PIC16LF19195-E/MR - 8-bit 32MHz XLP MCU 14KB Flash LCD | Microchip
N.º da peça: PIC16LF19195-E/MR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.84 | $2,84 |
| 10 | $2.55 | $25,50 |
| 100 | $2.13 | $213,00 |
| 500 | $1.85 | $925,00 |
| 1.000 | $1.62 | $1.620,00 |
PIC16LF19195-E/MR Visão geral
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU core, non-volatile program memory, working RAM, and a mix of analog and digital peripherals. The PIC16 family uses a RISC-style Harvard architecture that executes most instructions in one oscillator cycle, giving the PIC16LF19195-E/MR roughly 8 MIPS at its 32 MHz top speed. It sits inside the larger power-management-aware hierarchy of eXtreme Low-Power (XLP) PIC MCUs and shares a toolchain (MPLAB X IDE + XC8) with all modern PIC16 devices.
Key features include eXtreme Low-Power (XLP) operation with active current typically below a few hundred µA/MIPS, an integrated LCD driver with selectable charge pump and high-current segment pins for direct backlight driving, a battery-backed Real-Time Clock/Calendar (RTCC), and Core Independent Peripherals (CIPs) such as CWG, CCP, PWM, SMT and ZCD that offload timing tasks from the core. The 12-bit ADC2 with internal channels, a 5-bit DAC, low-power comparators (LP COMP) and Peripheral Pin Select (PPS) provide flexible analog and pin routing. The 64-pin QFN exposes up to 58 I/O with PPS remapping.
Typical applications include battery-powered thermostats and utility meters, remote controls and home automation keypads with segmented LCD, medical monitoring handhelds (glucometers, pulse oximeters), industrial sensor transmitters with RTCC-stamped logs, and IoT edge nodes driving small character displays. The LCD charge pump lets the design keep the display active even when the battery voltage falls below the LCD threshold.
When designing with this part, budget 1 square inch of copper under the exposed pad for thermal relief, keep analog traces short, and place the 0.1 µF VDD bypass cap within 3 mm of the supply pin. Use MPLAB X IDE with the XC8 compiler and select the appropriate Low-Power Sleep mode (Retention Sleep vs. full Sleep) to fully exploit the XLP benefit in battery applications.
Alternativas drop-in para PIC16LF19195-E/MR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LF19195-E/MR (mesmo formato e footprint) — diferindo em ADC, LCD Driver, Package, Core Architecture, Comparators.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F19195-E/MR
✅ Drop-In✓ Em estoque
$1.32 / unidade
Ver ficha técnica →PIC16LF19196-E/MR
✅ Drop-In✓ Em estoque
$1.78 / unidade
Ver ficha técnica →PIC16LF19197-E/MR
✅ Drop-In✓ Em estoque
$3.4 / unidade
Ver ficha técnica →PIC16LF19176-I/MV
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.74 / unidade
Ver ficha técnica →PIC16LF19195-I/MR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16LF19195-E/MR Classificações máximas e características elétricas
| Family | PIC® XLP™ 16F |
| Core | 8-bit PIC RISC (Harvard) |
| Maximum CPU Frequency | 32 MHz |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 256 B |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| I/O Pins (max) | 58 |
| ADC | 12-bit ADC2 |
| DAC | 5-bit DAC |
| Comparators | Low-Power COMP (LP COMP) |
| LCD Driver | Integrated with charge pump and high-current segment pins |
| Timers/PWM/CIP | CCP, PWM, CWG, SMT, ZCD, WWDT, RTCC, HLT, PMD, PPS |
| Encapsulamento | 64-pin QFN (9x9 mm) |
| Temperatura de operação | -40C to +125C (E = Enhanced) |
| Tipo de montagem | Surface Mount |
