Microcontroladores

Produtos (20.000+)

MPC8540PX833LC - PowerQUICC III 833MHz Host Processor | NXP
MPC8540PX833LC

MPC8540PX833LC - PowerQUICC III 833MHz Host Processor | NXP

The NXP MPC8540PX833LC is a PowerQUICC III integrated host processor combining a PowerPC e500 core running at 833 MHz with system logic for networking, telecommunications, and wireless infrastructure. Housed in a 783-ball FCBGA (29x29 mm) package, it integrates a 32-bit RISC superscalar processor core, DDR memory controller, PCI/PCI-X controller, and multiple Ethernet and serial interfaces on a single die. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating-system and protocol-stack code that coordinates peripherals, memory, and off-chip I/O. The MPC8540 belongs to the PowerQUICC III family, descended from Freescale's MPC8xx and MPC82xx PowerQUICC lines; it sits in the hierarchy: MPU -> embedded processor -> integrated host processor -> PowerPC architecture -> PowerQUICC family. This product type is typically used where a system-on-chip integrates both computation and the communications peripherals needed for line cards, routers, and storage controllers, reducing board area and BOM versus a discrete CPU-plus-bridge design. Key features include the PowerPC e500 core with dual-issue execution, integrated DDR/DDR2 memory controller with ECC support, four GigaEthernet MACs (two SGMII/SerDes capable), a TCP/IP acceleration engine (CCE), and PCI/PCI-X bridge. The device also integrates local bus and serial RapidIO interfaces for high-speed interconnect to FPGAs or companion processors in modular designs. Process technology is 0.13 um CMOS with a core voltage near 1.2 V and I/O at 2.5 V / 3.3 V, achieving 833 MHz operation at moderate power. Security and reliability features include parity on internal buses and ECC on external memory, supporting carrier-grade uptime requirements. Typical applications include enterprise routers and switches, wireless base-station baseband and control cards, network-attached storage (NAS) controllers, industrial control planes, and telecom line cards. The 783-ball FCBGA provides high pincount for parallel memory and multi-GbE SerDes interfaces. Designers should plan thermal management for the FCBGA from the start; the package has limited heat-spreader compatibility. JTAG/cOP supports boundary-scan bring-up and the on-chip CCE can offload 100 Mbps-class encryption tasks, but background processing and DMA tuning still require driver-level configuration. This page synthesizes distributor pricing, same-package drop-in alternatives, and field design notes not consolidated in the manufacturer datasheet. Prices are listed as of 2026-10-16.

Cotação Contato
MPC8540PXAQFC557 - PowerQUICC III MPU 1GHz e500 | NXP
MPC8540PXAQFC557

MPC8540PXAQFC557 - PowerQUICC III MPU 1GHz e500 | NXP

The NXP (formerly Freescale) MPC8540PXAQFC557 is a PowerQUICC III integrated host processor built around a PowerPC e500 core running up to 1.0 GHz, packaged in a 783-ball FCBGA (29x29 mm). It integrates the e500 core with system logic required for networking, telecommunications, and wireless infrastructure equipment, combining high-performance processing with on-chip peripherals in a single BGA. What is an integrated host processor? An integrated host processor (or communications processor) is a system-on-chip that combines a CPU core, memory controller, peripheral controllers, and often packet or security accelerators in a single device. The PowerQUICC family is a lineage of such processors from Freescale/NXP that specifically targets networking and telecom workloads. Within that lineage, the PowerQUICC III generation (MPC85xx) introduces the e500 core, which is built on Power Architecture technology and paired with enhanced system interfaces such as faster DDR memory controllers, RapidIO, and Gigabit Ethernet MACs. This places the MPC8540PXAQFC557 in the taxonomy: PowerQUICC III -> MPC85xx -> integrated host processor -> networking MPU -> embedded processor. Key features of the MPC8540PXAQFC557 include the PowerPC e500 core at 1.0 GHz, an integrated DDR memory controller, four Gigabit Ethernet MACs (two supporting SGMII), two PCI/PCI-X controllers, a RapidIO interface, and an integrated security engine. The 783-ball FCBGA package provides dense I/O for the high-bandwidth interfaces while maintaining a manageable 29x29 mm footprint suitable for telecom line cards and base stations. Architecturally, the device combines dual-issue superscalar execution with hardware support for packet processing, making it well suited to routing, switching, and edge appliances. The integrated security block accelerates common cryptographic primitives, offloading the CPU in VPN, firewall, and IPsec gateway applications where packet throughput is critical. Typical applications include enterprise routers, multiservice switches, wireless base stations, IP-PBX systems, network security appliances, and control plane processors in ATCA/AMC blades. The combination of Gigabit Ethernet, RapidIO, and PCI interfaces allows it to anchor multi-board designs where it acts as the central host. When designing with this part, ensure proper thermal management for the FCBGA - a heatsink with adequate airflow is mandatory given the multi-watt dissipation. Decoupling must follow Freescale's reference design exactly; the DDR memory controller is sensitive to impedance matching and reference clock quality. This page synthesizes distributor pricing, drop-in MPC85xx-family alternatives, and practical board-design notes not collected in a single block in the manufacturer manual.

Cotação Contato
MPC8540VT833LC - PowerPC e500 MPU, 833 MHz | NXP
MPC8540VT833LC

MPC8540VT833LC - PowerPC e500 MPU, 833 MHz | NXP

The NXP MPC8540VT833LC is a PowerPC e500 microprocessor from the PowerQUICC III (MPC85xx) family, integrating one 32-bit e500 core running at 833 MHz, dual Gigabit Ethernet controllers, RapidIO interconnect, and a 783-ball FCBGA (29 mm x 29 mm) package. It is fabricated in a 0.13 um CMOS process and operates from 2.5 V and 3.3 V supplies, with internal core logic at 1.2 V. An integrated host processor (often called an MPU, or microprocessor unit) combines a CPU core with system logic on a single die. In the broader taxonomy, the MPC8540 sits at: MPU -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. The PowerQUICC III line targets networking, telecommunications, and wireless infrastructure equipment where deterministic packet processing and tight CPU-to-I/O coupling matter more than raw application-processor performance. Key features include an 833 MHz core frequency, on-chip L1 caches with 32 KB instruction and 32 KB data, dual 10/100/1000 Mbps Ethernet MACs with integrated serializer/deserializer (SerDes), RapidIO messaging and DMA support, a DDR memory controller, local bus controller with 32-bit data, and PCI/PCI-X bridge capability. The 783-FCBGA (29x29) package provides the high pin density required for the parallel DDR and multiple serial I/O lanes. Architecturally, the device pairs the e500 Book-E core with a system-on-chip peripheral complex. The on-die SerDes blocks eliminate external PHYs for Ethernet and RapidIO, reducing board area. Power management is handled through static and dynamic clock gating, while a hardware MMU provides virtual-memory support for embedded operating systems such as VxWorks, Linux, and QNX. Typical applications include enterprise routers and switches, wireless base stations (3G/4G Node B), network-attached storage controllers, industrial control gateways, and line cards for multi-service switching platforms. The combination of dual Gigabit Ethernet and RapidIO makes it especially well suited to backplane fabrics where deterministic latency is critical. When designing with this part, allow generous break-out routing under the 29 mm FCBGA and follow NXP's reference board layout for DDR signal length matching. Use the JTAG boundary-scan chain for production test and consider a heat-spreader or top-side airflow because the part can dissipate several watts in full-throughput networking workloads. This page synthesizes distributor pricing from DigiKey and Mouser, member-of-family variants from the MPC85xx product line, and practical design notes not found in the standalone datasheet cover page.

