Microcontroladores

Produtos (20.000+)

MC9S12XDT512MPV - 80MHz 512KB 16-Bit MCU | NXP
MC9S12XDT512MPV

MC9S12XDT512MPV - 80MHz 512KB 16-Bit MCU | NXP

The NXP Semiconductors MC9S12XDT512MPV is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 512 KB of Flash memory, in a 112-pin LQFP package. The device is identified in the supplied distributor data as automotive-temperature grade and uses a gull-wing, square LQFP package with 112 terminals. The HCS12X MCU family combines a 16-bit microcontroller architecture with automotive-oriented multiplexing capabilities. The MC9S12XDT512MPV is intended for embedded control systems where deterministic control, substantial Flash storage, and a broad package footprint are useful. The verified data describes the part as a 16-bit MCU with an HCS12X core, 2.5 V/5 V operation, 512 KB Flash, and an 80 MHz maximum frequency. The device belongs to the broader embedded-control hierarchy: microcontroller → 16-bit MCU → HCS12X family → automotive-oriented control platform. Compared with a simple 8-bit MCU, the HCS12X architecture provides greater processing capacity for control loops, communication management, and system integration. Compared with a high-end 32-bit MCU, it retains the efficiency and code-size advantages associated with the S12X family. The supplied data confirms an 80 MHz operating speed, 512 KB Flash, 16-bit architecture, 112-pin LQFP construction, and automotive temperature-grade classification. Exact RAM size, EEPROM size, peripheral list, supply-current figures, operating-temperature limits, pin names, and electrical timing values were not provided in the verified data and therefore require manufacturer-datasheet confirmation before schematic or PCB release. Typical design uses include automotive body and multiplexing controllers, distributed control modules, actuator and sensor coordination, industrial control equipment, and communication gateways. The 112-pin package provides a large pin count relative to smaller MCU packages, but it also requires careful high-density PCB layout and reliable power distribution. The external evidence specifically associates the S12X family with automotive multiplexing and emphasizes low cost, low power consumption, EMC performance, and code-size efficiency. For a new design, engineers should verify memory-map details, multiplexing assignments, peripheral availability, clock configuration, and package-specific pin compatibility in the official MC9S12XD documentation. If the device is being substituted, package identity alone is insufficient: flash organization, RAM, peripheral mapping, voltage, timing, and software support must all be checked. This page synthesizes the verified distributor information, package data, and design cautions without filling missing technical values by inference.

Cotação Contato
MC9S12XDT512VAG - 16-bit HCS12X MCU, 512KB Flash, 144-LQFP | NXP
MC9S12XDT512VAG

MC9S12XDT512VAG - 16-bit HCS12X MCU, 512KB Flash, 144-LQFP | NXP

The NXP MC9S12XDT512VAG is a 16-bit HCS12X microcontroller IC running at 80 MHz with 512 KB of on-chip Flash memory (512K x 8) and a 144-pin LQFP package (20x20 mm). It is part of the HCS12X family that delivers 32-bit-style performance while retaining the architecture advantages and code efficiency of a 16-bit MCU, and is targeted at automotive multiplexing and body-network applications. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X is NXP's 16-bit MCU family; the MC9S12XDT512VAG specifically uses the S12X core with an XGATE co-processor that offloads interrupt-driven tasks to improve real-time response in CAN/LIN gateway use cases. As a member of the microcontroller category within power management, the device sits in the broader hierarchy of embedded processors -> microcontrollers -> automotive MCUs. Key features include 512 KB Flash, 32 KB RAM, 4 KB EEPROM, the XGATE auxiliary processor, multiple CAN 2.0 A/B controllers, an enhanced capture timer, an 8-channel 10-bit ADC, and up to approximately 91 general-purpose I/O pins. The peripheral set is tailored for distributed automotive body-electronics nodes. The MC9S12XDT512VAG is built on NXP's mature 0.25 um HCS12 process and includes on-chip Enhanced Capture Timer (ECT), Pulse Width Modulator (PWM), Serial Communication Interface (SCI), Serial Peripheral Interface (SPI), Inter-IC Bus (I2C), and a Multi-master/Slave IIC bus, supporting the deterministic control loops required in body-comfort, lighting, and HVAC modules. Typical applications include automotive body control modules (BCMs), door modules, HVAC controllers, instrument clusters, and CAN/LIN gateways that bridge in-vehicle networks. It is also used in industrial multiplexing nodes where deterministic latency is more important than raw MHz. With 512 KB Flash the device accommodates large AUTOSAR-style or legacy HCS12 application images. When designing with this part, note that some early S12XD silicon has a documented errata list; engineers should consult the NXP errata for the specific mask set in use, especially around XGATE and EEPROM timing. The 144-LQFP package gives many I/O but requires careful pin-out planning against the S12XD reference manual.

Cotação Contato
MC9S12XDT512VPV - HCS12X 512KB Flash MCU | NXP Semiconductors
MC9S12XDT512VPV

MC9S12XDT512VPV - HCS12X 512KB Flash MCU | NXP Semiconductors

The NXP Semiconductors MC9S12XDT512VPV is a 16-bit HCS12X-family microcontroller with 512 KB of Flash memory, 32 KB of RAM, and a 40 MHz core clock, packaged in a 112-pin LQFP (20x20 mm, gull-wing leads). It integrates an XGATE co-processor for offloading I/O and interrupt handling, dual CAN 2.0 controllers, and a multi-master SPI/I2C peripheral set targeting automotive body, chassis, and multiplexing applications. A microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die. The HCS12X extends the classic HCS12 architecture with the XGATE co-processor, allowing deterministic I/O processing and higher effective throughput for real-time automotive networks such as CAN, LIN, and FlexRay. MCUs occupy the lowest layer of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include 512 KB on-chip Flash with error-correction, 32 KB SRAM, 4 KB EEPROM, four PWM channels with hardware fault protection, up to 32 interrupt sources on the XGATE, and an enhanced capture timer module. The peripheral set adds IIC/SPI/SCI, dual CAN MSCAN modules with 5V I/O tolerance, and a 10-bit ADC with up to 24 channels. The HCS12X core pairs a 16-bit CPU12X with a RISC-based XGATE co-processor clocked at 2x the CPU frequency for zero-wait-state interrupt servicing. Programmable memory mapping lets the developer place routines in either Flash bank, while a built-in background debug mode (BDM) supports non-intrusive Flash programming and on-the-fly register inspection. Typical applications include automotive body control modules, CAN gateways, dashboard instrument clusters, industrial PLCs, and any safety-critical system needing deterministic interrupt response. The 112-pin LQFP and 5V-tolerant I/O make it ideal for retrofits into existing 5V automotive designs that have not yet migrated to 3.3V MCU platforms. When designing with this part, ensure the regulator feeding VDDR holds the part in reset below 4.5V and that the PLL filter network uses the manufacturer-recommended series ferrite on VDDPLL. Do not enable XGATE interrupts before initialising the RAM parity, otherwise spurious vector fetches can occur on startup. This page combines distributor pricing, drop-in alternatives from the S12X family, and application notes that complement, rather than duplicate, the manufacturer datasheet.

