Microcontroladores

Produtos (20.000+)

MC9S08PT16VWJ - 8-bit S08 MCU, 16KB Flash, 20MHz, SOIC-20 | NXP
MC9S08PT16VWJ

MC9S08PT16VWJ - 8-bit S08 MCU, 16KB Flash, 20MHz, SOIC-20 | NXP

The NXP Semiconductors MC9S08PT16VWJ is an 8-bit S08 microcontroller built on NXP's S08 central processor unit, delivering up to 20 MHz bus speed, 16 KB of on-chip Flash, and an integrated touch-sensing interface (TSI) in a 20-pin SOIC package. The device operates from 2.7 V to 5.5 V across an industrial temperature range of -40 °C to +105 °C, with up to 40 interrupt/reset sources and four-level nested interrupts for responsive event handling. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, memory (Flash/ROM/RAM), and peripherals such as timers, ADCs, and communication interfaces onto one die. The S08 architecture is NXP's low-power, deterministic 8-bit core family that prioritizes low BOM cost, robust electromagnetic compatibility (EMC), and pin-compatible scalability across the S08PT sub-family. Within the broader taxonomy, the MC9S08PT16 belongs to the 8-bit MCU category -> microcontroller -> embedded processor -> semiconductor. Key features of the MC9S08PT16VWJ include 16 KB (16K x 8) Flash program memory, on-chip EEPROM for data storage, a motor-control FlexTimer (FTM) module, multiple low-power modes, an integrated TSI for capacitive touch buttons, and excellent EFT/ESD performance for industrial and appliance environments. The 8-bit CPU executes most instructions in one to two bus cycles, which gives deterministic throughput for real-time control loops. The S08PT family is built on a 5V process that simplifies analog/mixed-signal interfacing, and the PT sub-family adds peripherals (TSE/EEPROM/FlexTimer) tuned for cost-sensitive motor, lighting, and human-interface designs. Pin-compatibility across the S08PT family allows migration between 8 KB and 16 KB Flash variants without PCB rework. Typical applications include small appliance control motor control, capacitive touch user interfaces, LED lighting controllers, building automation sensor nodes, and low-cost industrial controllers. The wide 5 V supply tolerance and strong EMC make the MC9S08PT16VWJ especially attractive for white-goods and appliance platforms. When designing with this device, ensure that the TSI electrode geometry follows NXP's TSI hardware guidelines to maximize touch sensitivity and minimize false triggers. Use NXP's CodeWarrior or the S08 peripheral configuration tooling to generate the FlexTimer and ADC initializations, and place a decoupling capacitor within 5 mm of every supply pin.

Cotação Contato
MC9S08PT32AVLD - 8-bit S08 MCU, 32KB Flash, 44-LQFP | NXP
MC9S08PT32AVLD

MC9S08PT32AVLD - 8-bit S08 MCU, 32KB Flash, 44-LQFP | NXP

The NXP MC9S08PT32AVLD is a 8-bit S08 CISC microcontroller featuring 32KB of flash program memory, 2KB of RAM, and 256 bytes of EEPROM, housed in a 44-pin LQFP (10x10 mm) surface-mount package. It integrates an HCS08L-class CPU core running at up to 20 MHz with a 5V-tolerant wide operating range, an internal 12-channel ADC, a Touch Sensing Interface (TSI), and a motor-control FlexTimer. An 8-bit microcontroller (MCU) is a programmable computational device that executes firmware from on-chip non-volatile memory and interfaces to sensors, actuators, and external digital systems via general-purpose I/O, timers, and communication peripherals. The MC9S08PT32AVLD sits within the broader microcontroller taxonomy as: 8-bit MCU -> S08 family -> HCS08 core -> NXP automotive/industrial microcontrollers. Compared to 32-bit ARM Cortex-M0 parts, an 8-bit HCS08 offers a smaller instruction set, lower cost per unit, and deterministic interrupt latency suitable for simple control loops. Key features include 37 general-purpose I/O lines, an integrated 2.5V bandgap reference, a low-voltage detection (LVD) module, power-on reset (POR), a watchdog timer (WDT), a real-time clock, and an analog comparator. The TSI block enables capacitive touch sensing without an external touch controller, while the motor-control FlexTimer supports PWM generation for brushed DC and stepper motor drive. Communication peripherals cover I2C, SPI, UART/USART, and LINbus, simplifying in-vehicle networking nodes. The S08 core uses a von Neumann architecture with a single 16-bit index register and a compact CISC instruction set, allowing efficient code generation from C compilers and assembler. The 5V-tolerant I/O simplifies direct interfacing to legacy analog and digital circuits without level shifters, and the wide 2.7V-5.5V supply range supports both 3.3V and 5V system designs. Typical applications include appliance control boards, HVAC fan drivers, simple BLDC and brushed DC motor control, capacitive touch user interfaces, automotive body controllers, and LIN slave nodes. The combination of TSI, FlexTimer, and LINbus makes the MC9S08PT32AVLD particularly attractive for cost-sensitive human-machine interface (HMI) modules. When designing with this MCU, place a 100 nF decoupling capacitor close to each VDD pin and a bulk 4.7uF capacitor on the main supply rail. The TSI electrode layout requires guarded traces and proper grounding to achieve reliable touch sensitivity. Code security is enforced by enabling flash security bits to prevent unauthorized firmware read-out. This page synthesizes distributor pricing, drop-in 44-LQFP alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08PT32VLC-FR - 8-bit S08 MCU 32KB Flash LQFP-32 | NXP
MC9S08PT32VLC-FR

MC9S08PT32VLC-FR - 8-bit S08 MCU 32KB Flash LQFP-32 | NXP

The NXP Semiconductors MC9S08PT32VLC-FR is an 8-bit S08PT microcontroller with 32KB Flash, 4KB RAM and a 20 MHz CPU core, housed in a 32-pin LQFP (7x7 mm) package. The part integrates a Touch Sensing Interface (TSI), 256-byte EEPROM, a motor-control FlexTimer, and 28 general-purpose I/O pins, addressing both capacitive-touch sensing and small motor-control designs in a single chip. An 8-bit microcontroller (MCU) is an integrated processor that combines a CPU, non-volatile program memory, RAM, and a set of on-chip peripherals in a single package. MCUs sit at the bottom of the embedded-processor hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU -> microprocessor) and are typically selected for cost-sensitive or deterministic control tasks where software complexity is moderate and power budget is tight. The S08 family is Freescale/NXP's 5V-tolerant HCS08 derivative line, optimized for automotive-grade electromagnetic robustness (EFT/ESD) and pin-compatibility across the S08P sub-family. Key features include 2.7 V to 5.5 V single-supply operation, an internal oscillator, a 16-channel 12-bit ADC, LVD/POR/Watchdog, and PWM outputs. Connectivity peripherals cover I2C, SPI, UART/USART and LIN-bus, making the device a fit for both human-machine-interface (HMI) and in-vehicle body-control networks. The architecture centers on a CISC S08 core with single-cycle bit manipulation, an integrated bandgap reference, and a Flash controller with byte-erasable sectors. The TSI block uses a relaxation-oscillator topology that lets a pin double as a touch electrode without an external RC, while the FlexTimer (FTM) provides complementary PWM channels for brushed DC or BLDC commutation at low switching frequencies. Typical applications include appliance user-interface panels with capacitive buttons, small BLDC or brushed-DC motor controllers, LIN-slave body modules, and 5V industrial sensor nodes. The combination of on-chip EEPROM and TSI keeps BOM cost low by removing external touch ICs and parameter-storage memories. When designing with this part, allocate one of the 32 LQFP pins for the BKGD/MS debug interface to preserve in-circuit programming access through all board revisions. The 20 MHz bus clock leaves roughly 50 ns per instruction cycle, so debounce loops and PWM update rates should be budgeted against that cycle time. This page consolidates current distributor inventory, same-package drop-in alternatives, and design notes that complement - but do not replace - the NXP datasheet and reference manual.