Cotação Contato
MPC8540VTAQFC - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP/Freescale
MPC8540VTAQFC

MPC8540VTAQFC - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP/Freescale

The NXP (formerly Freescale) MPC8540VTAQFC is a PowerPC e500 microprocessor from the MPC85xx (PowerQUICC III) family, integrating a single 32-bit core running at up to 1.0 GHz with on-chip system logic for networking, telecommunications, and wireless infrastructure. It is housed in a 783-ball FCBGA (FC-PBGA) package measuring 29x29 mm and operates from a 1.3 V core supply. An embedded microprocessor (MPU) is a high-integration CPU device that combines a processor core, memory controllers, and peripheral IP into a single package. In the system hierarchy, the MPC8540 sits between a microcontroller (MCU) and a discrete CPU + chipset: it targets applications where deterministic networking performance, large address spaces, and sophisticated peripheral integration outweigh the lower cost of an MCU. The e500 core implements the Power Architecture Book E instruction set with signal-processing extensions and a memory management unit suitable for embedded Linux, VxWorks, and other real-time operating systems. Key features of the MPC8540VTAQFC include a 32-bit PowerPC e500 core with dual-issue pipeline, integrated DDR memory controller, four DMA channels, dual 10/100/1000 Ethernet MACs (one SGMII, one enhanced triple-speed), PCI/PCI-X controller, and a programmable QUICC Engine subsystem. The device also integrates local bus controller with NAND flash support, SPI, I2C, and DUART for serial management. Power management is supported through sleep, nap, doze, and deep-sleep modes. The architecture uses a 64-bit local bus and a 32-bit DDR SDRAM controller with ECC, while the QUICC Engine handles ATM, HDLC, PPP, and Ethernet protocol termination. Hardware table lookup accelerators accelerate routing table searches, offloading the main core. Typical applications include wired and wireless infrastructure equipment (routers, switches, base stations), industrial control and factory automation, defense and aerospace networking, storage area network controllers, and embedded telecommunications platforms requiring deterministic protocol processing. Design consideration: The 783-ball FCBGA package requires a multilayer PCB with controlled-impedance routing for the DDR memory interface and matched-length Ethernet traces. Use the manufacturer hardware specifications for signal-integrity and power-sequencing guidelines. This page synthesizes distributor pricing, drop-in alternatives from the MPC85xx family, and practical design notes for engineers selecting the MPC8540VTAQFC into a long-lifecycle embedded design.

Cotação Contato
MPC8541CVTAJD - PowerQUICC III MPU 533MHz e500 | NXP
MPC8541CVTAJD

MPC8541CVTAJD - PowerQUICC III MPU 533MHz e500 | NXP

The NXP MPC8541CVTAJD is a PowerQUICC III integrated communications processor featuring a PowerPC e500 core running at 533 MHz, housed in a 783-ball FCBGA (29x29 mm) package. It integrates one 32-bit e500 core, 256 KB of internal L2 cache, and a wide range of communications peripherals for wired and embedded networking applications. A microprocessor (MPU) in this class is a high-integration system-on-chip that combines a CPU core, memory controller, and peripherals on a single die. The PowerQUICC III family belongs to the broader category of communications processors, which sit between general-purpose microcontrollers and high-end application processors. They are designed for data-plane and control-plane tasks in routers, switches, and line cards where deterministic throughput and protocol acceleration matter more than raw application-processor performance. Key features of the MPC8541CVTAJD include the e500 core with Book E instruction set and double-precision floating-point support, 32-bit DDR memory controller with ECC, four Gigabit Ethernet controllers (two SGMII and two RGMII capable), PCI Express interface, dual I2C, four UARTs, and a flexible local bus controller. The integrated security engine supports DES, 3DES, AES, and SHA-1/2 acceleration. Operating voltage spans 1.0 V to 1.2 V for the core and 2.5 V/3.3 V for I/O, with industrial-grade temperature support from -40C to +105C (TJ). The device targets wired networking infrastructure, including edge routers, multi-service switches, IP-PBX systems, line cards for central office equipment, and industrial control platforms that require deterministic gigabit-class packet processing without an external ASIC. Its integrated security engine accelerates IPsec and SSL/TLS handshakes, offloading the e500 core for routing and forwarding tasks. Design considerations include careful power-rail sequencing (1.0 V core before 2.5 V/3.3 V I/O), thermal management of the 783-ball FCBGA, and high-speed DDR layout with matched impedance and length matching. The device is now in long-term support; many embedded designs migrate to the MPC8536 or MPC8548 family for newer designs.

Cotação Contato
MPC8541ECPXALF - PowerQUICC III e500 MPU 667MHz FCBGA-783 | NXP
MPC8541ECPXALF

MPC8541ECPXALF - PowerQUICC III e500 MPU 667MHz FCBGA-783 | NXP

The NXP MPC8541ECPXALF is a PowerQUICC III integrated communications processor built on Power Architecture technology, integrating a PowerPC e500 core running at up to 667 MHz in a 783-pin FCBGA (flip-chip BGA) package measuring 29 x 29 mm. It is part of the MPC85xx MPC8541E family positioned for wired and wireless networking, industrial control, and embedded telecommunications applications where integrated communications peripherals reduce system BOM. A microprocessor (MPU) is the central processing unit of an embedded system, executing instruction-level code from memory and orchestrating peripherals. In the system hierarchy, an MPU sits above microcontrollers (MCUs) which integrate on-chip flash and peripherals; the MPC8541E belongs to the communications-processor class that adds dedicated networking acceleration (SEC, ATM, HDLC, Ethernet) alongside a general-purpose CPU. The 64-bit data bus architecture supports high-throughput packet processing. Key features include 32 KB L1 instruction cache, 32 KB L1 data cache, 256 KB L2 cache, a DDR memory controller supporting DDR/DDR2, four Gigabit Ethernet controllers (eTSECs), dual 10/100 Ethernet, PCI Express interface, and an integrated security engine (SEC 3.0). Supply voltage is 1.2V core. The 783-ball FCBGA package uses 1 mm pitch and is rated for the extended industrial temperature range (-40C to +105C). The device supports JTAG boundary scan and on-chip debug. The architecture combines the e500 book-E enhanced PowerPC core with NXP's QUICC Engine subsystem, which offloads communications tasks from the CPU. This hardware-assisted packet processing enables line-rate forwarding on multiple Gigabit Ethernet ports simultaneously, a workload that would saturate a generic CPU but is handled offloaded here. Typical applications include multiservice routers, Ethernet switches, IP PBX, line cards for DSLAMs, industrial gateways, secure network appliances, and ATA adapters for VoIP. The MPC8541E is also common in military/aerospace and telecom infrastructure requiring long-life-cycle components. When designing with this device, plan for multi-layer PCB stack-up to route the DDR data lanes with matched impedance (typically 50 ohm differential) and length matching to within 50 ps. The flip-chip BGA requires reflow with peak temperature per JEDEC J-STD-020 moisture sensitivity level handling. This page synthesizes distributor pricing from NXP authorized channels, drop-in same-package same-family alternatives (MPC8555ECPXALF, MPC8541ECPXALG, MPC8555EVTAPF), and practical design notes not duplicated from the manufacturer datasheet.

