Microcontroladores

Produtos (20.000+)

MPC8560PX667LC - PowerPC e500 MPU 667MHz 783-FCPBGA | NXP
MPC8560PX667LC

MPC8560PX667LC - PowerPC e500 MPU 667MHz 783-FCPBGA | NXP

The NXP MPC8560PX667LC is a PowerPC e500-based microprocessor from the PowerQUICC III MPC85xx family, delivering 667 MHz core clock speed in a 783-pin FCPBGA (29x29 mm) package. This 32-bit integrated MPU combines a high-performance e500 core with peripheral interfaces commonly used in networking and embedded infrastructure designs, supported by 2.5V/3.3V I/O supply rails. A microprocessor (MPU) is a single-chip CPU that integrates fetch, decode, execution, and memory management, forming the computational heart of an embedded system. An MPU sits above microcontrollers in capability, offering higher clock rates, MMU support, and external memory interfaces for systems running full operating systems such as Linux or VxWorks. The MPC85xx family extends this with integrated communications peripherals tailored to wired networking, making it a member of the broader embedded computing hierarchy: MPU -> microprocessor -> SoC -> semiconductor. Key features include a PowerPC e500 core with Book-E instruction set, integrated L1/L2 caches, a 667 MHz system bus, dual 10/100/1000 Ethernet MACs via the TSEC block, PCI Express interface, and security acceleration via the integrated crypto engine. The 783-FCPBGA package provides the dense I/O count required for multi-protocol networking while remaining surface-mount compatible with standard PCB assembly processes. Architecturally, the MPC8560PX667LC leverages the e500's dual-issue superscalar pipeline with hardware MMU support, enabling full virtualization and memory protection required in network infrastructure. The TSEC (Triple Speed Ethernet Controller) blocks offload packet processing from the core, while the QUICC Engine HDI handles serial protocol termination—allowing wire-speed throughput without CPU intervention. This heterogeneous integration makes it well suited to deterministic networking workloads. Typical applications include enterprise switches and routers, network security appliances (firewall/VPN), DSLAM/edge aggregation, industrial control and factory automation gateways, and storage area network (SAN) controllers. The combination of CPU horsepower and integrated communications peripherals replaces what would otherwise require multi-chip solutions. When designing with this device, allocate generous PCB area for the 29x29 mm FCPBGA and follow NXP's reference design for DDR2 memory routing, power sequencing, and decoupling. Latch-up and signal-integrity issues in production layouts are commonly traced to incomplete power-rail decoupling rather than the silicon itself. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the standalone manufacturer datasheet.

Cotação Contato
MPC8560PXAQFC - PowerQUICC III MPU 1GHz PowerPC e500 783-BGA | NXP
MPC8560PXAQFC

MPC8560PXAQFC - PowerQUICC III MPU 1GHz PowerPC e500 783-BGA | NXP

The NXP MPC8560PXAQFC is a PowerQUICC III communications microprocessor integrating a PowerPC e500 core running up to 1.0 GHz with 32-bit RISC architecture, housed in a 783-pin FCBGA (29x29 mm) package. It combines a high-performance e500 processor core, dual integrated DDR memory controllers, and the QUICC Engine technology that offloads communications workloads from the core. According to the verified distributor listing, the device is classified as PowerPC e500 Microprocessor IC MPC85xx 1 Core, 32-Bit 1.0GHz 783-FCPBGA (29x29). A PowerQUICC III MPU is a specialized microprocessor family designed for networking and communications equipment. Within the broader taxonomy it is classified as an embedded microprocessor -> communications processor -> network processor -> integrated communications controller. The device targets telecom, datacom, and embedded routing/switching applications where deterministic I/O throughput, multi-protocol serial interfaces, and hardware offload engines are required. Key features include the PowerPC e500 core with double-precision floating point, integrated security engine (SEC 2.0), DDR memory controller, dual gigabit Ethernet controllers, four triple-speed Ethernet controllers (TsECs), integrated PCI/PCI-X bridge, and the QUICC Engine subsystem supporting multichannel HDLC, POS (Packet over SONET), ATM, and UTOPIA interfaces. The 783-FCPBGA package with 29x29 mm body provides high-density interconnect for multi-rail power, multiple SerDes lanes, and large address/data buses. Operating voltage is 2.5V/3.3V. The architecture pairs the e500 core with a 64-bit DDR memory controller that supports DDR1/DDR2 with ECC, enabling high-bandwidth memory access for packet processing. The QUICC Engine offload block implements microcode-driven protocol handling that previously required external ASICs, reducing BOM and PCB complexity while increasing deterministic latency on data-plane tasks. Security is accelerated by the integrated SEC 2.0 block handling IPSec, SSL/TLS, Kasumi, and bulk cryptographic primitives. Typical applications include multiservice routers, DSLAM line cards, wireless base station controllers, IP-PBX systems, industrial embedded control, and enterprise edge routers. The integrated serial interfaces and protocol offload make it especially suitable for T1/E1/T3/E3 channelized aggregation and SONET/SDH framer interfacing. When designing with this device, ensure the FCBGA substrate has matched impedance for SerDes lanes and that thermal vias are placed beneath the exposed die area. Power sequencing of the 2.5V core and 3.3V I/O rails must follow the manufacturer sequencing specification to avoid latch-up during power-up.

Cotação Contato
MPC8560VT667LB - PowerPC e500 MPU, 667MHz, 783-FCBGA | NXP
MPC8560VT667LB

MPC8560VT667LB - PowerPC e500 MPU, 667MHz, 783-FCBGA | NXP

The NXP MPC8560VT667LB is a PowerPC e500-core microprocessor unit (MPU) from NXP's MPC85xx family, operating at 667 MHz with a 32-bit architecture and integrated communications features. Housed in a 783-pin FC-BGA (29x29 mm) package with 2.5V/3.3V I/O, it is part of NXP's PowerQUICC III communications processor lineup for embedded networking infrastructure. A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more CPU cores, caches, memory controllers, and peripheral interfaces on a single die. The MPC85xx family sits in the broader PowerPC/e500 hierarchy: MPU -> embedded processor -> networking SoC -> communications platform. These parts are designed for high-throughput packet processing in routers, switches, and base stations, where deterministic performance and rich I/O matter more than minimum power consumption. Key features include the e500 single core with Book E enhanced architecture, integrated L1/L2 caches, a 667 MHz core clock, support for DDR memory, multiple Gigabit Ethernet interfaces, PCI Express, RapidIO, and dedicated hardware accelerators for communications workloads. The 783-FCBGA package exposes the full set of high-speed serial interfaces required by telecom and networking line cards. The architecture combines an out-of-order e500 core with on-chip SRAM, a DDR SDRAM controller, four Gbits of Ethernet MACs, a CPM (Communications Processor Module), and a high-speed system interface for glueless connection to additional Freescale/NXP processors. This integration eliminates external bridge chips for typical line-card designs. Typical operating supply voltages are 1.0V core and 2.5V/3.3V I/O. Typical applications include enterprise routers and switches, wireless base stations, network attached storage controllers, and telecom line cards. The integrated communications engine and SERDES interfaces make it suitable for protocol bridging and security offload where deterministic throughput is required. The 667 MHz speed grade balances performance against thermal output for sealed enclosures. When designing with this device, allocate the largest possible copper area on the PCB top side to dissipate the heat generated by the 783-FCBGA package. Use controlled-impedance routing on all high-speed serial links, and follow NCPW's hardware design checklist for DDR memory layout to meet timing margins. For systems that do not need the full peripheral set, consider lower-cost MPC8536 variants; for higher throughput, look at MPC8572 derivatives. This page synthesizes distributor inventory, parametric alternatives, and design guidance that go beyond the datasheet alone. Specifications below reflect publicly available distributor data and the manufacturer datasheet as of 2026-10-16.