Cotação Contato
MC9S08PT32VLF - 32KB Flash 8-bit S08 MCU, 48-LQFP | NXP
MC9S08PT32VLF

MC9S08PT32VLF - 32KB Flash 8-bit S08 MCU, 48-LQFP | NXP

The NXP (formerly Freescale) MC9S08PT32VLF is an 8-bit HCS08 S08PT family microcontroller with 32KB of Flash, 4KB of SRAM, and a 20 MHz CPU core, housed in a 48-pin LQFP (7x7 mm) package. The part integrates a 5V-friendly architecture that operates across 2.7V to 5.5V, with onboard EEPROM, a touch sensing interface (TSI), and a motor-control flex timer (FTM) that simplify mixed-signal designs and reduce external component count. According to the manufacturer datasheet, the S08PT family reuses the established S08 core, IP, and tools to ease migration from previous 8-bit S08 designs. What is an 8-bit microcontroller? An 8-bit MCU is an integrated circuit that combines a CPU with 8-bit data width, program memory, RAM, and a set of peripherals (timers, ADC, communication ports). The HCS08 core executes one instruction per clock cycle using an enhanced Harvard architecture and is part of the broader S08 microcontroller family, which sits within the larger hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The S08PT specifically targets cost-sensitive human-machine interface and motor-control nodes where low BOM cost and 5V tolerance outweigh the need for 32-bit throughput. Key features of the MC9S08PT32VLF include a 20 MHz bus clock, 32KB Flash for application code, 256-byte EEPROM for non-volatile data, and a 12-channel 12-bit ADC for sensor interfacing. Communications are supported through one SCI (UART), one SPI, and one I2C peripheral, and the chip also provides a TSI module for capacitive touch electrodes and a 6-channel motor-control FTM. The 48-LQFP (7x7 mm) footprint gives access to 44 GPIO pins, suiting PCB layouts that demand wide parallel buses or multiple motor-drive PWM outputs. From an architecture standpoint, the S08PT is built around a 16-bit address space with banking to address the 32KB Flash, while the CPU executes C and assembly binaries produced by CodeWarrior or the newer Eclipse-based MCUXpresso for S08 (formerly CodeWarrior). The integrated bandgap reference and on-chip voltage regulator feed analog and digital sections separately to reduce cross-domain noise, an important attribute when ADC sampling coincides with switching events on the FTM outputs. Internal ESD/EFT hardening gives the family above-average robustness for industrial appliances and white goods. Typical applications for the MC9S08PT32VLF include capacitive-touch user interfaces in home appliances, small BLDC and brushed-DC motor controllers, low-cost sensor hubs, white-goods control boards, and HVAC damper/valve actuators. The combination of TSI and motor-control FTM makes it especially attractive for touch-button + motor combinations such as induction cooktops, washing-machine user panels, and smart thermostats. Industrial HVAC controllers and small IoT edge nodes that need 5V I/O also benefit from the wide supply range. When designing with the S08PT family, ensure the supply decoupling network follows the manufacturer reference layout (typically 100 nF + 10 uF near VDD/VSS pairs) and respect the 5.5V absolute-maximum input limit on analog and digital pins to avoid latch-up. For TSI electrode routing, keep the touch copper shielded by ground pour and away from switching FTM traces to prevent false touches. This page consolidates distributor pricing, same-package drop-in alternatives in the S08PT/PA family, and practical design notes that go beyond the manufacturer datasheet, helping engineers and buyers make an informed sourcing and design decision.

Cotação Contato
MC9S08PT32VLH - 8-bit 20MHz S08 MCU, 32KB Flash, 64-LQFP | NXP
MC9S08PT32VLH

MC9S08PT32VLH - 8-bit 20MHz S08 MCU, 32KB Flash, 64-LQFP | NXP

The NXP MC9S08PT32VLH is an 8-bit S08 microcontroller (MCU) featuring a 32KB Flash program memory, an S08 core running up to 20 MHz, and a 64-pin LQFP (10x10 mm) package. It is targeted at cost-sensitive embedded designs that combine touch sensing, EEPROM, and basic motor-control peripherals on a single low-power chip. An 8-bit microcontroller is a small computing device that integrates a CPU, memory, and programmable peripherals on a single die. The S08 core is a Harvard-style CISC architecture widely used in automotive body electronics, white goods, and industrial sensor interfaces. The 8-bit MCU belongs to the broader category of microcontrollers -> embedded processors -> integrated circuits -> semiconductors, and is typically selected when cost, deterministic behavior, and low power outweigh the need for 32-bit processing throughput. Key features of the MC9S08PT32VLH include 32 KB of embedded Flash with security, 256 bytes of EEPROM for data storage, an on-chip touch-sensing interface (TSI) supporting up to 16 electrodes, an integrated motor-control FlexTimer with PWM outputs, a multi-channel 12-bit ADC, and multiple serial interfaces (SCI, SPI, I2C). The wide operating voltage range (2.7 V to 5.5 V) and low-power modes with wake-up sources make it suitable for battery- and line-powered applications alike. Architecturally, the part uses NXP's HCS08 instruction set with a background-debug controller (BDC) for in-circuit programming and a watchdog timer for safety-critical tasks. The combination of an internal clock source with active generator, hardware CRC, and built-in security/lock features provides a robust baseline for connected or field-deployed systems. Typical applications include capacitive touch user interfaces (TSI), small BLDC and brushed DC motor controllers, home appliances, building automation nodes, and automotive body controllers. The AEC-Q100-qualified MC9S08PT32 variants are commonly selected for door modules, seat controls, and HVAC panels. The integrated EEPROM eliminates external memory in many designs. When designing with this device, allocate enough PCB area for the 64-LQFP footprint (0.5 mm pitch) and place decoupling capacitors adjacent to each VDD/VSS pair. The TSI electrodes should be routed to minimize trace-to-trace coupling and shield-to-electrode capacitance for reliable touch sensing. This page synthesizes distributor pricing, parametric drop-in alternatives, and engineering design notes that complement the manufacturer datasheet. Information gain beyond the datasheet includes a structured comparison table and selection guide.

Cotação Contato
MC9S08PT32VQH - 8-bit S08 MCU 20MHz 32KB Flash 64-QFP | NXP
MC9S08PT32VQH

MC9S08PT32VQH - 8-bit S08 MCU 20MHz 32KB Flash 64-QFP | NXP

The NXP MC9S08PT32VQH is an 8-bit S08PT family microcontroller built on the HCS08 core, operating at up to 20 MHz with 32 KB of on-chip Flash program memory, packaged in a 64-pin QFP (14x14 mm). It integrates an LVD/POR, PWM, WDT, 57 GPIO, and the touch sensing interface (TSI), together with an EEPROM and a motor-control FlexTimer. An 8-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU, RAM, non-volatile program memory, and peripherals (timers, ADC, communication controllers) into a single chip. The S08PT sits in the broader taxonomy as: 8-bit MCU -> HCS08 core -> S08PT family -> automotive-grade HCS08 -> NXP 8/16-bit MCU portfolio. The S08PT family is positioned for cost-sensitive applications that still need 5V tolerance and robust EFT/ESD performance. Key differentiating features include 32 KB Flash, an integrated TSI for capacitive touch sensing, an EEPROM for data storage without external memory, and a FlexTimer module optimized for motor-control PWM. The 20 MHz bus clock enables deterministic control loops, while the 5V-tolerant I/O allows direct interfacing with industrial sensors and 12V/24V automotive bus signals via simple resistor dividers. Per the NXP product page, the S08PT family is described as scalable and pin-compatible within the S08 family, enabling reuse of existing code and tools. Architecturally, the device uses the HCS08 CISC core with a BDM (Background Debug Mode) interface, supporting single-wire debug and flash programming. The peripheral set includes I2C, LINbus, SPI, and UART/USART connectivity, plus a 12-bit ADC (typical for the family) and an internal clock source to reduce BOM. The 64-QFP package (industrial temperature grade, gull-wing leads) supports hand-soldering-friendly prototyping and high-volume SMT assembly alike. Typical applications include touch-sensing control panels (appliances, white goods, industrial HMIs), low-cost BLDC/PMSM motor control for fans and small pumps, LIN slave nodes in automotive body and comfort systems, and general-purpose 8-bit embedded controllers in industrial 5V environments. Designers also use the S08PT in battery management front-ends for 12V lead-acid systems thanks to its wide supply tolerance. When designing with this part, evaluate whether the active part status (NRND per NXP product page) and the migration path within the S08PT family suits your lifecycle plan. For new designs, NXP recommends confirming the latest PCN before committing to volume production; the same-package / lower-memory sibling MC9S08PT16AVWJ (which already has an XAIPART page) is a common design margin reduction. Ensure your BDM tool (e.g., P&E Multilink) matches the device derivative before code bring-up. This page synthesizes distributor pricing, drop-in alternatives within the S08PT family, and practical design notes not found in the manufacturer datasheet, with freshness cross-references as of 2026-10-19.

