP) S08 core IP and development tools, allowing firmware written for older HC08/S08 devices to be ported with minimal changes. The on-chip flash is read/program/erase capable over the full voltage and temperature range, and the integrated EEPROM eliminates the need for an external non-volatile memory device, reducing bill-of-materials cost in small systems. Typical applications include cost-sensitive automotive body electronics, small motor control (using the flex timer), home appliances, consumer electronics, and simple industrial sensing nodes where an ADC and analog comparator are required but 32-bit performance is unnecessary. A key design consideration is supply voltage: the 2.7 V to 5.5 V range supports both 3.3 V and 5 V systems, but flash timing and analog accuracy specifications should be verified across the full voltage range per the manufacturer datasheet. Use the background debug interface for in-circuit flash programming. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC, Heisener and Octopart, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-10-18.

Cotação Contato
MC9S08PA8AVTG - 8-bit S08 MCU 8KB Flash 20MHz TSSOP-16 | NXP
MC9S08PA8AVTG

MC9S08PA8AVTG - 8-bit S08 MCU 8KB Flash 20MHz TSSOP-16 | NXP

The NXP Semiconductors MC9S08PA8AVTG is an 8-bit microcontroller based on the S08 (HCS08L) CISC core, running at up to 20 MHz with 8 KB of flash memory, integrated EEPROM, and a 16-pin TSSOP package. It operates from a 5V supply and integrates analog peripherals including an ADC and analog comparator, targeting cost-sensitive automotive and industrial applications. An 8-bit microcontroller is a self-contained computing device that integrates a CPU core, program memory (flash), data memory (RAM), and peripherals on a single chip. Within the power management and embedded control hierarchy, an MCU such as the S08PA family member sits at the lowest system layer, replacing discrete logic and analog control circuits with firmware-driven control, which reduces bill-of-materials cost and board area in high-volume products. Key features include 8 KB (8K x 8) of on-chip flash for code storage, on-board EEPROM for parameter retention without external memory, a 20 MHz internal bus clock, and an integrated analog comparator plus ADC that simplify mixed-signal designs. The flex timer peripheral supports motor control topologies such as PWM generation for BLDC and brushed DC drives, a distinguishing capability at this price point. Technically, the S08 core is a CISC architecture descended from the 6808/HCS08 lineage, offering dense code and mature development tool support through NXP CodeWarrior. Low-power modes allow sleep currents suitable for always-on automotive body functions, and the 5V operating range provides robust noise immunity in electrically harsh 12V vehicle environments where 3.3V parts require level shifting. Typical applications include automotive body electronics (door modules, seat control, lighting), small motor control drives, and industrial sensors and actuators where flash-plus-EEPROM integration eliminates external memory components. A key design consideration is supply decoupling: place a 100 nF ceramic capacitor directly at the VDD pin, and use the internal clock sources where possible to minimize external crystal cost, trading slight frequency accuracy for component savings. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-10-18.

Cotação Contato
MC9S08PA8VGT - 8-bit 20MHz 8KB Flash MCU | NXP TSSOP-16
MC9S08PA8VGT

MC9S08PA8VGT - 8-bit 20MHz 8KB Flash MCU | NXP TSSOP-16

The NXP MC9S08PA8VGT is an 8-bit microcontroller built on the HCS08L core, delivering 20MHz operation with 8KB of Flash memory in a 16-pin TSSOP package. It is part of the S08PA family optimized for cost-sensitive automotive and industrial applications requiring low-power modes and integrated analog peripherals. An 8-bit microcontroller (MCU) is a compact processor that integrates a CPU, memory, timers, communication peripherals, and analog functions onto a single silicon die. In the broader embedded taxonomy, 8-bit MCUs sit below 16-bit and 32-bit devices but above discrete logic in capability, making them well suited for real-time control where cost and power are dominant constraints and raw compute throughput is secondary. Key features of the MC9S08PA8VGT include 8KB of Flash program memory, 128 bytes of EEPROM, and up to 256 bytes of RAM. The device integrates a 12-channel 10-bit ADC, two analog comparators, three timers, and a multi-purpose PWM module. Low-power Run, Wait, and Stop modes with rapid wake-up time allow the MCU to support battery-friendly sensor interfaces and standby-friendly industrial node designs. Architecturally, the HCS08L core is a low-power variant of the Freescale/NXP HCS08 family, supporting the S08 instruction set with BDM (Background Debug Mode) and on-chip in-circuit programming for field updates. An integrated 1kHz low-frequency oscillator plus the option of an external crystal provide flexibility for low-power or precision timing designs. Typical applications include automotive body controllers, sensor signal conditioning modules, appliance control panels, remote keyless entry transmitters, and industrial low-power nodes. The wide operating voltage range and AEC-Q100-style qualification path make the MC9S08PA8VGT particularly attractive in automotive subsystems and ruggedized industrial sensors. When designing with this MCU, ensure the supply decoupling uses a 100nF ceramic capacitor placed within 5mm of each VDD pin, and that unused ADC inputs are tied to a defined voltage to prevent shoot-through. For low-noise analog sampling, configure the ADC clock below 4MHz to maintain data-sheet-grade linearity. This page synthesizes distributor pricing, drop-in alternatives, and design notes not consolidated in the original NXP datasheet - a practical reference for engineers evaluating or second-sourcing the MC9S08PA8VGT.