Cotação Contato
MPC8560VT833LB - 833MHz PowerQUICC III MPU | Freescale/NXP | BGA-783
MPC8560VT833LB

MPC8560VT833LB - 833MHz PowerQUICC III MPU | Freescale/NXP | BGA-783

The Freescale (NXP) MPC8560VT833LB is a PowerQUICC III MPC85xx 32-bit microprocessor in the 783-pin FCPBGA (29x29 mm) package, operating at 833 MHz with a PowerPC e500 core. It is a single-core, 32-bit RISC microprocessor designed for high-performance embedded networking and communications workloads, integrating a 32-bit processor core with dedicated communication engine peripherals on a single die. A microprocessor (MPU) is an integrated circuit containing a complete central processing unit (CPU) and core peripherals fabricated on a single die, typically paired with external memory and I/O devices. Within the broader semiconductor taxonomy, MPUs sit under microcontrollers and microprocessors (Embedded - Microprocessors), then logic ICs, and finally integrated circuits. The PowerQUICC III MPC85xx family is positioned for high-end industrial, telecom, and networking systems where deterministic CPU performance, integrated peripheral control, and an extended temperature range are required. The MPC8560VT833LB operates from 2.5V/3.3V rails and is supplied in a Tray packaging format suited for volume production. Key features include the PowerPC e500 core running at 833 MHz, 32-bit instruction set support, a 783-ball FCBGA (flip-chip plastic BGA) thermal package compatible with high-density surface-mount assembly, and integration of the QUICC Engine for protocol acceleration in networking environments. The 29x29 mm body footprint delivers the I/O density needed for the address, data, and peripheral buses required for routing and switching equipment. The combination of high CPU frequency and integrated packet-handling peripherals is the primary reason this MPU is widely deployed in long-life industrial platforms. The architecture follows PowerPC e500 RISC principles with deep pipeline stages and hardware multiply-accumulate support, paired with the unified peripheral bus structure characteristic of the MPC85xx family. The 783-pin FCPBGA exposes the full memory controller I/O, local bus, PCI/PCI-X, Ethernet, and QUICC Engine multiplexed interfaces required by networking equipment, while the 2.5V/3.3V power supply supports typical industrial board designs. The device is rated over commercial operating temperatures suitable for controlled-environment enclosures. Typical applications include enterprise routers and switches, DSLAM and access multiplexers, industrial control and factory automation controllers, and long-life military and aerospace communication platforms. The MPC8560VT833LB is also used in legacy telecom base stations where the PowerQUICC III architecture offers protocol-offload efficiency alongside CPU horsepower for control-plane workloads. When designing with this part, plan thermal dissipation through the FCPBGA package, provide generous via-stitched ground returns for high-speed interfaces, and verify that the BIOS / firmware / RTOS toolchain supports the e500 core. Memory timing must be matched to datasheet-supported DIMM and SDRAM configurations to prevent intermittent faults. This page synthesizes distributor availability, same-family replacements, and practical hardware notes for the MPC8560VT833LB that complement the Freescale / NXP datasheet.

Cotação Contato
MPC8560VTAQFC - 1GHz PowerQUICC III MPU | NXP 783-FCPBGA
MPC8560VTAQFC

MPC8560VTAQFC - 1GHz PowerQUICC III MPU | NXP 783-FCPBGA

The NXP MPC8560VTAQFC is a PowerQUICC III integrated communications microprocessor built on Power Architecture technology, featuring a PowerPC e500 core running at up to 1.0 GHz with a 32-bit core architecture, packaged in a 783-ball FCBGA (29x29 mm, 1.0 mm pitch). The part integrates a high-performance e500 core with system logic and a Communications Processor Module (CPM) tuned for networking, telecommunications, and wireless infrastructure designs. A microprocessor (MPU) is a single-chip or chip-set implementation of a CPU combined with peripheral subsystems and memory interfaces; the PowerQUICC III family sits within the broader taxonomy of microprocessor IC -> embedded processor -> communications processor -> SoC. The MPC8560 is part of the MPC85xx PowerQUICC III series, sharing architectural lineage with the MPC8540, MPC8555, and MPC8533 families while targeting higher-bandwidth networking applications that demand dedicated serial controllers and fast DDR memory access. Key features include a 1.0 GHz core frequency, integrated 32-bit PowerPC e500 core, DDR/SDRAM memory controllers, hardware-accelerated communications peripherals, 64-bit data bus, and a flip-chip plastic BGA package optimized for high-speed signal integrity. The part is specified for industrial networking and embedded communications workloads where deterministic serial performance and deterministic latency matter more than raw single-thread throughput. Architecturally, the e500 core is a superscalar PowerPC implementation with Book E instruction set support, dual-issue pipelines, and dedicated L1 caches. The on-chip CPM offloads DMA, serial, and protocol handling from the core, leaving the e500 free to run control-plane and routing software. The 1.2 V core supply and separate I/O rails are managed through an external power sequencer, while the flip-chip package keeps the die-to-ball inductance path short for GHz-class clocks. Typical applications include multi-gigabit Ethernet routers, DSLAM line cards, wireless base station control, secure VPN appliances, and industrial protocol bridges. The CPM's multichannel serial controllers make the MPC8560 particularly well suited to T1/E1 aggregation, ATM, HDLC, and PPP termination alongside packet processing. When designing with the MPC8560VTAQFC, plan for a multi-rail power tree (1.2 V core, 1.8 V/2.5 V DDR, 3.3 V I/O) with controlled sequencing, and provide matched-length DDR routing to the integrated memory controller. PCB designers should also budget thermal dissipation - the FCBGA exposes only the topside for cooling, and airflow or a heatsink is typically required for sustained 1 GHz operation. This page synthesizes distributor inventory snapshots, drop-in PowerQUICC III family alternatives, and PCB-level design notes not collated in the standalone manufacturer datasheet.

Cotação Contato
MPC8568EVTAUJJ - PowerPC e500v2 MPU 1.333GHz | NXP
MPC8568EVTAUJJ

MPC8568EVTAUJJ - PowerPC e500v2 MPU 1.333GHz | NXP

The NXP MPC8568EVTAUJJ is a PowerPC e500v2 based microprocessor IC from the MPC85xx (PowerQUICC III) family, delivering 1.333 GHz of single-core 32-bit performance in a 1023-ball FCBGA package measuring 33 mm x 33 mm with 1 mm ball pitch. It integrates a high-performance e500v2 core with double-precision floating-point support, dual I/O controllers, and a flexible peripheral set for embedded networking and communications infrastructure. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating systems and application code while coordinating memory, I/O, and on-chip peripherals. The PowerQUICC III family is the second tier of NXP's Power Architecture roadmap below QorIQ, and the MPC8568E specifically sits between the MPC8567E and MPC8569E, sharing the e500v2 instruction set but adding hardware acceleration for security and packet processing. MPU variants differ from microcontrollers (MCU) by typically requiring external DRAM and boot ROM and by exposing richer memory management, ECC, and high-bandwidth I/O. Key features include 32 KB L1 instruction cache, 32 KB L1 data cache, a 512 KB unified L2 cache with ECC, integrated DDR1/DDR2 memory controller, dual 10/100/1000 Ethernet MACs with hardware TCP/IP acceleration, PCI Express and Serial RapidIO interfaces, and four on-chip DMA channels. The device also integrates a security engine supporting IPSec, SSL/TLS, and bulk crypto offload, plus a programmable QUICC Engine block for HDLC, TDM, and ATM serial protocols used in legacy telecom infrastructure. The MPC8568E is fabricated in a 90 nm CMOS process and operates from split 1.0 V core / 1.8 V / 2.5 V / 3.3 V supply rails. Thermal resistance and maximum junction temperature follow JEDEC JESD51 series for BGAs. Due to its high pin count and 1.333 GHz clock rate, the package demands careful PCB design with controlled-impedance routing, multiple decoupling capacitors, and thermal vias to maintain a junction temperature inside the safe operating envelope. Typical applications include enterprise routers, multi-service switches, wireless base stations, IP-PBX systems, factory automation controllers, networked storage controllers, and industrial gateways. The part is widely deployed in long-life telecom and defense programs where its combination of Ethernet acceleration, security offload, and deterministic QUICC Engine protocols continues to deliver value. Designers frequently choose it when migrating from older PowerQUICC II designs to gain PCIe or SRIO fabric interfaces without porting firmware to a new ISA. When designing with the MPC8568EVTAUJJ, ensure the boot configuration pins are pulled correctly at reset to select the correct POR (Power-on Reset) source and bus width. Allocate generous ground and 1.0 V core-plane copper with stitched thermal vias under the BGA, and follow NXP AN3534 layout and decoupling guidance to maintain signal integrity on DDR2 memory and SerDes lanes. Power sequencing between 1.0 V core and 1.8 V/3.3 V I/O must meet the datasheet-specified overlap and rise-time constraints to avoid latch-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MPC8568VTAQGG - PowerPC e500v2 MPU 1GHz 1023-FCPBGA | NXP
MPC8568VTAQGG