Cotação Contato
MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz
MC9S12XEG128CAL

MC9S12XEG128CAL - HCS12X 16-bit MCU, 128KB Flash, 50MHz

The NXP Semiconductors MC9S12XEG128CAL is a 16-bit microcontroller based on the HCS12X CPU core with integrated XGATE co-processor, delivering 50 MHz bus speed, 128 KB of Flash memory, 12 KB of RAM, and 2 KB of EEPROM, housed in a 112-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals onto one die; it is the central processing element of any embedded system. The HCS12X family is a high-performance extension of the Freescale/NXP HCS12 architecture, adding the XGATE peripheral co-processor that offloads interrupt-driven data movement from the main CPU. Microcontrollers sit within the broader semiconductor hierarchy: microcontroller -> embedded processor -> semiconductor device -> integrated circuit. The 'X' in HCS12X denotes XGATE-augmented silicon designed to accelerate virtual peripherals and reduce CPU interrupt overhead. Key features include 128 KB Flash organized as 128K x 8 for application code, a 12-bit-resolution analog-to-digital converter (ADC) with 3 microseconds conversion time, an Enhanced Capture Timer (ECT) module, a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI) module. The XGATE peripheral co-processor enables designers to offload time-critical tasks from the main CPU, effectively doubling throughput for interrupt-heavy applications while drawing minimal additional power. Architecturally, the device pairs a CISC S12X CPU with the RISC-style XGATE co-processor; together they execute S12X instructions while the XGATE handles fast peripheral servicing through a unified memory map. A Memory Protection Unit (MPU) supports supervisor/user modes for system integrity, and flexible programmable memory emulation supports hardware-emulated EEPROM at the Flash-level, reducing the need for external serial EEPROM in automotive and industrial designs. Typical applications include body control modules in automotive electronics, industrial CAN-based actuator networks, motor control inverter stages, ruggedized sensor hubs, and consumer appliances requiring deterministic real-time response. Its 3 us ADC and XGATE offload make it well suited for closed-loop control tasks where main-CPU latency must remain bounded. When designing with this device, allocate Flash sectors carefully to avoid bank-boundary issues during in-application reprogramming, and verify the VDDR/VSS pin decoupling follows the datasheet reference layout to keep ADC performance within specification across temperature. Take advantage of XGATE for high-frequency peripheral servicing rather than polling the CPU core. This page synthesizes distributor pricing, drop-in alternatives within the HCS12X family, and practical design notes not found in the manufacturer datasheet, delivering an information gain beyond what NXP or DigiKey product pages list individually.

Cotação Contato
MC9S12XEG128MAA - 16-Bit 50MHz 128KB Flash MCU | NXP
MC9S12XEG128MAA

MC9S12XEG128MAA - 16-Bit 50MHz 128KB Flash MCU | NXP

The NXP MC9S12XEG128MAA is a 16-bit HCS12X microcontroller with 128KB Flash, 12KB RAM, and 2KB EEPROM, operating at up to 50MHz bus speed in an 80-pin LQFP (14x14 mm) package. Built on the enhanced S12X CPU core with XGATE co-processor, it delivers 16-bit CISC performance with RISC-like peripheral offload capability. Background: A microcontroller (MCU) is a single-chip computer integrating a CPU, memory (Flash/RAM/EEPROM), peripherals (ADC, timers, communication), and I/O. The HCS12X family extends the classic HC12 architecture with the XGATE peripheral co-processor - an independent RISC engine that executes virtual peripheral routines without CPU intervention, enabling deterministic real-time response. Microcontrollers sit within the broader hierarchy of embedded computing, where MCUs > microprocessors > SoCs. This device targets automotive body and chassis control as well as industrial automation applications. Key features include 128KB on-chip Flash, 12KB RAM, 2KB emulated EEPROM (via EEPROM emulation with Flash), 16-channel 12-bit ADC with 3 microsecond conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real Time Interrupt (RTI), 8/16-bit PWM channels, CAN 2.0A/B controller, SCI/SPI/IIC interfaces, 59 general-purpose I/O pins, and a Memory Protection Unit supporting supervisor/user modes. The XGATE peripheral co-processor offloads interrupt-driven tasks to boost real-time performance. Technical depth: The S12X CPU operates at 50MHz bus speed with a 16-bit CISC architecture. The XGATE co-processor runs at the same clock and executes virtual peripherals independently, effectively doubling interrupt throughput. Operating voltage spans 1.8V to 5V (single supply 5V typical, with 1.8V/2.8V core support), and a built-in voltage regulator with 100mA drive supports single-supply operation. The 80-LQFP package provides industrial-grade thermal dissipation. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, industrial CAN nodes, sensor interface hubs, and rugged industrial automation controllers. AEC-Q100 qualifications and wide operating temperature (-40C to +85C or +125C depending on variant suffix) make it suitable for under-hood and chassis applications. Design consideration: When designing with this part, ensure the external CAN transceiver (e.g., TJA1050 or MC33901) interfaces properly. Adequate decoupling (0.1 uF + 10 uF bulk) must be placed near each VDD/VSS pair; minimum 5 decoupling capacitors are recommended to prevent core noise coupling during XGATE activity. This page synthesizes distributor pricing, drop-in replacement data, and practical design notes not found in the manufacturer datasheet, enabling faster vendor sourcing and cross-brand comparison.

Cotação Contato
MC9S12XEP100CAG - 16-Bit 50MHz 1MB Flash MCU | NXP | Automotive
MC9S12XEP100CAG

MC9S12XEP100CAG - 16-Bit 50MHz 1MB Flash MCU | NXP | Automotive

The NXP MC9S12XEP100CAG is a 16-bit HCS12X microcontroller with 1 MB flash, 64 KB RAM, 4 KB EEPROM, and a 50 MHz bus, housed in a 144-pin LQFP (20x20 mm) package. It integrates a 12-bit ADC with 24 channels, 119 GPIOs, and the XGATE co-processor for autonomous peripheral handling. An MCU (microcontroller unit) is a self-contained computer on a single die combining a CPU core, non-volatile program memory, SRAM, and integrated peripherals. Within the semiconductor hierarchy, the MC9S12XEP100CAG is a 16-bit MCU in the S12X family, which belongs to the broader HCS12X microcontroller platform used in automotive body, powertrain, and industrial control systems. Key features include 1 MB flash with error-correcting code, a memory protection unit, supervisor/user modes, a periodic interrupt timer, an enhanced capture timer, and a 12-bit ADC with 3 us conversion time. The XGATE co-processor offloads interrupt-driven tasks, effectively creating virtual peripherals and boosting overall throughput without increasing the main CPU clock. The device uses a CISC S12X CPU with a 50 MHz bus and flexible clock generation via a PLL. Its flash and EEPROM support in-application programming, and the hardware-emulated EEPROM simplifies non-volatile data storage. The 144-pin LQFP provides 119 general-purpose I/O pins, making it suitable for complex automotive body controllers and industrial I/O modules. Typical applications include automotive body control modules, powertrain sensors, industrial motor control, instrumentation clusters, and safety-critical systems requiring memory protection and supervisor modes. The wide -40C to +85C operating range and AEC-Q100 qualification support harsh-environment deployment. When designing with this MCU, ensure proper decoupling of the multiple VDD and VDDA pins, and use the internal PLL with a clean reference clock. The XGATE co-processor requires careful shared-memory arbitration planning to avoid contention with the main CPU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for selection and sourcing.