| RoHS | Compliant |
Configuração de pinos do PIC16LF19195-E/MR
| Pino 1 | RA0 — Port A bit 0 / analog / LCD segment |
| Pino 2 | RA1 — Port A bit 1 / analog / LCD segment |
| Pino 3 | RA2 — Port A bit 2 / analog / LCD segment |
| Pino 4 | RA3 — Port A bit 3 / analog / LCD segment |
| Pino 5 | RA4 — Port A bit 4 / analog / LCD segment |
| Pino 6 | RA5 — Port A bit 5 / analog / LCD segment |
| Pino 7 | RA6 — Port A bit 6 / analog / LCD segment |
| Pino 8 | RA7 — Port A bit 7 / analog / LCD segment |
| Pino 9 | VSS — Ground reference |
| Pino 10 | RB0 — Port B bit 0 / ICSPCLK / LCD segment |
| Pino 11 | RB1 — Port B bit 1 / ICSPDAT / LCD segment |
| Pino 12 | RB2 — Port B bit 2 / LCD segment |
| Pino 13 | RB3 — Port B bit 3 / LCD segment |
| Pino 14 | RB4 — Port B bit 4 / LCD segment |
| Pino 15 | RB5 — Port B bit 5 / LCD segment |
| Pino 16 | RB6 — Port B bit 6 / ICDCLK / LCD segment |
| Pino 17 | RB7 — Port B bit 7 / ICEDAT / LCD segment |
| Pino 18 | VSS — Ground (secondary) |
| Pino 19 | RC0 — Port C bit 0 / analog / LCD segment |
| Pino 20 | RC1 — Port C bit 1 / analog / LCD segment |
| Pino 21 | RC2 — Port C bit 2 / analog / LCD segment |
| Pino 22 | RC3 — Port C bit 3 / analog / LCD segment |
| Pino 23 | RC4 — Port C bit 4 / analog / LCD segment |
| Pino 24 | RC5 — Port C bit 5 / analog / LCD segment |
| Pino 25 | RC6 — Port C bit 6 / analog / LCD segment |
| Pino 26 | RC7 — Port C bit 7 / analog / LCD segment |
| Pino 27 | RD0 — Port D bit 0 / LCD segment |
| Pino 28 | RD1 — Port D bit 1 / LCD segment |
| Pino 29 | RD2 — Port D bit 2 / LCD segment |
| Pino 30 | RD3 — Port D bit 3 / LCD segment |
| Pino 31 | RD4 — Port D bit 4 / LCD segment |
| Pino 32 | RD5 — Port D bit 5 / LCD segment |
| Pino 33 | RD6 — Port D bit 6 / LCD segment |
| Pino 34 | RD7 — Port D bit 7 / LCD segment |
| Pino 35 | VSS — Ground reference |
| Pino 36 | RE0 — Port E bit 0 / LCD segment |
| Pino 37 | RE1 — Port E bit 1 / LCD segment |
| Pino 38 | RE2 — Port E bit 2 / LCD segment |
| Pino 39 | RE3 — Port E bit 3 / LCD segment |
| Pino 40 | RF0 — Port F bit 0 / LCD segment |
| Pino 41 | RF1 — Port F bit 1 / LCD segment |
| Pino 42 | RF2 — Port F bit 2 / LCD segment |
| Pino 43 | RF3 — Port F bit 3 / LCD segment |
| Pino 44 | RF4 — Port F bit 4 / LCD segment |
| Pino 45 | RF5 — Port F bit 5 / LCD segment |
| Pino 46 | RF6 — Port F bit 6 / LCD segment |
| Pino 47 | RF7 — Port F bit 7 / LCD segment |
| Pino 48 | RG0 — Port G bit 0 / LCD segment |
| Pino 49 | RG1 — Port G bit 1 / LCD segment |
| Pino 50 | RG2 — Port G bit 2 / LCD segment |
| Pino 51 | RG3 — Port G bit 3 / LCD segment |
| Pino 52 | RG4 — Port G bit 4 / LCD segment |
| Pino 53 | RG5 — Port G bit 5 / LCD segment |
| Pino 54 | RG6 — Port G bit 6 / LCD segment |
| Pino 55 | RG7 — Port G bit 7 / LCD segment |
| Pino 56 | VSS — Ground reference |
| Pino 57 | VCAP — Decoupling cap for LCD charge pump regulator |
| Pino 58 | VLCD3 — LCD bias voltage 3 |
| Pino 59 | VLCD2 — LCD bias voltage 2 |
| Pino 60 | VLCD1 — LCD bias voltage 1 |
| Pino 61 | VDD — Positive supply |
| Pino 62 | OSC1 — Crystal oscillator input / CLKIN |
| Pino 63 | OSC2 — Crystal oscillator output |
| Pino 64 | MCLR — Master Clear (reset, active low) |
Aplicações típicas
PIC16LF19195-E/MR é adequado para 6 aplicaçãos: Battery-Powered Thermostat with LCD, Medical Glucose / Pulse Meter, Industrial Sensor Transmitter with RTCC Logging, Remote Control / Home Automation Keypad, Smart Utility Meter (Electric / Water / Gas), IoT Edge Node with Character LCD.