Cotação Contato
MC9S08PA8VLC - 8-bit S08 MCU 8KB Flash 32-LQFP | NXP
MC9S08PA8VLC

MC9S08PA8VLC - 8-bit S08 MCU 8KB Flash 32-LQFP | NXP

The NXP MC9S08PA8VLC is an 8-bit microcontroller from the S08PA family, built around the HCS08 core, integrating 8KB of Flash program memory in a 32-pin LQFP (7x7 mm) package. It operates over a wide supply range of 2.7 V to 5.5 V, runs at up to 20 MHz bus frequency, and delivers a balance of low power consumption and integrated peripherals for cost-sensitive embedded designs. An 8-bit MCU is a microcontroller whose central processing unit performs arithmetic and logic on 8-bit data words, sufficient for simple control loops, user-interface logic, sensor reading, and actuator driving without the software overhead of a 32-bit core. The MC9S08PA8VLC belongs to the broader category of microcontrollers -> embedded processors -> semiconductor ICs, placing it squarely in the lowest tier of complexity but with the smallest bill of materials for typical appliance, lighting, and motor-control nodes. Key features include 8KB on-chip Flash, 2KB SRAM, an integrated 12-bit SAR ADC with up to 16 channels, an analog comparator, hardware timers including a FlexTimer for motor control, EEPROM, an 8-bit keyboard interrupt module, and a touch-sensing interface (TSI). The S08 core uses a HCS08 instruction set with background debug mode, enabling in-circuit programming and on-chip debug through a single-wire BDM interface. The 32-pin LQFP and a 20 MHz clock allow the device to replace legacy HC08 designs with negligible code porting effort. Typical applications include BLDC ceiling-fan motor control, washing-machine control boards, induction cooktops, low-end smoke detectors, and simple sensor hubs. The integrated FlexTimer and analog comparator make it well suited for low-cost variable-frequency drive and hardware-protect functions. A typical design uses the ADC for current sensing and the comparator for over-current hardware shutdown. Design tradeoffs include limited code space (8KB Flash) and absence of USB or CAN, which restrict use in connected designs; for those, choose the larger S08AC or Kinetis E series. When laying out the PCB, keep the decoupling capacitor within 5 mm of the VDD pin to meet in-circuit noise requirements during ADC conversions. XAIPART synthesizes distributor pricing, drop-in alternatives, and design notes not always captured in the manufacturer datasheet, including the lifecycle status shown on NXP's product page.

Cotação Contato
MC9S08PA8VLD - 8-Bit 20MHz S08 Microcontroller | NXP
MC9S08PA8VLD