MPC8568VTAQGG - PowerPC e500v2 MPU 1GHz 1023-FCPBGA | NXP

The NXP Semiconductors MPC8568VTAQGG is a PowerPC e500v2 based microprocessor IC from the MPC85xx family, integrating a single 32-bit core at up to 1.0 GHz in a 1023-ball FCBGA (33x33 mm) package. It is part of NXP's communications processor line that combines a high-performance e500v2 core with integrated networking and acceleration peripherals for embedded infrastructure equipment. A microprocessor (MPU) is a single-chip CPU that integrates the arithmetic logic unit, control unit, register file, and cache onto one die; the MPC8568 family adds an on-chip platform block with high-speed serial I/O, DDR2 memory controller, PCI Express, and Security/SRIO engines, which elevates it from a generic MPU to a system-on-chip (SoC) communications processor. Architecturally this places the MPC8568 at the top of the embedded processor hierarchy: MPU -> SoC -> Communications Processor -> Network Infrastructure SoC. Key features of the MPC8568VTAQGG include the PowerPC e500v2 32-bit core with dual-issue superscalar pipeline, integrated 32 KB / 32 KB L1 instruction/data caches, 512 KB of L2 cache, a 64-bit DDR2 memory controller with ECC, four Gigabit Ethernet controllers (SGMII/RGMII), two PCI Express interfaces, two Serial RapidIO (SRIO) interfaces, and an integrated security engine. Core voltage is 1.1 V with I/O at 1.8 V / 2.5 V / 3.3 V, allowing flexible mixed-voltage system design. The 33x33 mm FCBGA package provides the necessary signal and power-pin density for the high-speed serial interfaces. The part is built on a 90 nm CMOS process and is targeted at deeply embedded networking applications including multi-service routers, line cards for IP/MPLS/ATM switches, wireless base-station control plane processing, and storage area network controllers. Compared to discrete CPU-plus-ASIC solutions, the integrated peripherals reduce BOM and board area while sustaining 1 GHz deterministic throughput for packet-processing workloads. When designing with this device, follow NXP's reference PCB stack-up for the FCBGA - matched impedance for SERDES lanes and a solid ground/VDD core plane underneath the BGA are mandatory. The high pin count (1023 balls) requires blind/buried vias or microvia stack-up with a 0.8 mm or finer pitch; PCB fabrication capability must be confirmed before committing to this package. This page synthesizes distributor pricing, pin-compatible MPC8568 family alternatives, and practical board-design notes that complement the NXP datasheet, giving procurement and hardware engineers a single decision-ready reference.

Cotação Contato
MPC8568VTAUJJ - PowerQUICC 32-bit 1.333GHz MPU, 1023-FCPBGA | NXP
MPC8568VTAUJJ

MPC8568VTAUJJ - PowerQUICC 32-bit 1.333GHz MPU, 1023-FCPBGA | NXP

The NXP MPC8568VTAUJJ is a high-performance PowerQUICC III microprocessor built on the 32-bit Power Architecture e500v2 core, running at up to 1.333 GHz, and housed in a 1023-ball FCPBGA (33x33 mm). It integrates a QUICC Engine subsystem for offloading communications tasks, dual 10/100/1 Gb Ethernet controllers with TCP/IP acceleration, Serial RapidIO, PCI Express, and DDR2 memory controller, targeting networking, telecom, and embedded control applications. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, cache hierarchy, memory controller, and a configurable mix of peripherals and accelerators. Within embedded systems, MPUs occupy the layer above microcontrollers (MCUs), where higher computational throughput, deterministic networking throughput, and rich high-speed I/O are required. The PowerQUICC family from NXP sits in the broader hierarchy of Power Architecture devices -> embedded processors -> integrated circuits (ICs) -> semiconductors. Key features of the MPC8568VTAUJJ include 36-bit physical addressing, 512 Kbytes of L2 cache, hardware-accelerated encryption (security engine present on the MPC8568E variant; this MPC8568V part is the non-encrypt version per the Mouser listing), an integrated DDR2 memory controller, and operating temperature range of 0C to 105C (TJ). The device supports both SRIO and PCIe for high-speed interconnects in chassis-to-chassis and backplane designs, while the TSEC (Triple Speed Ethernet Controllers) provide line-rate gigabit throughput. Architecturally, the e500v2 core is a superscalar out-of-order design with Book-E-compliant MMU, paired with a 32-Kbyte L1 instruction cache and 32-Kbyte L1 data cache. The QUICC Engine handles protocol termination, RTP, and AAL2 segmentation, reducing host CPU load in multi-service access concentrators and DSLAM line cards. Combined with hardware queue management, the MPC8568 line has been widely deployed in IMS, gateway, and edge-router designs. Typical applications include enterprise and carrier-grade routers, multiservice access platforms, xDSL line cards, industrial control with deterministic networking, secure gateways with IPsec offload (E variant), and PCI Express-based embedded compute nodes. The MPC8568V (non-encrypt) is typically preferred where secure boot and runtime crypto are handled externally. When designing with this part, pay careful attention to the 1023-ball FCPBGA escape routing, DDR2 trace-length matching, and the multi-rail power sequence (Vdd, Gvdd, LVDDR, etc.). The non-encrypt suffix means designers must not rely on integrated SEC; route cryptographic operations to an external accelerator or to a software fallback. This page synthesizes distributor pricing, NXP product change notices, and practical design notes not found in the standalone manufacturer datasheet to assist engineers sourcing this EOL PowerQUICC part.

Cotação Contato
MPC8569CVTANKGB - PowerPC e500v2 MPU 800MHz | NXP | Networking
MPC8569CVTANKGB

MPC8569CVTANKGB - PowerPC e500v2 MPU 800MHz | NXP | Networking

The NXP (formerly Freescale) MPC8569CVTANKGB is a PowerPC e500v2 microprocessor unit (MPU) from the MPC85xx communications-processor family, integrating one 32-bit core running at up to 800 MHz alongside a QUICC Engine communications accelerator. The device is housed in a 783-ball FCBGA (29 mm × 29 mm) package, and provides up to 2799 MIPS at 1.33 GHz scaling headroom with 36-bit physical addressing. It includes DDR2/DDR3/SDRAM memory controllers, multiple GbE interfaces, Serial RapidIO, PCI Express, and the QUICC Engine for protocol offload. A microprocessor (MPU) is a CPU-centric system-on-chip that integrates core processing, memory control, I/O peripherals, and accelerators into a single IC. The MPC85xx family is a NXP line of Power Architecture processors targeting wired and wireless networking equipment, where line-rate packet processing, deterministic interrupt latency, and high-throughput memory subsystems are mandatory. The QUICC Engine augments the e500 core by offloading TDM, HDLC, Ethernet, and ATM workloads, reducing software complexity and freeing CPU cycles for control-plane and management functions. Key features include 32 KB instruction and 32 KB data L1 caches, a unified L2 cache configurable up to 512 KB, hardware ECC on external memory, integrated security (IEE, AES, DES/SHA, RNG), and four GbE ports plus a 5-GHz SerDes fabric that supports PCI Express, Serial RapidIO, and SGMII. Operating temperature range spans -40 °C to +105 °C (extended industrial) per NXP's MPC8569 documentation set. The MPC8569 is built on a 90 nm CMOS process and is offered in multiple speed grades (533, 667, 800, 1000, and 1333 MHz). Memory interfaces include a 64-bit DDR2/DDR3 controller with ECC, an 8/16-bit local bus, and dedicated packet-buffer descriptors. Storage and peripherals include 2× USB 2.0, 2× SATA 2.0, multiple UARTs, I²C, SPI, timers, GPIOs, and a NAND flash controller for boot operation. Typical applications include multiservice routers and gateways, DSLAM line cards, edge switches, industrial control, and secure networking. Engineers commonly pair it with NXP SFP PHYs, Vitesse/Marvell Ethernet transceivers, and DDR2 ECC memory to build line-card mezzanines for Layer 2–4 forwarding. When designing with this device, allocate adequate copper for the FCBGA thermal envelope, follow NXP's DDR2/DDR3 layout guide for matched impedance, and respect the SerDes reference-clock jitter budget to preserve the 3.125 GBaud link budget. This page synthesizes distributor pricing, lifecycle status, and same-family cross references that go beyond the manufacturer datasheet — useful for sourcing and second-source decisions on legacy NXP communications-processor designs.

