Microcontroladores

Produtos (18739)

ATSAMD21J16B-MU - 64KB Flash Cortex-M0+ MCU | Microchip 64-QFN
ATSAMD21J16B-MU

ATSAMD21J16B-MU - 64KB Flash Cortex-M0+ MCU | Microchip 64-QFN

The Microchip Technology ATSAMD21J16B-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21 family, featuring 64KB Flash, 8KB SRAM, and operating up to 48MHz. It is housed in a 64-pin QFN (9x9 mm) package with an exposed thermal pad and is rated for the industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. The ARM Cortex-M0+ is the smallest and most energy-efficient ARM processor core, designed for embedded applications that prioritize low power consumption and deterministic real-time response. Within the broader taxonomy, the SAM D21 sits at the intersection of MCU -> 32-bit MCU -> ARM Cortex-M MCU -> low-power MCU -> Microchip SAM D family, and the ATSAMD21J16B is the 64KB Flash variant within the SAM D21J 64-pin sub-family. Key features include the Cortex-M0+ core delivering 2.46 CoreMark/MHz, full-speed USB 2.0 device/host support, a 12-bit 1 MSPS ADC, two I2C, up to six SERCOM (configurable serial communication), and advanced low-power Idle/Standby sleep modes with SleepWalking peripherals. The device also integrates a 12-channel DMAC, a 12-channel Event System, and a 48MHz DFLL locked to a 32.768kHz crystal for accurate USB timing. The 64-QFN package with EPAD provides a low-thermal-resistance path to the PCB copper pour, enabling sustained 48MHz operation in thermally constrained industrial enclosures. The SAM D21 family is drop-in compatible with the SAM D20 family, simplifying migration from lower-pin-count or smaller-Flash designs. The 64KB Flash variant (J16) is positioned for cost-sensitive connected designs that need USB, more serial channels, or a richer analog front end than the J15 (32KB) variant. With its combination of low power, USB, and Cortex-M0+ performance, the ATSAMD21J16B-MU targets IoT sensor nodes, consumer USB peripherals, and industrial control modules.

Cotação Contato
ATSAMD21J16B-MUT - 48MHz Cortex-M0+ 64KB Flash MCU | Microchip
ATSAMD21J16B-MUT

ATSAMD21J16B-MUT - 48MHz Cortex-M0+ 64KB Flash MCU | Microchip

The Microchip Technology ATSAMD21J16B-MUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21J family, featuring 64KB of Flash and 8KB of SRAM in a 64-pin QFN (9x9 mm) package. It operates at a maximum CPU frequency of 48 MHz and reaches 2.46 CoreMark/MHz, targeting low-power embedded applications across industrial and consumer segments. The device supports 1.62V to 3.63V operating voltage and integrates advanced peripherals including a 12-channel DMA controller and 12-channel Event System for energy-efficient peripheral coupling. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on a single silicon die. The ARM Cortex-M0+ is the most energy-efficient ARM processor core, designed for deterministic real-time control and ultra-low power operation. The SAM D21 family positions itself between 8-bit/16-bit MCUs (PIC16, STM8) and higher-end Cortex-M3/M4 parts, balancing cost, power, and computational throughput. Key features include 64KB Flash, 8KB SRAM, 48 MHz CPU, integrated Full-Speed USB 2.0 device, and up to 6 SERCOM (serial communication) interfaces configurable as I2C/SPI/UART. The SAM D21J series offers 64-pin QFN and 64-pin TQFP package options with up to 52 GPIO pins, supporting multiple package variants within the same family for design flexibility. Functional Safety (FuSa) variants are available for safety-critical applications requiring IEC 61508 SIL capability. Architecturally, the ATSAMD21J16B uses a single-cycle I/O bus (IOBUS) and peripheral event system that allows peripherals to communicate without CPU intervention, dramatically reducing active-mode power consumption. SleepWalking peripherals can wake the CPU only when needed, enabling deep sleep currents below 10 uA. The integrated DFLL48M digital frequency-locked loop provides high-accuracy 48 MHz USB operation directly from a low-power 32.768 kHz crystal. Typical applications include IoT sensor nodes, USB human-interface devices (HID), industrial control modules, smart home gateways, and battery-powered wearable electronics. The combination of Full-Speed USB, low-power modes, and small QFN footprint makes it especially suited for compact USB-powered devices. When designing with this part, note the MUT suffix indicates Tape & Reel packaging, industrial temperature grade (-40C to +85C), and 3.3V nominal supply. PCB layout should keep the decoupling network (typically 100 nF + 4.7 uF) within 3 mm of the VDD pins to maintain signal integrity on the high-speed USB data lines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing engineers with a one-stop reference for component selection, sourcing, and PCB implementation.

