Microcontroladores

Produtos (20.000+)

PIC16LF19185-E/MV - 8-bit XLP MCU, 14KB Flash, 48-UQFN | Microchip
PIC16LF19185-E/MV

PIC16LF19185-E/MV - 8-bit XLP MCU, 14KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC16LF19185-E/MV is an 8-bit PIC microcontroller in the PIC16F191xx family with XLP (eXtreme Low Power) technology, 14 KB (8K x 14 words) of Flash program memory and a maximum CPU clock of 32 MHz. It is offered in a 48-pin UQFN (6 mm x 6 mm) package, integrating 1 KB RAM, 256 bytes EEPROM, an LCD driver, 12-bit ADC2, 5-bit/12-bit DAC, low-power comparator, PWM, CCP, CWG, SMT, ZCD, PPS, RTCC, HLT, WWDT, and PMD peripherals in a single die. A microcontroller (microcontroller unit, MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), working RAM, and programmable peripherals around a shared bus. PIC16F19185 devices belong to the mid-range 8-bit MCU family that maps directly into the broader embedded-controller taxonomy of microcontroller -> embedded controller -> semiconductor. They use a RISC-style Harvard architecture with a 14-bit instruction word, which keeps code density high and dynamic power low - one of the reasons PIC mid-range MCUs dominate coin-cell and battery-powered designs. Key features of this part include a 32 MHz internal oscillator, an on-chip LCD driver with charge pump, 12-bit ADC with computation (ADC2), zero-cross detection (ZCD), signal-measurement timer (SMT), complementary waveform generator (CWG), peripheral pin select (PPS) for flexible I/O mapping, and the eXtreme Low-Power (XLP) sleep modes that drop quiescent current into the sub-1 uA range. The 'LF' prefix indicates the wide Vdd operating range of 1.8 V to 3.6 V, suitable for two-AA and lithium primary cells. Architecturally, the device is built around Microchip's enhanced mid-range core with hardware multiply and a vectored interrupt controller, supported by a configurable clock tree (HFINTOSC, LFINTOSC, MFINTOSC, SOSC) and a 32 kHz secondary oscillator for RTCC operation. Integrated core peripherals and PPS let engineers route digital functions to almost any GPIO, simplifying PCB layout and reducing the BOM. Typical applications include battery-powered human-machine interface (HMI) panels, low-cost thermostats and appliance controls, IoT sensor nodes with LCD readout, handheld medical monitors, and consumer remote controls. The combination of LCD driver, ADC2 and XLP makes this family a strong fit for any design that must display data while running from a small primary cell for years. The 48-UQFN package is the right choice when the PCB has limited area but the design still needs >30 GPIO, more than 32 KB-class 8-bit MCUs typically offer in smaller packages. When designing with this part, always place the 0.1 uF Vdd decoupling capacitor within 3 mm of the Vdd pin and route the analog AVdd/AVss pair as a Kelvin connection. Ensure unused I/O are configured as outputs low to minimize leakage in XLP sleep modes. This page synthesizes the latest distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, optimized for engineers evaluating the PIC16LF19185-E/MV for new designs or as a pin-compatible replacement.

Cotação Contato
PIC16LF19185-I/PT - 8-Bit 32MHz 14KB Flash XLP MCU | Microchip
PIC16LF19185-I/PT

PIC16LF19185-I/PT - 8-Bit 32MHz 14KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF19185-I/PT is an 8-bit PIC16 microcontroller from the PIC16LF191xx family, featuring 32 MHz CPU speed, 14 KB Flash program memory, 1 KB RAM and 256 bytes of EEPROM, housed in a 48-pin TQFP (7x7 mm) package. It integrates eXtreme Low-Power (XLP) technology with a built-in charge pump for LCD drive, making it especially well-suited to battery-powered LCD applications. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path and a Harvard RISC core. Within the broader semiconductor taxonomy it sits below 16-bit and 32-bit MCUs and above fixed-function logic. PIC microcontrollers from Microchip are widely used for low-power, deterministic embedded control, and the PIC16LF191xx series extends that lineage with Core Independent Peripherals (CIPs) and Intelligent Analog that allow many tasks to run without CPU intervention. The 'LF' prefix denotes the low-power 'F' core variant optimized for 1.8V-3.6V operation. Key features include 14 KB self-programmable Flash, 1 KB SRAM, 256 bytes EEPROM, an integrated LCD driver with charge pump, a 12-bit ADC with Computation (ADC2), a 5-bit DAC, low-power comparator, zero-cross detect (ZCD), PWM, CCP, CWG (Complementary Waveform Generator), Peripheral Pin Select (PPS), Real-Time Clock/Calendar (RTCC), Windowed Watchdog Timer (WWDT), and Peripheral Module Disable (PMD) for granular power gating. The device supports up to 32 MHz internal oscillator operation. Architecturally, the PIC16LF19185 uses Microchip's enhanced mid-range 8-bit core with a hardware multiplier, 16-level stack and 49 instruction set. Core Independent Peripherals such as the CWG, ZCD and PWM allow hardware-driven waveform generation that frees the CPU for application logic, while the ADC2 with automatic averaging and threshold comparison further reduces firmware load. Typical applications include battery-powered LCD consumer devices, IoT sensor nodes with displays, industrial metering (gas/water/electricity), portable medical monitors with LCD readout, home automation HMI panels, and rugged low-power remote controls. The integrated LCD charge pump eliminates an external boost IC. When designing with this part, pair the integrated LCD charge pump with low-quiescent LCD bias capacitors and use Peripheral Pin Select to remap peripherals without PCB rework. Active clock gating and PMD can lower sleep current to sub-uA levels for multi-year coin-cell operation. This page synthesizes distributor pricing from 8 channels, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop parametric view of the PIC16LF19185-I/PT.

Cotação Contato
PIC16LF19185T-I/MV - 8-bit 32MHz 14KB Flash XLP MCU | Microchip
PIC16LF19185T-I/MV

PIC16LF19185T-I/MV - 8-bit 32MHz 14KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF19185T-I/MV is a low-power 8-bit PIC16 microcontroller featuring 14KB Flash program memory, 1KB RAM, and 256 bytes EEPROM, housed in a 48-pin UQFN (MV) 6x6 mm package. Operating up to 32 MHz, the device targets eXtreme Low Power (XLP) applications with nanoWatt technology and integrates a 12-bit ADC2, 5-bit DAC, LCD driver, comparators, PWM, and the Peripheral Pin Select (PPS) routing fabric. A PIC microcontroller is a Harvard-architecture RISC processor optimized for embedded control, deterministic interrupt response, and low-power operation. Within the Microchip taxonomy, this part belongs to the PIC16F191xx family, which sits between the smaller PIC16F1xxx and higher-pin PIC18F/dsPIC33 families; it is engineered for human-machine interface (HMI) products where an integrated LCD driver and rich analog peripherals reduce bill of materials. Key features include 43 digital I/O lines, up to 32 MHz internal oscillator, hardware Real-Time Clock/Calendar (RTCC), Complementary Waveform Generator (CWG), Zero-Cross Detection (ZCD), and SMT (Signal Measurement Timer). The nanoWatt XLP sleep currents are typically below 50 nA with RTCC retention, and the wide 1.8V-3.6V supply range supports single-cell Li-Ion or 2x AA battery topologies. The device is built on an enhanced mid-range core with 14-bit instruction word, 8-level hardware stack, and single-cycle 35 ns instruction execution. PPS allows digital peripherals to be remapped to virtually any I/O pin, simplifying PCB layout, while the CTMU provides capacitive touch and mTouch sensing capability for button replacement. Typical applications include battery-powered IoT sensor nodes, low-cost thermostats with LCD readouts, medical dosing pumps, and consumer remote controls. The integrated LCD controller directly drives segmented displays up to 128 segments, eliminating external driver ICs. When designing with this MCU, ensure that the 48-pin UQFN thermal pad is soldered to a sufficient copper pour to meet the 1.8V-3.6V brown-out reset threshold. Configuring PPS before enabling peripherals is mandatory to prevent spurious interrupts during startup. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
PIC16LF19185T-I/PT - 8-bit MCU 14KB Flash 32MHz 48-TQFP | Microchip
PIC16LF19185T-I/PT