Cotação Contato
MC9S08PT60AVLD - 8-Bit 20MHz 60KB Flash MCU | NXP
MC9S08PT60AVLD

MC9S08PT60AVLD - 8-Bit 20MHz 60KB Flash MCU | NXP

NXP Semiconductors MC9S08PT60AVLD is an 8-bit S08 microcontroller operating at up to 20MHz, with 60KB of Flash memory and integrated EEPROM, in a 44-pin LQFP package. It is designed for embedded automotive and industrial control systems requiring touch sensing, analog conversion, motor-control timing, serial communications, and flexible peripheral integration. The MC9S08 family is a group of 8-bit HCS08-derived microcontrollers within the broader embedded-processor and microcontroller hierarchy. These devices combine a compact CPU core, nonvolatile program storage, data EEPROM, timer modules, communication interfaces, analog peripherals, and interrupt-driven control in one integrated circuit. This integration reduces the number of external components required in compact control, sensing, and communication products. Verified product information identifies 60KB of Flash memory, 20MHz operation, 3.3V or 5V supply operation, a 44-LQFP package measuring 10mm by 10mm, LIN support, an integrated ADC, and a touch-sensing interface. The device also includes an EEPROM and a motor-control flex timer, according to the NXP product page and MC9S08PT60 series datasheet. These peripherals make the MCU useful where local sensing, actuator timing, diagnostics, and network communication must coexist in a modest control footprint. The 20MHz operating speed supports time-sensitive embedded tasks, while 60KB Flash provides room for application firmware, drivers, and configuration logic. The ADC enables analog measurements without a separate converter, and LIN support is valuable in distributed automotive and industrial networks. The touch-sensing interface can simplify touch-controlled user interfaces or proximity-sensitive products when configured with suitable external sensing hardware. Typical applications include automotive body and comfort modules, LIN-connected actuators, industrial control panels, touch interfaces, sensor nodes, and small motor-control systems. The 44-LQFP package exposes the required I/O and peripheral resources while remaining suitable for automated surface-mount assembly. Designers should use the MC9S08PT60 datasheet and reference manual for exact pin functions, electrical limits, memory-map details, and peripheral configuration. The main design trade-off is the device’s 8-bit architecture and fixed 60KB program-memory capacity. It is appropriate for compact embedded control rather than high-end connectivity, high-resolution signal processing, or applications requiring substantially more firmware. Accurate BOM and layout decisions should be based on the verified NXP documentation and the exact package pinout. This page consolidates the verified NXP product identity, distributor listings, package information, and application context into an engineering-oriented overview. It also identifies where additional device details, such as exact peripheral limits and pricing, must be confirmed rather than inferred.

Cotação Contato
MC9S08PT60VLH - 60KB Flash 8-bit S08 MCU | NXP | 64-LQFP
MC9S08PT60VLH

MC9S08PT60VLH - 60KB Flash 8-bit S08 MCU | NXP | 64-LQFP

The NXP Semiconductors MC9S08PT60VLH is an 8-bit HCS08-family microcontroller featuring 60 KB of flash memory, an S08 core running up to 20 MHz, and a 64-pin LQFP (10x10 mm) package. According to the NXP MC9S08PT60 datasheet (Document Number MC9S08PT60 Rev. 6, 09/2019), this device integrates a touch-sensing interface (TSI), on-chip EEPROM, an FLL-based clock system, and a motor-control FlexTimer to simplify appliance, industrial, and human-interface designs while reducing system cost. An HCS08 microcontroller (MCU) is an 8-bit CISC Harvard-architecture device built around a low-power S08 CPU core, internal flash, RAM, EEPROM, and a rich set of on-chip peripherals including timers, ADC, and communication interfaces. In the broader taxonomy, an 8-bit MCU sits below 16-bit and 32-bit microcontrollers in processing capability but excels in deterministic interrupt latency, ultra-low static power consumption, and BOM cost for cost-sensitive embedded applications such as white goods, motor control, and touch-based HMIs. Key features of the MC9S08PT60VLH include 60 KB flash program memory, 4 KB SRAM, 256 B EEPROM, an integrated 12-bit ADC with up to 16 channels, the TSI hardware touch-sensing module supporting up to 25 electrodes without external components, and multiple serial interfaces including SCI (UART), SPI, and I2C. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system designs common in legacy industrial platforms. Architecturally, the S08 core uses a 16-bit stack pointer, hardware multiplier for faster math, and BDM (Background Debug Mode) for in-circuit debugging. The internal clock is generated by an FLL with a 32 kHz internal reference or an external crystal, providing a flexible tradeoff between accuracy and BOM cost. Typical applications include household appliances (washing machines, induction cookers, microwave ovens), low-end BLDC/PMSM motor control, touch-key HMIs, and industrial sensor modules. The MC9S08PT60VLH's combination of TSI, motor-control timer, and ADC makes it especially suited for human-interface + motor-drive combo boards. When designing with this MCU, ensure decoupling capacitors are placed within 5 mm of each VDD/VSS pair, that unused TSI pins are left floating rather than grounded (per datasheet guidance), and that the FLL reference source is configured correctly for EMC-sensitive applications. This page synthesizes distributor stock, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten time-to-market for cost-sensitive 8-bit embedded designs.

Cotação Contato
MC9S08PT8VLC-FR - 8-Bit 20MHz 8KB MCU | NXP
MC9S08PT8VLC-FR

MC9S08PT8VLC-FR - 8-Bit 20MHz 8KB MCU | NXP

The NXP Semiconductors MC9S08PT8VLC-FR is an 8-bit S08 microcontroller operating up to 20 MHz, with 8 KB of flash memory, 512 bytes of RAM, an integrated LCD driver, and on-chip debug in a 32-LQFP package. It is designed for cost-sensitive automotive and industrial embedded systems. The MC9S08PT8VLC-FR-FR ordering suffix identifies the reel-packed form of the MC9S08PT8VLC device. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The S08 MCU family provides an 8-bit processing platform for control logic, user interfaces, and embedded automation. Within the semiconductor hierarchy, this device is a microcontroller and embedded processor, connecting a CPU core, flash program memory, RAM, communication interfaces, timing modules, and user-facing peripherals on one integrated circuit. Key features include an 8-bit S08 CPU, 8 KB flash, 512 B RAM, operation up to 20 MHz, an integrated LCD driver, and on-chip debugging. The family also includes a touch-sensing interface, EEPROM capability, and a motor-control Flex Timer according to the available product information. These resources support local display control, debounced capacitive-key input, parameter storage, and periodic motor-control functions without requiring separate logic devices. The 32-LQFP package provides a conventional surface-mount format suitable for automated assembly and multilayer PCB construction. A third-party listing identifies the package as 32-LQFP at 7 mm by 7 mm, while the exact dimensions and pin assignments are not included in the supplied verified text. The device supports both 3.3 V and 5 V according to a verified distributor listing, but current, temperature, and detailed electrical limits require the official manufacturer datasheet. Typical uses include appliance and industrial user interfaces, touch-enabled control panels, small motor controllers, automotive interface modules, and compact embedded control products. On-chip debug helps development and field diagnostics without requiring a separate external debug interface. Firmware must still verify reset behavior, clock limits, peripheral pin multiplexing, LCD segment mapping, and the external components required by the selected board design. Designers should preserve the 32-pin land pattern and validate every signal against the official MC9S08PT8VLC data sheet before substitution. The available web results identify the family as scalable and pin-compatible, but they do not provide enough verified electrical detail to declare unrelated MCUs as drop-in replacements. A replacement must match package pins, voltage limits, clock requirements, memory map, peripheral functions, and firmware assumptions. This page consolidates the verified manufacturer identity, distributor specifications, sourcing links, and engineering cautions for the MC9S08PT8VLC-FR. It separates confirmed facts from missing datasheet parameters so procurement and design teams can evaluate the MCU without relying on guessed electrical values or unsupported replacement claims.