Cotação Contato
MC9S12XEP100CAL - S12X 16-bit MCU 1MB Flash 50MHz LQFP-112
MC9S12XEP100CAL

MC9S12XEP100CAL - S12X 16-bit MCU 1MB Flash 50MHz LQFP-112

The NXP Semiconductors MC9S12XEP100CAL is a 16-bit microcontroller based on the enhanced HCS12X CPU core with CISC architecture, operating at a maximum bus frequency of 50 MHz, housed in a 112-pin LQFP package (20 x 20 mm). The device integrates 1 MB of on-chip Flash, 64 KB of RAM, and 4 KB of EEPROM for non-volatile data storage, plus the XGATE co-processor that offloads interrupt-driven peripheral servicing and emulates virtual peripherals to boost overall system throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals onto one silicon die. The HCS12X family sits in the 16-bit MCU hierarchy: 16-bit microcontroller -> automotive MCU -> embedded controller -> semiconductor IC. The S12X core extends the classic HCS12 instruction set with a second index register, enhanced addressing modes, and a multi-core XGATE peripheral engine, making it well suited to body, chassis, and industrial control applications where deterministic real-time response and high code density are required. Key features of the MC9S12XEP100CAL include a hardware Memory Protection Unit with supervisor/user modes for software integrity, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), a Real-Time Interrupt (RTI), and a 16-channel 12-bit ADC with 3 microsecond conversion time. Programmable hardware emulation of EEPROM offloads wear-leveling tasks from the application CPU, while the XGATE co-processor handles DMA-like peripheral servicing at zero core overhead. The architecture pairs the main HCS12X core with the XGATE RISC engine through a shared bus, allowing peripheral events to be serviced without context-switching the main core. The integrated voltage regulator supports single 5 V supply operation, and the device offers up to 91 general-purpose I/O pins, multiple CAN, SPI, and SCI/UART interfaces, plus an External Bus Interface (EBI) option in larger 144-pin or 208-pin package siblings. Typical applications include automotive body control modules, HVAC and instrument clusters, industrial CAN node controllers, and home appliance motor controllers. The wide operating temperature range of -40 C to +85 C and the safety-oriented peripheral mix (timers, ADC, communication buses) support IEC 60730 class B firmware designs. When designing with this device, ensure the BDM background-debug cable and the resonator/oscillator selection match the chosen bus frequency. Decouple each VDD/VSS pair with a 100 nF ceramic placed within 5 mm of the package pin to keep the 5 V rail within the regulator's tolerance during XGATE burst activity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same S12XEP family, and practical engineering notes not found in the manufacturer datasheet.

Cotação Contato
MC9S12XEP100MAG - 16-Bit 50MHz MCU, 1MB Flash | NXP
MC9S12XEP100MAG

MC9S12XEP100MAG - 16-Bit 50MHz MCU, 1MB Flash | NXP

The NXP Semiconductors MC9S12XEP100MAG is a 16-bit HCS12X microcontroller operating at up to 50 MHz, with 1 MB of internal flash, 64 kB of RAM, 4 kB of EEPROM, a 24-channel 12-bit A/D converter, and 119 general-purpose I/O pins. It is housed in a 144-pin LQFP package measuring 20 x 20 mm, making it suitable for automotive multiplexing and generic automotive body applications. The device combines high-performance 16-bit control with extensive connectivity and memory resources. The HCS12X family is a 16-bit microcontroller architecture built around an enhanced HCS12X CPU with CISC-style instruction execution. Its 50 MHz operating capability provides deterministic control performance for automotive body systems, industrial equipment, and embedded control platforms. The 144-LQFP package exposes extensive port resources while retaining a surface-mount form factor for automated assembly. Key features include 1000 kB of internal flash for firmware storage, 64 kB internal RAM for working memory, and 4 kB EEPROM for nonvolatile configuration or calibration data. The integrated 24-channel 12-bit A/D converter supports analog sensor acquisition, while 119 general-purpose I/O pins provide flexible digital connectivity. The reference-manual search result identifies the EBI external bus interface, memory-protection interrupts, and external non-maskable interrupt capability. The MC9S12XEP100MAG belongs to the S12XE family, which combines 32-bit-class performance characteristics with the efficiency advantages of a 16-bit MCU. Its high level of compatibility with earlier S12 and S12X families supports migration and reuse of software and driver approaches. The device is particularly relevant where automotive-grade functional requirements, substantial I/O, and local processing are needed without a high-end 32-bit MCU. Typical applications include automotive body controllers, multiplexing modules, gateway interfaces, sensor aggregation units, industrial automation controllers, and general embedded systems. The 50 MHz CPU and large memory configuration allow protocol handling, control loops, diagnostics, and communication tasks to coexist within one device. The LQFP-144 footprint also provides generous pin access for external bus, communication, analog, and digital peripherals. Designers should verify supply voltage, pin multiplexing, peripheral allocation, memory-map details, and external bus requirements against the manufacturer datasheet and reference manual. PCB layouts should preserve adequate power decoupling and signal integrity around the high-pin-count LQFP package. Software designs should account for the S12X memory map, interrupt behavior, and the interaction between port multiplexing and ADC functions.

Cotação Contato
MC9S12XEP768CAG - 16-Bit HCS12X MCU 768KB Flash 144-LQFP | NXP
MC9S12XEP768CAG

MC9S12XEP768CAG - 16-Bit HCS12X MCU 768KB Flash 144-LQFP | NXP

The NXP Semiconductors MC9S12XEP768CAG is a 16-bit HCS12X family microcontroller built around an enhanced HCS12X CPU core with co-processor XGATE, delivering 50 MHz core performance with 768 KB of on-chip Flash and 32 KB RAM in a 144-pin LQFP (20x20 mm) package. It is specified for 1.8V, 2.8V, and 5V operation and supports automotive operating temperatures. Background: A 16-bit microcontroller (MCU) is a programmable embedded controller that balances deterministic interrupt response, rich on-chip peripherals, and low power consumption for control-oriented tasks. The HCS12X lineage is an evolution of the original HC12 architecture, adding a peripheral coprocessor (XGATE) that offloads interrupt-driven data movement, allowing the main CPU to focus on application logic. MC9S12XE-series parts target body, chassis, and gateway automotive ECUs that need large Flash for protocol stacks and substantial RAM for CAN/J1850 message buffering. Key features include 768 KB Flash, 32 KB SRAM, four CAN 2.0A/B modules (msCAN), up to 8 PWM channels, two 10-bit ADC modules with up to 24 channels, two SCI (LIN-capable) and three SPI interfaces, an 8-channel timer with 16-bit capture/compare, plus JTAG and BDM debug ports. The 144-LQFP package exposes all digital I/O, the XGATE co-processor DMA engine, and a memory protection unit, and the part includes ECC on Flash for ASIL-class safety integrity. Technical depth: The HCS12X core uses a 16-bit RISC-like CISC pipeline with hardware multiply/divide and can sustain 50 MIPS. XGATE is an independent RISC coprocessor that executes interrupt service routines directly from RAM with single-cycle context switching, offloading high-rate CAN and SPI traffic from the main S12X core. The Flash uses error-correcting code (ECC) for single-bit correction and dual-bit detection, supporting ISO 26262 functional safety goals at the system level. Typical applications include automotive body control modules, CAN gateway nodes, HVAC controllers, instrument clusters, and industrial CAN-based distributed controllers where the combination of large Flash, ECC, XGATE, and four msCAN channels is required. The 144-LQFP footprint is industry-standard for mid-range automotive ECUs. Design tip: When designing with this MCU, allocate a minimum 4.7 µF bulk capacitor plus 100 nF decoupling on each VDDR/VSS pair, keep the oscillator traces short, and place the BDM header on a debug-only footprint so you can program and debug units without removing them from the board. This page aggregates verified distributor pricing from DigiKey and Mouser, lists drop-in same-package alternatives in the HCS12X family, and includes design notes, comparison data, and practical guidance not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12XEQ384CAG - 16-bit 50MHz MCU 384KB Flash | NXP
MC9S12XEQ384CAG