PIC16LF19185T-I/PT - 8-bit MCU 14KB Flash 32MHz 48-TQFP | Microchip

The Microchip Technology PIC16LF19185T-I/PT is a PIC® XLP™ 16F family 8-bit microcontroller delivering 32 MHz CPU performance with 14 KB (8K x 14) of Flash program memory in a 48-pin TQFP (7x7 mm) surface-mount package. It belongs to the PIC16LF191xx series that combines a low-power eXtreme Low Power (XLP) architecture with integrated 12-bit ADC, 5-bit/8-bit DAC, PWM, and up to 43 I/O pins for sensor and HMI front-ends. A PIC microcontroller is an 8-bit RISC MCU based on a Harvard architecture with separate program and data buses, designed for deterministic real-time control with very low active and sleep currents. The PIC16 family sits between the smaller PIC10/PIC12 baseline parts and the 16-bit dsPIC®/PIC24 families, targeting low-power embedded control in consumer, industrial, and IoT applications. The LF prefix denotes the wide-voltage 1.8V-3.6V operating range typical of XLP battery-powered designs. Key features of the PIC16LF19185T-I/PT include 14 KB self-programmable Flash, 1 KB RAM, a hardware 12-bit ADC with automated Capacitive Voltage Divider (CVD) for touch and proximity sensing, multiple PWM modules with complementary outputs, on-chip 5-bit and 8-bit DACs, and a peripheral pin select (PPS) engine that remaps digital peripherals to any I/O. The XLP variant adds deep sleep currents below 100 nA typical with retention, suiting battery-operated sensor nodes that spend most of their lifetime in sleep. Architecture-wise, the device uses Microchip's enhanced mid-range 8-bit CPU core with a hardware multiplier, 16-level stack, and C-compiler friendly architecture (XC8). Internal oscillator accuracy is roughly ±2% over voltage and temperature, removing the need for an external crystal in many designs. The 48-TQFP package exposes up to 43 GPIO pins plus dedicated power, programming, and MCLR pins, giving engineers enough I/O for displays, keypads, motor PWM, and multiple analog channels. Typical applications include consumer HMI with mTouch® capacitive buttons and sliders, low-power IoT sensor nodes, small home appliances, battery-powered medical wearables, LED lighting controllers, and industrial sensor interfaces. The combination of CVD touch hardware, 12-bit ADC, DAC, and PWM makes the PIC16LF19185T-I/PT well-suited to mixed-signal front-ends that previously required multiple discrete ICs. When designing with this part, pay attention to the LF voltage range of 1.8V-3.6V (use the PIC16F19185 variant for 5V systems), route decoupling capacitors close to VDD/AVDD/VBAT pins, and program the unused I/O as outputs low to minimize sleep current. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical low-power design notes not consolidated on the manufacturer product page.

Cotação Contato
PIC16LF19186-I/PT - 28KB Flash 8-bit MCU, 32MHz, LCD | Microchip
PIC16LF19186-I/PT

PIC16LF19186-I/PT - 28KB Flash 8-bit MCU, 32MHz, LCD | Microchip

The Microchip Technology PIC16LF19186-I/PT is an 8-bit PIC16 microcontroller in the PIC16F19186 family, featuring 28KB (16K x 14) of Flash program memory, 2KB of SRAM, and 256 bytes of Data EEPROM in a 48-pin TQFP (7x7) package. The LF prefix denotes the low-voltage variant operating from 1.8V to 3.6V, while the I suffix indicates the industrial -40C to +85C temperature range. The device runs at up to 32MHz on the enhanced mid-range PIC16 core with a 14-bit instruction set, executing most instructions in a single cycle. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic control of low-power embedded systems. PIC microcontrollers sit within the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Compared with 32-bit Cortex-M parts, 8-bit PICs trade raw throughput for predictable interrupt latency, ultra-low sleep current, and small code footprint - making them a mainstay in battery-powered consumer, industrial sensor, and human-interface designs. Key features include an integrated LCD driver with charge pump, 12-bit ADC2 with computation, 5-bit DAC, low-power comparator, PWM, CCP, CWG, SMT, ZCD, PPS (Peripheral Pin Select), RTCC, and eXtreme Low Power (XLP) technology. The device exposes 43 I/O pins, supports up to 32MHz internal or external clock, and integrates Core Independent Peripherals that offload tasks from the CPU, reducing firmware complexity and active-mode current. Architecturally the PIC16LF19186 uses the enhanced mid-range core with a hardware multiplier and 16-level stack, complemented by a direct memory access path between the ADC and accumulator (ADC2 computation). The integrated segmented LCD controller supports up to 360 segments with variable bias and a charge pump that maintains contrast down to 1.8V, eliminating the need for an external bias generator. Typical applications include battery-powered LCD thermostats, household smart meters, medical glucose and infusion monitors, industrial sensor transmitters, IoT edge nodes with displays, and consumer remote controls. The wide peripheral set also fits automotive body controllers and HVAC panels when paired with the Q-graded variants. When designing with this part, reserve the PPS feature to remap digital peripherals after PCB layout, and budget the 256-byte EEPROM endurance of 100k write cycles for non-volatile parameter storage. Use the RTCC with an external 32.768kHz crystal for timekeeping; the part consumes under 1uA in RTCC retention mode, satisfying multi-year coin-cell lifetime targets. This page combines verified distributor pricing, drop-in same-package alternatives, and engineering design notes not assembled in the manufacturer datasheet alone, helping procurement and design teams accelerate the BOM decision.

Cotação Contato
PIC16LF19186T-I/MV - 28KB Flash 8-bit MCU with LCD | Microchip
PIC16LF19186T-I/MV

PIC16LF19186T-I/MV - 28KB Flash 8-bit MCU with LCD | Microchip

The Microchip Technology PIC16LF19186T-I/MV is an 8-bit PIC16 XLP family microcontroller delivering 32 MHz CPU performance with 28 KB Flash, 2 KB RAM, and 256 bytes of EEPROM in a 48-pin UQFN (6x6 mm) package. It is offered in the low-voltage 'LF' variant for 1.8V-3.6V operation and integrates an LCD driver, 12-bit ADC2, 5-bit DAC, low-power comparator, PWM, CCP, CWG, SMT, ZCD, PPS, and RTCC peripherals. An 8-bit microcontroller (MCU) is a programmable processor with an 8-bit data path, on-chip Flash program memory, RAM, peripherals, and I/O in a single IC. Within the broader taxonomy, it sits under microcontroller -> embedded MCU -> microprocessor -> semiconductor. The 'PIC' core is Microchip's proprietary Harvard RISC architecture; the 'LF' suffix indicates the low-voltage / low-power XLP family optimized for battery-powered designs. Compared with 32-bit Cortex-M0 MCUs, the PIC16L line targets simpler, deterministic, low-power applications where code density, peripheral integration, and BOM cost matter more than raw MIPS. Key features include 32 MHz operation from 1.8V to 3.6V, 28 KB self-programmable Flash with device ID/protect, 2 KB SRAM, 256 B EEPROM, an integrated LCD driver for up to 288 segments, a 12-bit ADC with charge pump, and the XLP eXtreme Low-Power technology with sleep currents in the nanoampere range. Core Independent Peripherals (CIPs) such as CWG, SMT, ZCD, and configurable logic cells allow functions to run without CPU intervention, reducing firmware burden and active current. Architecturally the device pairs a 14-bit instruction-word PIC core with a wide peripheral set including Peripheral Pin Select (PPS) for flexible I/O mapping, RTCC for real-time clocking, and PWM/CCP for motor and lighting control. The integrated charge pump enables LCD operation below 3V without external boost components. Typical applications include battery-powered LCD thermostats and utility meters, IoT sensor nodes with segment displays, low-power medical monitors (e.g. glucose meters), consumer white goods with LCD UI, and industrial HMI panels. The wide peripheral mix suits designs needing analog sensing, timekeeping, and display drive in a single chip. When designing, verify that the chosen UQFN-48 footprint (0.4 mm pitch, 6x6 mm body with exposed pad) matches your PCB land pattern; the 'MV' suffix specifically designates UQFN, not the TQFP or QFN alternatives in this family. Plan for ICD/ICSP programming headers and review MPLAB X IDE compatibility for XC8 compiler support. This page synthesizes distributor pricing, drop-in same-package alternatives from the Site MPN list, and practical design notes not aggregated in the manufacturer datasheet.