MC9S08PA8VLD - 8-Bit 20MHz S08 Microcontroller | NXP

NXP Semiconductors MC9S08PA8VLD is an 8-bit S08 microcontroller with 8 KB of flash memory, 512 bytes of RAM, a 16-bit timer, an analog-to-digital converter, and an analog comparator. It is offered in a 44-pin LQFP package measuring 10 mm by 10 mm. The distributor product listing identifies a maximum clock frequency of 20 MHz, making the device suitable for compact embedded-control systems that require deterministic peripheral operation and a modest amount of nonvolatile program memory. A microcontroller is a semiconductor device that combines a processor core, memory, and configurable peripherals on one integrated circuit. The 8-bit S08 core belongs to the broader MCU category and is intended for embedded control rather than high-performance computing. MC9S08PA8VLD combines that processor architecture with flash, RAM, timer, ADC, and comparator resources, allowing a design to sense analog inputs, execute control logic, and operate external actuators from a relatively compact package. The principal feature set supports cost-sensitive embedded applications. Eight kilobytes of flash provides room for the application program and fixed data, while 512 bytes of RAM support working variables and stack activity. The integrated 16-bit timer is useful for periodic scheduling, event counting, pulse measurement, and motor-control timing. The ADC supports analog measurement, and the analog comparator provides a lower-complexity threshold-detection function for sensor and protection circuits. MC9S08PA8VLD is associated with cost-sensitive automotive and consumer applications, according to NXP product information. Its 44-LQFP package exposes more interface pins than a small-outline package and can simplify access to port pins, timer channels, analog inputs, debug functions, and power connections. The 10 mm by 10 mm body provides a practical land pattern for conventional through-hole assembly or mixed-technology PCB assembly, subject to the detailed pin and layout guidance in the NXP documentation. Typical uses include automotive body and accessory controllers, consumer-control modules, small motor-control systems, appliance control boards, and compact sensing products. The timer and analog resources allow a single MCU to coordinate periodic actions and monitor external signals without requiring separate analog or timing ICs. This integration can reduce board area and simplify firmware architecture when the control algorithm does not require a higher-bit-width processor. Design work should begin with the NXP datasheet pin-description table, electrical characteristics, and reference manual. Confirm the selected clock configuration, oscillator requirements, programming method, reset behavior, and decoupling requirements before layout. Because pin multiplexing and legacy 8-bit MCU timing can constrain peripheral assignments, validate every motor, ADC, and communication signal against the package pinout rather than relying on a generic S08PA board pattern. This product page combines manufacturer status information, distributor specifications, package details, application guidance, and replacement screening. It also distinguishes verified device characteristics from parameters that must be confirmed in the official documentation, helping engineers plan assembly, firmware development, and lifecycle-aware sourcing without relying on generic MCU assumptions.

Cotação Contato
MC9S08PA8VTJ - 8-Bit 20MHz S08 MCU | NXP | 20-TSSOP
MC9S08PA8VTJ

MC9S08PA8VTJ - 8-Bit 20MHz S08 MCU | NXP | 20-TSSOP

NXP Semiconductors MC9S08PA8VTJ is an 8-bit S08 microcontroller with a 20 MHz CPU, 8 KB of flash memory, integrated analog peripherals, and a 20-TSSOP package. It operates across a 2.7 V to 5.5 V supply range and supports industrial temperature operation from -40°C to 105°C. The device is listed by NXP as NRND, so engineers should confirm availability and lifecycle plans before starting a new production design. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The S08 core places the MC9S08PA8VTJ in the 8-bit microcontroller category, where instruction efficiency, deterministic control behavior, and low system complexity are more important than the high processing throughput associated with 32-bit applications. This S08PA family combines an economical embedded-control platform with analog functions suited to sensing, monitoring, and actuator-control systems. The MC9S08PA8VTJ includes 8 KB of flash program memory, an EEPROM capability, an analog-to-digital converter, an analog comparator, and a motor-control Flex Timer. These resources allow a compact control board to acquire analog inputs, execute control algorithms, operate timers, and drive outputs without requiring several separate peripheral devices. Its 20 MHz bus operation provides a practical balance between responsiveness, power consumption, and code execution performance for cost-sensitive embedded products. The S08PA family uses established S08 processor architecture and reusable peripheral IP, which can simplify migration and tooling decisions within the NXP ecosystem. The 20-TSSOP package is intended for compact surface-mount assemblies and offers adequate pin access for power, clock, reset, programming, analog, and digital I/O functions. Engineers should assign pins by consulting the manufacturer pin-description table and account for programming and debug requirements in the PCB layout. Typical uses include industrial sensor interfaces, compact motor-control systems, building and appliance controls, low-cost instrumentation, and small embedded measurement equipment. The analog input and timer resources are particularly useful when a design must monitor changing physical signals while maintaining predictable timing. Compared with a larger MCU, the device offers a smaller 8-bit architecture and a simpler software ecosystem, but it provides less memory and processing capacity for connectivity-heavy or graphics-oriented products. Design attention should focus on decoupling, clock configuration, programming access, analog-reference integrity, and exposed-pin thermal limitations. Place input and output capacitors close to their associated pins, route sensitive analog signals away from fast-switching nodes, and use the manufacturer reference design as the basis for board-level implementation. This page combines lifecycle information, package details, technical positioning, application guidance, and replacement considerations for faster engineering evaluation. For sourcing, use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and package-specific pricing. Because the device is marked NRND, confirm whether an active family member better matches the production program or whether an exception approval is required for continued use.