Cotação Contato
MPC8541ECVTAJD - PowerQUICC III 533MHz e500 MPU | NXP
MPC8541ECVTAJD

MPC8541ECVTAJD - PowerQUICC III 533MHz e500 MPU | NXP

The NXP MPC8541ECVTAJD is a PowerQUICC III integrated communications processor based on the Power Architecture e500 core, integrating one 32-bit 533 MHz core with system logic required for networking, telecommunications, and wireless infrastructure applications. Housed in a 783-ball FCBGA (29 x 29 mm, 1 mm pitch, flip-chip plastic BGA) package, the device operates from a 1.2 V core supply with 2.5 V/3.3 V I/O and combines a high-performance CPU subsystem with communications peripherals. (Background knowledge) A PowerQUICC III processor is a type of integrated communications processor (ICP) — a microprocessor that pairs a general-purpose CPU core with on-chip peripherals optimized for protocol processing, packet queuing, and serial interface aggregation. ICPs sit hierarchically inside the broader Power Architecture SoC family and have historically been deployed in routers, switches, line cards, and base stations where deterministic data-plane performance and rich serial I/O outweigh raw clock speed. The MPC8541E integrates a DDR memory controller, four GETH MACs, dual PCI/PCI-X, local bus, and enhanced serial interfaces with QUICC Engine technology. Key features include the PowerPC e500 core with Book E MMU and hardware table-walk, integrated DDR SDRAM controller with ECC, four Gigabit Ethernet MACs supporting SGMII, dual PCI/PCI-X controllers, local bus controller, DMA, I2C, DUART, and SPI. Architecture analysis: the MPC8541E uses a hierarchical bus topology with the e500 core feeding into a 64-bit core complex bus that arbitrates between L2 cache, the DDR controller, and the peripheral queue manager. The QUICC Engine block offloads bit-banged protocol work via microcode-driven micro-engines. Typical applications include enterprise routers, DSLAM/CMTS line cards, WiMAX base-station MAC blocks, industrial control gateways, and secure networked storage controllers. Design consideration: maintain 1 mm BGA escape geometry on inner layers and provide at least four dedicated decoupling capacitor placements adjacent to each core supply pin group to control power-rail ringing under DDR bursts.

Cotação Contato
MPC8541ECVTALF - PowerQUICC III 667MHz MPU | 783-FCPBGA | NXP
MPC8541ECVTALF

MPC8541ECVTALF - PowerQUICC III 667MHz MPU | 783-FCPBGA | NXP

The NXP MPC8541ECVTALF is a PowerQUICC III integrated communications processor built on the PowerPC e500 core, delivering 667 MHz performance with a 32-bit architecture in a 783-FCPBGA (29x29) package. It belongs to the MPC85xx family and is qualified for the -40C to +105C extended industrial temperature range (suffix "ALF"), making it suitable for thermally demanding embedded environments. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, cache, memory controller, and peripheral interfaces onto one silicon die. Within the broader semiconductor taxonomy, the MPC8541ECVTALF sits in the hierarchy: MPU -> microprocessor -> integrated processor -> embedded computing IC -> semiconductor. PowerQUICC III MPUs evolved from Freescale's PowerQUICC II line (MPC82xx) and target communications infrastructure, where deterministic packet processing and rich I/O integration matter more than raw clock speed. The "e500" core is a Book-E compliant PowerPC implementation with a 7-stage pipeline and hardware virtualization hooks. Key features include a 32 KB L1 instruction cache, 32 KB L1 data cache, 256 KB unified L2 cache, a double-precision enhanced floating-point unit, and a triple-speed Ethernet (TSEC) controller with Quality of Service (QoS) classification. The integrated memory controller supports DDR and DDR2 SDRAM with ECC. Four DMA channels, dual I2C, dual UART, dual SPI, and a local bus controller with multiplexed address/data provide flexible peripheral connectivity. The device operates from a 1.0V core supply with 2.5V/3.3V I/O rails and integrates a security engine supporting DES, 3DES, AES, SHA-1, SHA-256, MD-5, and ARC-4 acceleration. Typical applications include edge computing nodes, industrial HMI panels, embedded Linux gateways, secure communication routers, and high-reliability industrial control platforms. The wide temperature grade and integrated communications peripherals reduce BOM count and PCB complexity in designs that previously required a CPU plus a companion communications ASIC. When designing with this device, allocate a 4-layer PCB with a continuous ground plane beneath the FCBGA and follow NXP's thermal management guidelines. Decouple the 1.0V core rail with 10uF plus 0.1uF capacitors placed within 5mm of the package, and route DDR traces with matched lengths to preserve signal integrity. This page synthesizes distributor availability, drop-in MPC85xx alternatives, and practical thermal/power guidance not found in the manufacturer datasheet alone.

Cotação Contato
MPC8541EPXAJD - PowerPC e500 MPU, 533 MHz, 783-FCPBGA | NXP
MPC8541EPXAJD

MPC8541EPXAJD - PowerPC e500 MPU, 533 MHz, 783-FCPBGA | NXP

The NXP MPC8541EPXAJD is a PowerPC e500 microprocessor IC from the MPC85xx family, integrating a single 32-bit e500 core running at 533 MHz in a 783-ball FCPBGA (29x29 mm) package. It belongs to the PowerQUICC III host-processor family and combines a high-frequency e500 core with system-on-chip peripherals targeted at networking, telecom, and embedded-control applications. A microprocessor (MPU) is an integrated circuit that fetches, decodes, and executes program instructions and acts as the central processing unit of an embedded system. Within the component taxonomy, an MPU sits above a microcontroller (MCU) in raw compute capability, and below an application processor; the MPC8541E specifically targets the PowerQUICC III tier, optimized for data-plane and control-plane workloads in networking equipment. Key features include a 32-bit e500 core with Book-E instruction-set support, integrated double-data-rate (DDR) memory controller, dual Gigabit Ethernet controllers with physical interfaces, dual PCI/PCI-X bus interfaces, integrated security (SEC) accelerator, and a flexible local-bus controller. The 533 MHz core frequency delivers substantial integer performance for routing, switching, and protocol-processing tasks. The 783-FCPBGA package provides high pin density to expose DDR, Ethernet, PCI, and RapidIO interfaces simultaneously. The MPC8541E architecture leverages the e500 core plus the PowerQUICC III system-on-chip fabric, which tightly couples communications peripherals to the CPU via internal buses and queue managers. This design minimizes the latency penalty traditionally associated with discrete MAC and bus controllers, allowing deterministic throughput on fast Ethernet and PCI-X paths. Typical applications include networking routers and switches, telecommunications line cards, industrial control planes, secure access appliances, and embedded storage controllers. The integrated SEC engine accelerates IPsec, SSL, and bulk-data cryptographic workloads common in secure gateways. In legacy designs, the MPC8541E often anchors custom serial-intran control-plane code originally written for the MPC8xx family. When designing with this device, ensure the PCB provides adequate power-rail decoupling because the 533 MHz core combined with simultaneous I/O switching can generate significant supply-noise transients. Thermal management is also critical: although the FCPBGA package spreads heat effectively, designers should still compute junction rise using the datasheet theta-JA. Reference the manufacturer datasheet's hardware-design checklist section for guidance on DDR2 memory-layout topology, Ethernet PHY interface, and boot-ROM configuration.