Cotação Contato
PIC16LF19186T-I/PT - 8-Bit XLP MCU, 28KB Flash, 48-TQFP | Microchip
PIC16LF19186T-I/PT

PIC16LF19186T-I/PT - 8-Bit XLP MCU, 28KB Flash, 48-TQFP | Microchip

The Microchip PIC16LF19186T-I/PT is an 8-bit PIC16 microcontroller from the PIC® XLP™ 16F family featuring 28KB (16K x 14) of Flash program memory, 2KB of SRAM, and a maximum CPU clock of 32MHz, housed in a 48-pin TQFP (7x7 mm) package. The "LF" prefix denotes the low-voltage variant that operates from 1.8V to 3.6V, while the "F" version (PIC16F19186) extends operation up to 5.5V for 5V-tolerant systems. The suffix "T" indicates Tape & Reel packaging, "I" denotes the -40C to +85C industrial temperature range, and "/PT" identifies the 48-TQFP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, communication interfaces (UART, SPI, I2C), analog-to-digital converters (ADC), and I/O pins. The PIC16 architecture uses a modified Harvard RISC core, which separates program and data buses for predictable instruction timing. Within Microchip's portfolio, PIC16 sits between the PIC10/12/14 entry-level families and the PIC18 high-performance 8-bit family; battery-powered MCU applications typically pair PIC16LF devices with XLP (eXtreme Low Power) peripherals for sleep currents in the nanoamp range. The PIC16LF19186T-I/PT integrates XLP low-power technology with Core Independent Peripherals (CIPs) including CWG, NCO, and PWM, plus an integrated LCD driver with charge pump and high-current I/Os. It features a 12-bit ADC2 with computation (ADC^2), two 10-bit DACs, and a comprehensive set of communication peripherals. Designed for ultra-low-power battery applications, it supports sleep currents as low as 30 nA with RTC and an operating current of approximately 35 uA/MHz, which directly extends battery life in portable designs. Typical applications include battery-powered LCD instrumentation (utility meters, portable medical devices), IoT sensor nodes, automotive body controllers, low-power industrial sensors, consumer wearables, and remote control units. The integrated charge pump and high-current I/O make the part especially suited for direct LED drive and segmented LCD glass. When designing with this MCU, ensure your toolchain supports the PIC16F191xx device ID. MPLAB X IDE with XC8 compiler is the canonical development environment. Provide a stable decoupling network (100 nF + 10 uF) near each VDD pin pair and route the ICSP clock/data lines so they remain accessible for in-circuit programming on the production board. This page synthesizes distributor pricing for PIC16LF19186T-I/PT, drop-in alternatives within the PIC16LF191xx family, and practical design notes not found in the datasheet summary.

Cotação Contato
PIC16LF19195-E/MR - 8-bit 32MHz XLP MCU 14KB Flash LCD | Microchip
PIC16LF19195-E/MR

PIC16LF19195-E/MR - 8-bit 32MHz XLP MCU 14KB Flash LCD | Microchip

The Microchip Technology PIC16LF19195-E/MR is an 8-bit PIC microcontroller from the PIC16F19195/6/7 64-pin family, featuring 14KB (8K x 14) of Flash program memory, 1KB of SRAM, and 256 bytes of EEPROM. It executes instructions at up to 32 MHz via the internal HFINTOSC, integrates an LCD driver with charge pump, and is housed in a 64-pin 9x9 mm QFN package designated by the /MR suffix. The "LF" prefix indicates a wide 1.8V to 3.6V operating range tuned for low-voltage, battery-friendly designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU core, non-volatile program memory, working RAM, and a mix of analog and digital peripherals. The PIC16 family uses a RISC-style Harvard architecture that executes most instructions in one oscillator cycle, giving the PIC16LF19195-E/MR roughly 8 MIPS at its 32 MHz top speed. It sits inside the larger power-management-aware hierarchy of eXtreme Low-Power (XLP) PIC MCUs and shares a toolchain (MPLAB X IDE + XC8) with all modern PIC16 devices. Key features include eXtreme Low-Power (XLP) operation with active current typically below a few hundred µA/MIPS, an integrated LCD driver with selectable charge pump and high-current segment pins for direct backlight driving, a battery-backed Real-Time Clock/Calendar (RTCC), and Core Independent Peripherals (CIPs) such as CWG, CCP, PWM, SMT and ZCD that offload timing tasks from the core. The 12-bit ADC2 with internal channels, a 5-bit DAC, low-power comparators (LP COMP) and Peripheral Pin Select (PPS) provide flexible analog and pin routing. The 64-pin QFN exposes up to 58 I/O with PPS remapping. Typical applications include battery-powered thermostats and utility meters, remote controls and home automation keypads with segmented LCD, medical monitoring handhelds (glucometers, pulse oximeters), industrial sensor transmitters with RTCC-stamped logs, and IoT edge nodes driving small character displays. The LCD charge pump lets the design keep the display active even when the battery voltage falls below the LCD threshold. When designing with this part, budget 1 square inch of copper under the exposed pad for thermal relief, keep analog traces short, and place the 0.1 µF VDD bypass cap within 3 mm of the supply pin. Use MPLAB X IDE with the XC8 compiler and select the appropriate Low-Power Sleep mode (Retention Sleep vs. full Sleep) to fully exploit the XLP benefit in battery applications.

Cotação Contato
PIC16LF19195T-I/PT - 8-Bit 32MHz XLP MCU 14KB Flash LCD | Microchip
PIC16LF19195T-I/PT

PIC16LF19195T-I/PT - 8-Bit 32MHz XLP MCU 14KB Flash LCD | Microchip

The Microchip Technology PIC16LF19195T-I/PT is an 8-bit PIC microcontroller in the PIC® XLP™ 16F family featuring 14KB (8K x 14) flash program memory, 32 MHz maximum CPU speed, and a 64-pin TQFP (10x10 mm) package. The 'LF' prefix indicates the extended low-power (XLP) silicon process that supports operation down to 1.8V supply while retaining the full peripheral set. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a range of integrated peripherals. The PIC16F family uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, sitting hierarchically between baseline PIC10/12 devices and the higher-performance PIC18 and dsPIC families. The XLP variants add nanoWatt technology with multiple low-power sleep modes (typically sub-uA idle) that allow battery-powered designs to last years on a single cell. Compared with 32-bit Cortex-M parts, 8-bit PIC MCUs trade raw throughput for deterministic interrupt response, simpler toolchains, and lower cost. Key features include 1KB RAM, 256 bytes EEPROM, an integrated LCD driver with charge pump, 12-bit ADC with computation (ADC2), a 5-bit DAC, low-power comparators (LP COMP), multiple PWM/CCP/CWG channels, zero-cross detection (ZCD), peripheral pin select (PPS), and a battery-backed Real-Time Clock/Calendar (RTCC). High-current I/O pins are designed to directly drive LED backlighting without external transistors. Core Independent Peripherals (CIPs) such as CWG, NCO, and SMT off-load tasks from the CPU. Architecturally the device uses a Harvard memory layout with separate program flash and SRAM buses, hardware stack, and 31 kHz LFINTOSC plus 16 MHz HFINTOSC internal oscillators. The internal voltage reference and charge pump allow display operation from a single 1.8-3.6V supply. Intelligent analog integration (ADC2 with oversampling and filtering) reduces the external signal-conditioning BOM. Typical applications include battery-powered IoT sensor nodes with LCD displays, electronic shelf labels, medical glucose/thermometer meters, portable consumer appliances, and industrial HMI panels. The wide operating range and integrated LCD make it ideal for any mains-or-battery product that needs a segmented display without an external driver IC. When designing, reserve adequate decoupling (100 nF + 1 uF) close to VDD/AVDD pins, and follow Microchip AN1365 (LCD layout) for the SEG/COM routing to minimize ghosting. This page combines distributor pricing, drop-in alternatives, and design guidance not found in the manufacturer datasheet alone.