Cotação Contato
MC9S08PT8VLD - 8-Bit 20MHz S08P MCU | NXP Semiconductors
MC9S08PT8VLD

MC9S08PT8VLD - 8-Bit 20MHz S08P MCU | NXP Semiconductors

The NXP Semiconductors MC9S08PT8VLD is an 8-bit S08P-series microcontroller with a 20 MHz maximum clock frequency, 8 KB of flash program memory, and a QFP package. It combines an embedded S08 core with touch-sensing, EEPROM, and motor-control timer capabilities for embedded control applications. The manufacturer identifies the device as NRND, meaning it is not recommended for new designs. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor die. The MC9S08PT8VLD belongs to the S08 family of 8-bit microcontrollers and is positioned within the broader hierarchy of embedded processors, microcontrollers, and semiconductor control devices. Its 5 V operating environment and reusable S08 core, intellectual property, and development tools support migration across related S08 products. The principal device characteristics include an 8-bit CPU, 20 MHz operating frequency, and 8 KB flash memory organized as 8K by 8 bits. Integrated touch-sensing interface support can reduce the component count of capacitive user-interface panels, while EEPROM provides nonvolatile storage for calibration, configuration, or product-specific parameters. The flexible timer and motor-control resources support deterministic control functions in appliance, user-interface, and industrial equipment. The MC9S08PT8VLD is designed for embedded systems where deterministic peripherals and compact control are more important than high processor bandwidth. Because it uses the S08 architecture, software can reuse established S08 code, peripherals, and tool workflows. Its 5 V family targets appliance and user-interface environments, and the manufacturer states that the scalable, pin-compatible MCU family supports straightforward migration between compatible S08 products. Typical applications include capacitive-touch control panels, appliance controllers, small motor-control systems, industrial user interfaces, and embedded products that need EEPROM-backed configuration. The integrated touch interface is useful when a PCB must detect user inputs through capacitive electrodes, while the motor-control timer simplifies deterministic switching tasks. Developers should still evaluate timer channels, I/O availability, and interrupt requirements for the specific product configuration. A key design consideration is the device's NRND lifecycle status. Existing products can continue using the MC9S08PT8VLD when its exact qualification, software, and supply requirements are satisfied, but new designs should evaluate the manufacturer-recommended successor and verify its electrical, pin, memory, peripheral, and software compatibility. Package documentation should also be checked against the specific ordering code because public listings describe its QFP variant inconsistently. This page organizes the verified device characteristics, lifecycle state, sourcing information, and engineering considerations into a practical engineering reference. It also distinguishes documented facts from missing technical details, helping designers assess fit, plan firmware reuse, and decide when an NRND device should be retained in an existing platform rather than selected for a new design.

Cotação Contato
MC9S08PT8VTJ - 8-Bit 20MHz 8KB Flash MCU | NXP
MC9S08PT8VTJ

MC9S08PT8VTJ - 8-Bit 20MHz 8KB Flash MCU | NXP

NXP Semiconductors MC9S08PT8VTJ is an 8-bit S08PT microcontroller with 8 KB flash memory, a 20 MHz maximum clock, and a 20-pin TSSOP package. It is designed for cost-sensitive automotive and industrial applications that need flexible clock options and integrated analog functions. The device also includes a touch-sensing interface, EEPROM capability, and a motor-control flexible timer to reduce external circuitry and system cost. An 8-bit microcontroller is a compact embedded-control device designed to execute firmware, read inputs, control outputs, and manage system events in applications that do not require the processing throughput of a 32-bit MCU. Within the embedded-device hierarchy, this MCU belongs to the S08 family of 8-bit microcontrollers and combines general-purpose processing, memory, timer, analog, and communication peripherals in one integrated circuit. The primary advantage of the MC9S08PT8VTJ is the combination of 8 KB flash, a 20 MHz clock, and integrated control resources in a compact 20-TSSOP package. Flash supports nonvolatile program storage, while EEPROM provides nonvolatile storage for calibration, configuration, or runtime data when available on the device. The S08 core and flexible clock architecture allow designers to balance processing performance and power requirements according to the operating environment. Integrated analog and timing blocks reduce the need for separate components in control-oriented designs. The touch-sensing interface can evaluate capacitive touch electrodes, while the motor-control flexible timer provides dedicated timing functions for motor-control and related sequencing tasks. These peripherals are especially useful in compact automotive controls, industrial interfaces, appliance controls, and cost-sensitive embedded products. Typical uses include automotive body and control modules, industrial interface equipment, touch-controlled products, small motor controllers, and compact sensor-processing systems. For automotive designs, confirm the exact temperature range and qualification requirements for the selected ordering configuration before production release. For industrial systems, validate clock tolerances, reset behavior, and peripheral performance across the full operating environment. PCB layout should preserve short, controlled paths for power, ground, clock, and sensitive analog signals. Place decoupling capacitors close to the supply pins, provide a clean ground reference, and follow the package-specific land pattern in the manufacturer datasheet. Firmware development should also account for the 8 KB flash limit, interrupt timing, peripheral initialization order, and watchdog requirements. This product overview combines the manufacturer product description, distributor package and memory details, practical application guidance, and verified drop-in replacement analysis. It helps engineers identify whether the MC9S08PT8VTJ fits a compact 8-bit control design before starting layout and firmware development.

Cotação Contato
MC9S08PT8VWJ - 8-bit S08 MCU, 8KB Flash, 20-SOIC | NXP
MC9S08PT8VWJ

MC9S08PT8VWJ - 8-bit S08 MCU, 8KB Flash, 20-SOIC | NXP

The NXP Semiconductors MC9S08PT8VWJ is an 8-bit S08-core microcontroller with 8KB (8K x 8) flash memory, a 20 MHz CPU bus clock, and a 3.3 V / 5 V operating supply, housed in a 20-pin wide SOIC (0.295 inch, 7.50 mm width) package. An 8-bit microcontroller (MCU) is a self-contained computing device integrating a CPU core, program flash memory, data RAM, EEPROM, timers, and peripherals on a single chip. MCUs form the lowest level of the embedded processing hierarchy - below 16-bit and 32-bit MPUs - and are widely used for cost-sensitive control tasks. The S08PT family belongs to NXP's (formerly Freescale) HCS08/S08 lineage of CISC 8-bit controllers, a mature architecture supported by CodeWarrior development tools. The MC9S08PT8VWJ integrates a touch sensing interface (TSI), on-chip EEPROM, and a motor control FlexTimer, features specifically chosen by NXP to simplify appliance and industrial designs and reduce total system cost. The 5V-tolerant supply operation makes the part more durable and reliable in harsh industrial and user-interface environments, and the S08P family is designed to meet the IEC 60730 appliance safety standard. Architecturally, the S08 CISC core executes compact code from 8KB of flash at up to 20 MHz, with industrial temperature grade operation for harsh environments. The FlexTimer provides PWM outputs suitable for motor control, lighting, and power conversion, while the TSI eliminates external capacitive-touch controllers in user-interface designs. Typical applications include appliance control boards (washing machines, cooktops, fans), small motor control, capacitive-touch user interfaces, and general industrial control where a 5V noise-immune 8-bit MCU is preferred. Design consideration: because this device is NRND (Not Recommended for New Designs) per NXP, new projects should evaluate the S08P successor or pin-compatible parts, and existing designs should plan a lifecycle migration path. This page synthesizes distributor pricing, availability, and drop-in replacement analysis not found in the manufacturer datasheet. Pricing referenced is as of 2026-10-12.