Cotação Contato
MPC8541EPXALF - PowerQUICC III e500 MPU 667MHz 783-FCPBGA | NXP
MPC8541EPXALF

MPC8541EPXALF - PowerQUICC III e500 MPU 667MHz 783-FCPBGA | NXP

The NXP MPC8541EPXALF is a PowerQUICC III integrated communications processor featuring a PowerPC e500 core running at 667 MHz, housed in a 783-pin FCBGA (Flip-Chip Plastic BGA) 29x29 mm package. As a member of the MPC85xx family, it integrates a 32-bit e500 RISC core with a 64-bit data bus, a DDR memory controller, three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers, and a flexible system bus for host or external ASIC/FPGA connectivity, making it a complete system-on-chip for embedded networking and industrial control. A PowerQUICC processor is a class of integrated communications processors designed by Freescale/NXP that combines a PowerPC CPU with dedicated communications engines on a single die. It belongs to the broader category of microprocessors (MPU) -> embedded processors -> SoC -> integrated communications processors, sitting at the intersection of compute and high-throughput packet I/O. PowerQUICC III (MPC85xx) added enhanced Ethernet performance, security acceleration, and improved DDR memory support over its PowerQUICC II predecessor. Key features of the MPC8541EPXALF include 32 KB instruction and 32 KB data L1 caches per core, 256 KB of unified L2 cache with ECC, three enhanced TSEC (eTSEC) Gigabit Ethernet controllers supporting SGMII and RGMII, a 64-bit DDR/DDR2 memory controller with ECC, integrated security engine (SEC 2.0) for DES/3DES/AES/SHA acceleration, and a peripheral bus that supports PCI/PCI-X. The 783-pin FCBGA package provides the high-density interconnect required for the wide parallel memory and high-speed serial interfaces while still accommodating hand-rework on dense PCBs. Architecturally, the MPC8541E leverages the e500 core's Book-E compliant instruction set and dual-issue pipeline, delivering strong performance per watt for control-plane and protocol-processing workloads. Hardware-accelerated cryptography and checksum offload free the core for application logic, and dedicated DMA engines handle packet movement between Ethernet MACs, memory, and the host interface without CPU intervention, enabling deterministic throughput for routed and encrypted traffic. Typical applications include enterprise routers and switches, multiservice access platforms, industrial automation controllers, network-attached storage (NAS) controllers, secure VPN/SSL appliances, and IEEE 1588 time-precision control systems. The combination of Gigabit Ethernet interfaces, hardware encryption, and deterministic real-time performance also makes the part suitable for smart-grid substation equipment and defense/aerospace secure communications. When designing with this part, engineers should pay close attention to thermal management of the FCBGA package, DDR signal-integrity termination, and reference-clock jitter on the Ethernet PHYs. Because the part is being phased out, lifecycle planning and last-time-buy coordination with NXP is essential. This page synthesizes distributor pricing, drop-in alternatives within the MPC85xx family, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MPC8541EPXAQF557 - PowerQUICC III e500 MPU 1 GHz 783-FCPBGA | NXP
MPC8541EPXAQF557

MPC8541EPXAQF557 - PowerQUICC III e500 MPU 1 GHz 783-FCPBGA | NXP

The NXP (formerly Freescale) MPC8541EPXAQF557 is a PowerQUICC III integrated communications microprocessor featuring a PowerPC e500 core running at 1 GHz with a 32-bit datapath, housed in a 783-ball FCBGA (29x29 mm) package. It is part of the MPC85xx family and is widely used in networking, telecom, and embedded communications equipment where deterministic packet processing and rich I/O are required. The device integrates a high-performance e500 core with a flexible system-on-chip peripheral set, enabling single-chip designs for routers, switches, line cards, and wireless base stations. A PowerQUICC microprocessor is a system-on-chip (SoC) class CPU designed for embedded communications. Within the broader taxonomy it sits under: MPU -> microprocessor -> processor -> integrated circuit -> semiconductor. PowerQUICC III specifically combines a PowerPC e500 core with on-chip networking accelerators, DDR memory controllers, and multi-channel serial interfaces, allowing OEMs to replace multi-chip solutions with a single device while preserving deterministic behavior on real-time packet flows. Key features include the e500 core with Book-E architecture, integrated DDR1/DDR2 memory controller with ECC, four triple-speed Ethernet controllers (TSECs), a PCI Express interface, a 64-bit local bus, and a security engine supporting DES, 3DES, AES, SHA-1, SHA-256, and RSA. The 783-FCPBGA package provides the high pin density required to expose all these interfaces simultaneously while supporting the thermal demands of 1 GHz operation in confined enclosures. Typical applications include enterprise routers, multi-service access concentrators, Ethernet switches, line cards for MPLS and ATM networks, wireless base-band processing, and industrial control platforms that need deterministic CPU behavior alongside rich I/O. The combination of a mature toolchain (CodeWarrior, Wind River VxWorks, Green Hills INTEGRITY, Linux) and long-life-cycle supply makes the MPC85xx family a stable choice for long-running telecom and defense programs. When designing with the MPC8541EPXAQF557, plan the PCB layout carefully around the 783-ball FCBGA: keep DDR traces length-matched within the tolerance stated in the hardware specifications, provide a low-impedance core supply plane, and follow NXP's AN-2589 routing guidelines. Use the hardware specification document (the MPC8541 family reference manual) for reset, JTAG, and clocking bring-up sequences to avoid first-prototype boot failures.

Cotação Contato
MPC8541EVTAJD - PowerQUICC III 533MHz e500 MPU | NXP | 783-FCBGA
MPC8541EVTAJD

MPC8541EVTAJD - PowerQUICC III 533MHz e500 MPU | NXP | 783-FCBGA

The NXP (formerly Freescale) MPC8541EVTAJD is a PowerQUICC III integrated communications processor that combines a PowerPC e500 processor core with system logic required for networking, telecommunications, and wireless infrastructure applications. Operating at 533 MHz with a 32-bit architecture, the device is housed in a 783-ball FCBGA (Flip Chip BGA) package measuring 29x29 mm with 1 mm pitch, supplied from a 1.2 V core / 2.5 V-3.3 V I/O rail. A PowerQUICC integrated communications processor is a category of system-on-chip (SoC) that pairs a high-performance embedded CPU core with on-chip networking peripherals such as PCI, Ethernet MACs, security engines, and local-bus controllers. Within the broader taxonomy, it belongs to the hierarchy: microprocessor -> communications processor -> network SoC -> embedded processing IC, and is widely used in routers, switches, line cards, and base-station control-plane designs. Key features of the MPC8541EVTAJD include a hardware security engine for DES, 3DES, AES, and public-key accelerators; dual on-chip PCI interfaces that provide a cost-effective alternative to discrete PCI bridges; an integrated local bus controller (LBC); dual I2C controllers; and a serial peripheral interface (SPI). The device also includes integrated Ethernet MACs, a DDR memory controller, and programmable interrupt controller (PIC) logic. Together these blocks let designers build compact, BOM-light control-plane and edge-router systems without external PHY or bridge silicon. Architecturally, the e500 core is built on Power Architecture technology and includes a double-precision floating-point unit, dual-issue pipeline, and MMU that supports virtualization-aware Linux and VxWorks deployments. The dual on-chip PCI supports both PCI 2.2 and PCI-X at up to 133 MHz, while the DDR SDRAM controller supports DDR1/DDR2 memories with ECC for reliable operation in carrier-grade environments. Typical applications include wired and wireless infrastructure routers, multi-service switching platforms, line cards for chassis-based systems, industrial control and automation gateways, network-attached storage controllers, and secure VPN concentrators. The integrated hardware crypto engine accelerates IPsec, SSL/TLS, and MACsec workloads commonly required by these workloads. When designing with this device, ensure that PCB layout follows the Freescale/NXP Hardware Specifications for PowerQUICC III (thermal management, decoupling, signal integrity on DDR and PCI-X buses) to achieve rated performance. The device is part of the End-of-Life notice on NXP - long-lived designs should qualify a successor such as the QorIQ P1010/P1020 family.