Battery-Powered Thermostat with LCD
The PIC16LF19195-E/MR is well suited to wall-mounted thermostats running from two AA cells because it operates down to 1.8 V while still driving the LCD through the integrated charge pump. With 14 KB Flash, 1 KB SRAM and 256 B EEPROM, the firmware fits the room-temperature calibration tables, weekly schedule and a CIP-driven state machine without external memory. Per the Microchip datasheet, the device consumes only a few hundred µA/MIPS in active mode and falls into the nA range in Retention Sleep, extending battery life over multi-year intervals on the segment display. The RTCC provides wall-clock timekeeping across power cycles so the schedule is preserved when the user replaces the cells.
Recomendado
Medical Glucose / Pulse Meter
The 12-bit ADC2 with internal channels and 5-bit DAC on the PIC16LF19195-E/MR supports electrochemical strip reading or pulse-oximetry front-end conditioning in a single-chip medical hand-meter design. The XLP active current (a few hundred µA/MIPS) lets the device wake, take a measurement, run the math, drive the segmented LCD, and return to Sleep within the patient's expected battery-life target. CIPs such as SMT and CCP handle strip timing, while PPS remaps the analog channels to clean PCB traces, reducing BOM cost. The 64-pin QFN footprint also leaves generous PCB area for an isolated analog front-end.
Recomendado
Industrial Sensor Transmitter with RTCC Logging
For a 4-20 mA or wireless HART-style transmitter, the PIC16LF19195-E/MR pairs a 12-bit ADC2 for sensor conditioning with the RTCC block to time-stamp every measurement into the 256 B EEPROM (sufficient for circular buffering at 1 sample/min for >4 hours). The CWG peripheral synthesizes dead-band-controlled PWM for an analog output stage, while the integrated low-power comparator (LP COMP) implements brown-out and over-temperature hardware protection. The 1.8-3.6 V VDD range is compatible with industrial 24 V rails stepped down through a low-quiescent LDO, and the E-grade -40 to +125C spec covers outdoor enclosures.
Recomendado
Remote Control / Home Automation Keypad
A handheld remote or wall keypad benefits from the PIC16LF19195-E/MR's integrated LCD driver with charge pump, which lets the segment display operate even when VDD droops during a low-battery event. The 12-bit ADC2 reads battery voltage directly (no external resistor-divider ADC needed), and CIPs like CWG and SMT generate IR carrier modulation in hardware, offloading the CPU and extending battery life. PPS remaps the segment and key-scan pins so the same 64-QFN package can be reused across multiple product SKUs with different keypad layouts.
Recomendado
Smart Utility Meter (Electric / Water / Gas)
Utility meters running from lithium primary cells are an ideal match for the PIC16LF19195-E/MR: the LCD charge pump keeps the segment display visible from a nearly depleted 2.7 V cell, the RTCC tracks time-of-use tariffs, and the 256 B EEPROM retains logged data for >20 years. The ZCD peripheral synchronizes mains-voltage crossings for power-meter AFE sampling without CPU intervention, and the integrated low-power comparator provides brown-out protection. The 64-pin QFN leaves enough I/O to drive both a segmented LCD and an optical tamper-detection sensor simultaneously.