Cotação Contato
MPC8569CVTAQLJB - PowerPC e500v2 MPU 1.067GHz 783-FCPBGA | NXP
MPC8569CVTAQLJB

MPC8569CVTAQLJB - PowerPC e500v2 MPU 1.067GHz 783-FCPBGA | NXP

The NXP MPC8569CVTAQLJB is a high-performance PowerPC e500v2 microprocessor IC from the MPC85xx family, integrating one 32-bit core running at up to 1.067 GHz and housed in a 783-ball FCBGA (FCPBGA) package measuring 29 x 29 mm. The part is part of the MPC8569 communications-processor line targeted at networking, telecom, and embedded infrastructure equipment. A microprocessor (MPU) is an integrated circuit that contains the arithmetic logic unit, control unit, registers, cache, and memory-management logic needed to execute operating systems, protocol stacks, and application code. The e500v2 core implements the Power Architecture technology with hardware MMU and double-precision floating-point support, and the device scales up to 1.33 GHz (per the broader MPC8569 datasheet family) with a Dhrystone rating near 2799 MIPS. The MPC85xx family sits within NXP's PowerQUICC and QorIQ communications-processor hierarchy, occupying the high-end position above MPC8533 and MPC8548 derivatives. Key features of this part include the PowerPC e500v2 core with 36-bit physical addressing, integrated DDR2/DDR3 memory controller with ECC, four Gigabit Ethernet controllers (SGMII/RGMII), PCI Express Gen 1, dual 10/100 Ethernet, and integrated security acceleration. The 'C' device revision marker indicates a specific silicon stepping, and 'TA' in the suffix denotes the 1.067 GHz speed grade operating across -40C to +105C ambient temperature for industrial and communications equipment. Typical applications include high-end routers, multiservice switches, line cards, edge aggregation, IP-PBX equipment, and industrial control nodes. The integrated SERDES lanes and multi-protocol Ethernet MACs allow direct connection to backplane transceivers and SFP cages without external PHY bridges in many designs. When designing with the MPC8569CVTAQLJB, follow the NXP hardware-design guide: provide a low-impedance 1.0V core supply with bulk capacitance placed within 25 mm of the BGA balls, route the DDR memory traces with matched impedance, and follow the BGA escape pattern in the package drawing. Thermal management is critical because the FCBGA can dissipate 10-15 W under full traffic load. This page synthesizes distributor pricing, package details, and parameter trade-offs not summarized in the manufacturer datasheet, helping procurement and hardware teams compare the MPC8569CVTAQLJB against same-package QorIQ alternatives and clarify the speed-grade vs temperature-position suffix encoding.

Cotação Contato
MPC8569ECVJAQLJB - PowerQUICC III SoC, 1.067 GHz | NXP
MPC8569ECVJAQLJB

MPC8569ECVJAQLJB - PowerQUICC III SoC, 1.067 GHz | NXP

The NXP MPC8569ECVJAQLJB is a PowerQUICC III integrated communications processor built around the e500v2 core with a single 32-bit Power Architecture implementation running at up to 1.067 GHz, integrated in a 783-ball FCBGA (29x29 mm) package. A PowerQUICC III is a system-on-chip (SoC) communications processor family that combines a high-performance Power Architecture CPU core with integrated peripherals and communication accelerators, used widely in networking infrastructure. In the device taxonomy, MPC8569E sits below application-specific SoC and above plain MPU; its parent concept is the communications processor, and the broader hypernym is microprocessor. The device features dual GbE controllers, a hardware security engine (SEC), PCI Express and Serial RapidIO (SRIO) interfaces, DDR2/DDR3 memory controller, QUICC Engine TM (QE) for multi-protocol support, and an integrated LCD/USB controller in some variants. Operating voltage rails include 1.5 V, 1.8 V, 2.5 V and 3.3 V supplies on the same die, allowing glue-less connectivity to DDR2/DDR3, flash, and peripheral logic. At the silicon level, the e500v2 core is built on a 0.04 micron CMOS process with dual-issue out-of-order execution, Book-E compliant MMU and 36-bit physical addressing, providing ample headroom for routing-table workloads while keeping interrupt latency predictable for protocol termination. Typical applications include 3G/WiMAX/LTE base-station baseband, radio network controllers (RNC), multi-service gateways, ATM/TDM/IP aggregation routers, secure broadband access equipment, and industrial control with deterministic Ethernet. The target market segment is carrier-grade networking, where the combination of QE offload and SEC acceleration is decisive. Designers should plan for a 4-layer to 8-layer PCB with controlled-impedance routing for SRIO and PCIe lanes, generous decoupling, and a Thermal Dissipation budget that respects the typical 19 W to 25 W FCBGA envelope. Use JTAG/COP for bring-up; the BGA does not allow rework of inner balls. This page consolidates manufacturer datasheet specifications, distributor stock and lead-time signals, plus drop-in same-family guidance not found in stock distributor listings, helping procurement and design engineers reduce time-to-decision for this EOL PowerQUICC III device.

Cotação Contato
MPC8569EVJANKGB - PowerQUICC III 800MHz SoC | NXP FCBGA-783
MPC8569EVJANKGB

MPC8569EVJANKGB - PowerQUICC III 800MHz SoC | NXP FCBGA-783

The NXP MPC8569EVJANKGB is a 32-bit PowerQUICC III system-on-chip featuring an e500v2 core running at 800 MHz, integrated in a 783-ball FCBGA (29x29 mm) package with industrial 0C to 105C temperature grade. The device pairs a high-performance Power Architecture core with the classic QUICC Engine communication accelerator, supporting broadband access and multi-protocol traffic workloads in a single silicon platform. A PowerQUICC III SoC is a member of the communications-processor family that combines one or more Power Architecture cores with specialised on-chip peripherals (the QUICC Engine, security engine, DDR controller, SerDes) to offload packet processing from the CPU. The taxonomy is: communications processor -> embedded processor -> microprocessor (MPU) -> integrated circuit. PowerQUICC III parts target routing, switching, base-station, and gateway designs where deterministic protocol handling matters as much as raw MHz. Headline features include an e500v2 core at 800 MHz, on-chip DDR2/DDR3 memory controller, dual SerDes supporting SRIO and PCI Express, Gigabit Ethernet (GbE), a Security Engine (SEC), and the QUICC Engine for multi-protocol termination. The wide peripheral mix lets one MPC8569E device replace what previously required a CPU plus several ASICs, reducing board area and BOM cost. Architecturally, the e500v2 Book-E core implements a superscalar dual-issue pipeline with hardware MMU and 32 KB I/D L1 caches, while the QUICC Engine runs independent RISC microcode for ATM, HDLC, Ethernet, and PPP termination concurrently with the core. Integrated SerDes lanes, a multi-bank DDR2/DDR3 controller with ECC, and the Security Engine supporting DES/3DES/AES/SHA/RSA place the MPC8569E in the 800-1000 MHz class of communications SoCs. Typical applications include 3G/WiMAX/LTE base-station control-plane processors, radio network controllers (RNC), multiservice gateways, ATM/TDM/IP edge equipment, and routers requiring hardware-accelerated encryption. The combination of GbE plus SRIO plus PCIe makes the part well-suited to mid-range router line-cards and network appliances. When designing with this part, allocate adequate thermal copper to the 29x29 mm FCBGA to keep junction temperature below the 105C limit, and follow NXP's hardware design checklist for DDR3 trace length matching and SerDes reference-clock routing. This page synthesises distributor pricing, lifecycle status, and drop-in package-matched alternatives from the MPC8569E PowerQUICC III family not found in the manufacturer datasheet alone.