Cotação Contato
MC9S08PB8MTJ - 20MHz 8-Bit 8KB Flash MCU | NXP
MC9S08PB8MTJ

MC9S08PB8MTJ - 20MHz 8-Bit 8KB Flash MCU | NXP

The NXP Semiconductors MC9S08PB8MTJ is an 8-bit S08 microcontroller with a 20 MHz operating frequency, 8 KB of flash program memory, and a 5 V supply architecture in a 20-pin TSSOP package. It belongs to the S08PB family, which combines a compact general-purpose microcontroller with integrated analog resources for cost-sensitive embedded control systems. An 8-bit microcontroller is a programmable semiconductor that executes firmware from embedded flash memory and controls sensors, actuators, communications interfaces, and digital logic. The MC9S08PB8MTJ uses the S08 architecture, placing a general-purpose CPU, memory, timers, serial interfaces, and analog peripherals within one device. Its 5 V operating focus makes it suitable for industrial, consumer, appliance, and portable equipment designs that use legacy-compatible 5 V signaling. Key features include 8 KB flash memory, an integrated 12-bit analog-to-digital converter, an analog comparator, an analog amplifier, I2C communication, and flexible timers. The 20 MHz CPU provides deterministic control for motor, power, and measurement functions, while the analog peripherals reduce the need for external discrete circuitry. NXP describes the S08PB family as scalable and pin-compatible, supporting migration across related S08 products while retaining the same core, intellectual property, and software tools. The device’s mixed-signal architecture is significant because sensor inputs can be digitized without a separate ADC, threshold decisions can be handled by the comparator, and small analog signals can be conditioned by the amplifier. I2C enables connection to sensors, EEPROMs, display controllers, and other serial peripherals, while the timer resources support periodic measurement, timing, pulse generation, and motor-control functions. The S08 core and established toolchain also reduce firmware migration effort for existing S08 designs. Typical applications include consumer appliance control, industrial sensing, power-system monitoring, temperature measurement, small motor control, energy metering, and compact embedded control panels. Its 20-pin TSSOP package supports conventional surface-mount assembly, while 8 KB of flash supports compact firmware, state-machine logic, calibration tables, and application-specific communication routines. The integrated analog features are particularly useful where board area and component count are important constraints. When laying out the circuit, place decoupling capacitance at the supply pins and route analog inputs away from switching nodes and high-current return paths. Confirm the required external crystal, clock, reset, and programming connections against the NXP datasheet before finalizing the PCB. Use the device’s 5 V analog and digital design limits when selecting external sensor and interface components. This product page combines manufacturer specifications, package information, application guidance, design checks, and replacement guidance in a format designed to help engineers evaluate the MC9S08PB8MTJ before schematic capture, PCB layout, firmware development, and sourcing.

Cotação Contato
MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP
MC9S08PL32CLC

MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP

The NXP MC9S08PL32CLC is an 8-bit S08 microcontroller featuring an HCS08L core running at 20 MHz, 32 KB of embedded Flash program memory and 256 B of EEPROM, housed in a 32-pin LQFP (7x7 mm) package. It is part of the cost-effective, 5 V S08PL family targeted at appliances, motor control and consumer industrial designs. An 8-bit microcontroller (MCU) is a small, single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a set of peripherals such as timers, ADC and communication interfaces on one die. The S08 family sits in the 8-bit MCU hierarchy below 32-bit Cortex-M parts but above simple hardware controllers: S08 -> HCS08 core -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The S08PL line in particular emphasises 5 V I/O tolerance, integrated EEPROM and strong EFT/ESD performance for harsh environments. Key features include 4 KB SRAM, a 10-bit ADC with multiple channels, an analog comparator, flexible timers (including TPM and PWT), and a 20 MHz bus clock derived from an internal clock source. The MCU operates from 2.7 V to 5.5 V and supports industrial-grade ambient temperatures. The 32-LQFP footprint exposes up to 28 general-purpose I/O pins and integrates an SCI/UART plus SPI and I2C communication channels. The S08 architecture uses a von-Neumann bus with an HCS08 enhanced instruction set, including multiply and divide, and a BDM (Background Debug Mode) interface for in-circuit programming and debug. Internal EEPROM emulates data-logging or user-configuration storage without external serial memory, and the 10-bit ADC supports both scan and single conversion modes. Typical applications include white-goods and small home appliances, low-end motor control (BLDC, PMSM, brushed DC), lighting controls, user-interface boards, and battery-operated 5 V industrial sensors. The 5 V tolerance makes it a clean replacement for legacy 5 V designs that need extra Flash headroom. When designing, route the VDDA/VSS analog pair separately from the digital supply to preserve ADC accuracy, and follow NXP's S08PL reference manual for layout. The internal EEPROM is rated for a finite endurance; structure writes carefully to avoid premature wear. This page synthesises distributor pricing, drop-in NXP S08PL/S08PA family alternatives and practical design notes not collected on a single OEM page.