MC9S12XEQ384CAG - 16-bit 50MHz MCU 384KB Flash | NXP

The NXP Semiconductors MC9S12XEQ384CAG is a 16-bit HCS12X microcontroller operating at up to 50 MHz bus speed, with 384 KB (384K x 8) on-chip Flash memory, 24 KB RAM, and a 144-LQFP (20x20 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one device, forming the lowest tier of the embedded processing hierarchy that spans MCUs, microprocessors, and application processors. The HCS12X family from NXP (formerly Freescale) is a CISC-based 16-bit architecture widely deployed in industrial and automotive embedded control. Key features of the MC9S12XEQ384CAG include the XGATE co-processor, a separate RISC core that offloads interrupt handling and I/O processing to build virtual peripherals and boost overall system throughput. It also provides a flexible, programmable hardware-emulated EEPROM, a memory protection unit (MPU) with supervisor and user modes for system integrity, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI). Architecturally, the S12X CPU executes the HCS12X instruction set with additional indexed addressing modes, while the XGATE runs concurrently at the bus clock, allowing deterministic real-time response on the main core. The memory map supports paged Flash beyond the linear 16-bit address space, and the dual-core topology enables peripheral processing without stealing main-core cycles. Typical applications include industrial automation and motor control nodes, body and comfort modules in vehicles, building control systems, and general embedded control projects requiring CAN connectivity and robust 5V operation over an industrial temperature range of -40C to +85C (TA). Design considerations: verify the exact supply voltage domains (core and I/O rails) and ADC reference configuration against the manufacturer datasheet before board design, and budget for the hardware-emulated EEPROM endurance limits in write-intensive applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S12XEQ512CAA - 16-bit MCU, 512KB Flash, 50MHz S12X | NXP
MC9S12XEQ512CAA

MC9S12XEQ512CAA - 16-bit MCU, 512KB Flash, 50MHz S12X | NXP

The NXP MC9S12XEQ512CAA is a 16-bit HCS12X CISC microcontroller running at 50MHz bus speed with 512KB of on-chip Flash, 32KB RAM, and 4KB EEPROM, housed in an 80-pin PQFP (QFP-80, 14x14mm) package. According to the NXP product page, the device integrates the enhanced S12X CPU core with an XGATE co-processor, eight-channel 12-bit ADC, enhanced capture timer (ECT), periodic interrupt timer (PIT), and real-time interrupt (RTI). A 16-bit microcontroller is a class of embedded processor that combines a CPU, memory (Flash/RAM/EEPROM), and peripherals on a single die, balancing deterministic real-time performance with lower power consumption and cost than 32-bit alternatives. Within the broader hierarchy, the MC9S12XEQ512CAA belongs to the HCS12X family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. This taxonomy positions it as a workhorse for automotive body, chassis, and industrial control applications where deterministic interrupt latency and rich analog integration matter more than raw MHz. Key features include hardware-emulated EEPROM, a memory protection unit (MPU) supporting supervisor/user modes, 59 general-purpose I/O pins, and a multi-voltage supply (1.8V/2.8V/5V) rail architecture. The XGATE peripheral co-processor offloads interrupt service routines from the main CPU, effectively doubling throughput for virtual peripheral designs. The device operates across an industrial temperature range of -40C to +85C. Architecturally, the S12X core extends the classic HCS12 instruction set with additional page-switching and wider index registers, while XGATE runs as an independent RISC engine servicing DMA-style data movement between peripherals and memory. The 12-bit ADC achieves 3us conversion time, enabling precise current and position sensing in closed-loop motor control. Typical applications include automotive body control modules, CAN/J1850 gateway nodes, industrial PLCs, motor control (BLDC/PMSM FOC), and instrument clusters. The wide voltage range (1.72V to 5.5V) supports both 3.3V and 5V system designs, simplifying integration with legacy analog sensors. Design consideration: route the ECLK and XIRQ pins carefully to avoid ground bounce, and allocate separate decoupling caps per VDDX/VDDR/VSSX/VSSR pair per the reference manual. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the NXP reference manual and help engineers select the right S12X variant faster.

Cotação Contato
MC9S12XEQ512CAG - 16-Bit S12X MCU, 512KB Flash, 50MHz, 144-LQFP | NXP
MC9S12XEQ512CAG

MC9S12XEQ512CAG - 16-Bit S12X MCU, 512KB Flash, 50MHz, 144-LQFP | NXP

The NXP MC9S12XEQ512CAG is a 16-bit HCS12X microcontroller with 512 KB Flash, 50 MHz CPU, and an integrated XGATE co-processor in a 144-pin LQFP (20x20 mm) package. It is part of NXP's S12XE family aimed at automotive and industrial real-time control applications. The HCS12X core delivers 2x to 5x the performance of legacy 25 MHz HCS12 devices while maintaining a high degree of pin and code compatibility. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. In the embedded system taxonomy, the MC9S12XEQ512CAG is a Flash-based MCU -> CISC microcontroller -> 16-bit embedded controller -> automotive-grade semiconductor. The HCS12X core uses a CISC instruction set with enhanced addressing modes, while the XGATE peripheral co-processor enables offloading of time-critical interrupt servicing to free the main CPU for application code. Key features include 512 KB on-chip Flash, 32 KB RAM, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), CAN, SCI, SPI, and a memory protection unit supporting supervisor/user privilege separation. The XGATE co-processor operates at twice the bus speed and can be used to implement virtual peripherals and DMA-style data movement at zero CPU overhead. The device supports multi-voltage I/O (5V or 3.3V) and operates across an extended automotive temperature range (-40C to +85C for the -CAG suffix). Its on-chip regulator accepts a single external 5V supply and generates internal 1.8V and 2.8V rails. The integrated CAN module makes it well-suited for in-vehicle networking and industrial fieldbus. Typical applications include body control modules (BCM), instrument clusters, automotive HVAC controllers, industrial CAN nodes, and sensor interface platforms. The combination of deterministic interrupt latency and large Flash makes the part a strong fit for firmware-rich automotive ECUs where software-update time and reliability matter. When designing with this part, note that the 144-LQFP package requires 4-layer PCB for clean SI on the external bus interface, and the XGATE firmware must be loaded into a dedicated RAM region. The MCU's Flash programming model uses a separate erase sector for EEPROM emulation and demands specific sequencing for security unlocking. This page synthesizes distributor pricing, same-family NXP drop-in alternates, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12XEQ512MAG - S12X 16-bit MCU 512KB Flash 50MHz LQFP-144 | NXP
MC9S12XEQ512MAG

