Microcontroladores

Produtos (20.000+)

MC9S08SL8CTJ - 8-Bit 40MHz S08 MCU, 8KB Flash | NXP
MC9S08SL8CTJ

MC9S08SL8CTJ - 8-Bit 40MHz S08 MCU, 8KB Flash | NXP

NXP Semiconductors MC9S08SL8CTJ is an 8-bit S08SL microcontroller with an S08 CPU core, 8KB flash memory, 512B RAM, and a 40MHz maximum clock speed in a 20-TSSOP package. The device targets cost-sensitive consumer and industrial equipment and includes an embedded slave LIN interface controller, EEPROM, and an integrated keyboard interface. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The S08 family belongs to the HCS08 architecture and combines the HC08 instruction set with an added BGND instruction. Within the product hierarchy, MC9S08SL8CTJ is an 8-bit embedded MCU, a cost-focused member of the S08SL family designed for compact control and communication products. The principal features include 8KB of flash, 512B of RAM, a 40MHz HCS08 CPU, 16 I/O ports, and a 16-channel, 10-bit ADC. It also provides support for up to 32 interrupt and reset sources. An embedded slave LIN controller is especially useful in cost-sensitive automotive and industrial networks, while EEPROM supports parameter storage without using scarce flash program space. The operating voltage range is 2.7V to 5.5V, allowing connection to common 3.3V and 5V systems. The industrial temperature range is -40°C to +85°C. Its 20-TSSOP package has a stated width of 4.40mm, making the device suitable for compact PCB layouts where a larger plastic package would be undesirable. Typical applications include LIN-connected slave nodes, small motor-control modules, keypad-based user interfaces, appliance controls, sensor-conditioning equipment, and cost-sensitive consumer products. The integrated keyboard interface is particularly useful in products with a small number of switches, while the ADC supports direct connection of analog sensors. When laying out a design, begin with the manufacturer's pin-description and recommended application schematics. Place decoupling capacitors close to the supply pins, route the analog input traces away from switching nodes, and confirm that the external programming and debug arrangement matches the chosen S08 development system. Although the device is listed as NRND by NXP, it remains relevant for maintenance and continuation of existing embedded designs. This page combines the manufacturer product information with an engineering-focused review of memory, analog conversion, connectivity, package constraints, lifecycle considerations, and practical design decisions. It also identifies the limits of drop-in replacement evidence so engineers can distinguish confirmed compatibility from parts that merely use a similar package or belong to a related MCU family.

Cotação Contato
MC9S08SL8CTL - 8KB Flash 40MHz S08 MCU w/ LIN | NXP
MC9S08SL8CTL

MC9S08SL8CTL - 8KB Flash 40MHz S08 MCU w/ LIN | NXP

The NXP MC9S08SL8CTL is an 8-bit S08SL microcontroller with 8KB Flash, 40MHz HCS08 CPU core, embedded slave LIN interface controller (SLIC), and an integrated LIN physical layer in a 28-pin TSSOP package. It targets cost-sensitive automotive body and LIN slave node applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADC, and communication interfaces. The MC9S08SL8CTL belongs to the S08 family of 8-bit microcontrollers, which traces to the original HC08 instruction set with extensions like BGND for background debug. Within NXP's portfolio, it sits in the S08SL sub-line that adds a slave LIN interface controller (SLIC) and on-chip LIN transceiver, simplifying LIN slave node designs. Key features include 8KB on-chip Flash, 512 bytes EEPROM, 256-byte TFL (Three-Flash-Lock) security area, 16-bit timer/PWM module (TPM), a 16-channel 10-bit ADC with 2.5 µs conversion, and an inter-integrated circuit (IIC) serial interface. The supply voltage range is 2.7V to 5.5V and the device supports up to 32 interrupt sources. The integrated LIN 2.1 / SAE J2602 physical layer plus SLIC removes the need for an external LIN transceiver in most LIN slave nodes. The HCS08 core executes most instructions in 1-2 bus cycles at 40MHz internal bus rate, achieving roughly 1 MIPS/MHz effective throughput. Internal architecture is Freescale (now NXP) proprietary 0.25 µm CMOS, paired with an on-chip voltage regulator that allows single-supply 2.7V-5.5V operation. Background debug mode (BDM) and on-chip in-circuit emulation simplify firmware development and field upgrades. Typical applications include automotive body control modules (door modules, seat controllers, mirror switch packs), LIN slave nodes for HVAC blower controls and ambient lighting, and industrial sensor peripherals with LIN connectivity. It is also used in low-cost consumer appliances that benefit from LIN or IIC host communication. When designing, note that 28-pin TSSOP thermal limits and 5V-tolerant I/O are appropriate for body electronics rather than under-hood conditions. Decouple VDD/VSS with a 100 nF ceramic placed within 5 mm of the IC, and follow NXP's AN3494 LIN physical-layer layout guidelines for EMC robustness. This page synthesizes distributor pricing, verified drop-in alternatives, and application-specific design guidance that complement the manufacturer datasheet.

Cotação Contato
MC9S08SL8VTJ - 8-Bit 40MHz MCU with 8KB Flash | NXP
MC9S08SL8VTJ

MC9S08SL8VTJ - 8-Bit 40MHz MCU with 8KB Flash | NXP

The NXP Semiconductors MC9S08SL8VTJ is an 8-bit S08 microcontroller with a 40 MHz maximum clock frequency, 8 KB of flash program memory, and a 20-pin TSSOP package. Designed for economical battery-operated equipment, the device combines an economical 8-bit CPU with an integrated LCD driver, low-power operation, and mixed-signal peripherals suited to compact control systems. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one package. The S08 belongs to the 8-bit microcontroller hierarchy, where instruction efficiency, deterministic control, and low system cost are more important than the high throughput associated with 32-bit application processors. Within that hierarchy, the MC9S08SL family targets small control products that need embedded flash, analog measurement, serial communications, display support, and low standby power. Key features include 8 KB of flash memory, a 40 MHz rated clock, a 10-bit ADC with up to 16 channels, 16 I/O ports, and an operating supply range of 2.7 V to 5.5 V. The integrated LCD driver can reduce the component count in handheld or meter-style products, while low-power characteristics suit battery-powered appliances. These features make the device appropriate for controls, sensor interfaces, small displays, and serial-connected embedded products. The S08 core uses the HC08 instruction set with the added BGND instruction and supports up to 32 interrupt or reset sources. The MCU also includes an embedded slave LIN interface controller and EEPROM support according to the S08SL family description. A 10-bit ADC balances measurement resolution with the processing and power requirements of an 8-bit control platform. The result is a compact mixed-signal controller intended for cost-sensitive designs rather than intensive computation. Typical applications include battery-operated instruments, household appliance controls, small LCD display modules, industrial sensor nodes, keypad interfaces, and LIN-connected peripherals. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V system designs. The 20-pin TSSOP package is also manageable for compact, cost-sensitive assemblies requiring through-hole visual inspection. Designers should verify clock, programming, reset, analog-reference, and LCD pin assignments against the manufacturer datasheet before laying out a PCB. Place the decoupling capacitor close to the supply pins, route sensitive analog inputs away from switching nodes, and confirm that the chosen LCD segment and button assignments match the available I/O resources. This page combines the manufacturer product information, verified distributor specifications, package details, practical application guidance, and a focused comparison of closely related S08 devices to support component selection without relying on a basic distributor listing alone.