Cotação Contato
MC9S08PL32CLF - 8-Bit 20MHz 32KB MCU | NXP | 48-LQFP
MC9S08PL32CLF

MC9S08PL32CLF - 8-Bit 20MHz 32KB MCU | NXP | 48-LQFP

The NXP Semiconductors MC9S08PL32CLF is an 8-bit S08 microcontroller operating at up to 20 MHz, with 32 KB of flash memory and a 48-LQFP 7x7 mm package. It is designed for embedded control applications requiring a compact 8-bit MCU, integrated LCD-oriented connectivity, and low-power operation. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The S08 MCU family belongs to the embedded-controller hierarchy: 8-bit microcontroller -> S08 embedded controller -> semiconductor. This part is intended to consolidate local control, display interaction, sensing inputs, and communication functions into one low-power device. Verified distributor data identifies the device as an S08 microcontroller with 8-bit architecture, 20 MHz maximum frequency, 32 KB flash memory organized as 32K x 8, and a 48-LQFP 7x7 mm package. The flash memory provides a practical firmware storage region for embedded products. The exact RAM size, supply voltage range, pin assignments, temperature limits, and peripheral details require confirmation from the manufacturer datasheet. The part designation indicates an S08PL32-series device and an LF package suffix, but package temperature, lead-free status, and lifecycle classification are not confirmed in the supplied data. The manufacturer’s current status should therefore be checked before committing to new production. Rochester Electronics and DigiKey listings indicate that this exact part is available through distribution channels, while an official Freescale/NXP datasheet link was not included in the retrieved results. Typical uses include keypad and user-interface controllers, small industrial control panels, sensor-conditioning nodes, and low-power embedded instruments where an LCD driver and touch-oriented S08 peripherals are useful. Because the available verified data does not include the complete electrical and pinout tables, a production design should verify all connections, decoupling, programming, and timing requirements against the authoritative datasheet before PCB release. For layout, place the required decoupling capacitors close to the supply pins and preserve the package’s exposed thermal and routing requirements. Confirm programming, reset, clock, LCD, and I/O multiplexing in the datasheet rather than inferring them from the family name. The MC9S08PL32CLF is best evaluated for new designs when the 8-bit S08 software ecosystem and 20 MHz performance fit the system requirements. This page summarizes verified distributor specifications, separates confirmed data from missing technical fields, and provides sourcing and engineering guidance without inventing datasheet values or a pinout.

Cotação Contato
MC9S08PL4CTG - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP
MC9S08PL4CTG