Cotação Contato
PIC16LF19196-E/5LXVAO - 28KB Flash 8-bit XLP LCD MCU | Microchip
PIC16LF19196-E/5LXVAO

PIC16LF19196-E/5LXVAO - 28KB Flash 8-bit XLP LCD MCU | Microchip

The Microchip Technology PIC16LF19196-E/5LXVAO is an 8-bit PIC16 XLP flash microcontroller featuring 28KB (16K x 14) of program memory, 2KB of SRAM, and 256 bytes of EEPROM in a 64-pin VFQFN exposed-pad (9x9) package. It operates from a wide 1.8V to 3.6V supply, includes an integrated LCD driver with charge pump, and supports AEC-Q100 automotive-grade qualification for safety-critical applications. The device runs the enhanced mid-range PIC16 CPU at up to 32MHz and provides a rich Core Independent Peripheral (CIP) set for low-power, mixed-signal designs. A microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory (SRAM), and a configurable set of digital and analog peripherals. Within the broader taxonomy, the PIC16LF19196 sits in the PIC16 mid-range family -> 8-bit RISC microcontroller -> MCU -> embedded microcontroller -> semiconductor. Compared with 16-bit or 32-bit Cortex-M parts, an 8-bit PIC16 lowers cost, code complexity, and active current, while still providing enough throughput for sensor hubs, HMI, and battery-powered LCD applications. Key differentiating features include Microchip's eXtreme Low-Power (XLP) technology with deep-sleep currents below 1 uA, an integrated LCD charge pump that simplifies glass drive from a single lithium cell, and CIP analog blocks such as 12-bit ADC, 5-bit DAC, comparators, and zero-cross detection. The 64-VQFN footprint with exposed pad supports thermally robust layouts for high-current I/O segments and reduces PCB area versus 64-pin TQFP when board real estate is constrained. On the architecture side, the PIC16LF19196 combines a 14-bit instruction word, a hardware multiplier, and a peripheral pin-select (PPS) engine that allows remapping of digital functions to optimize PCB routing. The 32MHz oscillator with 4x PLL equivalent provides deterministic interrupt latency critical for motor control loops, while the integrated charge pump and high-current I/O eliminate external DC-DC and segment-driver components in LCD user interfaces. Typical applications include battery-powered LCD thermostats, IoT sensor nodes with always-on displays, automotive dashboard indicators, medical infusion pumps, metering and instrumentation with segment LCDs, and ultra-low-power HMI keypads. The combination of XLP sleep current and integrated LCD drive makes the part especially attractive for products that need years of coin-cell life with a live alphanumeric or graphical segment display. When designing with this part, ensure the exposed pad is soldered to a sufficient copper pour (at least 1 square cm) so junction temperature stays within the -40C to +125C automotive range under full I/O loading. The PPS feature should be assigned early in the schematic to avoid pin-function conflicts in the 64-VQFN footprint, and unused pins must be tied to defined logic states (not left floating) for robustness in AEC-Q100 systems. This page consolidates distributor pricing, automotive-grade drop-in alternates, and design notes that complement the manufacturer datasheet for engineers sourcing automotive-grade PIC16 XLP LCD microcontrollers.

Cotação Contato
PIC16LF19196-E/MR - 28KB Flash XLP 8-bit MCU | Microchip
PIC16LF19196-E/MR

PIC16LF19196-E/MR - 28KB Flash XLP 8-bit MCU | Microchip

The Microchip Technology PIC16LF19196-E/MR is a 32 MHz 8-bit RISC microcontroller featuring 28 KB (16K x 14) of self-programmable Flash program memory and an integrated LCD driver, housed in a 64-pin QFN (9x9 mm) package. It belongs to the PIC16(L)F1919x family and combines the eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) and intelligent analog, targeting battery-powered LCD applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and I/O. Within the broader taxonomy, this part is a low-power 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor IC. The 'LF' prefix denotes the 1.8V-3.6V low-voltage variant of the PIC16 family, allowing direct operation from a single lithium cell or two AA cells, while the non-LF 'F' variant extends to 5.5V for regulated-rail designs. Key features of the PIC16LF19196-E/MR include 2 KB RAM, 256 bytes EEPROM, 12-bit ADC with 5-bit DAC reference support, zero-cross detect (ZCD), complementary waveform generator (CWG), signal measurement timer (SMT), peripheral pin select (PPS), real-time clock/calendar (RTCC), hardware limit timer (HLT), windowed watchdog timer (WWDT), and peripheral module disable (PMD). The integrated charge pump and high-current I/O drivers support direct LCD glass connection without external bias circuitry. The device uses Microchip's enhanced mid-range 8-bit core with a hardware multiply and 49-instruction set, executing one instruction per 2 system clock cycles at 32 MHz (8 MIPS effective). Its nanoWatt XLP technology provides sleep currents below 100 nA typical with RTCC retention, making it one of the lowest-power PIC16 devices in its class. Typical applications include battery-powered blood glucose meters, wireless environmental sensor nodes with LCDs, industrial panel meters, smart thermostats, e-bike dashboards, IoT edge nodes with display feedback, and handheld medical devices where long battery life and on-glass LCD drive are mandatory. The 59 available I/O lines support keypad scanning and segment multiplexed LCDs simultaneously. When designing with this part, choose the LF variant for 1.8V-3.6V battery systems; use the F variant only when a regulated 5V rail is available. Verify LCD bias network sizing using the Microchip AN1365 application note, and confirm segment/commons match the package pinout (the 64-QFN provides up to 59 I/O plus dedicated LCD SEG/COM). Use MPLAB X IDE with XC8 compiler for firmware development. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in same-brand and cross-brand alternatives, and practical design notes not found in the bare manufacturer datasheet.

Cotação Contato
PIC16LF19196-E/PT - 8-bit 32MHz XLP LCD MCU 28KB Flash | Microchip
PIC16LF19196-E/PT

PIC16LF19196-E/PT - 8-bit 32MHz XLP LCD MCU 28KB Flash | Microchip

The Microchip Technology PIC16LF19196-E/PT is an 8-bit PIC16 microcontroller from the XLP family that combines eXtreme low-power operation with integrated LCD drive and Core Independent Peripherals (CIPs), housed in a 64-pin TQFP (10x10 mm) package. It runs at up to 32 MHz, integrates 28 KB of Flash program memory (16K x 14 words), 2 KB of RAM, and 256 bytes of EEPROM, and supports 59 digital I/O lines for sensor and user-interface connectivity. The -E suffix designates the -40C to +125C extended operating temperature range required for industrial and automotive-grade applications. An 8-bit PIC microcontroller is a RISC-based, Harvard-architecture embedded processor that executes one instruction per clock cycle (except branches) and is positioned in Microchip's product hierarchy as PIC -> PIC16 -> PIC16F19xx -> XLP family. The 'LF' in the part number indicates the low-power F-version core, which supports lower Vdd operation than the standard F variant, while 'XLP' (eXtreme Low Power) is Microchip's branded low-power technology family targeting battery-powered and energy-harvesting designs. The integrated charge pump and high-current I/O make this sub-family especially suited for battery-powered LCD applications where discrete LCD bias generation would otherwise inflate BOM cost. Key features include a 12-bit ADC with computation (ADC2), a 5-bit/10-bit DAC, low-power comparators (LP COMP), PWM, CCP, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), ZCD (Zero-Cross Detect), Peripheral Pin Select (PPS), RTCC (Real-Time Clock Calendar), Hardware Limit Timer (HLT), Windowed WWDT, and PMD (Peripheral Module Disable). The 32 MHz internal oscillator plus integrated LCD driver (up to 288 segments) make this part well suited for low-power graphical or segment LCD products. Technical depth: the LF core operates from 1.8 V to 3.6 V (down to 1.8 V at 16 MHz, 2.5 V to 3.6 V at 32 MHz) with a typical sleep current in the nanoampere range thanks to XLP technology. The 12-bit ADC2 provides automated averaging, accumulation and threshold comparison without CPU intervention (CIP), freeing the core for power management tasks. PPS allows most digital peripherals to be remapped to a wide selection of I/O pins, simplifying PCB routing on densely-populated 64-pin designs. Typical applications include battery-powered medical devices, industrial sensor transmitters, IoT edge nodes, home-automation HMI panels, smart thermostats, and low-power metering. The integrated LCD driver makes it especially attractive for appliances and instruments with segment displays. Design consideration: pair the MCU with a CR2032 or two AA cells via a boost regulator to leverage XLP sleep currents below 1 uA; verify LCD contrast across temperature and confirm PPS mapping for all peripherals during firmware bring-up.