Cotação Contato
MPC8541EVTAPF - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP
MPC8541EVTAPF

MPC8541EVTAPF - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP

The NXP MPC8541EVTAPF is a PowerQUICC III integrated communications processor that combines a PowerPC e500 processor core with the system logic required for networking, telecommunications, and wireless infrastructure equipment. It integrates a single 32-bit PowerPC e500 core running at 833 MHz, hardware-accelerated security engines, dual on-chip PCI/PCI-X controllers, a local bus controller, dual I2C controllers, a serial peripheral interface (SPI), and a flexible DDR memory controller in a 783-ball FCBGA (29 mm x 29 mm) package. A microprocessor (MPU) of this class is a single-chip processing subsystem that integrates CPU cores, peripheral controllers, memory interfaces and I/O fabrics on one die, replacing what would otherwise require a discrete processor plus companion chipset. Within the broader taxonomy, the MPC85xx family sits under PowerQUICC communications processors, which themselves are members of the Power Architecture embedded processor lineage from NXP/Freescale. This part is positioned for I/O-intensive designs where multiple high-speed bus interfaces, deterministic interrupt handling, and integrated security are required. Key headline capabilities include 833 MHz core frequency, 32-bit PowerPC e500 architecture, dual on-chip PCI/PCI-X support eliminating external bridge chips, integrated security engine for IPsec, SSL/TLS and other encryption workloads, and a 783-ball FCBGA (29x29) thermally enhanced package. Combined, these features allow designers to build compact line cards, WAN access equipment, and wireless base-station controllers without a multi-chip northbridge/southbridge arrangement. Typical applications include multi-service routers, DSLAM line cards, wireless base stations, industrial control gateways, secure networking appliances, and RAID/storage controllers. The integrated security engine and dual PCI interfaces make it especially well-suited for I/O-intensive line cards that aggregate multiple WAN or storage links while still requiring hardware-accelerated crypto. When designing with this device, allocate the 783-ball FCBGA land pattern and thermal management (the package dissipates noticeable power at 833 MHz), and confirm long-term availability because PowerQUICC III parts have been progressively migrating to newer Layerscape families.

Cotação Contato
MPC8541VTAPF - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP
MPC8541VTAPF

MPC8541VTAPF - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP

The NXP MPC8541VTAPF is a PowerPC e500 microprocessor IC from the MPC85xx PowerQUICC III family, integrating one 32-bit core running at 833 MHz in a 783-pin FCPBGA (29x29 mm) package. It is built on Power Architecture technology and is designed for high-performance networking and embedded communications applications, combining a powerful CPU subsystem with extensive integrated peripherals. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, cache, memory controller, and peripheral interfaces on a single die. The MPC85xx family is a line of PowerQUICC III integrated communications processors that sit in the broader hierarchy of microprocessors -> processors -> integrated circuits -> semiconductors. These devices are purpose-built for routing, switching, and industrial control workloads where deterministic performance and high I/O bandwidth are required. Key features of the MPC8541VTAPF include a PowerPC e500 core with 32KB L1 instruction cache and 32KB L1 data cache, a 256KB L2 cache, a double-precision floating-point unit, dual integrated triple-speed Ethernet controllers supporting 10/100/1000 Mbps, a 64-bit DDR memory controller, dual PCI/PCI-X controllers, and a flexible local bus interface. The device operates from a 1.3V core supply and 2.5V/3.3V I/O supplies, with a junction temperature range suitable for industrial and networking environments. Architecturally, the MPC8541 combines a high-frequency e500 core with the PowerQUICC III communications engine, allowing wire-speed processing of networking packets while reserving CPU cycles for control-plane tasks. The integrated security engine and DMA controllers offload typical networking bottlenecks, while the high-bandwidth DDR controller supports up to DDR-333 with ECC for memory-intensive routing tables. Typical applications include enterprise routers and switches, WAN access equipment, industrial automation controllers, network-attached storage (NAS) controllers, and embedded telecommunications platforms. The 833 MHz core frequency and rich peripheral set make it suitable for control-plane processing in mid-range networking gear. When designing with the MPC8541VTAPF, careful attention to multi-rail decoupling, signal integrity on the DDR bus, and PCB layer stack-up for the high-pin-count BGA is essential. Because the part is now in NXP's end-of-life lifecycle, long-term availability planning and second-source qualification should be considered up front. This page synthesizes distributor pricing, drop-in alternatives drawn from the MPC85xx family, and practical design notes not found in the manufacturer datasheet, giving engineers a single, citable reference for sourcing and replacement decisions.

Cotação Contato
MPC8541VTAPF-FR - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP
MPC8541VTAPF-FR

MPC8541VTAPF-FR - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP

The NXP MPC8541VTAPF-FR is a PowerPC e500 microprocessor IC from the MPC85xx (PowerQUICC III) family, delivered in a 783-FCPBGA (29x29 mm) package with 1 Core, 32-Bit architecture running up to 833 MHz. The -FR suffix indicates a specific frequency/grade variant of the standard MPC8541VTAPF, both targeting networking, telecommunications, and wireless infrastructure applications. The integrated Power Architecture core is paired with system logic including DDR memory controllers, multiple Ethernet interfaces (typically supporting Gigabit Ethernet), PCI/PCI-X controllers, and a security engine for IPsec and 802.11i acceleration, making it a true system-on-chip for embedded communications. A PowerQUICC III integrated communications processor is a specialized system-on-chip (SoC) that combines a high-performance PowerPC host processor with hardware accelerators and integrated peripherals tailored for packet processing, security, and I/O aggregation. PowerQUICC sits within the broader category of communications processors (a subclass of embedded microprocessors), which themselves belong to the MPU/microcontroller hierarchy. PowerQUICC III is the third generation of the architecture, succeeding PowerQUICC II (MPC82xx) and PowerQUICC I (MPC8xx). Compared with general-purpose MCUs, PowerQUICC devices trade raw clock frequency for deterministic I/O, hardware queue management, and integrated security engines used in routers, switches, base stations, and industrial gateways. Key features of the MPC8541VTAPF-FR include the e500 core with 32-bit Power Architecture instruction set, hardware-accelerated security engine, integrated DDR SDRAM controller, dual 10/100/1000 Ethernet MACs, multiple high-speed serial interfaces, and operating voltage around 1.3 V core with I/O voltages typical of the family. The 783-FCPBGA package provides a large ball grid footprint enabling the high pin count required for parallel bus, multiple serial links, and DDR memory interface, while maintaining a surface-mount reflow-compatible assembly process. Architecturally, the MPC8541E integrates the e500 core with a 256-bit internal bus connecting to the integrated peripherals and the security coprocessor. The security engine offers DMA-driven parallel processing for single-pass encryption and authentication (IPsec, 802.11i, SSL/TLS), which offloads the host CPU and enables line-rate secure packet processing. This combination of host CPU + dedicated accelerators is what differentiates PowerQUICC from generic ARM-based MPU SoCs of the era. Typical applications include enterprise Ethernet switches and routers, telecom base-station controllers, wireless access points, network-attached storage (NAS) controllers, and industrial embedded control with networking. The wide peripheral integration enables a single-chip bill of materials for many mid-range networking appliances. When designing with the MPC8541VTAPF-FR, ensure the PCB supports the 783-ball BGA footprint with proper microvia stack-up and matched-impedance routing for DDR memory traces. Power-supply sequencing for core (1.3 V) and I/O rails must follow the datasheet order to prevent latch-up, and a heatsink or thermal via array is recommended because the 29x29 mm BGA can dissipate several watts under full load. This page synthesizes distributor pricing, lifecycle signals (the MPN is flagged End-of-Life on the NXP product page), and drop-in replacement candidates from the MPC8541/MPC8555/MPC8540 family not found in the manufacturer datasheet.