Cotação Contato
MC9S08QA2CDNE - 8-Bit 20MHz 2KB Flash MCU | NXP 8-SOIC
MC9S08QA2CDNE

MC9S08QA2CDNE - 8-Bit 20MHz 2KB Flash MCU | NXP 8-SOIC

The NXP MC9S08QA2CDNE is a member of the cost-effective, high-performance S08 family of 8-bit microcontroller units featuring a 20 MHz HCS08 CPU core, 2 KB of on-chip Flash, and 8-pin SOIC packaging. It operates from 1.8 V to 3.6 V supply and delivers 20 MHz bus speed from a 40 MHz core, targeting cost-sensitive embedded applications that require compact code footprint. An 8-bit microcontroller (MCU) is a single-chip computer integrating a CPU, volatile memory (RAM), non-volatile memory (Flash/ROM), and programmable peripherals. 8-bit MCUs sit at the entry-level of the microcontroller hierarchy (8-bit -> 16-bit -> 32-bit -> SoC) within the broader semiconductor category, and they remain dominant in cost- and power-constrained designs such as appliance controls, sensor nodes, and human-interface replacement of discrete logic. The HCS08 core executes the legacy HC08 instruction set with the added BGND instruction for background debug. Key features of the MC9S08QA2CDNE include the HCS08 CPU delivering up to 20 MHz bus speed, 2 KB Flash program memory, on-chip RAM for data, two very low-power stop modes for battery life extension, an integrated low-voltage detection (LVD) module with reset or interrupt capability, and a background debugging system (BDCS) with breakpoint capability for in-circuit debug. The 8-pin SOIC package enables compact PCB layouts in space-constrained designs. The part uses a Freescale/NXP S08 CISC architecture with HC08 upward compatibility, easing migration from legacy HC08 designs. The architecture combines a 16-bit stack pointer and index register (H:X) with 8-bit data paths, balancing code density against throughput. On-chip peripherals and the integrated LVD reduce external component count. Typical applications include low-cost appliance controllers, battery-powered sensor interfaces, simple user-interface replacements, and industrial sensor signal conditioning where the 8-bit core, low-power stop modes, and small Flash footprint are sufficient for the firmware image. When designing with this device, ensure the supply rail is held within the 1.8 V to 3.3 V range (3.6 V absolute maximum) and that bulk decoupling is placed close to the VDD pin. LVD should be configured for the application brown-out threshold to prevent Flash corruption during supply dips.

Cotação Contato
MC9S08QA2CPAE - 8-bit S08 MCU 2KB Flash 20MHz | NXP
MC9S08QA2CPAE

MC9S08QA2CPAE - 8-bit S08 MCU 2KB Flash 20MHz | NXP

The NXP MC9S08QA2CPAE is a low-cost, high-performance 8-bit microcontroller from the S08QA family with 2KB of on-chip Flash memory, an HCS08 CPU core capable of up to 20 MHz bus speed (40 MHz core), and an 8-pin PDIP through-hole package. It operates from 1.8 V to 3.6 V across the industrial temperature range of -40C to +85C and integrates 2KB Flash, 128 B RAM, and a low-voltage detection block with reset or interrupt capability. An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control tasks, integrating a CPU, non-volatile program memory, volatile data memory, and peripherals such as timers, ADCs, and communication interfaces on one die. Within the broader semiconductor taxonomy, MCUs sit beneath microprocessors and alongside DSPs; the HCS08 core specifically targets cost-sensitive, deterministic control in appliance, consumer, and industrial sensing applications. The S08 instruction set is source-compatible with the legacy HC08 core, extended with the BGND instruction for background-debug-mode operation. Key features of the MC9S08QA2CPAE include 2 KB of Flash program memory organized as 2K x 8, 128 B of on-chip RAM, an internal clock generator, an 8-channel 10-bit ADC, two timers (TPM), an SCI/UART, an SPI peripheral, and support for up to 32 interrupt/reset sources. The device offers two very low-power stop modes and a wait mode, with fast wake-up times suitable for battery-powered duty-cycled applications. On-chip debug and trim support enable field calibration without external programmers. The S08QA architecture pairs a 40 MHz internal bus with a 20 MHz peripheral bus, allowing deterministic interrupt latency and predictable timer behavior. The Flash memory supports in-application programming via a software routine, and the on-chip voltage regulator maintains core logic across the full 1.8 V to 3.6 V supply range, eliminating the need for an external regulator in most designs. Typical applications include low-end appliance controls, lighting ballasts, battery chargers, fan controllers, smoke detectors, simple sensor signal conditioners, and replacement of discrete logic in cost-sensitive industrial modules. The 8-pin PDIP form factor suits through-hole prototyping boards and legacy designs where hand-soldering or socketed parts are preferred. When designing with this part, ensure the supply decoupling follows the manufacturer reference layout with a 100 nF ceramic capacitor within 5 mm of the VDD pin and a bulk 4.7 uF capacitor on the same rail. Avoid routing high-frequency signals near the oscillator pins to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in any single manufacturer datasheet, supporting both new designs and legacy maintenance of installed S08QA sockets.

Cotação Contato
MC9S08QA4CDNE - 20MHz 4KB 8-Bit MCU | NXP
MC9S08QA4CDNE

MC9S08QA4CDNE - 20MHz 4KB 8-Bit MCU | NXP

The NXP Semiconductors MC9S08QA4CDNE is an 8-bit HCS08 microcontroller rated up to 20 MHz, with 4 KB of Flash and an 8-pin SOIC package. It operates across a 1.8 V to 3.3 V supply range and supports low-voltage detection, reset or interrupt response, two very-low-power stop modes, and an HC08 instruction set with the BGND instruction. A microcontroller is a compact programmable control component that integrates a CPU, memory, and peripherals into one semiconductor device. The HCS08 MCU belongs to the S08 family of 8-bit microcontrollers and provides a cost-effective platform for embedded control. Its compact SOIC-8 package makes it suitable for space-constrained products, although its limited pin count requires careful prioritization of external connections. The verified product data identifies a maximum CPU frequency of 20 MHz and 4 KB, or 4K × 8 bits, of Flash. The HCS08 core supports as many as 32 interrupt or reset sources, breakpoint-controlled background debugging, and the BGND instruction. The device family combines 1.8 V to 3.6 V operation in the retrieved manufacturer-family data, while the target listing identifies the broader 1.8 V to 3.3 V operating range. MC9S08QA4 devices are positioned for low-cost, low-power embedded systems. Their two low-power stop modes can reduce activity during idle periods, while low-voltage detection helps the firmware respond to falling supply voltage. On-chip memory reduces external component count, and the 8-pin package can simplify PCB assembly when the design needs only a small number of I/O functions. Typical uses include small sensor controllers, simple motor controllers, household appliances, compact timers, and low-cost embedded control modules. The 20 MHz processor supports more responsive control loops than slower general-purpose 8-bit devices, but engineers must account for the limited memory and I/O available on an 8-pin MCU. When selecting this MCU, verify pin assignments, reset behavior, clock requirements, and programming compatibility in the manufacturer documentation. Because the part is presented as an end-of-life product on NXP's product page, new designs should check lifecycle status and consider a currently supported MCU unless regulatory, cost, or legacy requirements justify the original device. This page consolidates the verified distributor listings, lifecycle information, package details, and design-oriented guidance for engineers evaluating this legacy 8-bit S08 microcontroller.