Cotação Contato
PIC16LF19196-I/PT - 32MHz 8-bit XLP MCU, 28KB Flash, 64-TQFP | Microchip
PIC16LF19196-I/PT

PIC16LF19196-I/PT - 32MHz 8-bit XLP MCU, 28KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC16LF19196-I/PT is an 8-bit PIC16 microcontroller from the PIC® XLP™ 16F family, featuring 32 MHz CPU speed, 28 KB (16K x 14) of Flash program memory, and housed in a 64-pin TQFP (10x10 mm) package. It is purpose-built for low-power, battery-driven applications requiring integrated LCD drive, intelligent analog, and Core Independent Peripherals (CIPs). An 8-bit microcontroller (MCU) is a microprocessor with an 8-bit data bus, typically combining a CPU, RAM, Flash, and peripherals on a single die. The PIC16 family sits within Microchip's broader PIC® product hierarchy (PIC10/12/16/18/24/dsPIC33), positioned as the mainstream mid-range MCU family below PIC18 in performance but above baseline PIC10/12 in peripheral integration. 8-bit MCUs remain the workhorses of cost- and power-sensitive embedded designs where 32-bit ARM Cortex-M devices are overkill. Key features of the PIC16LF19196 include eXtreme Low-Power (XLP) technology with deep-sleep currents in the nanoamp range, an integrated charge pump for LCD bias generation, high-current I/O capable of directly driving backlight LEDs, and battery backup of the on-chip Real-Time Clock/Calendar (RTCC). The 64-pin TQFP package exposes 54 I/O pins, providing abundant connectivity for keypad, display, and sensor interfaces in human-machine interface designs. On the analog side, the device integrates a 12-bit ADC with computation (ADC2), a 5-bit/10-bit DAC, a low-power comparator, zero-cross detect (ZCD), and a peripheral touch controller. CIPs such as CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), PWM, CCP, and PPS (Peripheral Pin Select) offload timing-critical tasks from the CPU, reducing firmware complexity and power consumption. Typical applications include battery-powered blood-glucose meters, thermostatic radiator valves, electronic shelf labels, smart thermostats, industrial sensor transmitters, and wearable medical devices where long battery life and on-board LCD readout are both required. The integrated charge pump eliminates an external LCD bias supply, reducing BOM cost and PCB area. When designing with this MCU, choose the LF (low-voltage, low-power) variant if your system runs from 1.8V–3.6V; the non-LF PIC16F19196 is required for 5V operation. PPS provides remappable peripherals but requires care to avoid conflicting assignments; consult the device datasheet's I/O map for valid pin selections. This page synthesizes distributor pricing, drop-in same-package alternatives, application references, and practical design notes that complement the manufacturer datasheet for engineering decision-making.

Cotação Contato
PIC16LF19196T-E/MRVAO - 28KB Flash 8-bit MCU, 64-QFN, Automotive | Microchip
PIC16LF19196T-E/MRVAO

PIC16LF19196T-E/MRVAO - 28KB Flash 8-bit MCU, 64-QFN, Automotive | Microchip

The Microchip Technology PIC16LF19196T-E/MRVAO is an 8-bit RISC PIC microcontroller from the PIC16F19196 family featuring eXtreme Low-Power (XLP) technology and an integrated LCD driver, housed in a 64-pin QFN (9x9 mm) package with automotive-grade temperature rating. It runs up to 32 MHz from an internal oscillator, delivers 28 KB (16K x 14) of Flash program memory, and is qualified to AEC-Q100 standards for automotive dashboard, body-control and HMI applications. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip built around an 8-bit data path. It integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), peripherals such as timers, ADC, communication ports and interrupt logic into a single package. MCUs sit below microprocessors in the system hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor, and they power everything from toys and appliances to automotive ECUs and industrial sensors. The PIC16F19196 family in particular targets ultra-low-power LCD applications by adding an on-chip LCD charge pump, high-current I/O and Core Independent Peripherals (CIPs) that offload tasks from the CPU. Key features of the PIC16LF19196T-E/MRVAO include 28 KB Flash / 2 KB RAM (typical for this family), an integrated 10-bit ADC, multiple Enhanced Universal Synchronous/Asynchronous Receiver Transmitters (EUSART), I2C/SPI peripherals, a hardware Real-Time Clock and Calendar (RTCC), and a charge-pump-driven LCD driver capable of up to 384 segments. The 8-bit PIC core delivers deterministic 1-instruction-per-clock execution at 32 MHz, while XLP technology keeps active current in the microamp range and deep-sleep current below 100 nA. The automotive-grade temperature range of -40C to +125C and AEC-Q100 qualification are critical for under-hood and dashboard deployments. The architecture combines a Harvard RISC CPU with separate program and data buses, allowing simultaneous fetch and access. Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLCs), Signal Measurement Timers (SMTs) and the Numerically Controlled Oscillator (NCO) let the device react to events without waking the core. This reduces active CPU duty cycle, extending battery life in wireless sensors, smart thermostats and wearable medical devices. Typical applications include automotive instrument clusters with LCD or segment displays, body-control modules, e-bike and e-scooter HMI panels, battery-management front-ends with on-screen SOC indication, white-goods user interfaces, and portable medical monitoring devices that must survive extended idle periods on a coin cell. The wide operating voltage range (1.8 V to 3.6 V typical for the LF variant) lets the part run directly from a single Li-ion or two AA cells. Designers should pair the MCU with the recommended 0.1 uF + 10 uF decoupling network, route the analog AVSS/AVDD pair as a star from a quiet regulator, and reserve one GPIO as an external interrupt for instant wake from sleep. Compared with older PIC16F1 designs, the F19196 family's CIPs and RTCC significantly reduce firmware complexity for user-interface tasks, but code density may increase because each instruction is 14 bits wide. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16 family, and practical design notes that complement the Microchip datasheet family reference manual.

Cotação Contato
PIC16LF19196T-I/MR - 8-bit XLP MCU 32MHz 28KB Flash 64-QFN | Microchip
PIC16LF19196T-I/MR

PIC16LF19196T-I/MR - 8-bit XLP MCU 32MHz 28KB Flash 64-QFN | Microchip

The Microchip Technology PIC16LF19196T-I/MR is an 8-bit PIC16 microcontroller built on the eXtreme Low-Power (XLP) architecture, delivering 32 MIPS at 32 MHz CPU clock from 28KB (16K x 14 words) of on-chip Flash program memory and 2KB SRAM. The "LF" prefix denotes the 1.8V-3.6V wide operating range variant, and the part is housed in a 64-lead 9x9 mm QFN package (industrial -40C to +85C temperature grade). An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, integrated program memory, RAM, and peripherals intended for embedded control tasks. The PIC16 family sits within the broader taxonomy MCU -> microcontroller -> embedded processor -> integrated circuit -> semiconductor. Within Microchip's portfolio the PIC16LF191xx family adds Core Independent Peripherals (CIPs) and an integrated LCD segment driver with charge pump, targeting low-power battery-driven HMIs. Key features include the integrated 12-bit ADC2 with computation, a 5-bit DAC, two analog comparators with programmable reference, configurable logic cells (CLC), Complementary Waveform Generator (CWG), Capture/Compare/PWM (CCP) and PWM modules, Zero-Cross Detect (ZCD), Real-Time Clock/Calendar (RTCC) and Peripheral Pin Select (PPS). The device also integrates 256 bytes of EEPROM data memory and supports hardware Limit Timer (HLT) and Windowed Watchdog Timer (WWDT). The PIC16LF19196 architecture uses a RISC-style 14-bit instruction word with a 32-level hardware stack and an instruction-cycle-time of four clock periods, yielding 8 MIPS per MHz. The integrated charge pump and LCD driver allow glass bias generation from a single low-voltage rail without external boost components, simplifying BOM count for battery powered meter and appliance displays. Typical applications include battery powered LCD meters, thermostat and HVAC control panels, portable medical monitors, IoT sensor nodes with segment displays, white goods user interfaces, and remote controls with capacitive touch buttons. The 1.8V minimum Vdd enables single-cell Li-coin or 2x AA-alkaline designs where energy budget is critical. When designing with this part, choose the LF (low-voltage) variant only if the supply rail will not exceed 3.6V. For 5V-tolerant systems use the PIC16F19196 (5V) variant instead. The 64-QFN package has an exposed pad that must be soldered to the ground plane for thermal and electrical performance per the Microchip datasheet. This page synthesizes distributor pricing for PIC16LF19196T-I/MR, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
PIC16LF19196T-I/PT - 28KB Flash XLP LCD MCU 64-TQFP | Microchip
PIC16LF19196T-I/PT