Cotação Contato
ATSAMD21J17A-AF - 48MHz Cortex-M0+ MCU, 128KB Flash, USB | Microchip
ATSAMD21J17A-AF

ATSAMD21J17A-AF - 48MHz Cortex-M0+ MCU, 128KB Flash, USB | Microchip

The Microchip Technology ATSAMD21J17A-AF is a 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, integrating 128 KB of Flash and 16 KB of SRAM in a 64-pin TQFP (10x10 mm) package. Part of the SAM D21J family, it combines a single-cycle hardware multiplier, a full-speed USB 2.0 device controller with on-chip transceiver, six configurable SERCOM modules, a 12-bit 350 ksps ADC, and a 10-bit 350 ksps DAC. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program and data memory, and configurable peripherals on one silicon die. The ARM Cortex-M0+ is the most energy-efficient ARM processor core for embedded applications, and Microchip's SAM D21 family extends the Cortex-M0+ with a dedicated event system, SERCOM peripherals, and a SleepWalking power-management architecture. The 'J' suffix denotes the high-pin-count 64-pin variant, providing maximum GPIO and peripheral accessibility versus the 'G' (48-pin) and 'E' (32-pin) siblings. Key differentiating specifications include 128 KB of Flash with 4 KB of read-while-write (RWW) EEPROM emulation, six SERCOM channels each independently configurable as I2C, SPI, or USART, an integrated USB 2.0 Full-Speed device with on-chip transceiver, and an operating voltage range of 1.62 V to 3.63 V. The 12-bit ADC offers up to 20 analog input channels with hardware oversampling, and the device achieves 2.46 CoreMark/MHz, delivering ~118 CoreMark at maximum clock. Industrial temperature range is -40C to +125C. Architecturally, the SAM D21 family uses a single AHB/APB bus matrix with a separate bridge for the SERCOM modules, enabling deterministic DMA-driven I/O. The SleepWalking event system allows peripherals to wake the core only on relevant events, dramatically reducing active-mode current in battery-powered applications where quiescent draw dominates. The integrated USB PHY eliminates external transceiver circuitry, saving BOM cost and PCB area in HID, CDC, and composite-USB designs. Typical applications include USB Human Interface Devices, home automation gateways, low-power wireless sensor nodes, smart metering, industrial control panels, and consumer wearables. The integrated USB device controller and rich SERCOM set simplify designs requiring multiple serial protocols without external glue logic, and the 4 KB RWW EEPROM area is well-suited to data logging applications requiring non-volatile parameter storage without an external EEPROM chip. When designing with this device, allocate the 128 KB Flash carefully: approximately 8 KB is consumed by the SAM D21 bootloader, leaving ~120 KB for application code. Use Atmel Studio 7, MPLAB X IDE, or MPLAB Harmony 3 with the START code-configurator for peripheral initialization, and budget quiescent current carefully: full Sleep mode draws under 10 uA, but active peripherals can dominate consumption. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMD21J17A-AU - 48MHz Cortex-M0+ 128KB MCU 64-TQFP | Microchip
ATSAMD21J17A-AU

ATSAMD21J17A-AU - 48MHz Cortex-M0+ 128KB MCU 64-TQFP | Microchip

The Microchip Technology ATSAMD21J17A-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D21J family, delivering 48 MHz CPU performance with 128 KB of Flash and 16 KB of SRAM in a 64-pin TQFP (10x10 mm) package. Operating from a 1.62 V to 3.6 V supply, it integrates a full peripheral set including SERCOM, USB, ADC, DAC, and event system for connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripherals onto one die. Within the embedded hierarchy, an MCU sits below microprocessors in computational capability but above basic logic ICs in functional density, providing self-sufficient intelligence for sensors, actuators, and human-interface subsystems. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, optimised for deterministic interrupt response and low active/idle power. Microchip's SAM D21 family extends this core with Microchip-proprietary analog and timer IP, producing parts that compete head-to-head with STM32L0, EFM32, and NXP Kinetis KE series for ultra-low-power IoT sockets. Key features include 48 MHz Cortex-M0+ core with single-cycle multiplier, 128 KB Flash plus 16 KB SRAM, full-speed USB 2.0 Device with on-the-go (OTG) support, up to six SERCOM configurable serial interfaces, 12-bit 1 MSPS ADC, 10-bit DAC, 5 timers/counters, two I2S interfaces, and a peripheral event system that allows peripherals to interact without CPU wakeup. The 64-pin TQFP footprint exposes 52 GPIO with 8 analog-capable pins, suiting boards that need USB, multiple UART/SPI/I2C buses, and motor-control PWM in parallel. The SAM D21 architecture uses a separate AHB peripheral bus and a peripheral event fabric that lets SERCOM, ADC and timer blocks trigger one another in hardware, offloading the Cortex-M0+ core. The on-chip USB 2.0 Full-Speed transceiver and PHY eliminate external crystals for low-speed USB, and a 32 kHz internal RTC oscillator reduces BOM cost for battery-powered designs. Sampled in the SAM D21 datasheet, an LDO plus DC-DC SleepWalking power path enables measured run currents of a few mA at 48 MHz and sub-µA sleep currents. Typical applications include consumer wearables, smart-home sensor hubs, USB HID peripherals, low-power wireless nodes, industrial metering and home-automation gateways. The 64-pin TQFP gives enough peripheral headroom for 4-wire SPI displays plus an SD card interface, and the AES engine supports secure firmware updates. When designing with this MCU, ensure the 64-pin TQFP pad geometry matches the standard SAM D20/D21/DA1 land pattern so code written for one part can be ported across the family without PCB rework. Decoupling VDDIN with 100 nF + 1 µF and reserving a 32.768 kHz crystal footprint is recommended practice across the family. This page consolidates live DigiKey/Mouser stock, drop-in compatible family variants, and practical design notes that the manufacturer datasheet alone does not present.