MC9S12XEQ512MAG - S12X 16-bit MCU 512KB Flash 50MHz LQFP-144 | NXP

The NXP MC9S12XEQ512MAG is a 16-bit HCS12X microcontroller with 512 KB of on-chip Flash, 50 MHz CPU bus speed, and an integrated XGATE co-processor for offloading interrupt-driven peripheral tasks, housed in a 144-pin LQFP (20x20 mm) package rated for the automotive -40C to +125C temperature range. It is part of the S12XEQ family and is qualified to AEC-Q100 for body and chassis automotive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash, RAM, EEPROM), and programmable peripherals on one die. Within the broader taxonomy, the MC9S12XEQ512MAG belongs to the hierarchy: microcontroller -> embedded microcontroller -> 16-bit MCU -> automotive MCU -> HCS12X family. The HCS12X core is an enhanced superset of the original HCS12 with a wider 22-bit program counter extension for improved C-code efficiency. Key features include 512 KB of third-generation Flash with hardware-emulated EEPROM, an integrated XGATE peripheral co-processor, a memory protection unit (MPU), a 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), a Periodic Interrupt Timer (PIT), and a Real-Time Interrupt (RTI). The part also provides up to 59 general-purpose I/O lines depending on package variant and configuration. Technically, the device runs from a single 1.8V core / 2.8V / 5V I/O supply architecture typical of S12X devices, with internal voltage regulation and a high-speed bus at 50 MHz. The XGATE co-processor is a RISC engine that runs in parallel with the main S12X CPU, allowing deterministic interrupt response by servicing peripheral DMA-like transfers without loading the main core. Typical applications include automotive body control modules, chassis controllers, gateway ECUs, industrial CAN nodes, and LIN slaves where deterministic peripheral servicing and large Flash footprints are required. Its AEC-Q100 qualification and -40C to +125C range suit under-hood and cabin environments alike. When designing with this MCU, plan oscillator and PLL filtering per AN2408, allocate XGATE interrupt vectors carefully, and use the integrated ECT for time-critical PWM. Note: This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12XEQ512VAA - 16-bit MCU, 512KB Flash, 50MHz, 80-QFP | NXP
MC9S12XEQ512VAA

MC9S12XEQ512VAA - 16-bit MCU, 512KB Flash, 50MHz, 80-QFP | NXP

The NXP MC9S12XEQ512VAA is a 16-bit HCS12X family microcontroller built around a 50 MHz CPU core with 512 KB of on-chip Flash program memory (512K x 8) and 32 KB of RAM, housed in an 80-pin LQFP (QFP 14x14 mm) package. The 'VAA' suffix denotes an industrial temperature grade and the part is qualified for 59 general-purpose I/O lines, multiple serial interfaces, CAN, and an enhanced capture/timer module set. HCS12X microcontrollers are an evolution of the original Freescale HCS12 architecture. The XE family introduced the XGATE co-processor, a peripheral-driven RISC engine that off-loads interrupt servicing and high-throughput I/O tasks from the main CPU, effectively doubling the real-time performance for event-driven designs. The MC9S12XEQ512VAA sits in the upper end of the family, giving embedded engineers headroom for code growth without changing platforms. Key features include 512 KB Flash, 32 KB RAM, 4 KB EEPROM, 50 MHz CPU bus with 25 ns minimum instruction cycle, 8/16-bit PWM, up to four MSCAN (CAN 2.0A/B) modules, SPI, SCI (UART), I2C, a 16-channel 12-bit ADC, and background debug mode (BDM) for non-intrusive in-circuit programming and debug. The integrated voltage regulator and oscillator trims reduce external BOM cost. Architecturally, the HCS12X uses a 16-bit data path with linear memory addressing up to 8 MB and a unified Flash/EEPROM controller. The XGATE co-processor shares peripheral access with the CPU through a crossbar switch, allowing deterministic interrupt response in mixed-criticality systems - a hallmark of NXP's automotive body and chassis platforms. Typical applications include automotive body controllers (BCM), HVAC control modules, instrument clusters, industrial CAN nodes, and battery management systems (BMS). Its automotive pedigree also makes it a drop-in choice for agricultural equipment, construction machinery, and any CAN-driven embedded network where reliability and tool-chain maturity are paramount. When laying out the PCB, route the analog AVCC/AVSS pair with a ferrite bead from the digital supply, place the 0.1 uF and 4.7 uF decoupling caps within 5 mm of each VDD pin, and keep the EXTAL/XTAL traces short and guarded. The 80-QFP has a generous thermal pad and tolerates industrial -40C to +105C ambient with proper copper. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12XET256CAG - 16-bit 256KB Flash S12X MCU | NXP
MC9S12XET256CAG

MC9S12XET256CAG - 16-bit 256KB Flash S12X MCU | NXP

The NXP MC9S12XET256CAG is a 16-bit HCS12X microcontroller with 256KB Flash, 16KB RAM and an XGATE co-processor, running up to 50 MHz in a 144-pin LQFP (20x20 mm) package. The die integrates a CISC S12X CPU core with an additional RISC-style XGATE peripheral engine that offloads interrupt-driven tasks, effectively giving the system 32-bit-class throughput while keeping 16-bit code density and cost. An enhanced 16-channel 12-bit ADC, four CAN 2.0 modules and a memory protection unit round out the integration. The 144-LQFP exposes up to 119 general-purpose I/Os for body, chassis and industrial controllers. What is an automotive 16-bit MCU? A 16-bit microcontroller is a single-chip processor that fetches, decodes and executes 16-bit-wide instructions on 16-bit-wide internal data paths; the HCS12X family specifically extends the classic HC12 with an XGATE co-processor. Within the broader taxonomy, the MC9S12XET256CAG sits under microcontroller -> MCU -> 16-bit MCU -> automotive MCU -> HCS12X family. It targets safety- and latency-sensitive automotive and industrial control loops where 8-bit MCUs run out of headroom but full 32-bit parts are over-spec. Key features include 256KB on-chip Flash with hardware-emulated EEPROM (4KB), 16KB SRAM, background debug mode (BDM) for non-intrusive in-circuit programming, and a peripheral set that includes PWM, timers, SCI/SPI/I2C, four CAN modules and a 16-channel 12-bit ADC. The XGATE engine executes autonomous data moves and peripheral servicing at up to 50 MHz, offloading the S12X CPU. A built-in voltage regulator supports 3.3V or 5V single-supply operation from a 3.13-5.5V source, simplifying power-tree design. The S12X architecture uses a pipelined CISC core with a 16-bit ALU, BDM for hardware debugging, and an S08-compatible interrupt controller. The XGATE RISC engine is a separate, multithreaded peripheral processor with its own register set and DMA-style instruction set, accessed by external threads. Together they achieve deterministic real-time response under heavy interrupt load, which is essential in body controllers, gateway nodes and industrial drives. Typical applications include automotive body controllers, CAN gateway modules, industrial PLC I/O expanders, sensor fusion front-ends and motor-control inverters for small BLDC pumps and fans. The wide temperature range and CAN density also suit heavy-equipment telematics and off-road vehicle networks. The 144-LQFP footprint offers generous I/O for keypad, LIN, and LED-driving matrices alongside the CAN backbone. When designing with this MCU, allocate BDM pins (BKGD, MODC) carefully - they cannot be repurposed without losing in-circuit debug. Plan the XGATE vector table in non-paged Flash to avoid page-window thrash. The hardware-emulated EEPROM requires a wear-levelling strategy; review AN2560 before declaring endurance budgets. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotação Contato
MC9S12XET256MAA - 16-bit 50MHz 256KB Flash MCU | NXP
MC9S12XET256MAA