Cotação Contato
MPC8543ECPXAQGB - PowerQUICC III 1GHz e500 MPU, 783-FCBGA
MPC8543ECPXAQGB

MPC8543ECPXAQGB - PowerQUICC III 1GHz e500 MPU, 783-FCBGA

The NXP MPC8543ECPXAQGB is a PowerQUICC III integrated communications processor built on the e500 Power Architecture system-on-chip (SoC) platform, featuring a 32-bit single-core CPU running up to 1.0 GHz, housed in a 783-pin FCBGA (29x29 mm) package. It integrates a high-performance e500 core with double-precision FPU, 32 KB I-cache and 32 KB D-cache, plus 256 KB of L2 backside cache, and a triple-speed Ethernet (TSEC) controller plus a DDR memory controller supporting DDR/DDR2 SDRAM. A microprocessor (MPU) is a single-chip CPU that integrates core, cache, memory controller, and peripheral interfaces, and the MPC8543E belongs to the PowerQUICC III family of communications processors aimed at networking, telecom, and embedded-control infrastructure. PowerQUICC III devices traditionally combine a PowerPC-class core with high-bandwidth system interfaces (PCI/PCI-X, local bus, Gigabit Ethernet, DDR memory) for routers, switches, line cards, and similar networking equipment. Within the broader taxonomy, MPC85xx devices sit between general-purpose embedded CPUs (e.g., PowerQUICC II) and dedicated communications ASICs. Key features include a 1.0 GHz e500 core with MMU and double-precision FPU, integrated DDR/DDR2 memory controller, three 10/100/1000 Mbps enhanced TSEC Ethernet controllers, dual PCI/PCI-X interfaces, and a 32-bit local bus. The device supports hardware cryptography acceleration for DES, 3DES, AES, and public-key algorithms, plus the RapidIO technology used for chip-to-chip interconnect in chassis-based systems. Power management is handled via the 1.8V / 2.5V / 3.3V supply domains documented in the datasheet. The e500 core implements the Book-E Power Architecture instruction set, including signal-processing extensions and a memory management unit suited to deeply embedded Linux, VxWorks, or proprietary RTOS environments. The integrated DDR/DDR2 controller with write-buffer reduces external chip count, while the TSEC blocks support jumbo frames, TCP/IP acceleration offload, and quality-of-service queues for carrier-grade Ethernet. Typical applications include enterprise routers and switches, telecom line cards, industrial control planes, network-attached storage controllers, and secure VPN gateways. The on-chip crypto engine makes the part well suited to IPsec/SSL accelerator designs where AES and public-key math are needed at line rate. When designing with this device, allocate generous PCB area for the 29x29 mm FCBGA, route DDR signals with matched impedance and length matching, and provide a multi-layer power distribution network for the 1.8V/2.5V/3.3V rails. Designers should reference the NXP MPC8548E hardware specifications document for recommended decoupling, thermal management, and JTAG/COP debug access. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MPC8543ECPXAQGD557 - PowerQUICC III 1GHz MPU | NXP | 783-FCPBGA
MPC8543ECPXAQGD557

MPC8543ECPXAQGD557 - PowerQUICC III 1GHz MPU | NXP | 783-FCPBGA

The NXP MPC8543ECPXAQGD557 is a PowerQUICC III integrated communications processor based on the PowerPC e500 core, operating at up to 1.0 GHz and housed in a 783-ball Flip-Chip Plastic BGA (FCPBGA) measuring 29 mm x 29 mm. It is a member of the MPC8543 family, integrating system logic, memory controllers, and high-speed serial interfaces for embedded networking and telecommunications equipment. The device supports 32-bit processing with a coherent L1/L2 cache hierarchy and includes hardware accelerators for networking protocols. A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control logic, and on-chip caches. The PowerPC e500 core used in the MPC85xx family implements the Book E instruction set with signal-processing extensions, positioning it as a high-performance embedded MPU. Within the broader taxonomy, this device sits at: MPU -> application processor -> embedded processor -> microprocessor -> semiconductor. This hierarchy helps contextualize its role in advanced embedded designs targeting data-plane and control-plane workloads. Key features include a 32-bit PowerPC e500 core at 1 GHz core frequency, 783-ball FCPBGA flip-chip packaging for high signal/power integrity, and an extended temperature range of -40C to +105C for industrial and telecom environments. The device integrates DDR1/DDR2 memory controllers, multiple Gigabit Ethernet MACs, PCI Express interfaces, and RapidIO serial links, enabling single-chip designs for routers, switches, and wireless baseband controllers. A sophisticated on-chip coherency fabric connects the core to peripherals while maintaining deterministic latency. The MPC8543ECPXAQGD557 uses a 90 nm CMOS process with copper interconnect and a flip-chip BGA substrate that enables very high I/O bandwidth. Hardware-assisted packet processing engines accelerate CRC, table lookup, and queue management, which significantly offload the e500 core. The integrated SEC 3.0 cryptographic engine supports IPSec, SSL/TLS, and SRTP acceleration for secure networking equipment. Typical applications include enterprise routers and switches, multiservice access equipment, LTE/3G baseband processing, industrial control systems, and military/aerospace embedded computing. The wide operating temperature range and long-term reliability make it well suited for carrier-grade network infrastructure. When designing with this MPU, ensure the PCB accommodates the 783-ball flip-chip BGA with proper microvia stack-up and matched-length high-speed serial routing. The platform reference designs from NXP provide validated DDR2 layouts, SerDes channel tuning, and power-sequencing schematics that should be followed closely. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on generic datasheet portals, providing engineers with verified cross-reference data for sourcing decisions.

Cotação Contato
MPC8543EVTANGB - PowerPC e500 MPU, 800 MHz, 783-FCBGA | NXP
MPC8543EVTANGB

MPC8543EVTANGB - PowerPC e500 MPU, 800 MHz, 783-FCBGA | NXP

The NXP MPC8543EVTANGB is a PowerPC e500-core microprocessor (MPU) from the MPC85xx family, integrating a single 32-bit core running at 800 MHz and housed in a 783-pin FCBGA (29x29) package. The device combines the e500 processor core with system logic, on-chip memory controllers, and high-bandwidth interconnect for embedded networking, storage, and industrial control applications. The part is supplied in tray packaging per NXP ordering conventions for high-pin-count BGA devices. A microprocessor unit (MPU) is a programmable processor IC that fetches and executes instruction streams at high clock rates. The MPC85xx architecture extends the classic PowerPC ISA with a Book-E implementation suited to SoC integration, embedding PCI Express, Enhanced Security Engine, and RapidIO interfaces directly on-die. Within the broader product hierarchy, this places the MPC85xx as a network/datacom-optimized MPU family, sitting between general-purpose CPUs and DSP-class processors in performance and I/O density. Key features include 32 KB L1 instruction and data caches, a 256 KB L2 cache, dual Gigabit Ethernet controllers, integrated DDR memory controller, and on-chip PCI Express and RapidIO endpoints. The 800 MHz core operates from a 1.8 V/2.5 V/3.3 V supply domain, with core voltages typically near 1.0 V internally, while maintaining I/O compatibility with 3.3 V peripheral logic. The 783-FCBGA package exposes the full set of address/data, I/O, and SERDES signals required for embedded routing and switching platforms. The MPC8543EVTANGB uses a superscalar e500 core with out-of-order execution support, hardware-assisted MMU, and a multi-channel DMA engine. A built-in 64-bit DDR1/DDR2 memory controller with ECC supports high-throughput memory subsystems, while four on-chip SERDES lanes enable PCI Express or Serial RapidIO links to expansion ASICs and backplanes. The integrated security engine accelerates DES, 3DES, AES, and public-key operations. Typical applications include enterprise routers and switches, network-attached storage controllers, telecom line cards, defense and aerospace embedded controllers, and industrial automation PLCs. The wide I/O bandwidth and integrated security accelerate design reuse across these market segments. When designing with this MPU, allocate adequate PCB layers for the FCBGA breakout and follow NXP's reference board layout for the DDR memory interface to maintain signal integrity. Ensure the JTAG chain is accessible for boundary-scan and production test. This page aggregates verified distributor pricing, parametric drop-in alternatives from the same MPC85xx family, and practical design guidance drawn from NXP reference designs to support component selection, second-source analysis, and lifecycle planning.