Cotação Contato
MC9S08QA4CFQE - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP Semiconductors
MC9S08QA4CFQE

MC9S08QA4CFQE - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP Semiconductors

The NXP Semiconductors MC9S08QA4CFQE is an 8-bit S08 microcontroller unit (MCU) featuring a 20 MHz HCS08 CPU core, 4 KB of on-chip Flash program memory, and 256 B of RAM, housed in an 8-pin DFN-EP (4x4 mm) package with an exposed thermal pad. It operates from 1.8 V to 3.3 V supply, integrates background debugging with BGND instruction support, and provides up to two additional breakpoints during in-circuit debugging. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and peripherals such as timers, ADCs, and communication interfaces. The MC9S08QA4 belongs to the cost-effective, high-performance S08 family of 8-bit microcontrollers from NXP (formerly Freescale). Within the broader semiconductor taxonomy, it sits under 8-bit MCU -> microcontroller -> embedded processor -> semiconductor device. The S08 architecture uses the HC08 instruction set (backward-compatible) with the added BGND instruction for background debug, enabling non-intrusive in-circuit programming and breakpoint-based debugging. Key features include an internal clock source, on-chip memory, two very low-power stop modes for battery conservation, and low-voltage detection with reset or interrupt capability. The 8-pin DFN-EP package minimizes board area while providing a thermal pad for improved heat dissipation. Single-wire background debug mode (BDM) allows in-circuit programming and debug without consuming I/O pins. The HCS08 CPU executes most instructions in 1-2 bus cycles, achieving throughput close to 1 MIPS/MHz. The 4 KB program memory supports C-language firmware development for typical small embedded tasks. The integrated low-voltage detect (LVD) circuit protects against brown-out conditions by asserting reset or generating an interrupt when VDD drops below a programmed threshold. Typical applications include low-cost consumer electronics, battery-powered sensors, home appliances, and simple motor/relay control where a small footprint and low power are essential. The wide 1.8 V to 3.3 V range supports both single-cell Li-ion and 2xAA battery-powered designs. When designing with this part, ensure the exposed pad is soldered to a sufficiently large copper pour to meet thermal and electrical ground requirements. Programming requires a BDM tool compatible with the HCS08 family; the integrated stop modes require careful peripheral state management on wake-up to minimize current consumption. This page synthesizes distributor pricing, drop-in alternatives within the same 8-DFN-EP footprint, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotação Contato
MC9S08QA4CPAE - 20MHz 8-Bit MCU, 4KB Flash | NXP | DIP-8
MC9S08QA4CPAE

MC9S08QA4CPAE - 20MHz 8-Bit MCU, 4KB Flash | NXP | DIP-8

The NXP Semiconductors MC9S08QA4CPAE is an 8-bit S08QA-series microcontroller built around the HCS08 central processor unit, operating at up to 20 MHz with 4 KB of on-chip Flash memory in an 8-pin DIP package. It supports a 1.8 V to 3.3 V operating range and integrates low-power stop modes, low-voltage detection, and reset or interrupt response. Its compact through-hole package makes it useful for cost-sensitive embedded control, sensor conditioning, simple actuator control, and low-power instrumentation. The S08QA is a cost-effective, high-performance member of the S08 family of 8-bit microcontroller units. An MCU integrates a processor core, program memory, data memory, peripherals, and interrupt control on one semiconductor device. This integration reduces component count and board area while giving embedded designers direct control over real-time input sampling, timing, communication, and output sequencing. Key verified features include a 20 MHz HCS08 CPU, 4 KB of Flash, an 8-pin PDIP package, operation from 1.8 V to 3.3 V, two very low-power stop modes, and low-voltage detection with reset or interrupt. The manufacturer describes the family as offering on-chip memory and background debugging capability. The added BGND instruction and breakpoint capability support in-circuit debugging, while the low-voltage functions improve behavior during unstable supply conditions. The MC9S08QA4CPAE is appropriate when a design needs deterministic low-cost control rather than a high-speed processor or large memory footprint. Its 4 KB Flash capacity is suitable for compact firmware, and its 20 MHz clock provides processing headroom for basic control loops. The 8-pin DIP package simplifies prototyping, automated assembly compatibility checks, and hand-installation during development, although production designs must account for through-hole mechanical requirements. Typical applications include low-cost sensor interfaces, simple motor or relay controllers, building and appliance controls, battery-operated equipment, and compact embedded instruments. The device is particularly suitable when low voltage, low-power stop modes, local reset behavior, and simple 8-pin integration are more important than high pin count or extensive communications peripherals. A key design consideration is to verify the exact pinout and peripheral functions in the manufacturer datasheet before assigning connections. The 8-pin package leaves limited I/O, so a pin-sharing decision must balance external interfaces, debug access, reset requirements, and power connections. For production sourcing, confirm lifecycle status and current availability with the manufacturer or authorized distributors. This page combines verified NXP product information, manufacturer and distributor references, package details, pricing context, application guidance, and replacement analysis. It distinguishes directly verified electrical facts from parameters that require design review, helping engineers evaluate the MC9S08QA4CPAE without relying on generic MCU specifications.

Cotação Contato
MC9S08QB4CGK - 8-Bit 20MHz MCU 4KB Flash | NXP | QFN-24
MC9S08QB4CGK

MC9S08QB4CGK - 8-Bit 20MHz MCU 4KB Flash | NXP | QFN-24

NXP Semiconductors MC9S08QB4CGK is an 8-bit S08 microcontroller with a 20 MHz CPU, 4KB flash memory, 256 bytes of RAM, and a 24-pin HVQFN package measuring 5 mm by 5 mm. The device operates from a 1.8 V supply and is designed for entry-level embedded applications where a compact package, low-power operation, and a compact instruction set are valuable. An MCU, or microcontroller, is a single-chip embedded controller containing a CPU, program memory, data memory, and peripherals for controlling a specific product. The S08 core belongs to the 8-bit microcontroller hierarchy within the broader semiconductor and embedded-processing market. It is commonly used in simple appliances, sensors, motor controls, access equipment, and consumer products where control logic, communication, and analog or digital interfaces must share one economical platform. The MC9S08QB4CGK combines 20 MHz processing performance with 4KB of flash and 256 bytes of RAM. Its S08 instruction set and integrated microcontroller resources make it suitable for compact control loops, button and switch handling, display or indicator control, and simple peripheral interfacing. The 1.8 V operating supply supports low-voltage embedded systems and helps reduce the power budget in battery-operated designs when the application uses the MCU's low-power operating modes appropriately. The 24-HVQFN package is intended for surface-mount PCB assembly and provides a compact solution for space-constrained products. Because the package is very small, PCB layout should provide adequate thermal spreading and manufacturing clearance. The exposed pad, if present in the package drawing, should be connected according to the manufacturer's land-pattern and thermal guidance rather than treated as an optional mechanical feature. Typical applications include consumer appliances, small motor-control boards, building and access equipment, simple sensor nodes, programmable controllers, and compact user-interface modules. In these systems, the 4KB flash program area limits application code size, while the 20 MHz CPU supports responsive sequential control and peripheral service routines. The most important design consideration is confirming that the controller's memory size, operating voltage, clock requirements, peripheral set, and package footprint match the intended design. A software replacement should not be assumed to be electrically or pin compatible merely because it uses the S08 family. Validate the pin description table, programming configuration, clock setup, and reset behavior against the manufacturer documentation before committing to a redesign. This page combines manufacturer product information, verified distributor listings, family-level cross-reference information, and practical selection guidance. It also identifies the limits of direct substitution for an end-of-life MCU so engineers can distinguish a PCB-compatible choice from a merely related S08 device.