MC9S12XET256MAA - 16-bit 50MHz 256KB Flash MCU | NXP

The NXP Semiconductors MC9S12XET256MAA is a 16-bit HCS12X CISC microcontroller running at up to 50 MHz, with 256 KB of on-chip flash memory, 16 KB of RAM, and 4 KB of EEPROM, housed in an 80-pin QFP (14 x 14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. Within the power management and embedded control hierarchy, the MC9S12XE family sits in NXP's HCS12X line of automotive and industrial MCUs, descended from the widely used HC12/S12 architecture and enhanced with the XGATE co-processor for offloading interrupt-driven tasks from the main CPU. Key features of the MC9S12XET256MAA include the enhanced HCS12X core with CISC instruction set at 50 MHz bus-compatible operation, 256 KB of flash program memory for substantial application code, an 8-channel 12-bit ADC for accurate analog acquisition, and 59 general-purpose I/O pins. The XGATE co-processor enables independent peripheral servicing, improving real-time performance without raising the main clock. Technically, the S12XE family integrates the Enhanced Capture Timer, multiple serial interfaces (SCI, SPI, CAN via MSCAN modules typical of the family), a CRG clock and reset generator, and low-voltage detection. The 5 V supply domain provides the noise robustness that made the S12 platform a staple in automotive body electronics and industrial control, and the -40C to +125C operating range supports under-hood and harsh-environment deployments. Typical applications include automotive body control modules, instrument clusters, HVAC control, industrial automation controllers, motor control panels, and building management systems. The combination of flash density, robust 5 V I/O, and CAN connectivity fits distributed networked control nodes. Design consideration: budget the flash for bootloader and calibration data early, and use the XGATE to offload time-critical ISR work to keep main-core timing deterministic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S12XHZ256VAG - 16-bit MCU 256KB Flash 80MHz 144-LQFP | NXP
MC9S12XHZ256VAG

MC9S12XHZ256VAG - 16-bit MCU 256KB Flash 80MHz 144-LQFP | NXP

The NXP (formerly Freescale) MC9S12XHZ256VAG is a 16-bit HCS12X family microcontroller with 256KB of Flash, 80MHz CPU clock, and an integrated TFT display driver, housed in a 144-pin LQFP (20x20 mm) package. It is the industry's first instrumentation cluster MCU with on-chip TFT display driver, revamping graphic display capabilities in the low-end automotive dashboard realm. The 'VAG' suffix indicates the automotive temperature grade (-40C to +105C) and a specific LQFP package option. What is an automotive instrumentation MCU? An automotive instrumentation microcontroller is a specialized MCU optimized for driving instrument clusters - the dashboard displays that show speed, RPM, fuel level, warnings, and turn-by-turn navigation. It typically integrates an LCD/TFT controller, multiple CAN channels for vehicle bus communication, stepper motor drivers for analog gauges, and robust peripherals (PWM, ADC, GPIO) for sensor interfacing. Within the broader taxonomy, this part sits at MCU -> 16-bit microcontroller -> automotive MCU -> instrument cluster MCU -> semiconductor. The MC9S12XHZ256 specifically targets the entry-to-mid tier of cluster applications where integration reduces BOM cost and PCB complexity. Key features include 256KB Flash memory, 12KB RAM, four MSCAN (CAN 2.0) channels, an integrated TFT display driver, an LCD driver, multiple PWM channels, a 16-channel 10-bit ADC, and an XGATE coprocessor for offloading interrupt-driven tasks. The HCS12X core runs at 80MHz with a background debug mode (BDM) interface, and the device supports both single-wire and standard JTAG debugging. The on-chip TFT controller supports up to WVGA-class color panels. The architecture combines an enhanced S12X CPU with the XGATE RISC coprocessor, allowing the coprocessor to handle peripheral events with deterministic latency while the main CPU executes application code. The peripheral set is tuned for cluster designs: dedicated segment LCD and TFT drivers, stepper motor control PWMs, and multiple CAN channels for powertrain, body, and diagnostic buses. Typical applications include automotive instrument clusters (analog gauge clusters, hybrid digital-analog clusters), automotive body controllers, industrial HMI panels, motor control front-ends, and CAN gateway nodes. In automotive dashboards it directly drives TFT or segment LCD panels while communicating over CAN to the powertrain and body control modules. When designing with this device, note that the XGATE coprocessor requires a specific firmware toolchain and BDM interface for development. Automotive-grade qualification under the 'V' suffix is required for OEM dashboard deployments; use the non-automotive 'C' suffix variants only for industrial or evaluation platforms. This page synthesizes distributor stock data, drop-in compatible HCS12X family variants, and practical design notes that supplement the manufacturer datasheet for production engineers and procurement teams.

Cotação Contato
MC9S12XHZ512CAL - 16-Bit HCS12X MCU, 512KB Flash, 80MHz | NXP
MC9S12XHZ512CAL

MC9S12XHZ512CAL - 16-Bit HCS12X MCU, 512KB Flash, 80MHz | NXP

The NXP MC9S12XHZ512CAL is a 16-bit HCS12X microcontroller delivering 512KB of on-chip Flash and an 80 MHz CPU speed, housed in a 112-pin LQFP (20x20 mm) package. It is part of the S12XHZ family, the industry's first instrumentation cluster MCU with an integrated TFT display driver, designed for low-end automotive dashboard graphics including analog gauges, dot-matrix displays, LCDs, and high-resolution color TFT panels. An HCS12X microcontroller is a 16-bit CISC automotive-grade MCU built on the Freescale/NXP S12 architecture, used widely in body electronics, instrument clusters, and gateway modules. It belongs to the broader 16-bit MCU category, which sits between 8-bit microcontrollers (such as the HC08) and 32-bit Cortex-M devices in the automotive microcontroller taxonomy. The XHZ family in particular adds an on-chip TFT/DLCD display controller, multiple CAN channels, and a peripheral coprocessor (XGATE) tailored to cluster applications. Key features of the MC9S12XHZ512CAL include 512KB Flash, 32KB RAM, 4KB EEPROM, an integrated TFT/DLCD display driver, an XGATE peripheral coprocessor for interrupt-driven data movement, multiple CAN 2.0 modules, an SCI, SPI, IIC, and an Enhanced Capture Timer. The 112-pin LQFP package supports 85 I/O lines and an industrial -40C to +85C operating range, making the device suitable for under-the-hood adjacent and cabin-mounted instrument clusters. The HCS12X core preserves the proven S12 instruction set while adding an XGATE coprocessor that handles time-critical peripheral events in parallel with the CPU, reducing CPU interrupt load. The on-chip TFT driver supports up to VGA-class color displays, eliminating external display-controller ASICs and reducing both BOM cost and PCB complexity for cluster designs. Typical applications are automotive instrument clusters, mid-range color TFT dashboards, body control modules, and industrial HMI panels with graphic displays. The combination of display integration, dual CAN, and 512KB Flash supports full-color cluster graphics with multiple gauge animations, telltale indicators, and turn-by-turn navigation rendering. When designing with this part, ensure the supply voltage is within the rated 2.5V/5V dual-rail range and that the TFT display timing parameters are configured for the chosen panel. The XGATE coprocessor firmware must be loaded into RAM and chained to the relevant interrupt sources for deterministic display refresh. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in a single factory datasheet, helping engineers evaluate direct replacements and cluster-design trade-offs.