Cotação Contato
MC9S08SU16VFK - 40MHz 16KB 8-Bit MCU | NXP | Motor Control
MC9S08SU16VFK

MC9S08SU16VFK - 40MHz 16KB 8-Bit MCU | NXP | Motor Control

The NXP Semiconductors MC9S08SU16VFK is an 8-bit S08L microcontroller with a 40 MHz processor, 16 KB of flash memory, UHV technology, GDU support, and a 24-QFN (4x4 mm) package. It is designed for low-end motor-control applications operating from 4.5 V to 18 V. The MCU combines an embedded processor, memory, analog measurement resources, and three-phase MOSFET pre-driver functions in one compact device. An 8-bit microcontroller is a compact embedded processor used to implement control logic, timers, communications, and peripheral functions in motor, appliance, and industrial products. The S08L core provides a deterministic architecture suitable for real-time control, while the integrated GDU and analog resources reduce the external component count required for basic motor-drive systems. MC9S08SU16VFK belongs to the broader MCU hierarchy: embedded processor, microcontroller, 8-bit MCU, and motor-control MCU. Key features include the enhanced S08L central processing unit, 16 KB flash memory, 40 MHz operation, UHV technology with GDU, a three-phase MOSFET pre-driver unit, current-measurement amplifiers, over-current protection, and over-voltage protection. The verified distributor listings identify the device as a 24-QFN surface-mount part, while the available product data also identifies it as an NRND device. The integrated three-phase pre-driver supports three high-side PMOS and three low-side NMOS arrangements, as described in the NXP datasheet search result. The current-measurement amplifiers, OCP, and OVP functions help simplify basic protection and feedback designs. Exact pin-level electrical limits, peripheral counts, memory organization, ADC specifications, and timing values require the manufacturer datasheet for final design verification. Typical applications include small brushless DC motor controllers, low-voltage motor-control systems, appliance controls, and compact embedded control platforms. The 4.5 V to 18 V application range makes the MCU appropriate for systems powered from low-voltage motor buses, provided the designer verifies the exact supply, I/O, and thermal limits for the selected board. For layout, place decoupling and power-return paths according to the NXP datasheet recommendations, and verify the exposed-pad connection and thermal design before production. Because the product is marked NRND in the verified NXP result, confirm lifecycle and sourcing status before committing a new design.

Cotação Contato
MC9S08SV16CBM - 8-Bit S08 MCU, 16KB Flash, 40MHz | NXP
MC9S08SV16CBM

MC9S08SV16CBM - 8-Bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP (formerly Freescale) MC9S08SV16CBM is an 8-bit HCS08 CISC microcontroller with 16KB flash, 1KB RAM, and a 40MHz CPU core, housed in a 32-pin SDIP (0.400", 10.16mm) through-hole package. It integrates 30 general-purpose I/O pins, an internal oscillator, and operates from a 2.7V to 5.5V supply across the industrial temperature range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (flash/RAM), and peripherals on one die. The HCS08 family is NXP's 8-bit line built on the legacy HC08 instruction set, designed for cost-sensitive embedded control in appliances, motor control, and industrial sensors. Within the broader hierarchy, this part sits as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The S08SV16 sub-family targets ultra-low-power and cost-sensitive nodes. Key features include an 8-bit HCS08 central processing unit running at 40MHz bus speed, 16KB on-chip flash program memory (16K x 8), 1KB on-chip SRAM, an internal clock source with FLL, multiple timer/PWM modules, and ADC channels. The 32-SDIP through-hole footprint supports legacy DIP-style designs, hand prototyping, and educational platforms where socketed parts are preferred over surface-mount. The architecture uses a von Neumann-style HCS08 core with the HC08 instruction set (a superset of the original HC05), enabling migration from older Freescale HC08 designs. The internal clock generator with FLL (Frequency-Locked Loop) supports both internal and external reference sources, eliminating the need for an external crystal in many applications. The device includes a low-voltage detect (LVD) module and a real-time interrupt (RTI) for low-power wait modes. Typical applications include white goods and home appliances, motor control for small BLDC or stepper drivers, HVAC controls, security and alarm panels, industrial sensor interfacing, and consumer electronics with simple user interfaces. The through-hole 32-SDIP package also makes it suitable for hobbyist, educational, and development use cases where socketed parts accelerate iteration. When designing with this part, verify that your firmware footprint fits within 16KB flash and 1KB RAM, and that the 30 I/O pins are sufficient for your peripheral count. For new designs, consider the surface-mount S08SV family members (LQFP/QFN) or the lower-cost S08PT family, but only after confirming pinout, peripheral set, and tool-chain compatibility. This page synthesizes distributor pricing from DigiKey/Mouser/Octopart, drop-in pin-compatible alternatives in the same 32-SDIP footprint, and practical design notes not found in the standalone datasheet.

Cotação Contato
MC9S08SV16CLC - 8-Bit S08 MCU, 16KB Flash, 40MHz, 32-LQFP | NXP
MC9S08SV16CLC

MC9S08SV16CLC - 8-Bit S08 MCU, 16KB Flash, 40MHz, 32-LQFP | NXP

The NXP MC9S08SV16CLC is an 8-bit microcontroller from the S08SV family, featuring a 40MHz HCS08 CPU with 16KB of on-chip Flash memory and 1KB RAM, housed in a 32-pin LQFP (7x7 mm) package. It is offered as part of the S08FL/S08SV series targeting cost-sensitive industrial embedded designs that need a balance of deterministic performance, modest memory, and robust peripheral integration. Background: An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically used in cost- and power-sensitive embedded applications. The HCS08 is NXP's enhanced 8-bit core, succeeding the legacy HC08 instruction set with improved instruction efficiency, lower power, and richer debug features. The S08SV family belongs to the broader S08 sub-family in NXP's 8/16/32-bit ColdFire+Power Architecture portfolio, positioned below the 32-bit Kinetis and ColdFire devices for simpler deterministic control tasks. Key features include a 40MHz bus clock derived from an internal oscillator, 30 general-purpose I/O pins, an interrupt priority controller with nested interrupt capability, and operation across the typical industrial 2.7V to 5.5V supply range. The S08SV family is engineered to give enhanced performance, system reliability, and design flexibility for tough industrial design requirements. On-chip peripherals commonly include timers, ADC, SCI/SPI/I2C communication modules, and a watchdog timer. The architecture combines a 16KB Flash program memory block with security/lock features, a 1KB SRAM data memory, and an internal oscillator that simplifies BOM by removing the need for an external crystal in many designs. The 32-LQFP (7x7) footprint is a mainstream industrial package with sufficient I/O for human-machine interface panels, sensor conditioning, and motor control auxiliary tasks. Typical applications include industrial control panels, building automation sensor nodes, white-goods user interfaces, low-end motor control auxiliary boards, and point-of-sale peripherals. The combination of 16KB Flash and 1KB RAM suits small protocol stacks and UI tasks in cost-constrained designs. When designing with the S08SV family, allocate at least 1KB of headroom below the 16KB Flash limit for a fail-safe bootloader or in-application programming region. Use CodeWarrior for S08 or NXP's Eclipse-based S08 tools with the standard HCS08 background-debug interface. This page synthesizes verified distributor pricing, parametric position, lifecycle context, and design recommendations from the NXP datasheet and cross-reference data not found on a single manufacturer page.