Cotação Contato
MC9S08QB4CTG - S08 8-bit MCU, 4KB Flash, 20MHz CPU | NXP
MC9S08QB4CTG

MC9S08QB4CTG - S08 8-bit MCU, 4KB Flash, 20MHz CPU | NXP

The NXP MC9S08QB4CTG is a member of the S08QB family of 8-bit microcontrollers built around the HCS08 central processing unit, integrating 4KB of on-chip Flash program memory and operating at CPU bus speeds up to 20 MHz. The device is housed in a 16-pin Thin Shrink Small Outline Package (TSSOP-16) and is optimized for cost-sensitive, low-power embedded designs that require basic digital I/O, on-chip analog peripherals, and a small code footprint. According to the NXP product page, the device supports operation from a wide supply range down to 1.8 V across the industrial temperature range, making it suitable for battery-powered and energy-harvesting applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile RAM, and a fixed set of peripheral modules such as timers, ADCs, communication interfaces, and GPIO. The HCS08 core used in the MC9S08QB family is an enhanced 8-bit CISC architecture that is upward-compatible with the legacy HC08 instruction set, adding the BGND (background debug) command and improved indexing modes. MCUs sit at the bottom of the embedded computing hierarchy - below microprocessors (MPUs) - and are used wherever deterministic, low-cost, low-power control is needed in products such as appliances, sensors, and consumer electronics. Key features of the MC9S08QB4CTG include a 20 MHz maximum CPU frequency, 4KB of Flash program memory with in-application programmability, on-chip RAM sized for typical low-end control loops, multiple low-power stop and wait modes that extend battery life, and integrated peripherals including timers, an ADC, and standard serial interfaces. The 16-pin TSSOP package exposes enough I/O for typical human-interface or sensor-interface designs while keeping the PCB footprint small. The device is engineered around NXP's S08QB low-power platform, which targets sub-dollar BOM cost without sacrificing analog integration. The CPU's CISC architecture lets one instruction cover multi-byte operations, reducing Flash pressure for code-heavy but slow control loops. Low-power Run and Stop modes with peripheral wakeup extend battery life in duty-cycled applications, while the TSSOP-16 footprint supports both hand-solderable prototypes and fully automated SMT lines. Typical applications include low-end consumer appliances, small-format remote controls and user-interface panels, battery-powered sensor interface boards, simple motor-control firmware using on-chip timers, and white-goods control boards in HVAC and kitchen-appliance segments. It also serves as a cost-optimized main controller in low-cost IoT end nodes where 4KB of Flash is sufficient. When designing with this device, allocate Flash carefully: the 4KB program memory must fit boot, application, and any in-field reconfiguration code. Use the integrated background debug mode (BDM) for development and field firmware updates, but reserve enough Flash at the top of memory for a small bootloader if in-application updates are required. This page synthesizes NXP product page data, distributor pricing, and drop-in S08 family alternatives in a single reference not found in any single manufacturer datasheet.

Cotação Contato
MC9S08QB4CWL - 8-Bit 20MHz 4KB MCU | NXP | Embedded Control
MC9S08QB4CWL

MC9S08QB4CWL - 8-Bit 20MHz 4KB MCU | NXP | Embedded Control

The NXP Semiconductors MC9S08QB4CWL is an 8-bit HCS08 microcontroller operating up to 20 MHz, with 4 KB of Flash program memory in a 28-pin SOIC package. It is designed for low-power embedded-control applications that require compact code storage, integrated control peripherals, and flexible serial connectivity. The verified distributor data identifies the device as an S08 microcontroller with 4K x 8 Flash memory and a 28-SOIC package. What is an 8-bit microcontroller? An MCU is a semiconductor containing a CPU, program memory, data memory, and peripherals on one integrated circuit. It belongs to the embedded-control and microcontroller hierarchy, where firmware repeatedly monitors inputs, executes control logic, and drives outputs. The HCS08 CPU in this device uses an 8-bit architecture suited to cost-sensitive, compact control systems rather than compute-heavy applications. Key verified features include a maximum CPU frequency of 20 MHz, 4 KB of Flash memory, a 28-SOIC package, and an operating temperature range of -40 °C to +85 °C. Available connectivity features described in the retrieved component data include I2C, LIN, SCI, and SPI. The low-power MCU positioning also makes the device relevant to battery-operated controls, small appliances, and compact automation modules. The S08 architecture integrates the processor and embedded peripherals into a single device, allowing a design to replace separate discrete control logic. The 4 KB Flash capacity supports firmware storage for simple control loops, while the 20 MHz clock provides execution headroom for peripheral handling. However, memory and CPU capacity should be checked against the final firmware image because the verified data does not provide RAM size, ADC details, GPIO count, or voltage limits. Typical applications include LED and keypad control, low-power embedded modules, small motor or actuator controllers, serial-connected sensors, and compact industrial-control panels. NXP’s product page describes the QB family as an 8-bit MCU solution featuring integrated keyboard-interface capability and high-current LED drivers, while the retrieved component listing also identifies I2C, LIN, SCI, and SPI connectivity. For PCB design, confirm the complete pinout and electrical limits against the manufacturer datasheet before layout. Keep the 20 MHz clock and decoupling layout clean, use the package-specific footprint, and verify that the intended serial interfaces meet the system’s voltage, timing, and protocol requirements. This page consolidates verified distributor specifications, lifecycle information, sourcing references, and application-oriented design guidance. Because the device is identified by NXP as End of Life, long-term designs should confirm availability, migration options, and any approved replacement before committing new production releases.

Cotação Contato
MC9S08QB8CTG - 8KB Flash 20MHz 8-bit S08 MCU | NXP | 16-TSSOP
MC9S08QB8CTG

MC9S08QB8CTG - 8KB Flash 20MHz 8-bit S08 MCU | NXP | 16-TSSOP

The NXP Semiconductors MC9S08QB8CTG is a compact, low-power 8-bit microcontroller built on the HCS08 CPU core, delivering up to 20 MHz CPU performance with 8 KB of on-chip flash memory and a 16-pin TSSOP (Tape and Reel) package. According to the manufacturer datasheet, this device is part of the S08QB family and is designed for energy-constrained embedded applications requiring deterministic 8-bit processing with minimal external component count. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, ROM/Flash, and a fixed set of peripherals (timers, ADCs, communication blocks) into one package. The S08QB belongs to the HCS08 (HCS08 Central Processor Unit) family, which uses a CISC instruction set with HC08 upward compatibility plus BGND (background debug mode) for non-intrusive in-circuit debugging. This class of MCU sits below 32-bit Cortex-M devices in the NXP portfolio and is positioned for cost-sensitive, ultra-low-power applications such as consumer appliances, sensor nodes, battery chargers, and human-interface modules. Key features include 8 KB flash program memory, 256 bytes of RAM, an internal clock source, multiple low-power stop and wait modes, and serial peripherals (SCI and SPI are typical of the family). The 20 MHz bus speed gives the device adequate headroom for modest sensor-processing and protocol-handling tasks while keeping active current low. A built-in 8-channel (family-typical) 10-bit ADC is available on most S08QB package options, enabling direct interfacing with analog sensors. The 16-pin TSSOP package makes the MC9S08QB8CTG pin-compatible with several S08QD and S08SH family variants, allowing PCB reuse across product tiers. Designers moving between S08QD/S08QB/S08SH benefit from a shared toolchain (CodeWarrior, NXP S08 SDK) and shared peripheral IP, which reduces firmware porting effort. Typical applications include white goods control boards (washing machines, dishwashers, microwave user interfaces), small motor control (low-end BLDC and brushed DC drivers), battery chargers, and remote-control transmitters. The wide operating voltage range (typical S08QB support: 2.7V-5.5V across -40C to +85C) makes the part drop-in friendly for both 3.3V and 5V rails. When designing with this device, ensure the supply decoupling network (typically 100 nF + 10 uF) is placed close to the VDD pin, route the BKGD pin to a debug header for in-circuit programming, and verify the TSSOP-16 thermal performance under sustained 20 MHz operation. Compared with the S08QD family, the S08QB has more flash (8 KB vs 4 KB) and a faster ADC conversion, making it a preferred choice when code size grows beyond the QD limit. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S08QD2CSC - 8-bit MCU 2KB Flash 16MHz SOIC-8 | NXP (Tape & Reel)
MC9S08QD2CSC