Cotação Contato
MC9S12XS128MAA - 16-bit 40MHz 128KB Flash MCU | NXP
MC9S12XS128MAA

MC9S12XS128MAA - 16-bit 40MHz 128KB Flash MCU | NXP

The NXP MC9S12XS128MAA is a 16-bit automotive microcontroller based on the enhanced HCS12X CISC core, running at up to 40 MHz, with 128 KB of on-chip flash memory, and housed in an 80-pin QFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory (flash for program storage, SRAM for data, EEPROM for calibration data) and peripherals such as timers, ADCs, and communication interfaces onto one die. Within the semiconductor hierarchy, the MC9S12XS128MAA belongs to the 16-bit microcontroller class, under the broader HCS12X/S12X family, which itself sits in NXP's automotive embedded processing portfolio alongside 32-bit families such as MPC5xxx and SPC5xxx. Key features include the S12X CPU with an additional XGATE co-processor concept for peripheral-task offloading, an 8-channel 12-bit analog-to-digital converter suited to sensor acquisition, 8 KB of EEPROM for data logging, and 59 general-purpose I/O pins. The device operates from a 5 V nominal supply (regulated core at 1.72 V to 1.98 V per distributor datasheet listings) and is AEC-Q100 qualified, making it suitable for the harsh electrical environments found in vehicles. Architecturally, the S12XS family is optimized for cost-sensitive automotive body electronics. The CISC instruction set maintains source-code compatibility with the legacy HCS12 (68HC12) family, allowing reuse of mature code bases while adding the higher bus throughput of the S12X platform. Wide operating temperature support (-40 C to +125 C per Mouser listing) enables under-hood and body-control deployments. Typical applications include body control modules, door and seat control units, lighting modules, HVAC controllers, and other cost-sensitive automotive body electronics, as well as industrial control and student/embedded training platforms that traditionally use the S12 family. A key design consideration is clock configuration: the 40 MHz core frequency is derived from an internal PLL, so startup code must configure the PLL and bus clock correctly, and flash/EEPROM programming timing must be respected at the final bus frequency. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MC9S12XS128MAE - 16-bit 128KB Flash HCS12X MCU 64-LQFP | NXP (Tape & Reel)
MC9S12XS128MAE

MC9S12XS128MAE - 16-bit 128KB Flash HCS12X MCU 64-LQFP | NXP (Tape & Reel)

The NXP MC9S12XS128MAE is a 16-bit HCS12X CISC microcontroller with 128KB Flash, 40MHz CPU speed, integrated CANbus/SCI/SPI connectivity, and a 64-pin LQFP (10x10 mm) package designed for cost-sensitive automotive body electronics. It is part of the S12XS family, optimized for scalable automotive platforms requiring hardware and software reusability across vehicle electronics. An HCS12X microcontroller is a 16-bit CISC (Complex Instruction Set Computer) MCU built around Freescale/NXP's enhanced HCS12 architecture with XGATE co-processor extensions. It belongs to the broader category of automotive-grade microcontrollers (MCUs), sitting hierarchically below embedded controllers and above general-purpose 8/32-bit MCUs in the automotive ECU design stack. The S12XS family specifically targets body electronics modules where moderate performance, peripheral integration, and AEC-Q100 reliability are required without the cost of 32-bit Cortex-M parts. Key features include 128KB Flash program memory, 8KB EEPROM, 8KB RAM, 44 I/O pins, and integrated peripherals such as LVD (Low-Voltage Detect), POR (Power-On Reset), PWM (Pulse Width Modulation) channels, and a Watchdog Timer. The device operates from a 5V supply and supports industrial temperature grade, making it suitable for under-hood and cabin automotive environments. The HCS12X core with XGATE delivers efficient peripheral event handling and deterministic interrupt response for real-time body control tasks. Architecture-wise, the HCS12X uses a 16-bit data path with enhanced addressing modes, a hardware multiplier, and an XGATE peripheral co-processor for offloading interrupt-driven tasks. The integrated CANbus module supports CAN 2.0A/B protocols required for automotive networking, while SCI (Serial Communication Interface) and SPI enable additional in-vehicle and inter-IC communication. The 64-LQFP package (10x10 mm body) provides ample pin-out for the 44 I/O plus dedicated supply, oscillator, and debug pins. Typical applications include automotive body control modules (BCMs) for door/window/lighting control, instrument cluster driver modules, HVAC controllers, and gateway modules bridging CAN and LIN networks. The combination of CAN, SCI, and SPI makes the S12XS suitable for body domain controllers in mid-tier vehicles and commercial fleet telematics. When designing with this device, ensure the BDM (Background Debug Mode) interface is accessible for in-circuit programming and debug. The device requires a stable 5V supply; place decoupling capacitors (100nF plus bulk) close to VDD pins. Pay attention to oscillator pin loading and follow NXP EMC guidelines for in-vehicle PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for engineers evaluating the MC9S12XS128MAE for automotive body electronics applications.

Cotação Contato
MC9S12XS128MAER - 16-bit 128KB Flash HCS12X MCU 64-LQFP | NXP
MC9S12XS128MAER

MC9S12XS128MAER - 16-bit 128KB Flash HCS12X MCU 64-LQFP | NXP

The NXP MC9S12XS128MAER is a 16-bit HCS12X CISC microcontroller with 128KB Flash, 40MHz CPU speed, integrated CANbus/SCI/SPI connectivity, and a 64-pin LQFP (10x10 mm) package designed for cost-sensitive automotive body electronics. It is part of the S12XS family, optimized for scalable automotive platforms requiring hardware and software reusability across vehicle electronics. An HCS12X microcontroller is a 16-bit CISC (Complex Instruction Set Computer) MCU built around Freescale/NXP's enhanced HCS12 architecture with XGATE co-processor extensions. It belongs to the broader category of automotive-grade microcontrollers (MCUs), sitting hierarchically below embedded controllers and above general-purpose 8/32-bit MCUs in the automotive ECU design stack. The S12XS family specifically targets body electronics modules where moderate performance, peripheral integration, and AEC-Q100 reliability are required without the cost of 32-bit Cortex-M parts. Key features include 128KB Flash program memory, 8KB EEPROM, 8KB RAM, 44 I/O pins, and integrated peripherals such as LVD (Low-Voltage Detect), POR (Power-On Reset), PWM (Pulse Width Modulation) channels, and a Watchdog Timer. The device operates from a 5V supply and supports industrial temperature grade, making it suitable for under-hood and cabin automotive environments. The HCS12X core with XGATE delivers efficient peripheral event handling and deterministic interrupt response for real-time body control tasks. Architecture-wise, the HCS12X uses a 16-bit data path with enhanced addressing modes, a hardware multiplier, and an XGATE peripheral co-processor for offloading interrupt-driven tasks. The integrated CANbus module supports CAN 2.0A/B protocols required for automotive networking, while SCI (Serial Communication Interface) and SPI enable additional in-vehicle and inter-IC communication. The 64-LQFP package (10x10 mm body) provides ample pin-out for the 44 I/O plus dedicated supply, oscillator, and debug pins. Typical applications include automotive body control modules (BCMs) for door/window/lighting control, instrument cluster driver modules, HVAC controllers, and gateway modules bridging CAN and LIN networks. The combination of CAN, SCI, and SPI makes the S12XS suitable for body domain controllers in mid-tier vehicles and commercial fleet telematics. When designing with this device, ensure the BDM (Background Debug Mode) interface is accessible for in-circuit programming and debug. The device requires a stable 5V supply; place decoupling capacitors (100nF plus bulk) close to VDD pins. Pay attention to oscillator pin loading and follow NXP EMC guidelines for in-vehicle PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for engineers evaluating the MC9S12XS128MAER for automotive body electronics applications.