Cotação Contato
MC9S08SV8CBM - 8-bit S08 MCU, 8KB Flash, 40MHz, 32-SDIP | NXP
MC9S08SV8CBM

MC9S08SV8CBM - 8-bit S08 MCU, 8KB Flash, 40MHz, 32-SDIP | NXP

The NXP MC9S08SV8CBM is an 8-bit HCS08 microcontroller from the S08SV family, featuring 8KB of Flash program memory, 768 bytes of RAM, and a 40 MHz CPU, housed in a 32-pin SDIP (0.400", 10.16 mm) through-hole package. It integrates an internal oscillator, 30 general-purpose I/O lines, and the HC08 instruction set, making it a drop-in compatible member of the SV8 sub-family for cost-sensitive embedded designs. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines an 8-bit CPU core, program memory (Flash/ROM), data memory (RAM), peripherals, and I/O on a single die. In the broader system hierarchy, an MCU sits below microprocessors (MPUs) and above discrete logic, and it is classified within the embedded semiconductor family. The HCS08 (HC08 instruction set) family is NXP's ultra-low-cost, 5V-tolerant 8-bit line targeted at appliances, automotive body, and industrial control. Key features include 8KB (8K x 8) Flash program memory, 768 x 8 RAM, an 8-bit CPU up to 40 MHz bus clock, an internal oscillator eliminating external crystal cost, and 30 I/O lines shared with peripheral functions. Peripherals typically include timers (TPM), an ADC, SCI/SPI/I2C communication modules, and a low-voltage detect / reset block, supporting a 2.7 V to 5.5 V supply range across the operating temperature envelope. Architecturally, the HCS08 core uses a von-Neumann bus with a 16-bit stack pointer and indexed addressing modes. The 40 MHz internal bus, combined with Flash reads pipelined at 1 wait state, delivers effective throughput comparable to 50 MHz-class legacy HC08 parts, while the on-chip debug (BDC) interface simplifies in-circuit programming and field firmware updates. Typical applications include white-goods and appliance control boards, HVAC fan and blower modules, simple motor and lighting controllers, sensor conditioning front-ends, and aftermarket automotive body modules that benefit from the 5V-tolerant I/O and the 32-SDIP through-hole footprint for hand-prototyping and quick-turn assemblies. When designing, reserve the BKGD/MS pins for background debug, add 0.1 uF + 4.7 uF decoupling near the VDD pins, and confirm the IRQ routing matches your interrupt vector table; the through-hole SDIP footprint simplifies rework but consumes more board area than surface-mount QFP equivalents. This page synthesizes NXP datasheet specifications, distributor pricing, pin-compatible alternatives, and practical design notes that are not found on a single DigiKey or Mouser listing.

Cotação Contato
MC9S08SV8CLC - 8-Bit S08 MCU 40MHz 8KB Flash 32-LQFP | NXP
MC9S08SV8CLC

MC9S08SV8CLC - 8-Bit S08 MCU 40MHz 8KB Flash 32-LQFP | NXP

The NXP (Freescale) MC9S08SV8CLC is an 8-bit microcontroller based on the S08 (HCS08) core, running at up to 40 MHz CPU frequency with 8KB (8K x 8) of FLASH program memory and 768 bytes of RAM, housed in a 32-pin LQFP (7x7 mm) package with 30 general-purpose I/O lines. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest tier of the embedded processing hierarchy (MCU -> embedded processor -> application processor). The S08 family is NXP's 8-bit CISC architecture, an evolution of the HC08 instruction set with added debugging and low-power features, positioned for cost-sensitive embedded control. Key features of the MC9S08SV8CLC include internal oscillator operation (eliminating an external crystal in many designs), 5.5V-tolerant operation across the temperature range, and connectivity peripherals comprising I2C, LINbus, SCI, and SPI serial interfaces. System peripherals include low-voltage detect (LVD), power-on reset (POR), PWM capability, and a watchdog timer (WDT) for robust fault recovery. Architecturally, the HCS08 CPU executes the HC08 instruction set with enhancements for C-compiler efficiency and background debugging via a single-wire interface. The FLASH program memory is in-system programmable, and the internal clock sources reduce BOM cost and board area compared to crystal-based designs. Typical applications include small home appliances, automotive body electronics and LIN nodes, industrial sensor control, motor control辅助 logic, and low-cost human-machine interfaces where a 40 MHz 8-bit core with LIN connectivity is sufficient. The 5V-capable I/O simplifies interfacing with legacy 5V industrial signals. Design consideration: this part is marked Obsolete (no longer manufactured by NXP); new designs should select an active S08 successor, and existing designs should plan last-time-buy or qualification of a drop-in replacement. This page synthesizes distributor pricing, drop-in alternative analysis, pinout guidance, and practical design notes not found in a single datasheet, providing consolidated sourcing and engineering information for the MC9S08SV8CLC.

Cotação Contato
MC9S12A128BCFU - HCS12 16-Bit MCU 128KB Flash 80-QFP | NXP
MC9S12A128BCFU

MC9S12A128BCFU - HCS12 16-Bit MCU 128KB Flash 80-QFP | NXP

The NXP MC9S12A128BCFU is a 16-bit HCS12 CISC microcontroller operating at 25 MHz with 128KB on-chip Flash, 4KB RAM, and 2KB EEPROM, housed in an 80-pin QFP (14x14) package. It provides 59 general-purpose I/O pins, an 8-channel 10-bit ADC, and a CAN-compatible peripheral set, integrating standard on-chip peripherals to simplify automotive and industrial embedded designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), peripherals such as timers, ADC, and communication controllers, and a bus system. Within the embedded semiconductor hierarchy, an MCU sits between a microprocessor (no on-chip memory or peripherals) and an SoC (multi-core, often with application processors). The HCS12 belongs to the 16-bit microcontroller class, bridging 8-bit legacy designs and 32-bit ARM Cortex-M devices by offering automotive-grade peripherals and a CPU12 instruction set with CISC efficiency and high code density. The MC9S12A128BCFU is distinguished by its on-chip peripherals including an 8-channel 10-bit ADC, PWM channels, SCI/SPI communication interfaces, a CAN 2.0 module, and a system integration module (SIM). Operating from a 5V supply at industrial temperature range (-40C to +85C), it supports in-circuit debugging via the BKGD pin and offers robust reset and interrupt management. The HCS12 CPU delivers 25 MHz performance with a rich instruction set tuned for automotive real-time control. Internally, the device uses a 16-bit data path with an 8-bit external bus mode for memory interfacing, the MC9S12A128BCFU follows the HCS12 architecture: HCS12 CPU core -> 16-bit microcontroller -> embedded microcontroller -> IC. The device integrates standard on-chip peripherals as documented in the 9S12A128 Device Guide published by Motorola and now maintained by NXP. Operating voltage is typically 5V, with industrial-grade temperature support. Typical applications include automotive body electronics, industrial control systems, CAN node modules, sensor interface boards, motor control peripherals, and consumer appliances requiring 16-bit performance with CAN connectivity. Engineers often choose the MC9S12A128BCFU when migrating from older HC11/HC12 designs or designing cost-sensitive automotive ECUs. When designing with this MCU, ensure proper decoupling on VDDR, VDDX, and VDD1 pins, and follow NXP's recommendations for ECLK and reset pin conditioning. Background debug mode (BDM) allows non-intrusive debugging but requires proper BKGD pin pull-up and MODC configuration during reset. This page synthesizes distributor pricing, drop-in HCS12 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12A128BCPV - 16-Bit 25MHz HCS12 MCU 128KB Flash | NXP
MC9S12A128BCPV