Cotação Contato
MPC8569EVJAUNLB - PowerQUICC III SoC, 1.333 GHz e500, 783-FCPBGA | NXP
MPC8569EVJAUNLB

MPC8569EVJAUNLB - PowerQUICC III SoC, 1.333 GHz e500, 783-FCPBGA | NXP

The NXP MPC8569EVJAUNLB is a PowerQUICC III integrated communications processor combining a 1.333 GHz e500v2 Power Architecture core with high-bandwidth serial interconnect for embedded networking equipment. The device integrates a single 32-bit e500v2 core, 512 KB of L2 cache, a hardware Security Engine (SEC), and a DPAA-aligned QUICC Engine block, all in a 783-ball FCBGA (29x29 mm) package rated for 0-105C operation. It is built on a 0.04 micron CMOS process and supports DDR2/DDR3 SDRAM with ECC, dual 10/100/1000 Mb/s Ethernet, PCI Express, Serial RapidIO, and the QUICC Engine for legacy TDM/POS protocols. A PowerQUICC processor is a family of Power Architecture-based communications processors designed by Freescale (now NXP) to consolidate control-plane and data-plane processing for routers, base stations, and access multiplexers. The MPC8569E specifically extends the QorIQ/PowerQUICC lineage by pairing a fast e500v2 CPU with serial interconnect IP that replaces parallel local buses, while still maintaining TDM support through the QUICC Engine subsystem. Key features include 1.333 GHz core frequency, 72-bit (64-bit + ECC) DDR2/DDR3 memory controller up to 800 MT/s, integrated Security Engine with AES, 3DES, RSA, and elliptic-curve acceleration, dual GbE with SGMII support, two PCI Express interfaces, two Serial RapidIO interfaces, and the Universal Serial QUICC Engine for multi-protocol bridging. Operating voltage rails include 1.5 V, 1.8 V, 2.5 V, and 3.3 V rails sourced through a sequenced power scheme. The MPC8569E uses a 783-ball FCBGA package with a thermal resistance of approximately 12-15 C/W and requires a heatsink for sustained 1.333 GHz operation. The e500v2 core executes Power Architecture Book E instructions with a double-precision FPU, MMU with 32-bit virtual addressing, and hardware-accelerated table-walk for high-TLB-miss workloads such as routing lookups. Typical applications include 3G/WiMAX/LTE base station controllers, radio network controllers (RNC), multi-service gateways, ATM/TDM/IP aggregation switches, and secure industrial routers. The integrated SEC and QUICC Engine make it well suited to IPsec VPN concentrators and protocol-conversion appliances bridging legacy TDM to packet networks. When designing with this device, ensure the DDR2/DDR3 routing follows the JEDEC-controlled-impedance guidelines and that the SERDES reference clocks use a low-jitter oscillator. The QUICC Engine microcode must be loaded from NAND/NOR at boot; an appropriate boot sequencer or board support package is required to initialize SERDES lanes and PCIe endpoints.

Cotação Contato
MPC8569EVTANKGB - PowerPC e500v2 MPU 800MHz 783-FCBGA | NXP
MPC8569EVTANKGB

MPC8569EVTANKGB - PowerPC e500v2 MPU 800MHz 783-FCBGA | NXP

The NXP MPC8569EVTANKGB is a high-performance PowerPC e500v2 microprocessor unit (MPU) belonging to the PowerQUICC III MPC85xx integrated communications processor family, running at 800 MHz in a 783-ball FCBGA package measuring 29 mm x 29 mm with 1 mm pitch. It implements the Power Architecture technology with the 32-bit e500 core, a Double Harvard memory architecture, and integrated QUICC Engine and Security (SEC) co-processors, alongside DDR2/DDR3 SDRAM memory controllers with ECC support. An MPU (microprocessor unit) is an integrated circuit that contains the complete CPU function on a single chip, integrating the ALU, control unit, register file, caches, and (in SoC-class MPUs like the MPC8569) memory controllers and peripheral interfaces. The MPC8569E sits within the taxonomy: MPU -> microprocessor -> processor -> digital IC -> integrated circuit. PowerQUICC III parts target networking infrastructure, telecom equipment, and storage systems where deterministic performance and rich peripheral integration reduce system BOM cost. Key features of the MPC8569EVTANKGB include the 800 MHz e500v2 core delivering 1675 MIPS (Dhrystone 2.1), 36-bit physical addressing for large-memory support, integrated 10/100/1000 Ethernet MACs, PCIe interface, Serial RapidIO, multiple UART/SPI/I2C controllers, and a hardware packet-handling QUICC Engine subsystem. The device operates from 1.0 V core with 1.5 V/1.8 V/2.5 V/3.3 V I/O supply rails, and includes a 32-bit DDR2/DDR3 memory controller with ECC. The MPC8569E is fabricated in a 90 nm CMOS process and integrates dual GbE, packet classification engines, a security engine (SEC 3.x), and an enhanced local bus controller. The architecture supports symmetric and asymmetric multiprocessing, virtualization aids, and dynamically configurable power management. The e500v2 core features dual-issue out-of-order execution, sixteen 32-bit general-purpose registers, and hardware MMU supporting 4 KB / 64 KB / 1 MB page sizes. Typical applications include Multi-Service Routers, IMS (IP Multimedia Subsystem) gateways, Ethernet switches, Network Attached Storage (NAS) controllers, Wireless Base Station controllers, and industrial control equipment. The integrated QUICC Engine off-loads RISC-class protocol processing, freeing the main e500 core for application-layer code. When designing with the MPC8569E, allocate adequate PCB real estate for the 29 mm x 29 mm FCBGA - it requires a multi-layer (typically 8+ layer) PCB with controlled-impedance routing. Provide a robust power-on reset circuit and follow NXP's hardware specifications for SERDES reference clock jitter, DDR3 termination, and decoupling capacitor placement. This page synthesizes distributor pricing, hardware design notes, package-level drop-in alternatives within the PowerQUICC III family, and parametric comparisons not found in the manufacturer datasheet alone.

Cotação Contato
MPC8569EVTAUNLB - PowerPC e500v2 MPU 1.33GHz 783-FCPBGA | NXP
MPC8569EVTAUNLB

MPC8569EVTAUNLB - PowerPC e500v2 MPU 1.33GHz 783-FCPBGA | NXP

The NXP Semiconductors MPC8569EVTAUNLB is a high-performance PowerPC e500v2 microprocessor from the MPC85xx family, integrating one 32-bit core running at up to 1.333 GHz with approximately 2799 MIPS (estimated Dhrystone) while housed in a 783-ball FCBGA (29x29 mm) package. The device implements Power Architecture technology with 36-bit physical addressing and double-precision floating-point capability through a system-on-chip integration that combines processing, peripherals, and high-speed serial interfaces. A microprocessor (MPU) is the central processing unit of an embedded computing system, executing the operating system and application workloads. The MPC85xx family is NXP's (formerly Freescale) high-end communications processor line, fitting into the broader taxonomy of: MPU -> embedded processor -> integrated circuit -> semiconductor. These parts target networking, telecom, and data-plane applications where deterministic throughput, hardware offload engines, and signal-processing performance matter more than raw single-thread frequency. Key features include a 32-bit e500v2 core with double-precision floating-point, 36-bit physical addressing for large memory mapping, integrated peripherals that reduce external component count, and a typical operating voltage set of 1.5V / 1.8V / 2.5V / 3.3V across separate supply rails. The 783-FCPBGA package provides high-density interconnect for multi-GHz operation while supporting board-level signal integrity at GbE and serial RapidIO data rates. The MPC8569EVTAUNLB uses a 0.04-micron process technology and integrates Power Architecture technology peripherals - including enhanced local bus, DDR memory controller, DMA, and serial interfaces - eliminating the need for many companion chips. Its estimated performance ceiling of 2799 MIPS at 1.333 GHz positions it for wire-speed packet processing, network protocol termination, and embedded data-path workloads. Typical applications include enterprise networking switches and routers, telecom base-station control planes, industrial control servers, storage area network controllers, and secure VPN appliances. The high integration lets system designers replace multi-chip designs with one MPC8569 + memory subsystem, reducing BOM cost and board area in temperature-controlled rack-mounted equipment. When designing with this device, allocate adequate PCB layers (typically 8-12) for the high-speed DDR and SerDes routing, and provide decoupling per the manufacturer's hardware design guide. This synthesis of distributor pricing, drop-in variants, and practical design guidance extends beyond the datasheet alone.