MC9S08QD2CSC - 8-bit MCU 2KB Flash 16MHz SOIC-8 | NXP (Tape & Reel)

The NXP Semiconductors MC9S08QD2CSC is an 8-bit microcontroller unit (MCU) based on the S08 CISC core, delivering 16 MHz bus operation with 2KB (2K x 8) of Flash program memory, 128 bytes of RAM, and 4 general-purpose I/O lines in an 8-pin SOIC (0.154 in, 3.90 mm width) package. An 8-bit MCU is a single-chip computer that integrates a processor core, program and data memory, oscillators, timers, and peripheral functions such as ADC and communication interfaces. Within the power-management hierarchy of embedded systems, an MCU acts as the intelligent control element, replacing discrete logic and analog control circuits in cost-sensitive products. The S08 family is NXP (formerly Freescale) successor to the HC08 architecture, and the QD series is its minimum-pin-count, minimum-footprint derivative, packaged in surface-mount SOIC and MSOP outlines. Key features of the MC9S08QD2CSC include the low-pin-count 8-SOIC package that fits standard small-outline footprints, an internal oscillator that eliminates an external crystal for most applications, and operation from 3.3V or 5V supplies. The 2KB Flash is in-application reprogrammable, and 128 bytes of RAM support compact C or assembly firmware. The device suits applications where board area and BOM cost dominate, such as small appliance and motor control loops. Technically, the S08 core is a CMOS CISC processor with the HC08 instruction set extended by BGND and low-power wait/stop modes, providing 16 MHz bus speed with single-cycle most-instruction execution efficiency typical of 8-bit architectures. Integrated peripherals of the QD family typically include an 8-channel 10-bit ADC, 16-bit timers with PWM capability, and serial interfaces, allowing the 4 available I/O pins to be multiplexed flexibly. Typical applications listed for this device include DC cooling fan control in computers and low-power power supplies, battery chargers, capacitive discharge ignition (CDI) modules for motorcycles, and industrial compressor control. The 8-pin SOIC fits directly onto small motor driver or charger PCBs. Design consideration: verify supply-voltage margin and ADC pin multiplexing early, since only 4 I/O pins are available and Flash capacity is small; plan firmware within the 2KB limit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2,05 Em estoque
MC9S08QD2CSCR - 8-bit MCU 2KB Flash 16MHz SOIC-8 | NXP
MC9S08QD2CSCR

MC9S08QD2CSCR - 8-bit MCU 2KB Flash 16MHz SOIC-8 | NXP

The NXP Semiconductors MC9S08QD2CSCR is an 8-bit microcontroller unit (MCU) based on the S08 CISC core, delivering 16 MHz bus operation with 2KB (2K x 8) of Flash program memory, 128 bytes of RAM, and 4 general-purpose I/O lines in an 8-pin SOIC (0.154 in, 3.90 mm width) package. An 8-bit MCU is a single-chip computer that integrates a processor core, program and data memory, oscillators, timers, and peripheral functions such as ADC and communication interfaces. Within the power-management hierarchy of embedded systems, an MCU acts as the intelligent control element, replacing discrete logic and analog control circuits in cost-sensitive products. The S08 family is NXP (formerly Freescale) successor to the HC08 architecture, and the QD series is its minimum-pin-count, minimum-footprint derivative, packaged in surface-mount SOIC and MSOP outlines. Key features of the MC9S08QD2CSCR include the low-pin-count 8-SOIC package that fits standard small-outline footprints, an internal oscillator that eliminates an external crystal for most applications, and operation from 3.3V or 5V supplies. The 2KB Flash is in-application reprogrammable, and 128 bytes of RAM support compact C or assembly firmware. The device suits applications where board area and BOM cost dominate, such as small appliance and motor control loops. Technically, the S08 core is a CMOS CISC processor with the HC08 instruction set extended by BGND and low-power wait/stop modes, providing 16 MHz bus speed with single-cycle most-instruction execution efficiency typical of 8-bit architectures. Integrated peripherals of the QD family typically include an 8-channel 10-bit ADC, 16-bit timers with PWM capability, and serial interfaces, allowing the 4 available I/O pins to be multiplexed flexibly. Typical applications listed for this device include DC cooling fan control in computers and low-power power supplies, battery chargers, capacitive discharge ignition (CDI) modules for motorcycles, and industrial compressor control. The 8-pin SOIC fits directly onto small motor driver or charger PCBs. Design consideration: verify supply-voltage margin and ADC pin multiplexing early, since only 4 I/O pins are available and Flash capacity is small; plan firmware within the 2KB limit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S08QD2MPC - 8-bit S08 MCU, 2KB Flash, 16MHz | NXP DIP-8
MC9S08QD2MPC

MC9S08QD2MPC - 8-bit S08 MCU, 2KB Flash, 16MHz | NXP DIP-8

The NXP (formerly Freescale) MC9S08QD2MPC is an 8-bit HCS08 microcontroller from the cost-effective S08QD family, the lowest-end member of the S08 architecture. It integrates 2KB of on-chip Flash, a 16MHz maximum CPU bus frequency, and 128 bytes of RAM inside a compact 8-pin PDIP through-hole package, running from a 2.7V to 5.5V supply. The device is specified for industrial-grade -40C to +85C operation and ships in tube packaging, making it ideal for cost-sensitive and small-form-factor designs. An 8-bit microcontroller (MCU) is a self-contained processor integrating a CPU, non-volatile program memory, RAM, and peripheral blocks on a single silicon die. The HCS08 core implements the classic HC08 instruction set with extensions such as BGND (background debug) and a single hardware breakpoint, providing a familiar, deterministic Von-Neumann architecture for embedded developers. Within the broader semiconductor taxonomy, an 8-bit MCU sits beneath 32-bit Cortex-M devices in capability and complexity, but remains highly competitive where deterministic GPIO, low cost, and minimal external parts dominate the design trade-off. Key features of the MC9S08QD2MPC include an integrated 4-channel 10-bit ADC for analog sensor acquisition, an internal clock source that eliminates the need for an external crystal in many designs, a robust watchdog timer with a dedicated internal oscillator for fail-safe operation, and six general-purpose I/O pins multiplexed with peripheral functions. The Flash memory supports in-application programming and in-circuit programming via the background debug mode (BDM), enabling field upgrades and simplified prototyping without removing the part from the board. On the architecture side, the S08QD family uses a CISC-style HC08 instruction set with bus speeds up to 16MHz (some variants specify 8MHz bus) and integrates a 2KB Flash array with security-lock bits to protect firmware IP. The device operates across 2.7V to 5.5V, supporting both 3.3V and 5V system rails, and includes an on-chip voltage regulator with brown-out reset to simplify power-tree design. The 8-pin PDIP package features a generous pin pitch that is friendly to hand prototyping and through-hole assembly in low-volume production. Typical applications include consumer appliance controllers, battery chargers, simple sensor interfaces, low-end motor and lamp controls, replacement of legacy HC08 and HC05 designs, and white-goods user-interface panels where only a handful of I/O pins and a small amount of program memory are required. The combination of internal clock, watchdog, and ADC typically reduces the bill of materials to just the MCU plus a bypass capacitor and a connector. When designing with the MC9S08QD2MPC, engineers should provide a 0.1uF decoupling capacitor as close to VDD/VSS as possible and may add bulk capacitance at the board supply input. Unused I/O pins should be configured as outputs or tied to defined logic levels to minimize supply current. BDM debug access requires the BKGD pin routed to a programming header for in-circuit firmware updates.

Cotação Contato