MC9S12A128BCPV - 16-Bit 25MHz HCS12 MCU 128KB Flash | NXP

The NXP MC9S12A128BCPV is a 16-bit HCS12 microcontroller IC operating at 25 MHz with 128 KB (128K x 8) of on-chip FLASH program memory, housed in a 112-pin LQFP (20 x 20 mm) package. This member of the Freescale/NXP HCS12 family integrates a 16-bit CISC CPU core with 4 KB of RAM, an 8-channel 10-bit A/D converter, multiple timers, an SCI/SPI/JTAG interface block, and up to 91 general-purpose I/O pins for mixed-signal automotive and industrial designs. The part is sourced from NXP USA Inc. and is in active distribution through major channels. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and configurable peripherals around an instruction-driven I/O architecture. The HCS12 specifically is a 16-bit CISC microcontrollers family sitting in the broader hierarchy: HCS12 microcontroller -> 16-bit MCU -> Freescale/NXP S12 automotive MCU family -> embedded microcontroller -> semiconductor. The HCS12 architecture succeeded the HC11 and is widely deployed in body electronics, instrument clusters, and industrial motor control where deterministic interrupt response and rich analog/digital peripherals are required. Key features of the MC9S12A128BCPV include 128 KB of FLASH, 4 KB of RAM, 91 I/O pins, an 8-channel 10-bit ADC, two SCI modules, one SPI module, a CAN 2.0A/B controller, PWM channels, and a background debug mode (BDM) interface for non-intrusive in-circuit programming. The 112-LQFP package provides generous pin count for mixed-signal designs while remaining hand-solderable for low-volume prototypes. Industrial-grade temperature range (-40C to +85C ambient) and robust ESD protection make this MCU suited to harsh environments. Technically, the HCS12 core uses a 16-bit data path with a 20-bit address space reached via the PPAGE register, executing a CISC instruction set that is largely upward-compatible with the HC11. The on-chip oscillator supports an external crystal or resonator, with internal PLL options enabling the 25 MHz bus clock from common 4 MHz or 8 MHz references. The integrated voltage regulator (5V core from automotive 12V battery) simplifies power supply design in vehicle applications. The dedicated CAN (Controller Area Network) module provides hardware-accelerated 2.0A/B frame handling for in-vehicle networking. Typical applications include automotive body controllers, HVAC control modules, instrument cluster slaves, CAN-enabled sensor nodes, industrial PLC I/O modules, and HVAC blower/lighting controllers. The 128 KB FLASH supports OBD-II diagnostic firmware, multi-channel closed-loop PID control loops, and CAN-based diagnostic stacks. When designing with this MCU, reserve the upper portion of the memory map for interrupt vectors and bootloader area and enable the COP watchdog in safety-critical applications. Program the FLASH using BDM during development; production programming can use the in-application programming (IAP) routines with security-locked blocks. This page synthesizes distributor pricing (as of 2026-10-18), drop-in alternatives, comparison vs MC9S12C-family variants, and practical design notes that complement the NXP S12 datasheet.

Cotação Contato
MC9S12A256BCFU - HCS12 16-Bit 25MHz 256KB Flash MCU | NXP
MC9S12A256BCFU

MC9S12A256BCFU - HCS12 16-Bit 25MHz 256KB Flash MCU | NXP

The NXP MC9S12A256BCFU is a 16-bit HCS12-family microcontroller with 256KB of on-chip Flash memory, 12KB RAM, and a 25MHz CPU core, housed in an 80-pin QFP (14x14 mm) surface-mount package. It integrates an HCS12 CPU, 256KB (256K x 8) program Flash, 4KB EEPROM, 12KB RAM, and a rich set of peripherals including multiple SCI/SPI/PWM/timer modules and a 10-bit ADC. A microcontroller (MCU) is a self-contained processing system that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripheral interfaces on a single silicon die. The HCS12 architecture is a 16-bit CISC core from the Motorola/Freescale (now NXP) S12 family, designed for deterministic real-time control in automotive and industrial applications, and positioned hierarchically as: HCS12 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The MC9S12A256BCFU is one of the highest-memory-density members of the original S12A sub-family. Key features include 256KB on-chip Flash (in-application reprogrammable in 512-byte sectors), 4KB EEPROM for data storage, 12KB RAM, 8-channel 10-bit ADC, up to 25MHz bus clock via an on-chip PLL, two SCI, two SPI, an 8-channel 16-bit timer with PWM, and a CAN 2.0 A/B module. The part operates from a single 5V supply and supports an industrial -40C to +85C temperature range, making it suitable for under-hood and factory-floor environments. Architecturally, the HCS12 core uses a 16-bit accumulator-based ALU with enhanced indexed addressing, background debug mode (BDM) for non-intrusive in-circuit development, and a memory management scheme supporting up to 1MB linear address space. The 80-QFP package exposes the full set of multiplexed GPIO, ADC inputs, and communication lines, enabling direct PCB integration of complex node functions without external glue logic. Typical applications include automotive body controllers, instrument cluster electronics, industrial CAN nodes, sensor aggregation hubs, and ruggedized embedded control boards. The on-chip CAN 2.0 module is particularly valuable in distributed vehicle networks where deterministic multi-node communication is required. The wide operating temperature range and high-noise-immunity design also suit HVAC and motor control appliances. When designing with this MCU, plan for a 5V analog supply and a 5V digital supply (which may be tied together with proper decoupling), plus a noise-isolated 2.5V AVDD for the ADC. Use the BDM interface for development and field firmware update via the in-application Flash programmer, and allocate adequate PCB ground area beneath the exposed die-pad to meet thermal and EMI requirements. This page synthesizes distributor stock, same-package drop-in alternates, and practical design notes not found in any single distributor listing, giving engineers a single source to evaluate MC9S12A256BCFU for new designs, second-source qualification, or legacy board rework.

Cotação Contato
MC9S12A256BCPV - 16-bit HCS12 MCU 256KB Flash 112-LQFP | NXP
MC9S12A256BCPV

MC9S12A256BCPV - 16-bit HCS12 MCU 256KB Flash 112-LQFP | NXP

The NXP MC9S12A256BCPV is a 16-bit HCS12 CISC microcontroller featuring 256KB (256K x 8) of on-chip Flash memory, packaged in a 112-pin LQFP (20x20 mm). It operates from a 2.5V or 5V supply with an input range of 2.35V to 5.25V and runs the HCS12 CPU core at up to 25 MHz. According to the NXP datasheet, this device integrates 12 KB of RAM, automotive-grade peripherals, and is targeted at body and chassis electronic control modules. An HCS12 microcontroller is a 16-bit CISC (Complex Instruction Set Computer) MCU from the Motorola/Freescale lineage now maintained by NXP Semiconductors. It belongs to the broader hierarchy: microcontroller -> embedded microcontroller -> 16-bit MCU -> automotive microcontroller. The HCS12 architecture improves on the earlier HC11/HC12 by adding a 16-bit data path, a richer instruction set, and an enhanced integration module (SIM) for system-level resource mapping. Key features of the MC9S12A256BCPV include 256 KB Flash, 12 KB RAM, an integrated CAN 2.0 module, multiple SCI/SPI serial interfaces, an 8-channel 10-bit ADC, and PWM outputs suitable for motor and actuator control. The 112-LQFP package exposes a wide external bus that can be configured to 8-bit narrow mode for memory interfacing, allowing designers to attach external peripherals or memory. The device is built on a mature 0.5 um process and uses the HCS12 CPU with a background debug mode (BDM) for non-intrusive in-circuit debugging. The system integration module (SIM) governs clock generation, interrupt control, and chip-select routing, simplifying the BOM for body controllers. With 25 MHz bus speed, the device delivers up to 25 MIPS, suitable for closed-loop control loops in automotive subsystems. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, and CAN node endpoints. The integrated CAN 2.0 controller and large Flash make it a drop-in solution for legacy automotive ECUs and a wide range of industrial control nodes that require CAN connectivity and deterministic 16-bit performance. When designing with this part, allocate adequate decoupling on each supply pin and respect the 2.35V to 5.25V operating range. For low-power standby, use the STOP and WAIT modes controlled through the SIM. Engineers transitioning from the older HC11/HC12 will find instruction-level compatibility, easing firmware porting. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the MC9S12A256BCPV for new designs and legacy drop-in replacement scenarios.