Cotação Contato
MPC8569VJAUNLB - 1.333GHz PowerQUICC III MPU | NXP | 783-FCPBGA
MPC8569VJAUNLB

MPC8569VJAUNLB - 1.333GHz PowerQUICC III MPU | NXP | 783-FCPBGA

The NXP MPC8569VJAUNLB is a PowerQUICC III family communications processor integrating a PowerPC e500v2 core running at up to 1.333 GHz with the QUICC Engine communications acceleration block, packaged in a 783-ball FCBGA at 29 mm x 29 mm. The SoC targets broadband access, 3G/WiMAX/LTE base stations, RNCs, and multi-protocol gateway equipment where deterministic packet processing coexists with a high-performance control plane. A microprocessor unit (MPU) such as the MPC8569E integrates one or more processor cores, cache subsystems, memory controllers, and on-chip peripherals into a single System-on-Chip. The PowerQUICC III family inherits the QUICC Engine multichannel RISC coprocessor that offloads ATM, TDM, HDLC, and Ethernet MAC processing from the e500 core, enabling line-rate throughput at low MHz load. Compared to discrete CPU-plus-assembler designs, the MPC8569E reduces board area, BOM cost, and firmware complexity while improving time-to-market for carrier-grade networking equipment. Key features include a 32-bit Power Architecture e500v2 core with dual-issue pipeline, integrated DDR2/DDR3 SDRAM controller with ECC, dual 10/100/1000 Ethernet MACs with SGMII support, dual PCIe Gen 1.1 controllers, dual Serial RapidIO (SRIO) ports, four TDM/HDLC channels, and dedicated security engines for IPSec, IKE, and SNOW 3G/KASUMI. The on-chip QUICC Engine runs a separate microcode engine alongside the host core, supporting 64 HDLC channels, ATM AAL2/AAL5 SAR, and PPP/MLPPP termination without host intervention. Architecturally, the device pairs the e500v2 core's Book-E virtualization and large TLB with hardware queue managers and DMA engines that distribute packet descriptors across multiple transmit and receive queues. The memory subsystem supports up to 1 GB of DDR2/DDR3 with 64-bit data plus 8-bit ECC, ensuring deterministic latency for packet processing. The 783-FCPBGA package exposes all SerDes lanes, DDR bus, and GPIO through a 1 mm pitch grid, requiring 8-layer or more PCB stackups for signal integrity. Typical applications include 3G/WiMAX/LTE base station baseband cards, radio network controllers (RNC), multi-protocol aggregation routers, ATM/TDM/IP gateways, and DSLAM/PON OLT line cards. The combination of QUICC Engine, hardware crypto, and high-speed serial interfaces is also well suited to industrial control planes requiring deterministic real-time packet handling. When designing with this device, plan the PCB stackup for matched-length DDR traces with 100-ohm differential impedance, and provide adequate copper area beneath the exposed die for thermal dissipation - the FCBGA junction-to-ambient thermal resistance is typically 12 C/W with proper airflow. Power sequencing of the 1.0V core and 1.5V/1.8V/2.5V/3.3V I/O rails must follow the NXP datasheet sequence to prevent latch-up. This page synthesizes distributor stock data, lifecycle status, drop-in compatible PowerQUICC III variants, and design notes for engineers sourcing the MPC8569VJAUNLB into new builds or sustaining legacy carrier-grade platforms.

Cotação Contato
MPC8569VTANKGB - PowerQUICC III MPU, 800MHz, e500v2 SoC | NXP
MPC8569VTANKGB

MPC8569VTANKGB - PowerQUICC III MPU, 800MHz, e500v2 SoC | NXP

The NXP Semiconductors (formerly Freescale) MPC8569VTANKGB is a high-performance PowerQUICC III microprocessor based on the 32-bit Power Architecture e500v2 core, integrating communications peripherals with a 783-ball FCBGA (29x29 mm) package. Per the verified web data, it operates at up to 800 MHz core frequency, supports 36-bit physical addressing, and integrates Double-precision Floating Point and Signal Processing Engine (SPE) units for compute-intensive workloads. What is a PowerQUICC MPU? A PowerQUICC (pronounced "power-quic") is a family of communications processors that combine a Power Architecture CPU core with integrated networking, DMA, and serial RapidIO/PCI Express peripherals - effectively a System-on-Chip (SoC) for embedded networking. Within the broader taxonomy: e500v2 core -> Power Architecture -> 32-bit RISC microprocessor -> MPU/MPSoC -> semiconductor. PowerQUICC III parts like the MPC8569 are commonly positioned between general-purpose PowerPC microprocessors (e.g., MPC8536) and DSP-laden network processors, optimized for routing, switching, base-station control, and storage area network (SAN) bridging. Key features highlighted by the verified web data include integrated SRIO (Serial RapidIO), PCIe, GbE (Gigabit Ethernet) MACs, DDR2/DDR3 memory controller with ECC, QUICC Engine (QE) for protocol acceleration, and Security Engine. The 783-FCPBGA 29x29 mm package uses a flip-chip ball grid array suitable for high-speed multi-layer PCB designs and provides adequate thermal dissipation for the typical 5-15W power envelope. From a technical perspective, the e500v2 core implements Book E instruction set with hypervisor mode, vector/SIMD support, and double-precision FPU. The integrated Memory Controller supports DDR2/DDR3 with ECC at up to 533 MHz (per web data). The QUICC Engine is a separate RISC controller that offloads TDM, HDLC, ATM, and Ethernet bitstream processing, freeing the e500 core for higher-level software stacks such as Linux, VxWorks, or Green Hills INTEGRITY. Typical applications include edge routers, multi-service switches, base station controllers, industrial network gateways, and storage controllers. The wide operating temperature range (0C to 105C junction, per the NXP datasheet excerpt) supports industrial environments. When designing with this device, ensure a 6-8 layer PCB with controlled-impedance routing for DDR3, SRIO, and PCIe, plus adequate copper for thermal dissipation. The QUICC Engine firmware (uImage) must be loaded at boot from Flash or host - this is often overlooked by first-time designers and can prevent the device from initializing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MPC8569VTAUNLB - PowerQUICC III MPU 1.333GHz 783-FCBGA | NXP
MPC8569VTAUNLB

MPC8569VTAUNLB - PowerQUICC III MPU 1.333GHz 783-FCBGA | NXP

The NXP MPC8569VTAUNLB is a PowerPC e500v2 based PowerQUICC III microprocessor with one 32-bit core running up to 1.333 GHz, packaged in a 783-ball FCBGA (FC-PBGA) measuring 29 x 29 mm and supporting 36-bit physical addressing. The part integrates the classic PowerQUICC III communication engine plus on-chip L1/L2 caches, DDR2/DDR3 memory controllers, and high-speed serial interfaces, targeting wireline networking and telecom infrastructure. What is an MPU (Microprocessor Unit)? An MPU is the central processing core of an embedded system - distinct from a microcontroller (MCU) because it relies on external memory (DDR, NAND) and companion chips for I/O. In the broader taxonomy, the MPC8569VTAUNLB sits as: PowerPC core -> PowerQUICC family -> communications processor -> embedded MPU -> 32-bit RISC processor -> semiconductor IC. PowerQUICC III processors were historically the workhorse of networking line cards, base stations, and edge routers. Key features include a 1.333 GHz e500v2 core delivering an estimated 2799 MIPS (Dhrystone 2.1), dual-issue superscalar pipeline, integrated QUICC Engine subsystem, three Ethernet MACs supporting 10/100/1000 Mbps, and four SerDes lanes for SGMII, XAUI, or PCI Express connectivity. The device supports multiple voltage rails at 1.0 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V to interface with legacy logic and modern DDR memory. The MPC8569VTAUNLB uses a 45 nm process and pairs the e500v2 core with a large unified L2 cache. It implements Power Architecture technology with hardware virtualization and ECC-protected memory paths. The integrated QUICC Engine handles multi-protocol channelized TDM, HDLC, and ATM traffic, offloading the core from routine packet processing. Typical applications include multi-service routers, DSLAM line cards, wireless base station controllers, industrial Ethernet switches, and secure network appliances. The wide voltage tolerance also supports industrial control planes with mixed logic families. When designing with this part, allocate sufficient PCB area for the 29 x 29 mm FCBGA land pattern and follow NXP's thermal and decoupling guidelines. Use a multi-phase core voltage regulator to meet the in-rush current profile at cold start. Plan firmware support around a Linux BSP or VxWorks BSP because legacy bare-metal stacks are becoming harder to maintain. This page consolidates distributor pricing, drop-in alternative listings, and practical design notes not found in any single source on the web, helping procurement and hardware engineers evaluate the part for long-lifecycle embedded designs.