MC9S08PL4CTG - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08PL4CTG is an 8-bit S08 microcontroller with a 20 MHz internal bus, 4 KB of embedded flash memory and 512 bytes of RAM, packaged in a 16-pin TSSOP (DIP-style) surface-mount package. It is designed for cost-sensitive embedded control and is supported from a 2.7 V to 5.5 V supply across a -40 °C to +85 °C temperature range, making it equally suited to industrial control boards and battery-fed portable consumer products. A microcontroller is a programmable system-on-chip that integrates a CPU core, non-volatile program memory, data memory, and peripherals such as analog converters, timers, and communication interfaces onto one die. The S08 family from NXP is a cost-oriented 8-bit architecture built around a simple, highly deterministic instruction set, an on-chip bus with programmable clock prescalers, and a rich interrupt controller, which maps into the broader hierarchy of embedded processor, microcontroller, and semiconductor product categories. Key features of the MC9S08PL4CTG include on-chip EEPROM for parameter storage, a 10-bit analog-to-digital converter, an analog comparator, flexible timer modules for periodic and PWM generation, and support for up to 40 interrupt and reset sources with four levels of nested interrupt handling. The 20 MHz bus speed gives adequate headroom for protocol handling, sensor sampling, and simple motor or relay control, while the low-power design targets portable and industrial-control applications. Architecturally, the device separates an 8-bit S08 central processor unit with a 16-bit timer capability from dedicated peripheral subsystems. The on-chip EEPROM removes the need for an external non-volatile memory device for calibration data or serial numbers, while the 10-bit ADC with analog comparator supports direct sensing of thermistors, potentiometers, and battery rails without external signal conditioning. Typical applications include low-cost consumer remote controls, small appliance controllers, battery-operated sensors, motor and valve control modules, LED driver boards, and compact industrial sensing nodes where a 16-pin footprint and 5 V or 3.3 V operation are hard requirements. A key design consideration is that the S08PL family is a small-memory platform: 4 KB of flash limits application code size, so time-critical or code-heavy designs should be evaluated against the larger MC9S08QE family in the same 16-TSSOP footprint. Budget for external flash only if the pin count allows it. This page consolidates manufacturer specifications, package and pinout references, drop-in alternatives in the same footprint, and practical layout and firmware guidance that are not gathered in a single place in the original MC9S08PL4 series datasheet.

Cotação Contato
MC9S08PL60CLH - 20MHz 8-Bit 60KB Flash MCU | NXP
MC9S08PL60CLH

MC9S08PL60CLH - 20MHz 8-Bit 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08PL60CLH is an 8-bit S08 microcontroller with a 20 MHz bus, 60 KB of flash memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It operates from 2.7 V to 5.5 V across the stated temperature range and is positioned for embedded control systems requiring broad connectivity and deterministic 8-bit processing. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The S08 architecture belongs to the embedded microcontroller hierarchy, where firmware executes control logic for motors, sensors, communications, human-interface functions, and industrial equipment. The MC9S08PL60CLH provides 60 Kbytes of flash for firmware storage and is identified as an S08 S08 microcontroller IC with 64 pins. The supplied manufacturer-related listing identifies the device as an 8-bit, 20 MHz part with 60 KB, or 60 K × 8 bits, of flash memory. Its 2.7 V to 5.5 V operating range supports both lower-voltage and 5 V system designs, while the 64-LQFP package provides a relatively high pin count for external peripheral connections. The package is identified as 10 mm by 10 mm in distributor and technical listings. Typical design use includes embedded control nodes, sensor conditioning, actuator control, communications gateways, and compact industrial modules. The 20 MHz bus can improve responsiveness for interrupt-driven and event-based firmware compared with slower general-purpose 8-bit controllers, but final timing must be validated against the operating voltage, peripheral configuration, and clock settings in the manufacturer datasheet. A key engineering consideration is power and signal integrity. Decoupling, exposed-pad or thermal management requirements, unused-pin handling, and the exact 64-pin assignment should be taken directly from the MC9S08PL60 datasheet. Do not infer pin functions or peripheral availability from distributor summaries alone. This page combines verified manufacturer and distributor information, structured availability context, application guidance, and source-linked engineering notes. Because the provided data does not include numeric pricing, complete pin assignments, detailed electrical limits, or validated substitute parameters, those fields remain explicitly marked for data completion rather than being guessed.

Cotação Contato
MC9S08PT16AVWJ - 8-bit S08 MCU 16KB Flash 20MHz SOIC-20 | NXP
MC9S08PT16AVWJ