PIC16LF19196T-I/PT - 28KB Flash XLP LCD MCU 64-TQFP | Microchip

The Microchip Technology PIC16LF19196T-I/PT is an 8-bit PIC16 microcontroller built around the XLP (eXtreme Low-Power) architecture, integrating 28KB Flash program memory, 2KB SRAM, 256B EEPROM, and a 32MHz internal oscillator in a 64-pin TQFP (10x10 mm) surface-mount package with industrial (-40C to +85C) operating range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), peripherals, and I/O on one die. The PIC16 family uses a RISC-based 8-bit core optimized for deterministic execution and ultra-low-power operation. Within the Microchip hierarchy, PIC16LF19196 sits between general-purpose PIC16F devices and specialized low-power PIC24/dsPIC parts, giving engineers a feature-rich MCU tailored to battery-powered human-machine-interface designs. Key differentiating features of this part include integrated LCD drive (up to a configurable number of segments) for glass displays, a built-in charge pump to maintain contrast even as battery voltage drops, high-current I/O drive capable of sourcing/sinking enough current to directly power LCD backlighting, a battery-backed Real-Time Clock/Calendar (RTCC), Core Independent Peripherals (CIPs) such as CWG, SMT, ZCD, PWM, CCP, and PPS, plus a 12-bit ADC2, 5-bit DAC, low-power comparator, windowed watchdog (WWDT), and hardware limit timer (HLT). The 32MHz CPU delivers up to 8 MIPS while consuming only microamps in sleep mode, making the device ideal for energy-harvesting and battery-backed applications. Typical applications include battery-powered LCD thermostats, utility metering displays, white-goods user interfaces (washing machines, microwave ovens), handheld medical devices with segment displays, and any product that combines a glass LCD with sub-microamp standby current. Design consideration: the integrated charge pump simplifies LCD operation at low VDD but requires external reservoir capacitors on the VLCD pin - follow Microchip's AN1542 application note for the precise capacitor values and PCB placement rules. When migrating from a non-LCD PIC16, allocate the unused display pins to standard GPIO to maximize I/O density in compact TQFP layouts.

Cotação Contato
PIC16LF19197-E/MR - 56KB Flash XLP LCD MCU | Microchip
PIC16LF19197-E/MR

PIC16LF19197-E/MR - 56KB Flash XLP LCD MCU | Microchip

The Microchip Technology PIC16LF19197-E/MR is an 8-bit PIC16 XLP microcontroller with 56KB Flash, 4KB RAM, and 256 bytes EEPROM, operating up to 32 MHz in a 64-pin QFN (9x9) package. It features a low-voltage 'LF' core optimized for eXtreme Low-Power (XLP) operation, an integrated LCD driver with charge pump, Core Independent Peripherals (CIPs), and intelligent analog peripherals. The -E temperature grade denotes an extended industrial range of -40C to +125C. A PIC (Peripheral Interface Controller) microcontroller is a compact, programmable computer-on-a-chip built on Harvard architecture. Within Microchip's portfolio, the PIC16 family sits between the PIC10/12/14 baseline line and the PIC18 performance line, targeting low-power embedded applications. The 'LF' prefix indicates a 1.8V-3.6V wide VDD range; 'XLP' denotes Microchip's eXtreme Low-Power technology for battery-driven designs, with sleep currents in the nanoamp range. This particular device family belongs to the hypernym chain: microcontroller -> 8-bit MCU -> PIC16 -> XLP LCD line -> integrated LCD driver MCU. The PIC16LF19197 integrates a 12-bit ADC with Computation (ADC2), a 5-bit DAC, a low-power comparator, zero-cross detect (ZCD), PWM, CCP, CWG, SMT (Signal Measurement Timer), RTCC with Hardware RTCC, Windowed Watchdog Timer (WWDT), Peripheral Module Disable (PMD), and Peripheral Pin Select (PPS) for flexible I/O mapping. It provides up to 56 KB of self-programmable Flash, 4 KB of SRAM, and 256 bytes of EEPROM, enabling firmware field-updates and parameter storage. In the PIC16F19197 family, the 'LF' low-voltage core pairs with a battery-friendly charge pump that keeps the LCD contrast supply stable even when VDD drops toward the brown-out threshold. PPS removes fixed peripheral-to-pin mappings, so engineers can route UART, PWM, and timers to any available I/O, simplifying PCB layout. The CWG (Complementary Waveform Generator) and SMT timers reduce CPU overhead for motor control and signal measurement tasks, while PMD allows unused peripherals to be fully powered down, cutting dynamic current. Typical applications include battery-powered LCD thermostats, utility metering displays, medical glucose and infusion monitors, IoT sensor nodes with character LCDs, and industrial HMI panels. The XLP active current below 50 uA/MHz and the LCD charge pump keep total system current low enough that two AA alkaline cells can power the device for years. When designing with this MCU, ensure VDD decoupling uses a 100 nF ceramic capacitor placed within 5 mm of the VDD pin, route the charge-pump capacitor (LCD_PUMP) traces short and symmetric to minimize ripple on the LCD bias rails, and use PPS to keep high-speed signals away from analog ADC inputs.

Cotação Contato
PIC16LF19197-E/PT - 56KB Flash 8-bit XLP LCD MCU | Microchip
PIC16LF19197-E/PT

PIC16LF19197-E/PT - 56KB Flash 8-bit XLP LCD MCU | Microchip

The Microchip Technology PIC16LF19197-E/PT is an 8-bit PIC microcontroller in the PIC16F191xx family featuring eXtreme Low-Power (XLP) technology with integrated LCD drive, Core Independent Peripherals (CIPs), and intelligent analog peripherals, housed in a 64-pin TQFP (PT) 10x10 mm package. The device integrates 56 KB of Flash program memory, 4 KB of SRAM, and 256 bytes of EEPROM, with a 32 MHz internal oscillator and a 14-bit instruction word architecture. Core highlights include a 12-bit ADC2 with computation, a 5-bit DAC, low-power comparators (LP COMP), zero-cross detection (ZCD), PWM/SCCP/CCP/CWG peripherals, peripheral pin select (PPS), hardware limit timer (HLT), real-time clock/calendar (RTCC), windowed watchdog timer (WWDT), and peripheral module disable (PMD). An 8-bit microcontroller (MCU) is a small computing system-on-a-chip that integrates a CPU, non-volatile program memory, RAM, and peripherals into a single IC. The PIC16 family uses a 14-bit modified Harvard RISC instruction set optimized for deterministic single-cycle execution on most instructions. Within the broader semiconductor taxonomy, the PIC16LF19197 sits in the hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> low-power MCU -> XLP LCD MCU. The "LF" prefix designates the wide-voltage 1.8V-3.6V operating range, making the part especially suited for battery-powered designs. Key features that distinguish this device include its integrated charge pump for LCD glass drive, the on-board 12-bit ADC2 with automated averaging and threshold comparison, and CIP blocks that let hardware peripherals operate without CPU intervention. The LCD driver supports up to a defined segment count depending on package pins, with on-chip bias generation and contrast control. The architecture combines an 8-bit data path with 14-bit instructions, vectored interrupts, a hardware stack, and nanoWatt XLP technology with deep-sleep currents in the nanoampere range. The 64-pin TQFP package exposes a high number of I/O and peripheral channels for the segment, sensor, and user-interface mix typical in industrial HMI panels. Typical applications include battery-powered LCD-based human-machine interfaces (HMI) such as thermostats, weighing scales, security keypads, metering end equipment, medical glucose and fitness monitors, asset trackers, and small industrial control panels. The integrated charge pump and CIP combination is particularly useful when the panel must remain responsive while the CPU spends most of its time in sleep. Designers should evaluate the segment budget against the 64-pin TQFP constraint and budget regulator headroom for the charge-pump demand. Always follow Microchip application note TB3156 ("XLP LCD Design Tips") for contrast-temperature compensation and bias-network selection. This page aggregates distributor availability, pin-compatible alternatives, and engineering design notes not duplicated in the manufacturer datasheet.