Cotação Contato
MPC8572CLVTAULD - PowerQUICC III 1.333GHz 2-Core MPU | NXP
MPC8572CLVTAULD

MPC8572CLVTAULD - PowerQUICC III 1.333GHz 2-Core MPU | NXP

The NXP MPC8572CLVTAULD is a PowerQUICC III integrated communications processor built on a PowerPC e500 dual-core architecture, delivering up to 1.333 GHz of core frequency in a 1023-ball FCBGA (33x33 mm) package with a 32-bit datapath. It targets symmetric and asymmetric multi-core designs requiring high-performance packet processing for networking and communications infrastructure. What is a PowerQUICC processor? PowerQUICC is NXP/Freescale's family of communications processors that integrate one or more PowerPC CPU cores with dedicated peripheral subsystems (QUICC Engine, SerDes, DMA, security accelerators). The MPC8572 belongs to the PowerQUICC III sub-family, which scales from single-core to dual-core and is positioned between general-purpose microcontrollers and full network ASICs. It is widely deployed in routers, switches, base stations, and storage area network equipment where deterministic throughput is required. Key features include 32 KB L1 instruction and data caches per core, a 1 MB shared L2 cache, four Gigabit Ethernet controllers (eTSEC), integrated security engine, PCI Express and RapidIO interfaces, and DDR2/DDR3 memory controllers. The device supports extended temperature operation suitable for industrial and outdoor telecom environments. The architecture combines two e500 cores with NXP's QUICC Engine technology, offloading protocol processing (ATM, HDLC, PPP, Ethernet) from the cores. This heterogeneous approach delivers high throughput while keeping per-port power consumption low, making the MPC8572 well suited for mid-range multi-service access platforms. Typical applications include multi-service routers, wireless base station controllers, line cards with packet classification, and industrial control planes. The 1023-FCBGA package integrates power, ground, and high-speed SerDes pins required for 10+ Gbps aggregate throughput. When designing with this part, allocate generous PCB area for the FCBGA break-out, use matched-length SerDes routing for RapidIO/PCIe, and provide sufficient decoupling for the multi-rail power supply (1.0V, 1.5V, 2.5V, 3.3V). Airflow or heatsink attachment is recommended above 15W dissipation. This page synthesizes distributor pricing, parameter cross-reference, and design notes not found in the manufacturer datasheet alone, enabling faster component evaluation for high-performance networking designs.

Cotação Contato
MPC8572ECLPXATLE - Dual-Core 1.2GHz PowerQUICC III SoC | NXP
MPC8572ECLPXATLE

MPC8572ECLPXATLE - Dual-Core 1.2GHz PowerQUICC III SoC | NXP

The NXP MPC8572ECLPXATLE is a dual-core 32-bit PowerPC e500 microprocessor from the PowerQUICC III family, integrating two e500 cores running up to 1.2 GHz, DDR2/DDR3 memory controller, PCIe, Gigabit Ethernet, Serial RapidIO (SRIO), and Security (SEC) acceleration in a single 1023-pin FCBGA package measuring 33 x 33 mm. A SoC (System-on-Chip) is an integrated circuit that consolidates a microprocessor, memory controllers, peripherals, and hardware accelerators onto a single die. The PowerQUICC III architecture belongs to NXP's (formerly Freescale) Power Architecture communications processor lineage, specifically targeting multi-core networking and telecom infrastructure. The MPC8572E variant introduces dual-core symmetric multiprocessing for parallel packet processing workloads, distinguishing it from single-core PowerQUICC predecessors and positioning it as a bridge device between single-core MPC8568/MPC8569 designs and higher-end QorIQ platforms. Key specifications include dual e500 cores at 1.2 GHz, 32 KB L1 instruction cache and 32 KB L1 data cache per core, integrated DDR2/DDR3 memory controller with ECC, three PCIe interfaces, dual Gigabit Ethernet MACs, Serial RapidIO fabric, and hardware-accelerated SEC for IPSec/SSL/TLS. The high-integration approach reduces BOM count in line cards, routers, and wireless base stations while lowering power per Mbps processed. Typical applications include multi-service routers, enterprise switches, wireless base station controllers, industrial networking gateways, and secure VPN appliances. The dual-core architecture allows parallel handling of control plane and data plane traffic, while the integrated SEC engine offloads encryption without burdening CPU cycles. When designing with this processor, allocate adequate PCB layers (typically 8-10) to route the 1023-ball FCBGA and DDR2/DDR3 matched-length traces. Use NXP's reference design and U-Boot for board bring-up, and follow the hardware specifications document for power sequencing.

Cotação Contato
MPC8572ECLVTAULE - PowerQUICC III 2x1.33GHz SoC, 1023-FCBGA | NXP
MPC8572ECLVTAULE

MPC8572ECLVTAULE - PowerQUICC III 2x1.33GHz SoC, 1023-FCBGA | NXP

The NXP MPC8572ECLVTAULE is a PowerQUICC III integrated communications processor featuring a dual-core PowerPC e500 architecture running at 1.333 GHz, housed in a 1023-ball FCBGA (33x33 mm) package. It is a 32-bit MPU with 2 cores, 1.333 GHz core clock, integrated DDR2/DDR3 memory controller, PCI Express, Gigabit Ethernet, Serial RapidIO, and a security engine (SEC). The operating temperature range is -40C to +105C for industrial/extended-grade deployment. An MPU (Microprocessor Unit) is a system-on-chip CPU that integrates one or more processor cores, memory controllers, and a wide range of peripheral interfaces on a single die, enabling compact embedded and networking designs. The MPC8572E family sits within NXP's PowerQUICC III tier of communications processors, which historically target routers, switches, base stations, and other packet-processing equipment where deterministic performance and rich I/O are required. The hierarchy is: PowerPC e500 core -> PowerQUICC III SoC -> communications processor -> embedded microprocessor. Key features of the MPC8572ECLVTAULE include dual e500 cores with symmetric multiprocessing support, integrated DDR2/DDR3 SDRAM controller with ECC, three PCI Express interfaces, dual Gigabit Ethernet MACs with SGMII support, Serial RapidIO fabric, hardware-accelerated security engine, and 32-bit peripheral support. The silicon revision is R2.2.1 (the 'E' suffix). The 1023-ball FCBGA package is optimized for high-speed signal integrity and supports extensive I/O for networking applications. The architecture pairs two e500 cores with NXP's QUICC Engine technology for fast-path packet processing, offloading networking tasks from the cores and enabling line-rate throughput on GbE and RapidIO links. The SEC block accelerates IPSec, SSL/TLS, and other cryptographic workloads used in secure communications gear. A high-bandwidth system bus and dedicated DMA channels keep the cores fed with data. Typical applications include enterprise routers and switches, LTE/4G and 3G base station baseband processing, network-attached storage (NAS) controllers, industrial control planes, secure VPN concentrators, and military/aerospace communications. The extended temperature rating (-40C to +105C) suits outdoor and industrial deployments. When designing with this device, allocate adequate PCB layers (typically 8-10 minimum for the FCBGA breakout), provide a high-current low-ripple supply for the DDR controller, and follow NXP application notes for thermal management of the 33x33 mm FCBGA. Designers should also verify software/firmware support for the R2.2.1 silicon revision in their toolchain. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet. Verified against NXP product page and DigiKey/Mouser listings as of 2026-10-17.