MC9S08PT16AVWJ - 8-bit S08 MCU 16KB Flash 20MHz SOIC-20 | NXP

The NXP Semiconductors MC9S08PT16AVWJ is an 8-bit S08 (HCS08) microcontroller with 16 KB flash memory, 20 MHz bus speed at 2.7 V to 5.5 V operation, and a 20-pin SOIC (VW) package. It integrates a PWM module, ADC, UART, and EEPROM with Touch Sensing Interface (TSI), and is rated for -40 C to +105 C operation across the full supply range. An 8-bit microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, positioned within the broader hierarchy as MCU -> embedded processor -> semiconductor. The S08 family from NXP is a widely deployed 8-bit architecture used in cost-sensitive embedded control, sitting alongside NXP's Kinetis ARM-based MCUs in the company's embedded processing portfolio. Key features of the MC9S08PT16AVWJ include the 8-bit S08 CPU supporting up to 20 MHz bus clock, up to 40 interrupt/reset sources with four-level nested interrupts, 16 KB of flash program memory, and 2 KB of RAM. The integrated PWM module supports motor drive and power conversion applications, while the on-chip ADC enables analog sensing and the UART provides serial communication for industrial and consumer products. From an architecture standpoint, the S08 core is an enhanced HCS08 CPU with efficient C-code execution, background debug mode for non-intrusive development, and low-power wait and stop modes that reduce current consumption in battery-operated and always-on designs. The wide 2.7 V to 5.5 V operating range allows direct connection to 3.3 V and 5 V systems without level shifting. Typical applications include small motor control (fans, pumps, tools) using the PWM module, household appliance control, power supply and battery charger supervision, and touch-sensitive user interfaces exploiting the on-chip TSI peripheral. A key design consideration is flash programming: the part supports in-circuit flash programming via the single-wire background debug interface, so plan the BDM connector footprint early in the PCB layout. This page synthesizes distributor availability data, drop-in alternatives from the S08PT family, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
MC9S08PT16VLD - 8-Bit 20MHz MCU, 16KB Flash | NXP | Industrial
MC9S08PT16VLD

MC9S08PT16VLD - 8-Bit 20MHz MCU, 16KB Flash | NXP | Industrial

The NXP Semiconductors MC9S08PT16VLD is an 8-bit S08 microcontroller operating at up to 20 MHz, with 16 KB of Flash memory and a 44-LQFP 10 mm × 10 mm package. The device operates from 2.7 V to 5.5 V across a -40 °C to 105 °C temperature range, making it suitable for embedded control, touch sensing, and motor-control designs. The MC9S08PT16VLD belongs to the S08P microcontroller family, combining an 8-bit S08 CPU with integrated EEPROM, touch-sensing interface resources, and a motor-control Flex Timer. Its support for up to 40 interrupt or reset sources and up to four levels of nested interrupts helps organize real-time control software without requiring a larger processor architecture. The family also emphasizes pin compatibility, core reuse, and familiar S08 development tools for easier migration within related designs. According to the NXP MC9S08PT16 series datasheet, the MCU supports a bus frequency of up to 20 MHz over the specified 2.7 V to 5.5 V operating range. The S08PT family is positioned for compact embedded systems that need deterministic control, mixed analog and digital functions, and low system complexity. The 16 KB Flash configuration provides a defined code-storage option for small control tasks, while the integrated peripherals reduce the need for external support components. Typical uses include touch-controlled interfaces, small motor-control systems, appliance control, industrial control modules, and compact consumer products. The 44-LQFP package exposes more I/O and peripheral connections than the smallest microcontrollers, which is useful when the design needs multiple inputs, outputs, communication resources, or timer channels. Selection should still be based on the exact peripheral mapping and pin-level requirements for the target board. A key design consideration is the device’s operating voltage and timing margin. Firmware, clock settings, reset behavior, and external component choices must be validated together across the full 2.7 V to 5.5 V supply range. The package and pinout should be checked against the manufacturer schematic and datasheet before PCB release, especially when using touch inputs or motor-control outputs. This page consolidates the verified NXP product information, distributor listings, datasheet reference, lifecycle information, package details, and application guidance for engineers evaluating the MC9S08PT16VLD.

Cotação Contato
MC9S08PT16VTG - 8-bit S08 MCU, 16KB Flash, 20MHz | NXP
MC9S08PT16VTG