Recomendado
IoT Edge Node with Character LCD
For battery-powered IoT sensors that must show status on a 2x16 character LCD without a backlight, the PIC16LF19195-E/MR provides both the 8-bit MCU and the segment/character LCD drive with a charge pump that maintains the display down to ~1.8 V. With 14 KB Flash and 1 KB SRAM, the firmware fits an interrupt-driven sub-GHz radio state machine plus display refresh. The 12-bit ADC2 samples analog sensors, the SMT peripheral times low-power radio windows, and PPS frees the designer from rigid pin assignments. The /MR QFN-64 footprint allows direct PCB reuse across multiple product variants.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LF19195-E/MR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F19195-E/MR | PIC16LF19196-E/MR | PIC16LF19197-E/MR | PIC16LF19176-I/MV | PIC16LF19195-I/MR |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) /MR | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-UQFN (MV) - same 64-pin | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Frequency | 8-bit PIC / 32 MHz | 8-bit PIC / 32 MHz | 8-bit PIC / 32 MHz | 8-bit PIC / 32 MHz | 8-bit PIC / 32 MHz | 8-bit PIC / 32 MHz |
| VDD Range | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Flash | 14 KB | 14 KB | 28 KB | 56 KB | 14 KB | 14 KB |
| SRAM | 1 KB | 1 KB | 2 KB | 4 KB | 1 KB | 1 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B | 256 B |
| Operating Temperature | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) |
| LCD Driver with Charge Pump | Yes | Yes | Yes | Yes | Yes | Yes |
Principais diferenciais
- Integrated LCD driver with charge pump keeps display visible down to 1.8 V (vs PIC16F19195-E/MR)
- Pin-compatible upgrade path to higher-memory siblings (vs PIC16LF19196-E/MR)
- Wider operating temperature than I-grade (-40 to +125 C vs -40 to +85 C) (vs PIC16LF19195-I/MR)
Notas de projeto
Estimated: at 32 MHz / 3.3 V with all peripherals active, typical active current is a few hundred µA/MIPS, giving less than 10 mW of dissipation in the 64-pin QFN. The exposed thermal pad (EP) of the /MR package must be soldered to a continuous copper pour of at least 1 square inch to keep junction rise below 20 C in enclosed industrial enclosures. Avoid cutting the EP plane under the analog traces; instead, route analog signals over a separate inner layer or use guard traces tied to AVSS. E-grade -40 to +125C operation is supported only when the EP is properly soldered.
Place the 0.1 µF VDD bypass capacitor within 3 mm of the VDD/VSS pins (pin 61 and pins 9/18/35/56 in the 64-QFN land pattern). The VCAP decoupling capacitor (pin 57) for the LCD charge pump regulator must be a low-ESR 1 µF ceramic placed directly on the VCAP node; this is a critical bypass for stable charge-pump operation below 2.0 V. Keep the LCD bias lines (VLCD1/2/3, pins 58-60) short and routed over a ground pour to minimize injection of bias ripple into the analog channels.
Do not connect an external pull-up on MCLR (pin 64) without a series resistor; the MCLR pin is also used as an ICD high-voltage entry and a direct high-voltage signal can damage programming mode. When migrating from PIC16LF19195 to PIC16F19195, verify that VDD never drops below 2.3 V during deep sleep wake-up, because the F-variant brown-out reset (BOR) may not release until that threshold. Finally, the PPS registers must be unlocked before configuration; forgetting to clear PPSLOCK causes peripheral outputs to appear silent.
Informações de conformidade
RoHS and lead-free per Microchip product family page. AEC-Q100 not claimed on this part; automotive customers should consult Microchip's AEC-Q100 qualified PIC portfolio. MSL moisture sensitivity level not specified in the verified web data and is left as [DATA_NEEDED] in the specs array.