Cotação Contato
MC9S12A256CCPV - 16-bit 25MHz MCU | NXP | Automotive
MC9S12A256CCPV

MC9S12A256CCPV - 16-bit 25MHz MCU | NXP | Automotive

The NXP Semiconductors MC9S12A256CCPV is a 16-bit HCS12 microcontroller operating at up to 25 MHz, with 256 KB of Flash memory, in a 112-LQFP surface-mount package. It belongs to the S12A family and integrates an HCS12 CPU, standard on-chip peripherals, interrupt control, clock generation, and external bus interfacing. The verified distributor information identifies the device as a 256K x 8 Flash MCU with a 25 MHz maximum clock. A microcontroller is a programmable semiconductor device that combines a CPU core, memory, timers, communication interfaces, interrupt logic, and other peripherals on one integrated circuit. In the power-management and embedded hierarchy, the MC9S12A256CCPV is an embedded microcontroller rather than a discrete semiconductor or analog power component. Its 16-bit data paths support automotive and industrial control tasks requiring deterministic embedded processing and external peripheral integration. The principal verified feature set includes a 16-bit HCS12 core, 25 MHz operating frequency, 256 KB Flash, and 112-pin LQFP packaging. The LQFP package provides a larger lead-bearing footprint than small QFN packages and is suitable for boards that need accessible inspection, rework, or a conventional leaded SMT assembly process. Flash memory supports firmware storage, while the integrated system resources simplify clock, interrupt, and bus management. Typical application areas include automotive body and chassis electronics, industrial controllers, embedded control modules, sensor-conditioning systems, and communication hubs. A design should provide the required clock, reset, power, and decoupling arrangements, and should validate every peripheral pin against the manufacturer datasheet. Because the provided search results do not expose the complete electrical limits or package drawing, detailed voltage, temperature, timing, and pin-function values must be confirmed from the original documentation. The most important sourcing consideration is package and pin compatibility. MC9S12A256CPVE is also identified in distributor results as a 112-LQFP, 256 KB Flash, 25 MHz S12A MCU, but the supplied data does not explicitly establish a complete pin-to-pin equivalence for the exact CCPV ordering code. Verify the datasheet, temperature grade, qualification marking, and lifecycle status before substituting. This page consolidates verified distributor findings, the available datasheet references, practical design guidance, and sourcing constraints. It does not infer unverified RAM size, peripheral details, electrical ratings, pricing tiers, or cross-brand replacements. For production sourcing, confirm the exact ordering information, authorized distributor inventory, and manufacturer documentation before committing the design to manufacturing.

Cotação Contato
MC9S12A256CFUE - 16-bit 25MHz 256KB Flash MCU | NXP
MC9S12A256CFUE

MC9S12A256CFUE - 16-bit 25MHz 256KB Flash MCU | NXP

The NXP MC9S12A256CFUE is a 16-bit HCS12 microcontroller with a 25 MHz bus, 256 KB of on-chip Flash memory, and an 80-pin QFP (14x14 mm) surface-mount package. It operates from a single 5 V supply (2.5 V core support per NXP automotive S12 documentation) and is positioned for automotive and industrial embedded control. An HCS12 MCU is a member of the 16-bit microcontroller family: microcontroller -> embedded processor -> semiconductor. The HCS12 (S12) architecture evolved from the Freescale (formerly Motorola) HC12 and 68HC11 lineages, providing full 16-bit data paths with a CISC instruction set that eases migration from legacy 8-bit designs. According to NXP's product page, the S12A family integrates a system integration module (SIM) that manages system resource mapping, clock generation, interrupt control, and bus interfacing. Key features include 256 KB of Flash program memory for demanding application code, 25 MHz bus operation for real-time control, and a rich peripheral set typical of the S12A family: asynchronous serial interfaces (SCI), serial peripheral interface (SPI), an 8-channel 10-bit ADC, timer/PWM modules, and a CAN 2.0A/B controller for automotive networking. The 80-QFP 14x14 mm footprint supports hand assembly and automated reflow, and the wide industrial temperature range suits harsh environments. Architecturally, the HCS12 CPU executes variable-length instructions with indexed addressing and background debug mode (BDM) via a single-wire interface, simplifying in-system flash programming and field diagnostics. The phase-locked loop (PLL) clock generator allows the bus frequency to be tuned from a low-cost crystal while minimizing EMI. Typical applications include automotive body and comfort modules (door control, seat control, lighting), industrial control panels, HVAC controllers, motor control interfaces, and instrumentation requiring CAN connectivity. Design consideration: the device is NRND (Not Recommended for New Designs) per NXP, so new designs should evaluate the pin-compatible S12G or S12P families, or use this part only for sustaining existing production. This page synthesizes distributor pricing, same-family drop-in alternatives, lifecycle status, and practical design guidance not found in a single manufacturer datasheet.

Cotação Contato
MC9S12A256MPVE - 16-bit HCS12 MCU, 256KB Flash, 25MHz | NXP
MC9S12A256MPVE

MC9S12A256MPVE - 16-bit HCS12 MCU, 256KB Flash, 25MHz | NXP

The NXP MC9S12A256MPVE is a 16-bit microcontroller based on the HCS12 CPU core, delivering 25 MHz performance with 256 KB on-chip Flash and 12 KB RAM in a 112-pin LQFP (20x20 mm) package. Marked NXP as NRND (Not Recommended for New Designs), this BARRACUDA4 family member integrates a rich set of on-chip peripherals designed for automotive and industrial embedded applications. A microcontroller (MCU) is an integrated circuit containing a processor, memory (Flash for program storage and RAM for working storage), and programmable I/O peripherals on a single die. MCUs sit in the system hierarchy as: microcontroller -> embedded processor -> semiconductor IC. The HCS12 architecture is a 16-bit CISC core widely deployed in body, chassis, and powertrain ECUs, offering deterministic interrupt behaviour and a memory-mapped peripheral set that simplifies long-lifecycle automotive designs. Key features include 256 KB of on-chip Flash for program storage, 12 KB of RAM for working data, up to 91 general-purpose I/O pins for external interfacing, and a 25 MHz bus clock for instruction throughput. Integrated peripherals typically include multiple PWM channels, timers (ECT/PWM/TIM), SCI and SPI communication blocks, a 10-bit or 12-bit ADC, and a CAN 2.0 controller, supporting a wide range of automotive and industrial sensor and actuator interfaces. The 112-LQFP package provides ample pin count for full external bus and peripheral breakout. The HCS12 core uses a 16-bit data path with a programmable 8-bit or 16-bit external bus interface, allowing both 8-bit and 16-bit memory expansion. The integrated system integration module (SIM) handles clock generation, interrupt arbitration, and chip-select decoding, reducing external logic and BOM cost. The 112-LQFP (20x20 mm) surface-mount package offers reliable PCB manufacturability. A representative application is automotive body control modules where the HCS12's CAN bus, PWM, and ADC peripherals interface directly with sensors and actuators. Another common use is industrial PLC I/O expansion, where the large I/O count and CAN/SPI peripherals enable distributed I/O nodes. Powertrain and chassis ECUs historically adopted this family for its deterministic interrupt latency. When designing with this device, consider migrating to the S12X or S12XE family for new designs, since the part is NXP listed as NRND. Existing programs using the HCS12 should plan PCN-driven migration to the S912XEQ512 or similar newer variants sharing the same 112-LQFP footprint.