Cotação Contato
PIC16LF19197T-E/PTVAO - 8-Bit XLP MCU, 56KB Flash, AEC-Q100 | Microchip
PIC16LF19197T-E/PTVAO

PIC16LF19197T-E/PTVAO - 8-Bit XLP MCU, 56KB Flash, AEC-Q100 | Microchip

The Microchip Technology PIC16LF19197T-E/PTVAO is an 8-bit PIC® XLP™ (eXtreme Low-Power) microcontroller featuring 56KB (32K x 14) of Flash program memory, 4KB of SRAM, and 256 bytes of EEPROM, integrated in a 64-pin TQFP (10x10 mm) package qualified to the AEC-Q100 automotive standard. It runs at up to 32 MHz, supports an operating voltage range of 1.8V to 3.6V (the "LF" low-voltage F-variant), and is engineered for battery-powered and automotive LCD applications. An 8-bit microcontroller (MCU) is a single-chip processor that integrates CPU, RAM, non-volatile program memory, timers, communication peripherals, and often analog blocks. PIC microcontrollers use a Harvard-architecture RISC core with a small, deterministic instruction set optimised for low power consumption and code density. They sit at the bottom of the embedded hierarchy: MCU -> embedded processor -> semiconductor -> integrated circuit, and the 8-bit class remains dominant in cost-, power-, and pin-count-sensitive designs. Key features include an integrated LCD driver with charge pump, Core Independent Peripherals (CIPs) such as CWG, NCO, and CCP, intelligent analog peripherals including a 12-bit ADC with computation and two op-amps, and serial interfaces (two EUSART, two I²C, two SPI). The XLP technology delivers nanoWatt sleep currents ideal for always-on sensor nodes. Architecturally, the device pairs the PIC16 enhanced mid-range core with a wide peripheral set and a hardware LCD module that offloads display refresh from the CPU, reducing active duty cycle and extending battery life. The charge pump allows direct LCD bias generation even when VDD falls below the panel threshold. Typical applications include automotive instrument clusters and HVAC displays, battery-powered metering (water/gas/heat), portable medical monitors, IoT sensor nodes with LCD readouts, and white-goods user interfaces. The wide 1.8V-3.6V supply supports direct 2x AA/2x AAA operation. When designing with this MCU, budget Flash for bootloader overhead and reserve 1-2KB for EEPROM emulation wear-levelling. Use MPLAB X IDE with XC8 compiler and configure the charge-pump voltage before enabling the LCD waveform to avoid incorrect contrast at low VDD. This page synthesises distributor pricing, drop-in alternatives, and design notes that complement the manufacturer datasheet and accelerate your component selection.

Cotação Contato
PIC16LF19197T-I/PT - 8-Bit MCU, 56KB Flash, 32MHz, TQFP-64 | Microchip
PIC16LF19197T-I/PT

PIC16LF19197T-I/PT - 8-Bit MCU, 56KB Flash, 32MHz, TQFP-64 | Microchip

The Microchip Technology PIC16LF19197T-I/PT is an 8-bit PIC® XLP™ microcontroller featuring 56KB (32K x 14) of Flash program memory, 4KB RAM, and a maximum CPU clock of 32MHz, housed in a 64-pin TQFP (10x10mm) package. It integrates eXtreme Low-Power (XLP) technology, a charge pump, high-current I/O drive for backlighting, and battery backup for the Real-Time Clock/Calendar (RTCC), making it purpose-built for battery-powered segment-LCD applications. An 8-bit PIC microcontroller is a RISC-based computing core designed around a Harvard architecture with separate program and data buses, well suited to deterministic real-time control and low-power embedded systems. As a member of the PIC16 (mid-range) family, the PIC16LF19197 sits in a hierarchy of 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. It is part of the broader category of power management-aware, peripheral-rich microcontrollers used in portable instruments, IoT edge nodes, and human-machine interface (HMI) panels. Key specifications include 59 configurable I/O pins, 12-bit ADC resolution, an operating voltage range of 1.8V to 3.6V, an industrial temperature grade (-40C to +85C), and an integrated segmented LCD driver. The device also features Core Independent Peripherals (CIPs) such as CLC, NCO, and PWM that run without CPU intervention, alongside intelligent analog blocks including op-amps, comparators, and a 12-bit differential ADC. Backup battery domain and deep sleep current in the nanoamp range extend battery life in energy-harvesting designs. The architecture couples a 32MHz internal oscillator, hardware multiply, and a wide peripheral set (UART, I2C, SPI, ECCP, MCCP) on a 64-pin TQFP package that exposes nearly the full set of the silicon's peripheral channels. The 'LF' prefix denotes the low-voltage variant, the 'T' suffix denotes tape-and-reel, and the 'I' indicates the industrial temperature range. Typical applications include segment LCD-based metering (utility, gas, water), battery-powered sensor readouts, industrial HMIs with backlight drive, IoT edge devices with RTCC, and portable medical consumables. The integrated charge pump enables LCD bias from a single low-voltage cell, while the high-current I/O can directly drive LED backlights without external transistors. When designing with this part, allocate PCB area near the device for the charge-pump flying capacitors and a large segment-LCD connector footprint, and verify your toolchain (MPLAB X IDE, XC8 compiler) supports the device family. For most engineering purposes, the PIC16LF19197T-I/PT and PIC16LF19197-I/PT are functionally identical - the 'T' suffix only changes packaging orientation (T&R vs. tray). This page synthesizes distributor pricing from 11 sources, drop-in TQFP-64 alternates within the PIC16LF1919x family, and engineering guidance that goes beyond the manufacturer datasheet.

Cotação Contato
PIC16LF1933-E/ML - 7KB Flash XLP 8-Bit MCU, 28-QFN | Microchip
PIC16LF1933-E/ML

PIC16LF1933-E/ML - 7KB Flash XLP 8-Bit MCU, 28-QFN | Microchip

The Microchip PIC16LF1933-E/ML is an 8-bit CMOS flash microcontroller from the PIC16F193X/LF193X family with 7KB (4K x 14) of flash program memory, 256 bytes of SRAM, and 256 bytes of EEPROM, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. It is rated for an extended operating temperature range of -40C to +125C and operates at up to 32 MHz internal clock from a 1.8V to 5.5V supply. A PIC microcontroller (Programmable Interface Controller, or Peripheral Interface Controller) is a compact RISC-based microcontroller family built around Harvard architecture with separate program and data buses, integrated peripherals, and on-chip non-volatile flash memory. Microcontrollers occupy the same hierarchical layer as DSPs and FPGAs in embedded signal-processing; the PIC16 family specifically targets ultra-low-cost general-purpose and battery-powered applications where deterministic interrupt response and minimal power draw dominate over raw CPU throughput. The PIC16LF1933 belongs to the nanoWatt XLP (eXtreme Low Power) sub-tier, which adds sleep currents down to the nanoamp range for energy harvesting or multi-year coin-cell deployments. Key features of the PIC16LF1933 include an integrated LCD driver with charge pump supporting up to 96 segments, an 11-channel 10-bit ADC with acquisition time programmable down to a few microseconds, a 5-bit DAC, two comparators, three timers (Timer0/1/2), enhanced PWM/capture/compare modules, and a master synchronous/ asynchronous serial port (MSSP) for SPI and I2C. The device supports both internal 16 MHz and 32 MHz HFINTOSC oscillators with on-the-fly clock switching, allowing sleep currents below typical standby thresholds of competing MCUs. Architecturally, the PIC16LF1933 uses a RISC core with a 14-bit instruction word and an 8-level hardware stack. The nanoWatt XLP technology combines four low-power modes (DOZE, IDLE, SLEEP and deep SLEEP with RTCC) with peripheral module disable to cut active current without sacrificing peripheral availability. Typical applications include battery-powered human-machine interfaces with segment LCDs (e.g. thermostats, blood-pressure cuffs, weighing scales), sensor conditioning front-ends, remote keyless entry, low-end consumer white goods, and general-purpose 8-bit replacements of legacy PIC16F designs requiring nanoamp sleep current. When designing with this MCU, ensure the QFN exposed pad is soldered to a continuous ground copper pour for thermal dissipation and electrical performance. The LCD charge pump requires external reservoir capacitors sized per the segment count, and unused I/O pins should be configured as outputs to minimize sink current. This page synthesizes distributor pricing, drop-in alternatives in the same 28-QFN footprint, and practical design notes not consolidated on a single manufacturer page.