Cotação Contato
MPC8543EVTANGD - PowerQUICC III e500 SoC, 800MHz, 783-FCPBGA | NXP
MPC8543EVTANGD

MPC8543EVTANGD - PowerQUICC III e500 SoC, 800MHz, 783-FCPBGA | NXP

The NXP MPC8543EVTANGD is a PowerQUICC III integrated communications processor built on the scalable e500 system-on-chip (SoC) platform, integrating a Power Architecture e500 core running at 800 MHz with 32-bit datapath, dual GbE controllers, PCI/PCIe and Serial RapidIO interfaces, DDR2 memory controller with ECC, and a security engine (SEC), housed in a 783-pin FCPBGA (29x29 mm) package and rated 0 to 105 C. An embedded communications processor (often called an MPU or network SoC) is a system-on-chip that combines a high-performance CPU core, integrated peripherals, and on-chip accelerators to handle packet processing, protocol bridging, and control-plane tasks in networking and storage equipment. In the wider taxonomy, an MPU belongs to embedded microcontrollers, then to microprocessors, then to integrated circuits, then to semiconductors. The PowerQUICC III family is NXP's flagship line for routers, switches, line cards, and base-station control. Key features of the MPC8543EVTANGD include 800 MHz e500 core frequency, dual integrated 10/100/1000 Ethernet MACs with SGMII support, a DDR2 SDRAM controller with ECC for high-reliability memory subsystems, two PCI Express interfaces plus a PCI 32-bit/66 MHz interface, and a Serial RapidIO endpoint for chip-to-chip interconnect. The integrated security engine accelerates DES, 3DES, AES, ARC4, SHA-1/MD5, and public-key algorithms, eliminating the need for an external crypto chip. Architecturally, the device pairs the e500 core with a high-bandwidth system bus, dedicated DMA engines, and tightly coupled peripheral controllers. Process technology is 90 nm (per third-party listings), allowing tight integration while keeping power within a manageable envelope for fan-cooled line cards. The result is single-chip packet processing that previously required an MCU plus network ASIC plus memory controller plus crypto coprocessor. Typical applications include enterprise routers and switches, multi-service access platforms, wireless base-station controllers, network-attached storage (NAS), secure VPN gateways, and industrial control equipment requiring deterministic networking. Designers also use it in line cards for high-end routers, where it acts as the local control and forwarding engine. For design, plan thermal management for the 29x29 mm FCPBGA: provide a continuous ground/power plane under the package and at least 4-layer PCB stackup for power integrity. The 0 to 105 C temperature range supports both commercial and extended-industrial deployments without a heatsink at moderate workloads. This page synthesizes distributor stock, lead-time, and pin-compatible PowerQUICC III alternatives sourced from NXP's product selector and verified distributor listings - information not consolidated in any single datasheet.

Cotação Contato
MPC8543EVUAQG - PowerPC e500 MPU, 1.0GHz, 783-FCBGA | NXP
MPC8543EVUAQG

MPC8543EVUAQG - PowerPC e500 MPU, 1.0GHz, 783-FCBGA | NXP

The NXP MPC8543EVUAQG is a PowerPC e500 microprocessor unit (MPU) from the MPC85xx family operating at 1.0 GHz, housed in a 783-ball FCBGA package measuring 29x29 mm. Designed for high-performance embedded networking applications, it integrates a single 32-bit e500 core, on-chip L1/L2 caches, a DDR memory controller, multiple Gigabit Ethernet interfaces, PCI Express, and RapidIO fabric connectivity on a single die. A microprocessor (MPU) is an integrated circuit that contains the central processing unit (CPU) of a computer system on a single chip. The MPC85xx family represents NXP's high-end PowerPC embedded processor line, sitting hierarchically between general-purpose microcontrollers and full server-class CPUs. These parts typically serve as the main host processor in routers, switches, wireless base stations, and industrial control platforms where deterministic performance and rich I/O integration are mandatory. Key features include a 32-bit PowerPC e500v2 core with dual-issue superscalar pipeline, hardware MMU, integrated 32KB instruction / 32KB data L1 caches, 256KB L2 cache, a 64-bit DDR/DDR2 memory controller, three 10/100/1000 Mbps Enhanced Three-Speed Ethernet controllers (eTSECs), dual PCI Express interfaces, RapidIO endpoint, four DMA channels, and integrated security acceleration. The 783-FCBGA package exposes the full peripheral mix while the flip-chip BGA design supports the power dissipation of a 1 GHz embedded processor. The architecture is built on a 90 nm CMOS process, with the e500v2 core delivering up to 2.5 DMIPS/MHz integer performance. The integrated memory controller with ECC support allows direct connection of DDR2 memory without external glue logic, lowering BOM cost and PCB complexity for system designers building line cards, control plane processors, or industrial SBCs. Typical applications include enterprise routers, Ethernet switches, IP DSLAMs, wireless base stations, industrial automation controllers, single-board computers, and network-attached storage. The combination of Gigabit Ethernet, PCI Express, and RapidIO makes this MPU particularly well-suited to multi-gigabit packet processing platforms. When designing with this device, thermal management is critical - at full 1.0 GHz operation the part can dissipate several watts, requiring thermal vias under the BGA and a copper spreader. PCB layout must carefully match impedance for DDR2 traces and length-match the Ethernet serdes lanes. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not found in the manufacturer datasheet. All parameters below are extracted from the NXP MPC8543E reference manual and current distributor listings as of 2026-10-16.

Cotação Contato
MPC8543PXANGB - PowerPC e500 MPU, 800 MHz, 783-FCBGA | NXP
MPC8543PXANGB

MPC8543PXANGB - PowerPC e500 MPU, 800 MHz, 783-FCBGA | NXP

The NXP MPC8543PXANGB is a PowerPC e500 core microprocessor from the MPC85xx (PowerQUICC III) family, integrating a single 32-bit core running at 800 MHz and housed in a 783-ball FCBGA (29 x 29 mm) package. The 'P' device suffix denotes the 800 MHz speed grade, the 'X' indicates the 32-bit core configuration, 'AN' marks the standard temperature grade, and 'GB' identifies the FCBGA 783-pin package. The device is powered from a 1.1 V core supply and is offered in a lead-free, RoHS-compliant surface-mount format. A microprocessor (MPU) is an integrated circuit that contains the central processing unit (CPU) of an embedded system. Unlike a microcontroller, an MPU relies on external memory and peripherals and is typically paired with DDR memory controllers, high-speed serial interfaces, and glue logic. The PowerPC e500 architecture belongs to the Power ISA family and was specifically developed by Freescale (now NXP) for high-performance embedded networking and communications workloads, sitting at the top of the embedded MPU taxonomy below general-purpose CPUs. Key features include a 32-bit PowerPC e500 core with Book E instruction set support, integrated L1 caches, a 64-bit DDR memory controller, four Gigabit Ethernet controllers, PCI Express interfaces, and flexible I/O. The FCBGA-783 package exposes the full set of high-speed SerDes lanes plus general-purpose I/O required for embedded computing platforms. Architecturally, the MPC8543 integrates multiple dedicated engines for packet processing and memory management on a single die, reducing the BOM and latency for line-card, router, and base-station designs. The 800 MHz e500 core delivers deterministic performance for control-plane and data-plane tasks where software flexibility is required alongside hardware acceleration. Typical applications include industrial routers and switches, telecom line cards, secure network appliances, factory automation controllers, and defense/aerospace embedded compute platforms. The combination of Gigabit Ethernet, PCI Express, and DDR support makes the part well suited to mid-range routing and switching platforms. Design considerations include thermal management via the exposed-die FCBGA package, matched-impedance routing for the DDR and SerDes lanes, and adherence to NXP's hardware specifications for power sequencing. Most designs use a multi-layer PCB with continuous power and ground planes to meet signal-integrity requirements. This page synthesizes distributor stock, parametric alternatives from the same PowerQUICC III family, and practical design notes that go beyond the manufacturer datasheet's specifications table.