Cotação Contato
MC9S12A32CFUE - 16-bit HCS12 MCU 32KB Flash 80-QFP | NXP
MC9S12A32CFUE

MC9S12A32CFUE - 16-bit HCS12 MCU 32KB Flash 80-QFP | NXP

The NXP Semiconductors MC9S12A32CFUE is a 16-bit HCS12 microcontroller (MCU) running at up to 25 MHz with 32KB of FLASH program memory, 4KB of RAM, and a 2.97V to 5.5V supply range, housed in an 80-pin QFP (14x14 mm) surface-mount package. A 16-bit microcontroller is a single-chip computer whose CPU processes 16-bit data words, sitting above 8-bit MCUs (better math throughput, larger address space) and below 32-bit MCUs (lower cost and complexity). The S12A family belongs to the HCS12 (S12) architecture originally developed by Freescale Semiconductor, now part of NXP, and is a member of the broader automotive and industrial microcontroller / embedded processor hierarchy. Full 16-bit data paths run throughout the core, managed by a system integration module (SIM) that handles resource mapping, clock generation, interrupt control, and bus interfacing. Key features include the CISC HCS12 CPU core clocked at 25 MHz, 32KB (32K x 8) on-chip FLASH with in-application reprogrammability, 4KB RAM, an on-chip phase-locked loop (PLL) that lets the core run faster than the reference crystal to cut power consumption and EMI, and a 10-bit ADC. The wide 2.5V/5V supply class and automotive-grade pedigree make it tolerant of harsh electrical environments. Architecturally, the S12A integrates standard on-chip peripherals around the HCS12 core, with the external bus capable of operating in an 8-bit narrow mode so single 8-bit-wide memories can be interfaced - useful for cost-optimized system expansions. The PLL-based clock generation allows designers to trade bus speed against current draw dynamically. Typical applications include automotive body electronics (door modules, seat control, lighting), industrial control and motor management, building automation, and legacy HCS12 system maintenance, where proven 5V-tolerant I/O and mature toolchains are valued. Design consideration: since this device is NRND (Not Recommended for New Designs) per NXP, plan second-source migration to the S12G or S12P families for new projects, and verify FLASH endurance budgets for applications with frequent reprogramming. This page synthesizes distributor pricing, drop-in family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S12A512CPVE - 16-bit HCS12 MCU 512KB Flash | NXP
MC9S12A512CPVE

MC9S12A512CPVE - 16-bit HCS12 MCU 512KB Flash | NXP

The NXP Semiconductors MC9S12A512CPVE is a 16-bit HCS12 microcontroller with 512KB of Flash memory, 25 MHz bus operation, and an 8-channel 10-bit ADC, housed in a 112-pin LQFP (20x20 mm) package. It is AEC-Q100 qualified for automotive applications and ships in tray packaging. A 16-bit microcontroller is a single-chip embedded processor whose arithmetic logic unit and data paths are 16 bits wide, sitting between 8-bit MCUs (low cost, simple control) and 32-bit MCUs (high computation, connectivity). Within the power-management and embedded-control hierarchy, the HCS12 (S12) family - originally developed by Motorola and Freescale Semiconductor, now NXP - is a CISC-derived architecture widely used for body electronics, instrumentation, and motor control. The MC9S12A512 belongs to the Whaleshark/A-family of S12 devices, where the System Integration Module (SIM) manages resource mapping, clock generation, interrupt control, and bus interfacing. Key features include 512KB (512K x 8) of on-chip Flash program memory, full 16-bit data paths with a 25 MHz bus clock, and an external bus that can operate in an 8-bit narrow mode so single 8-bit-wide memories can be interfaced. This narrow-mode capability reduces external bus cost in cost-sensitive designs. The device also integrates standard on-chip peripherals typical of the S12 platform, including serial communication interfaces (SCI), serial peripheral interface (SPI), I2C bus, timer modules with PWM outputs, and an 8-channel 10-bit analog-to-digital converter. Architecturally, the enhanced HCS12 CPU executes a CISC instruction set with dense, byte-efficient code, which suits legacy code reuse and long-life automotive platforms. On-chip Flash with in-application programming supports field updates, while the PLL-based clock generation allows an external low-frequency crystal to generate the 25 MHz internal bus frequency, reducing EMI. Typical applications include automotive body control modules, instrument clusters, industrial control systems, HVAC controllers, and motor control nodes - anywhere a rugged 16-bit MCU with large on-chip Flash and AEC-Q100 qualification is required. The wide 5V-tolerant I/O ecosystem makes it easy to interface with legacy sensors and actuators. One key design consideration is supply architecture: the device uses separate 5V and internal 2.5V regulator domains, so follow NXP layout guidance for VDDA/VSSA decoupling and the low-EMI PLL filter network. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S12A64CFUE - HCS12 16-bit MCU, 64KB Flash, 25MHz, 80-QFP | NXP
MC9S12A64CFUE

MC9S12A64CFUE - HCS12 16-bit MCU, 64KB Flash, 25MHz, 80-QFP | NXP

The NXP Semiconductors MC9S12A64CFUE is a 16-bit HCS12 microcontroller unit (MCU) operating at up to 25 MHz, integrating 64 KB of on-chip Flash, 4 KB of RAM and 1 KB of EEPROM in an 80-pin QFP (14x14 mm) package. It belongs to the S12A family, an enhanced HCS12 core with CISC architecture designed for cost-sensitive automotive body and chassis electronics. An MCU (microcontroller unit) is a single-chip computer containing a CPU, memory and programmable peripherals, used to sense, decide and actuate in embedded systems. Within the broader semiconductor taxonomy, the MC9S12A64CFUE sits in the chain: microcontroller -> embedded MCU -> 16-bit MCU -> HCS12 family -> S12A sub-family -> automotive-grade body controller. The HCS12 core itself descended from the Freescale (now NXP) HC12, optimized for deterministic interrupt response and 16-bit arithmetic in real-time control loops. Key features include a 25 MHz bus clock, an 8-channel 10-bit ADC, two SCI (UART) channels, one SPI port, one I2C bus, a CAN 2.0 A/B controller, an 8-channel 16-bit PWM module with centre- or edge-aligned modes, and 59 general-purpose I/O lines multiplexed across the 80-QFP. The device includes a 4-channel TIM (ECT) timer, a periodic interrupt timer, an 8-bit accelerometer-friendly PWM, a watchdog timer, and on-chip voltage regulation allowing single 5 V supply operation from 2.35 V to 5.25 V. Architecturally the part uses a 16-bit data path internally, with an external bus interface that can be configured to 8-bit narrow mode for low-cost memory expansion. The 64 KB Flash is organised as a single linear array with EEPROM for non-volatile user data and a security lock mechanism to protect firmware IP. Typical applications include automotive body controllers (door modules, seat controllers, mirror adjusters, HVAC panels), industrial CAN nodes, building automation gateways, low-speed sensor hubs, and appliance motor controllers that benefit from CAN connectivity and PWM-driven H-bridge control. The wide operating voltage range and automotive temperature grade (AEC-Q100 qualified) make it well suited to 12 V automotive battery environments. When designing with this MCU, allocate the 64 KB Flash carefully: bootloader plus application typically leaves 32-48 KB for code. Use BDM (Background Debug Mode) via the dedicated BKGD pin for in-circuit programming and debug, and ensure the CAN bus termination and transceiver (e.g. TJA1050) are matched to the MCU's internal CAN controller. This page synthesises distributor pricing, drop-in S12A-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12A64CPVE - 16-bit HCS12 MCU 64KB Flash 25MHz | NXP
MC9S12A64CPVE