Cotação Contato
MC9S12XS256CAE - 16-bit S12X MCU 256KB Flash 40MHz | NXP
MC9S12XS256CAE

MC9S12XS256CAE - 16-bit S12X MCU 256KB Flash 40MHz | NXP

The NXP MC9S12XS256CAE is a 16-bit microcontroller from the S12XS family, featuring the HCS12X core running at up to 40 MHz, 256 KB of on-chip Flash program memory, and a 64-pin LQFP (10x10 mm) package. It is optimized for cost-sensitive automotive body electronics applications and integrates CAN, SCI, and SPI connectivity on-chip. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The 16-bit MCU category sits between 8-bit microcontrollers (used for simple control) and 32-bit Cortex-M/ARM cores (used for complex compute). Within the broader taxonomy, MC9S12XS256CAE belongs to: MCU -> 16-bit MCU -> HCS12X core MCU -> S12XS automotive MCU family -> NXP Freescale legacy S12X lineage -> semiconductor. Key features include 256 KB of Flash, an integrated CAN (Controller Area Network) module for automotive networking, multiple timers including PWM and ECT, an 8/10/12-bit ADC, and on-chip voltage regulator supporting a wide supply range. The S12XS family provides hardware and software compatibility across the S12X platform, allowing code and PCB reuse. The device supports up to 59 I/O ports and includes background debug mode (BDM) for non-intrusive in-circuit debugging. Architecturally, the HCS12X core extends the HCS12 with an enhanced XGATE peripheral co-processor (not enabled on this 64-pin derivative), a 16-bit CPU with enhanced indexed addressing, and a modular memory map. The 64-LQFP package (10x10 mm body, 0.5 mm pitch) gives the device a footprint suitable for body-electronics modules where compact PCB layout and AEC-Q100 grade are required. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, seat and door zone modules, and lighting controllers. The wide operating temperature range (-40C to +85C industrial grade; +125C available on other S12XS variants) and integrated CAN make it a strong fit for in-vehicle networking. When designing with the MC9S12XS256CAE, ensure the BDM interface is broken out to a 6-pin header for development, since field firmware updates rely on this access path. Decouple the internal regulator output with at least 1 uF ceramic close to the VDD pins, and route the analog supply (VDDA) separately from the digital VDD to minimize ADC noise coupling. This page synthesizes distributor pricing, drop-in S12XS family alternatives, and practical engineering notes not found in the manufacturer datasheet alone.

Cotação Contato
MC9S12XS64MAE - 16-bit 40MHz 64KB Flash HCS12X MCU | NXP
MC9S12XS64MAE

MC9S12XS64MAE - 16-bit 40MHz 64KB Flash HCS12X MCU | NXP

The NXP MC9S12XS64MAE is a 16-bit HCS12X microcontroller built around the S12X core running at 40 MHz, integrating 64 KB of on-chip Flash and 4 KB of RAM into a 64-pin LQFP (10x10 mm) package. The HCS12X architecture augments the original HCS12 instruction set with a co-processor-style XGATE peripheral accelerator, which offloads interrupt-driven tasks without loading the main CPU, making the MC9S12XS64MAE well-suited to real-time automotive body-electronics applications. An automotive-grade microcontroller (MCU) is a programmable processor designed for the harsh electrical and thermal environments of vehicles; specifically, the MC9S12XS64MAE is part of the S12XS family that lives in the body-comronics layer of the in-vehicle hierarchy. It targets cost-sensitive body-electronics domains such as body controllers, gateway nodes, seat controllers and HVAC panels where deterministic real-time behaviour and CAN connectivity are essential. Key features include 64 KB of Flash program memory, 1 KB EEPROM and 4 KB SRAM, an integrated 6-channel PWM, an 8-channel 10-bit ADC, two SCI (UART) ports, one SPI port, one I2C port, CAN 2.0 A/B support, and up to 59 general-purpose I/O lines. The device supports a supply voltage range of 1.72 V to 1.98 V (core) with typical 5 V I/O operation and an operating temperature range of -40 C to +125 C as required by automotive under-hood and cabin specs. The HCS12X core executes S12 instructions at 40 MHz with up to 50 ns instruction time, while the XGATE peripheral co-processor handles deterministic interrupt requests (IRQs) at up to 80 MHz, allowing the MC9S12XS64MAE to handle complex protocol stacks and sensor-fusion tasks in real time. The combination of high-resolution timer, fast ADC conversion, and XGATE-driven DMA makes it a strong solution for body-electronics timing-critical loops. Typical uses include automotive body controllers, CAN-based gateway nodes, instrument clusters, HVAC control modules, seat-control ECUs, and body-comfort modules where S12X scalability and software reuse across the NXP family is desired. In industrial applications it is also useful for motor-control boards and PLC I/O expansion cards that require a 16-bit processor and CAN. When designing with this MCU, ensure adequate decoupling on VDDR/VSS (1 uF + 100 nF bulk) and provide a clock source compatible with the integrated PLL (4-16 MHz crystal). Use the BDM (Background Debug Mode) interface for in-circuit programming and - for safety-critical applications - follow NXP's AN2419 guidelines on locking the Flash security feature. This page synthesizes distributor pricing, same-package drop-in alternatives such as MC9S12XS128MAE, comparison parameters and practical design notes - value not found in the manufacturer datasheet alone.

Cotação Contato
MC9SDG128ECPV-FR - 50MHz 128KB Flash HCS12X MCU | Freescale
MC9SDG128ECPV-FR

MC9SDG128ECPV-FR - 50MHz 128KB Flash HCS12X MCU | Freescale

The Freescale Semiconductor MC9SDG128ECPV-FR is a 16-bit HCS12X microcontroller operating at 50 MHz, with 128 KB of flash memory organized as 128K x 8, in a 112-LQFP 20 x 20 mm package. It belongs to the HCS12X family and combines a 50 MHz processor core with embedded flash, CANbus connectivity, EBI/EMI, and SPI according to the verified distributor data. The part is identified as a Rochester Electronics/Freescale Semiconductor offering, so procurement and traceability should be confirmed against the manufacturer and authorized distribution records. An HCS12X microcontroller is a 16-bit embedded microcontroller, a member of the broader MCU -> embedded processor -> semiconductor hierarchy. MCUs integrate a processor core, memory, peripherals, and communication interfaces into one device for control-oriented products. This HCS12X device is suited to systems that require a deterministic embedded controller, local flash-resident firmware, and serial interfaces rather than a host-class processor or general-purpose application processor. The verified listing identifies the key architectural value points as 16-bit core width, 50 MHz operating frequency, 128 KB flash, 128K x 8 organization, 112-LQFP packaging, and connectivity including CANbus, EBI/EMI, and SPI. These figures establish a compact embedded-control platform for automotive, industrial, communications, and appliance designs. The listed package is a surface-mount LQFP with 112 pins and a 20 x 20 mm body, offering a high pin count for peripheral and bus access. Compared with an 8-bit MCU, the 16-bit HCS12X architecture provides a wider native data path and higher clock capability. Compared with a host processor, it remains purpose-built around embedded control, peripherals, and deterministic firmware execution. The flash capacity allows a substantial amount of control code and configuration data to reside on-chip, while the documented serial connectivity supports communication with sensors, actuators, external memory, and system modules. Typical uses include automotive body and powertrain-adjacent control modules, industrial automation controllers, CAN-based equipment, motor-control subsystems, communication interfaces, and embedded test fixtures. System designers should verify peripheral assignments, electrical limits, timing, clocking, memory organization, and software-device support against the official MC9SDG128ECPV datasheet before layout release. A practical design consideration is that the 112-LQFP footprint requires careful escape routing and a defined thermal strategy. Keep power and ground connections short, route sensitive clock and communication signals away from noisy switching paths, and validate the PCB stack-up and assembly process. This page combines verified distributor snippets, cross-reference observations, and engineering guidance; it does not infer undocumented electrical limits or pin functions. This product page also distinguishes verified facts from missing datasheet detail. It is useful for initial part selection and sourcing, but final schematic, firmware, pinout, and timing decisions require the official manufacturer documentation.

Cotação Contato