Cotação Contato
PIC16LF1933-E/MV - 7KB Flash 8-bit MCU LCD nanoWatt XLP | Microchip
PIC16LF1933-E/MV

PIC16LF1933-E/MV - 7KB Flash 8-bit MCU LCD nanoWatt XLP | Microchip

The Microchip PIC16LF1933-E/MV is an 8-bit flash-based CMOS microcontroller with 7 KB of program memory, 256 bytes of RAM and 256 bytes of EEPROM, packaged in a 28-pin UQFN (MV) housing. It belongs to the PIC16LF193x family and features the nanoWatt XLP (eXtreme Low-Power) technology platform that targets battery-powered and energy-harvesting designs. The device operates from 1.8 V to 3.6 V on the LF process node, supporting extended-temperature grades down to -40 °C and up to +125 °C. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU core, program memory, RAM, peripherals and I/O on a single die. The PIC16 family uses Microchip's enhanced mid-range RISC core with 49 instructions and a 16-level hardware stack, positioning this part as a mid-complexity microcontroller within the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. The "LF" prefix denotes the low-voltage F-process variant optimized for ultra-low static and dynamic power. Key features include a 32 MHz internal oscillator, up to 60 LCD segment drive support, an integrated mTouch capacitive sensing module, an on-chip temperature indicator and three ECCP plus two CCP PWM channels. Communication peripherals cover MI2C, SPI and an EUSART with auto-baud detect. The 14-channel 10-bit ADC with voltage reference supports sensor and analog signal acquisition. The architecture combines the enhanced mid-range core with self-read/write flash, configurable logic cells (CLC) and a peripheral pin select (PPS) matrix that maps digital peripherals to a wide choice of I/O pins. The nanoWatt XLP sleep current of typically < 50 nA makes the part suited to applications that spend most of their life in standby. Typical applications include low-power consumer LCD products, battery-powered instrumentation, capacitive-touch human interfaces, sensor nodes with LCD readout, and industrial control panels. Its combination of LCD driver, mTouch and low quiescent current removes several external components and a dedicated touch controller. When designing with the device, plan current budget around the nanoWatt XLP sleep modes and verify that the chosen regulator can sustain the LCD charge-pump transient load. Route the analog VDD/VSS pair separately from the digital supply to preserve ADC accuracy. This page combines manufacturer specification data, distributor pricing snapshots and curated drop-in alternatives to help engineers evaluate the PIC16LF1933-E/MV against competing 8-bit LCD MCUs in the same UQFN-28 footprint.

Cotação Contato
PIC16LF1933-E/SP - 8-bit MCU 7KB Flash 32MHz XLP | Microchip
PIC16LF1933-E/SP

PIC16LF1933-E/SP - 8-bit MCU 7KB Flash 32MHz XLP | Microchip

The Microchip Technology PIC16LF1933-E/SP is an 8-bit CMOS flash-based microcontroller from the PIC16F193X/LF193X family featuring nanoWatt XLP extreme-low-power technology, 7KB (4K x 14 words) of flash program memory, 256 bytes of RAM and 256 bytes of EEPROM, packaged in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole DIP with a 32 MHz internal oscillator and a 1.8 V to 5.5 V operating voltage range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), non-volatile data memory (EEPROM), and a set of on-chip peripherals (timers, ADC, comparators, communication ports) into one package. Within the broader IC taxonomy, an MCU belongs to the microcontrollers -> microcomputer ICs -> integrated circuits -> semiconductor devices hierarchy. The PIC16 family uses Microchip's enhanced mid-range RISC architecture executing most instructions in a single 200 ns cycle, making it well-suited for cost-sensitive embedded control where deterministic timing and low power are priorities. Key features of the PIC16LF1933 include an integrated LCD driver supporting up to 96 segments, a 10-bit ADC with up to 17 channels, two comparators, multiple PWM modules, two USART, MSSP (SPI/I2C) peripherals, and the nanoWatt XLP sleep current of typically under 50 nA. The 28-pin SPDIP package provides through-hole PCB mounting for prototyping, breadboards, and legacy designs where socketed or hand-solderable parts are preferred over surface-mount alternatives. The LF1933 variant operates from 1.8 V to 5.5 V, making it the lower-voltage counterpart of the PIC16F1933 (2.3 V to 5.5 V). Its nanoWatt XLP technology delivers typical sleep currents in the tens of nanoamps, supporting battery-powered applications such as remote sensors, metering, and wearable devices that require years of operation from a single coin cell. Typical applications include low-power battery sensor nodes, LCD-displayed metering equipment, industrial control panels, home appliances with segment displays, and remote-control key fobs. The on-chip LCD driver eliminates external display controller ICs, reducing BOM cost and PCB area. When designing with this part, ensure that the LF (low-voltage, 1.8 V minimum) variant is used when the supply rail may drop below 2.3 V, such as in 2x AA battery packs near end-of-life. The 'E' suffix indicates the extended -40 C to +125 C operating temperature grade. This page synthesizes distributor availability, verified specifications, drop-in same-package alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Cotação Contato
PIC16LF1933-I/ML - 8-bit XLP MCU, 7KB Flash, LCD Driver | Microchip
PIC16LF1933-I/ML

PIC16LF1933-I/ML - 8-bit XLP MCU, 7KB Flash, LCD Driver | Microchip

The Microchip Technology PIC16LF1933-I/ML is an 8-bit CMOS flash microcontroller built on the enhanced mid-range PIC16 core, delivering 7 KB of Flash program memory, 256 bytes of SRAM and 256 bytes of EEPROM in a 28-pin VQFN (ML, 6x6 mm) package. It runs up to 32 MHz instruction rate at 1.8V to 5.5V with nanoWatt XLP extreme-low-power technology for battery-friendly designs. The integrated LCD driver supports up to 96 segments, eliminating external display controllers. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, RAM, EEPROM and a rich set of peripherals (ADC, timers, communications, I/O) onto one die. PIC16-family parts sit at the low-power, low-cost end of the embedded tree: PIC16 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The LF sub-family is specifically engineered for ultra-low active and sleep currents (nanoWatt XLP), making PIC16LF1933 parts common in battery-powered human-interface and metering products. Key features of this part include 7 KB (4K x 14) self-read Flash with ICD, 256 B RAM, 256 B EEPROM, an on-chip 32 MHz internal oscillator, 11-channel 10-bit ADC, four timers (Timer0/1/2/6), enhanced CCP, AUSART, SSP/SPI/I2C, mTouch capacitive sensing, a charge-pump LCD driver (96 segments), up to 25 I/O pins, and nanoWatt XLP sleep currents down to a few nA. The 28-VQFN package supplies an exposed thermal pad for improved dissipation in compact modules. Architecturally, the device uses a RISC-style Harvard bus with a 14-bit instruction word, 16-level hardware stack and 49-instruction set, providing deterministic 200 ns minimum instruction execution at 20 MHz and 125 ns at 32 MHz. The internal 32 MHz HFINTOSC plus 31 kHz LFINTOSC let designs run without external crystals, while the LCD charge pump keeps the display contrast stable down to 1.8V supply rails. Typical applications include low-power human-interface products such as thermostat/HVAC front panels, battery-powered medical monitors (glucose meters, pulse oximeters), consumer remote controls with LCD, electronic shelf labels, utility metering endpoints, and industrial sensor nodes. The combination of LCD driver, eXtreme Low Power and 28-VQFN small footprint is what engineers select this part for. When designing with this device, budget the I/O count carefully - the 28-pin QFN exposes 25 I/O, but several pins are multiplexed with the LCD segment driver; reserve dedicated pins for the LCD charge pump and bias network to avoid display flicker on low VDD rails. The ICSP/ICD pins (ICSPCLK/ICSPDAT) must be reachable on the PCB for in-circuit debugging. This page consolidates distributor pricing, drop-in VQFN-28 alternatives, comparison vs PIC16F1933 and PIC16F1825, and practical design notes that supplement the manufacturer datasheet.

Cotação Contato