MC9S12A64CPVE - 16-bit HCS12 MCU 64KB Flash 25MHz | NXP

The NXP Semiconductors MC9S12A64CPVE is a 16-bit HCS12 microcontroller with a 25 MHz bus, 64KB of on-chip Flash memory, and a 112-pin LQFP (20x20 mm) package. The device integrates standard on-chip peripherals managed by the system integration module (SIM), with full 16-bit data paths throughout. A 16-bit microcontroller (MCU) is a complete computing system on a single chip that combines a processor core, program memory, data memory, and peripheral functions such as timers, serial interfaces, and analog-to-digital converters. Within the MCU hierarchy, the HCS12 family sits in the broader 16-bit embedded controller category, descending from the Freescale (Motorola) HC12 and 68HC11 lineage that has served industrial and automotive platforms for decades. NXP, which acquired Freescale Semiconductor, continues to supply this family for legacy designs. Key features of the MC9S12A64CPVE include the HCS12 CPU core with CISC instruction set, 64KB (64K x 8) of Flash program memory, and a maximum bus frequency of 25 MHz. The system integration module handles resource mapping, clock generation, interrupt control, and bus interfacing. An external bus narrow mode allows the 16-bit bus to operate in 8-bit mode, enabling interfacing with single 8-bit-wide external memory devices. The architecture provides a 2.5V/5V supply environment per cross-reference data, with the core and I/O engineered around the classic 5V-tolerant HCS12 electrical profile that made the family popular in noisy automotive and industrial environments where 5V signaling remains standard. Peripherals typically found across the S12A family include SCI serial ports, SPI, an ATD analog-to-digital converter, timer channels, and PWM outputs, all controlled through memory-mapped registers. Typical applications include automotive body electronics, industrial control systems, motor control nodes, instrumentation, and legacy product lines requiring continued sourcing of proven HCS12 silicon. The 112-pin LQFP offers generous I/O count for relays, sensors, and communication expansion. Design consideration: this part is classified NRND (Not Recommended for New Designs) by NXP, so new designs should evaluate S12G, S12Z, or MagniV successors, while existing designs can continue to source this part for maintenance. This page synthesizes distributor pricing, drop-in alternatives within the S12 family, and practical design notes not found in the manufacturer datasheet, with pricing data as of 2026-10-18.

Cotação Contato
MC9S12B128CFUE - 16-bit S12 MCU, 128KB Flash, 25MHz | NXP
MC9S12B128CFUE

MC9S12B128CFUE - 16-bit S12 MCU, 128KB Flash, 25MHz | NXP

The NXP MC9S12B128CFUE is a 16-bit HCS12 (S12B) microcontroller featuring 128 KB on-chip Flash, 25 MHz bus clock, and a wide peripheral set, housed in an 80-pin LQFP (14x14 mm) package. Designed for automotive multiplexing applications, it operates across -40C to +85C and integrates a CAN 2.0 module, multiple SCI/SPI ports, timers, and an 8-channel 10-bit ADC. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single die. The HCS12 (also known as S12) family belongs to the 16-bit MCU category within the broader microcontroller hierarchy: HCS12 -> 16-bit MCU -> automotive MCU -> embedded microcontroller -> semiconductor. MC9S12B variants are fully pin-compatible within the family, enabling designers to scale memory and peripheral choices without PCB rework. Key features of the MC9S12B128CFUE include 128 KB Flash, 4 KB EEPROM, 8 KB RAM, a 25 MHz HCS12 core with background-debug mode (BDM), an MSCAN (CAN 2.0 A/B) controller, three SCI, two SPI, an 8-channel 10-bit ADC, an 8-channel PWM, and up to 59 general-purpose I/O pins. The on-chip voltage regulator and oscillator reduce external component count, while the integrated CAN module suits automotive network nodes. Architecturally, the device uses a von Neumann bus architecture with a 16-bit CPU, multi-stage interrupt controller, and dedicated peripheral sub-systems. The Flash is organized as 128K x 8, and the part supports in-circuit programming and security features such as Flash block protection. With the 25 MHz bus clock, the S12B core typically delivers around 1 MIPS/MHz class throughput, balancing deterministic automotive-grade performance with low power consumption. Typical applications include automotive body controllers, door modules, HVAC panels, instrument clusters, and industrial CAN nodes. The wide operating temperature range and AEC-Q100 lineage make it especially suited to under-hood and cabin electronics where reliability and CAN connectivity are mandatory. When designing with this MCU, ensure that the BDM interface is accessible for in-circuit debug, and place decoupling capacitors adjacent to each supply pin. The MSCAN module's bus termination must be evaluated against the network topology to avoid reflections and bit-error issues. This page consolidates distributor pricing, drop-in alternatives drawn from the same HCS12 family, and practical design notes not found in the standalone datasheet.

Cotação Contato
MC9S12B128MFU - 16-Bit 50MHz 128KB Flash MCU | NXP
MC9S12B128MFU

MC9S12B128MFU - 16-Bit 50MHz 128KB Flash MCU | NXP

The NXP Semiconductors MC9S12B128MFU is a 16-bit, 50 MHz flash-based microcontroller with 128 KB of program memory, supplied in an 80-pin QFP package measuring 14 x 14 mm. It belongs to the MC9S12B automotive-multiplexing family and is intended for embedded control systems requiring deterministic real-time performance, broad peripheral integration, and scalable family-compatible pin assignments. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, timers, communication interfaces, and input/output ports onto one device. Within the product hierarchy, the MC9S12B128MFU is a 16-bit MCU, a flash-based embedded controller, and an automotive-oriented system-on-chip. Its integration reduces external component count while providing dedicated resources for body, vehicle-network, and industrial control functions. The verified source data identifies a 50 MHz operating frequency, 16-bit architecture, and 128 KB organized as 128K x 8 flash memory. The family documentation states that MC9S12B devices are designed for automotive multiplexing applications and are fully pin compatible, enabling different memory and peripheral options within a scalable design platform. That family-level compatibility is useful when products need common hardware across multiple MCU variants. The 80-QFP mechanical format provides a fine-pitch surface-mount solution with external pins on all four sides. Compared with a higher pin-count ball-grid-array package, the QFP simplifies visual inspection, rework, and prototype assembly, although it requires careful board-level escape routing. Its 14 x 14 mm body saves board area relative to many larger legacy packages while remaining compatible with established automated assembly processes. Typical uses include automotive body-control modules, multiplexing controllers, sensor-interface nodes, actuator controllers, and other embedded systems that benefit from a deterministic 16-bit architecture. In these systems, the MCU can acquire sensor inputs, execute control logic, manage timers and communication events, and drive external circuitry from a single integrated device. Detailed peripheral assignments, voltage limits, memory-map behavior, and electrical conditions must be confirmed in the manufacturer datasheet before design release. When laying out a new board, preserve the package land pattern, pin assignment, power distribution, decoupling, programming access, and exposed support-network requirements of the exact ordered device. Do not assume that every member of the MC9S12B family is a drop-in replacement solely because the family is pin compatible; memory capacity, package suffix, clocking, peripherals, and software device configuration can differ. This page consolidates verified distributor specifications, family-level application context, sourcing information, and design cautions. It also separates known facts from unavailable data rather than estimating unverified electrical limits, pricing, pin functions, lifecycle status, or cross-device compatibility.