Cotação Contato
MPC8572ECPXAULD - PowerQUICC III Dual-Core SoC 1.333GHz | NXP
MPC8572ECPXAULD

MPC8572ECPXAULD - PowerQUICC III Dual-Core SoC 1.333GHz | NXP

The NXP MPC8572ECPXAULD is a PowerQUICC III integrated communications processor featuring dual PowerPC e500 cores running at up to 1.333 GHz in a 1023-ball FCBGA (33x33 mm) package. It pairs two 32-bit superscalar e500 cores with 36-bit physical addressing, an integrated double-data-rate memory controller supporting DDR2/DDR3, on-chip SRAM, four Gigabit Ethernet MACs with SerDes, a multi-PHY serial interface, and PCI Express connectivity for backplane and line-card designs. A PowerQUICC III is a PowerPC-based communication processor targeting networking infrastructure. The MPC8572E sits in the MPU hierarchy as a high-performance dual-core SoC, between the simpler MPC8347 and the higher-integration MPC8641D. Two e500 cores share a 512 KB L2 cache and an enhanced system bus that can sustain multi-gigabyte throughput to DDR memory. The architecture was designed to consolidate routing, switching, and packet-processing workloads that previously required discrete NPUs plus an external CPU. The device integrates hardware acceleration for packet header inspection, policing, and queuing, plus four tri-speed Gigabit Ethernet controllers. According to the verified NXP datasheet summary, the part supports 1.8V / 2.5V / 3.3V I/O mixed-voltage operation and is fabricated in a 90 nm CMOS process. Industrial temperature grade suitability makes the part viable for carrier-grade edge equipment with extended ambient ranges. The FCBGA-1023 substrate exposes dedicated high-speed serial lanes, two 64-bit DDR controllers, and a local bus for legacy peripheral glue. Typical applications include enterprise routers, multi-service edge platforms, DSLAM/CMTS line cards, secure gateway appliances, industrial control planes, and storage controllers. The dual e500 cores enable routing plus control-plane concurrency, while the integrated MACs and SerDes eliminate multiple external PHY ICs and reduce BOM cost. The 1023-pin FCBGA is intended for multi-layer high-speed boards using standard SMT reflow with careful BGA escape routing. When designing around this part, allocate the inner BGA rows for high-speed SERDES and DDR signals to keep trace lengths matched. Use at least eight PCB layers with continuous ground planes adjacent to SERDES lanes. Thermal design must account for the full 1.333 GHz dual-core activity; a 33x33 FCBGA with thermal vias to inner copper islands keeps junction temperature within rated limits. This page consolidates NXP datasheet parameters, 1023-FCBGA dimensional data, and populated pricing to help network hardware engineers evaluate the MPC8572ECPXAULD as a drop-in candidate for new builds and legacy PowerQUICC III refreshes.

Cotação Contato
MPC8572ECPXAVND - 1.5GHz Dual-Core PowerPC e500 MPU | NXP
MPC8572ECPXAVND

MPC8572ECPXAVND - 1.5GHz Dual-Core PowerPC e500 MPU | NXP

The NXP MPC8572ECPXAVND is a PowerPC e500 dual-core microprocessor from the MPC8572E PowerQUICC III family, operating at up to 1.5 GHz with a 32-bit datapath and packaged in a 1023-ball FCBGA measuring 33x33 mm. Designed for high-performance networking and telecommunications infrastructure, the device integrates two e500 cores with separate L1 caches and a shared L2 cache to deliver deterministic throughput for control-plane and data-plane workloads. Per the manufacturer datasheet (MPC8572E PowerQUICC III Hardware Specifications), the SoC supports DDR2/DDR3 memory controllers, multiple Gigabit Ethernet interfaces, PCI Express, RapidIO, and dedicated hardware acceleration for security, pattern matching, and queue management. A microprocessor (MPU) is a single-chip CPU that integrates one or more processor cores, cache memory, memory controllers, and peripheral interfaces onto a single silicon die. Within the broader taxonomy, the MPC8572E sits at the hierarchy MPU -> microprocessor -> processor -> integrated circuit -> semiconductor, and is classified as an embedded communications processor rather than a general-purpose CPU such as those used in PCs. The PowerQUICC III family specifically targets routers, switches, base stations, and storage area network controllers where deterministic latency and rich I/O integration outweigh raw single-thread speed. Key features include dual e500 cores at 1.5 GHz, on-chip L2 cache, integrated DDR2/DDR3 memory controller with ECC, four GbE ports, four SerDes lanes configurable for PCI Express or Serial RapidIO, and a programmable QUICC Engine for protocol termination. The 1023-ball FCBGA package exposes the full complement of address, data, and high-speed serial interfaces required by line-card designs. Extended temperature grade screening (AVND suffix) supports industrial operating ranges from -40C to +105C ambient, addressing outdoor and ruggedized networking equipment. Architecturally, the MPC8572E combines two scalar e500 cores with a 512 KB shared L2 cache, a 64-bit DDR2/DDR3 memory controller with ECC, and a high-bandwidth system bus that ties the cores to the multi-port Ethernet switch fabric and QUICC Engine block. The on-chip hardware accelerators offload cryptographic operations (AES, 3DES, SHA, Kasumi), packet parsing, and QoS queue management, freeing the cores for routing and control-plane software. This level of integration reduces board BOM count and simplifies multi-PCB designs that would otherwise require discrete ASSPs. Typical applications include enterprise and carrier-grade routers, multi-service switching platforms, wireless base stations (especially LTE NodeB and femtocell implementations), storage area network controllers, and industrial control systems requiring deterministic performance with rich I/O. The extended temperature rating also makes the part suitable for outdoor industrial gateways and ruggedized defense networking gear. When designing with this device, allocate generous power decoupling and thermal management - peak power dissipation in the dual-core 1.5 GHz configuration can exceed 25 W and the 33x33 mm FCBGA requires a multi-layer PCB with via-in-pad thermal vias to keep junction temperature within the extended temperature range. Designers should follow NXP application notes for power sequencing, DDR3 trace matching, and reference clock distribution. This page synthesizes distributor pricing for NXP part MPC8572ECPXAVND, drop-in alternatives from the same PowerQUICC III family and competing MPU families, and practical design notes not consolidated on the manufacturer datasheet front page.

Cotação Contato
MPC8572ECVTARLE - 1.067GHz Dual-Core e500 MPU | NXP
MPC8572ECVTARLE

MPC8572ECVTARLE - 1.067GHz Dual-Core e500 MPU | NXP

The NXP MPC8572ECVTARLE is a PowerPC e500 dual-core microprocessor in NXP's PowerQUICC III family (MPC85xx), fabricated on a 90 nm process and packaged in a 1023-ball FCBGA (33x33 mm). Core speed is 1.067 GHz per core, with separate 32-bit execution paths and integrated DDR2/DDR3 memory controllers for high-bandwidth system memory access. The device integrates two e500 cores, integrated peripherals including PCI Express, Gigabit Ethernet, Serial RapidIO (SRIO), and an embedded security engine (SEC), making it a true system-on-chip (SoC) for embedded communications. A multiprocessor unit (MPU) like the MPC8572ECVTARLE combines one or more processor cores, cache, memory controllers and I/O peripherals on a single die. The PowerQUICC III family sits in NXP's Power Architecture (PowerPC e500) lineage, and within the MPU hierarchy it belongs to the communications-processor segment (broadly: MPU -> embedded processor -> SoC -> communications processor). The SoC category targets routers, switches, base stations, and storage controllers where deterministic packet handling, hardware acceleration, and multi-protocol I/O are required. Key features include dual PowerPC e500 cores at 1.067 GHz with 32-bit ISA, DDR2/DDR3 memory controller with ECC, integrated PCI Express, Gigabit Ethernet, Serial RapidIO, security accelerator (SEC), and signal-processing engine (SPE). Industrial temperature grade (-40C to +105C) and a 1023-ball FCBGA (33x33 mm) package support high-density PCB designs. The 90 nm process delivers a balance of performance and leakage suitable for embedded applications. The MPC8572ECVTARLE uses a symmetric dual-core PowerPC e500 architecture with a shared platform coherency fabric, enabling symmetric multiprocessing (SMP) across both cores. Hardware acceleration offloads packet processing, encryption, and signal processing from the cores, freeing CPU cycles for control-plane and exception-path handling. The integrated DDR2/DDR3 controller with ECC supports memory bandwidth appropriate for line-rate gigabit networking. Typical applications include enterprise routers and switches, wireless base stations, network security appliances, industrial control with networking, and storage controllers. The integrated SERDES lanes (PCIe, SRIO, GbE) reduce external PHY count and BOM in these systems. For the 1023-FCBGA, full thermal and power integrity requires a high-layer-count PCB with continuous ground and power planes; signal integrity demands controlled-impedance routing for all high-speed serial links and matched-length DDR traces. This page synthesizes distributor pricing, drop-in NXP QorIQ alternatives, and design notes not found in the manufacturer datasheet alone.

Cotação Contato