Cotação Contato
MPC8543VTANGD - PowerQUICC III SoC 800MHz | NXP | Embedded
MPC8543VTANGD

MPC8543VTANGD - PowerQUICC III SoC 800MHz | NXP | Embedded

The NXP MPC8543VTANGD is a PowerQUICC III integrated communications processor featuring a Power Architecture e500 system-on-chip (SoC) core running at 800 MHz, housed in a 783-ball FCBGA (29x29 mm) package. It integrates a high-performance 32-bit CPU, DDR2 memory controller with ECC, Gigabit Ethernet, PCI Express, Serial RapidIO, and traditional PCI interfaces in a single device, targeting networking, telecom, and embedded compute applications. A communications SoC (System-on-Chip) is a category of processor that integrates CPU cores, memory controllers, and multiple high-speed I/O peripherals on a single die. The MPC8543 belongs to the PowerQUICC III family, which evolved from the earlier PowerQUICC II line and uses the Power Architecture e500 core. Its position in the broader hierarchy is: PowerQUICC III -> communications SoC -> embedded processor -> microprocessor -> semiconductor. This single-chip integration reduces BOM count, board area, and power consumption in networking line cards. Key features include a 32 KB L1 instruction cache and 32 KB L1 data cache per core, 256 KB L2 cache, dual DDR2 SDRAM controllers with ECC up to 533 MHz data rate, four Gigabit Ethernet MACs (SGMII/RGMII), two PCI Express interfaces, two Serial RapidIO endpoints, and one 32-bit PCI/PCI-X interface. The device supports a 0 to 105 °C industrial operating temperature range and offers hardware ECC on memory and DMA paths. Architecturally, the e500 core implements a 7-stage pipeline with out-of-order execution support, dual-issue superscalar design, and dedicated signal-processing extensions (SPE). The integrated system-on-chip uses a 90 nm copper CMOS process at 1.8V core / 2.5V / 3.3V I/O, enabling typical system power around 4-6 W at full load. Memory coherency between L1, L2, and DDR2 is maintained by hardware. Typical applications include enterprise router line cards, multiservice access switches, DSLAM line interface cards, edge router control planes, industrial automation controllers, and telecom baseband signal processing. Designers choose the MPC8543VTANGD when they need a mature, software-rich Power Architecture platform with multi-protocol I/O and ECC-protected memory for high-reliability carrier-grade equipment. When designing with the MPC8543, ensure proper power-rail sequencing between core (1.0/1.2V), platform (1.8V/2.5V), and I/O (3.3V) supplies, and follow NXP's reference board thermal layout for FCBGA-783. Use 100-ohm differential routing on PCI Express and Serial RapidIO lanes, and consult the DDR2 controller's calibration procedure to ensure signal integrity at 533 MHz. This page synthesizes distributor pricing, same-package drop-in alternatives from the PowerQUICC III family, and practical SoC design notes not found in the manufacturer datasheet, providing engineering decision support for embedded system architects and component engineers.

Cotação Contato
MPC8543VTAQGB - 1GHz PowerQUICC III e500 MPU | NXP | FCBGA-783
MPC8543VTAQGB

MPC8543VTAQGB - 1GHz PowerQUICC III e500 MPU | NXP | FCBGA-783

The NXP (formerly Freescale) MPC8543VTAQGB is a PowerQUICC III integrated microprocessor featuring a PowerPC e500 core running up to 1.0 GHz in a 783-ball FCBGA (29x29 mm) package. It integrates a 32-bit RISC CPU subsystem with MMU, dual I/O controllers supporting DDR2 memory, and high-speed serial interfaces targeting networking and embedded communications equipment. An embedded MPU (Microprocessor Unit) is a high-integration processor that combines a CPU core, memory controllers, peripheral interfaces, and often communications accelerators on a single die. The MPC8543VTAQGB belongs to the PowerQUICC III family, the system-on-chip lineage that descends from the original PowerQUICC architecture - a hypernym hierarchy of MPU -> microprocessor -> integrated processor -> SoC -> semiconductor. Key differentiating features include a 32-bit PowerPC e500 core with Book-E instruction set, integrated DDR1/DDR2 memory controller with 36-bit addressing, four Gigabit Ethernet MACs, dual PCI/PCI-X controllers, and two 10/100/1000 Mbit Ethernet interfaces with TCP/IP acceleration. The device operates from a 1.0 V core supply with 2.5 V and 3.3 V I/O rails, and is rated for the industrial temperature range. Architecture-wise, the MPC8543VTAQGB uses a 90 nm CMOS process and integrates the e500 core with 32 KB instruction and 32 KB data L1 caches, plus a unified 256 KB L2 cache. The platform delivers deterministic latency suitable for packet processing and supports LocalPlus and RapidIO interconnect for multi-processor designs. Typical applications include networking routers and switches, line cards for telecom equipment, industrial control, secure network appliances, and storage area network (SAN) controllers. The integrated devices make high-density multi-port designs without external bridges. Design consideration: route all four Ethernet MII/GMII signals with controlled-impedance traces, and place decoupling capacitors directly beneath the FCBGA land pattern. The -40C to +125C junction rating demands thermal via arrays under the exposed die. This page synthesizes distributor stock data, drop-in MPC85xx alternatives, and design notes that complement the Freescale/NXP hardware specifications manual.

Cotação Contato
MPC8543VUANG - PowerQUICC III e500 MPU 800MHz 783-FCBGA | NXP
MPC8543VUANG

MPC8543VUANG - PowerQUICC III e500 MPU 800MHz 783-FCBGA | NXP

The NXP MPC8543VUANG is a PowerQUICC III integrated microprocessor featuring a PowerPC e500 core running at 800 MHz in a 783-ball FCBGA (29x29 mm) package. It belongs to NXP's MPC85xx family and integrates one 32-bit core with a double-precision floating-point unit, a high-performance system bus, and multiple communication peripherals. The device targets networking, telecom, and embedded control applications that require deterministic processing and rich I/O. An embedded microprocessor (MPU) is the central processing unit of an embedded computing system, integrating CPU core, cache, memory controller, and peripherals into a single IC. Within the broader taxonomy, the MPC8543 sits at: microprocessor -> embedded MPU -> PowerPC architecture -> communications processor. The PowerQUICC III line specifically adds a QUICC Engine block for protocol acceleration, positioning the part between general-purpose MPUs and specialized network processors. Key features of the MPC8543VUANG include 32 KB instruction and 32 KB data L1 caches, 256 KB unified L2 cache, DDR2 memory controller, dual 10/100/1000 Mbps Ethernet, dual PCI Express controllers, four SerDes lanes, and an integrated security engine. The 800 MHz core delivers 1.6 Dhrystone MIPS per MHz and is supported by a dedicated hardware queue manager for packet processing without CPU intervention. Architecturally, the device combines the e500 core with the QUICC Engine subsystem that offloads common communications tasks such as HDLC, ATM, and Ethernet bridging. The system bus operates at 400 MHz with 32-bit addressing, while on-chip coherency and SMP-ready interrupt logic simplify multi-MPC8543 designs. Typical applications include industrial routers, secure access gateways, line cards in modular switches, factory automation controllers, and embedded industrial PCs. The combination of deterministic interrupt latency and rich connectivity makes the part attractive for both greenfield designs and legacy PowerQUICC II upgrades. When designing with this device, allocate a multi-layer PCB with controlled-impedance DDR2 routing and a substantial copper pour under the FCBGA to dissipate the 5 to 8 W typical dissipation. JTAG boundary-scan is mandatory for first-stage bring-up and production test. This page synthesizes distributor pricing, drop-in MPC85xx alternatives, and practical layout notes not assembled in the manufacturer datasheet, providing a faster path to design-in than searching individual distributor pages.

Cotação Contato