Cotação Contato
MC9S12B128MFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP
MC9S12B128MFUE

MC9S12B128MFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP

The NXP MC9S12B128MFUE is a 16-bit HCS12 microcontroller with 128KB Flash, 25MHz CPU, and 80-pin QFP package, AEC-Q100 qualified for automotive multiplexing. An HCS12 microcontroller is a 16-bit automotive-grade MCU built on the Freescale/NXP HCS12 CPU core. The HCS12 sits within the broader taxonomy: microcontroller (MCU) -> embedded microcontroller -> automotive MCU -> 16-bit MCU -> HCS12 family. It is designed for body and chassis electronics that demand deterministic real-time behaviour, on-chip peripherals for CAN/LIN networking, and operation across the -40C to +125C automotive temperature range. Key features include 128KB of on-chip Flash for application code and data, 2KB of EEPROM for non-volatile parameters, 4KB of RAM, an HCS12 CPU core running at 25MHz bus speed, and an integrated CAN 2.0 module plus multiple SCI/SPI peripherals. The device is offered in an 80-pin QFP package (14x14 mm) that is fully pin-compatible with the rest of the MC9S12B-Family, allowing designers to migrate between memory sizes and peripheral mixes without PCB rework. The MC9S12B128MFUE is built on NXP's 0.25 micron automotive CMOS process and includes a phased-locked loop (PLL) for flexible clock generation, a 16-channel 10-bit ADC for sensor reading, and a PWM module with up to 8 channels for motor or lighting control. Background Debug Mode (BDM) is supported for non-intrusive in-circuit debugging, and the on-chip voltage regulator simplifies single-supply 5V operation. Typical applications include automotive body controllers, door modules, seat controllers, instrument cluster slaves, HVAC control modules, and CAN/LIN gateway nodes. Members of the MC9S12B family are widely deployed in body-electronics multiplexing where dozens of ECUs share a CAN backbone. When designing with this MCU, designers should budget Flash endurance (typically 100K cycles) and use the integrated EEPROM for parameter storage rather than the Flash array. The 80-pin QFP footprint leaves most GPIO and peripheral pins available; consult the pinout diagram before committing a PCB layout because not every signal is bonded out on every package variant. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop reference for sourcing the MC9S12B128MFUE.

Cotação Contato
MC9S12B128MPVE - 16-Bit HCS12 MCU 128KB Flash 25MHz | NXP
MC9S12B128MPVE

MC9S12B128MPVE - 16-Bit HCS12 MCU 128KB Flash 25MHz | NXP

The NXP MC9S12B128MPVE is a 16-bit HCS12 microcontroller from the MC9S12B-Family (codename "Sturgeon"), integrating 128KB on-chip Flash, 4KB RAM, and 1KB EEPROM into a 112-pin LQFP (20x20 mm) package. It operates at up to 25 MHz bus clock, is engineered for automotive multiplexing body-electronics applications, and is fully pin-compatible across the B-Family allowing scalable memory/peripheral selection without PCB rework. A 16-bit microcontroller (MCU) is an embedded processor whose central data path is 16 bits wide, sitting between 8-bit/32-bit MCUs in the broader taxonomy of microcontrollers -> embedded processors -> integrated circuits -> semiconductors. The HCS12 family (also called S12) is the 16-bit evolution of Freescale's (now NXP) HC11 architecture and is widely deployed in automotive body controllers because of its deterministic interrupt handling, on-chip CAN, and enhanced EEPROM/Flash subsystems that survive harsh under-hood environments. Key features include a 25 MHz HCS12 CPU core, 128KB Flash with byte-erasable sectors for in-application reprogramming, up to 8-channel 10-bit ADC, 1MB/s CAN 2.0 interface (MSCAN12), up to 6 PWM channels, two SCI (UART) ports, and a SPI-compatible serial peripheral interface. The B-Family's pin-compatibility across MC9S12B32/B64/B128/B256 simplifies design migration when more or less memory is needed without layout changes. Architecturally the device uses a unified 16-bit address space with banked memory to access the full 128KB Flash through a 16-bit Program Page register, an enhanced XGATE co-processor is not present on this sub-family, keeping interrupt latency predictable. An on-chip PLL generates the 25 MHz bus clock from an external 4 MHz-16 MHz crystal, and a 1.5KB emulated EEPROM provides byte-write endurance without external wear-leveling firmware. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, door/seat modules, and LIN/CAN gateway nodes. The MC9S12B128MPVE also fits industrial multiplexed I/O, motor control auxiliary logic, and white-goods user-interface boards where CAN connectivity and automotive-grade robustness are required. When designing with this MCU, place a 100 nF decoupling capacitor on every VDD/VSS pair within 5 mm of the pin, route the CAN bus with 120 ohm termination at both ends, and observe the oscillator PCB layout rules in the MC9S12B128 reference manual to avoid EMC failures. Brown-out and watchdog reset circuits are on-chip, but the external RESET pin must be held low for the minimum reset pulse width at start-up. This page synthesizes distributor pricing, same-brand drop-in alternatives within the B-Family, and practical design notes not found in the manufacturer datasheet - giving engineers a single reference for sourcing, replacement, and layout decisions.

Cotação Contato
MC9S12B128VFUE - 16-Bit 25MHz HCS12 MCU 128KB Flash | NXP
MC9S12B128VFUE

MC9S12B128VFUE - 16-Bit 25MHz HCS12 MCU 128KB Flash | NXP

The NXP MC9S12B128VFUE is a 16-bit HCS12 CISC microcontroller operating at 25 MHz with 128 KB of on-chip Flash memory and an 80-pin QFP (14x14 mm) footprint. It is a member of the Freescale/NXP S12B family designed for automotive multiplexing and body-electronics applications. An HCS12 microcontroller is a 16-bit CISC (Complex Instruction Set Computer) MCU built around the HCS12 CPU core, falling under the broader category of microcontrollers -> embedded processors -> microprocessors -> semiconductors. The HCS12 architecture extends the earlier HC12 with enhanced instruction set, hardware debug (BDM) support, and richer peripheral integration, while keeping code compatibility with the legacy HC12 instruction set. The S12B sub-family specifically targets cost-sensitive automotive body and chassis applications where moderate Flash density and a rich peripheral mix are needed. Key features of the MC9S12B128VFUE include 128 KB Flash program memory, 4 KB RAM, 1 KB EEPROM, an 8-channel 10-bit ADC, multiple CAN / SCI / SPI / I2C interfaces, and an operating voltage range of 2.5 V to 5 V. The on-chip HCS12 core delivers deterministic interrupt response and integrated background debug mode (BDM), enabling in-circuit programming and real-time development without external emulators. The 80-QFP (PQFP) package supports easy manufacturing with conventional surface-mount processes. The MC9S12B128VFUE implements the HCS12 CISC core with a 16-bit ALU, 16-bit index registers and a unified address space that simplifies C compiler code generation. Its peripheral set is managed by the System Integration Module (SIM), which handles clock generation, interrupt prioritization, chip-select routing and external bus configuration. Internal phase-locked loop (PLL) and on-chip voltage regulator allow flexible oscillator selection while keeping the core on a stable internal rail. Typical applications include automotive body controllers, climate/HVAC modules, instrument clusters, lighting control modules, seat and door-zone modules, and industrial CAN nodes. The integrated CAN 2.0 A/B controller makes it especially well-suited for in-vehicle networks where LIN/CAN gateway functions are required. When designing with the MC9S12B128VFUE, route the BDM signals (BKGD, MODC) to a 6-pin standard debug header to keep development and field-update paths open, and pay close attention to decoupling near each VDD/VSS pair on the 80-QFP package. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design considerations that complement the manufacturer datasheet and help engineers shorten the component-selection cycle.

Cotação Contato