MC9S08PT16VTG - 8-bit S08 MCU, 16KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08PT16VTG is an 8-bit S08 (HCS08) microcontroller with up to 20 MHz bus frequency, 16KB (16K x 8) flash memory, and a 2.7V to 5.5V operating supply, housed in a 16-pin TSSOP surface-mount package. It operates across the full -40C to +105C automotive-grade temperature range. An 8-bit MCU is a microcontroller whose CPU processes data in 8-bit words. Within the semiconductor hierarchy, the MC9S08PT16VTG belongs to the NXP S08P family, which descends from the Freescale HCS08 core lineage: S08 CPU -> 8-bit microcontroller -> embedded processor. 8-bit MCUs of this class dominate cost-sensitive embedded control tasks where 32-bit processors would add unnecessary cost, power, and complexity. The S08PT family integrates a touch sensing interface (TSI), on-chip EEPROM, and a motor-control flex timer (FTM), reducing external component count and system BOM cost. NXP documents up to 40 interrupt/reset sources with four-level nested interrupt support, and the family is noted for excellent EFT/ESD robustness on its 5V-tolerant I/O. The 20 MHz bus operation is sustained from 2.7V to 5.5V across the entire -40C to +105C range, a parameter margin few 8-bit competitors match. Architecturally, the part reuses the proven S08 CISC core, IP, and development tools, allowing direct migration from legacy 8-bit S08 designs such as the MC9S08AW, MC9S08DV, and MC9S08QG series. Flash (16KB) is complemented by on-chip EEPROM for parameter storage, eliminating a separate serial EEPROM in many designs. Typical applications include capacitive touch user interfaces, small motor control (fans, pumps, actuators) using the flex timer, appliance and white-goods control boards, automotive body electronics, and low-power industrial sensors. Design consideration: NRND (Not Recommended for New Designs) status means the device is fully supported for existing designs, but new designs should evaluate flash-compatible siblings or plan an end-of-life migration path in advance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08PT16VTJ - 8-Bit S08 MCU, 16KB Flash, 20MHz | NXP
MC9S08PT16VTJ

MC9S08PT16VTJ - 8-Bit S08 MCU, 16KB Flash, 20MHz | NXP

The NXP MC9S08PT16VTJ is an 8-bit S08 microcontroller (MCU) featuring a 16 KB Flash program memory, a 20 MHz HCS08L core, and a 20-pin TSSOP package. It integrates a touch sensing interface (TSI), on-chip EEPROM, and a motor-control FlexTimer to simplify design and reduce system cost in cost-sensitive embedded products. The device operates from 2.7 V to 5.5 V across a -40 °C to +105 °C industrial temperature range, supporting wide battery and bus-powered applications. The TSSOP-20 form factor suits dense PCB layouts in white goods, motor-control boards, and human-interface modules. An 8-bit microcontroller is a small, low-power processor that executes instructions on 8-bit data words and is widely used in cost- and power-constrained embedded systems. Within the broader taxonomy, the MC9S08PT16VTJ belongs to the microcontroller family, a subset of microprocessors and integrated circuits (ICs). The S08 core implements the HCS08 instruction set with CISC (Complex Instruction Set Computer) architecture, providing deterministic interrupt response for real-time control loops and easy code portability across the S08 family. Supporting up to 40 interrupt/reset sources and four-level nested interrupts, the S08 core is well-suited to multi-task motor and user-interface systems. Key differentiating features of the MC9S08PT16VTJ include 16 KB of Flash, 2 KB of SRAM, 256 B of EEPROM, a 10-bit ADC, and integrated peripherals such as an I2C/SPI/UART communication set, a FlexTimer with PWM channels for motor control, and a touch-sensing interface (TSI) supporting capacitive touch buttons or sliders without external components. Its low-power run and wait modes, with typical currents in the microamp range, enable battery-friendly designs in portable appliances. The 20 MHz bus at 2.7 V to 5.5 V ensures consistent compute throughput, while the -40 °C to +105 °C operating range covers industrial, consumer, and appliance environments. From an architecture perspective, the S08PT family uses a Harvard-style architecture with separate Flash program and SRAM data paths, supporting background debugging via the standard Background Debug Mode (BDM) interface. On-chip peripherals are mapped to a unified memory space, with interrupt vectors handled in hardware to minimize jitter. The integrated voltage regulator supports a single 3.3 V or 5 V supply rail, eliminating external LDO requirements in typical applications and reducing BOM count. Typical applications include brushless DC (BLDC) and brushed DC motor control in small appliances, capacitive-touch user interfaces for kitchen and home appliances, industrial sensor conditioning nodes, lighting control modules, and low-cost consumer devices requiring USB or human-machine interface (HMI). The combination of TSI, FlexTimer PWM, and ADC makes the MC9S08PT16VTJ a strong fit for cost-optimised motor-and-touch HMI platforms. When designing with the MC9S08PT16VTJ, ensure that the supply decoupling capacitors (typically 100 nF plus a bulk capacitor) are placed as close as possible to the VDD/VSS pins. For motor-control applications, isolate the analog and digital grounds to prevent switching noise from coupling into the ADC inputs, and use the TSI shielding electrode pattern from the NXP application notes to improve moisture-tolerant touch performance. This page synthesizes distributor pricing, NRND lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select, source, and design with the MC9S08PT16VTJ confidently.

Cotação Contato