Cotação Contato
ATSAMD21J17A-AUT - SAM D21 Cortex-M0+ 48MHz MCU | Microchip
ATSAMD21J17A-AUT

ATSAMD21J17A-AUT - SAM D21 Cortex-M0+ 48MHz MCU | Microchip

The Microchip Technology ATSAMD21J17A-AUT is an ARM Cortex-M0+ based 32-bit flash microcontroller from the SAM D21 family, delivering 48 MHz CPU performance with 128 KB Flash and 16 KB SRAM in a 64-pin TQFP (10x10 mm) package. As an automotive-qualified ("-AUT" suffix) part, it targets functional-safety capable applications in harsh environments while retaining the same peripheral set as the industrial-grade ATSAMD21J17A-AU variant. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. ARM Cortex-M0+ cores specifically target ultra-low-power embedded applications: they use the Thumb-2 instruction subset, offer single-cycle GPIO access, and integrate sleep modes that allow deep power-down while still waking on peripheral events. The SAM D21 family sits within Microchip's broader hierarchy of 8-bit PIC -> 16-bit PIC24 -> 32-bit SAM ARM Cortex-M microcontrollers, and is the company's M0+ flagship for consumer and industrial IoT. Key features of the ATSAMD21J17A-AUT include up to 6 SERCOM (serial communication) interfaces configurable as I2C/SPI/UART, a 12-bit ADC with up to 20 channels, a 10-bit DAC, four 16-bit Timer/Counters, a 32-bit RTC, and a full-speed USB 2.0 device/host interface. The device operates from 1.6 V to 3.6 V and integrates an on-chip voltage regulator that simplifies single-rail designs. Hardware touch support (PTC) and a configurable Event System let designers route peripheral triggers without CPU intervention, reducing latency and power. Architecturally, the SAM D21 uses a Harvard bus with separate AHB and APB bridges, allowing simultaneous Flash fetch and DMA transfer. The Cortex-M0+ core pairs with a Nested Vectored Interrupt Controller (NVIC) and a Wake-up Interrupt Controller (WIC) so deep-sleep currents remain in the microampere range. Advanced analog (ADC, DAC, comparators) and motor-control timers are inherited from Atmel's M0+ heritage, giving designers access to high-performance mixed-signal capability on a low-power core. Typical applications include home automation endpoints, smart metering, consumer wearables, industrial sensor hubs, USB HID peripherals, and automotive body-electronics modules where -AUT grade is required. The wide SERCOM count (six) makes the part attractive for bridge designs that must speak multiple protocols (e.g., SPI sensor + I2C display + UART debug). A key design consideration is the package pin-out: the 64-pin TQFP exposes 52 GPIO, leaving ample headroom for both functional pins and breadboard-friendly breakout. Ensure your PCB layout respects Microchip's recommended decoupling (100 nF + 4.7 uF bulk near VDDIN) and that the VDDCORE pin is left floating only if using the internal regulator (the default for VDDIN > 2.0 V). This page synthesizes current distributor pricing, automotive-grade qualification, and drop-in alternatives in the SAM D21 family that engineers may not find in the standalone datasheet PDF.

Cotação Contato
ATSAMD21J17A-CUT - SAM D21J Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD21J17A-CUT

ATSAMD21J17A-CUT - SAM D21J Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology (formerly Atmel) ATSAMD21J17A-CUT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D21J family, delivering 48 MHz CPU performance with 128 KB of embedded Flash and 16 KB of SRAM in a 64-ball UFBGA (5x5 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The SAM D21 family belongs to the broader category of low-power ARM Cortex-M0+ microcontrollers, positioned between 8-bit AVR/PIC microcontrollers and higher-performance Cortex-M4/M7 parts. It serves as the brain of embedded systems requiring deterministic real-time control with low energy consumption. Key features of this device include a 48 MHz Cortex-M0+ core reaching 2.46 CoreMark/MHz, Full-Speed USB 2.0 with on-chip transceiver, a 12-bit 350 ksps ADC with up to 20 channels, two analog comparators, a 10-bit DAC, up to six SERCOM configurable serial communication peripherals, an Event System for inter-peripheral signaling, and a Peripheral Touch Controller (PTC) supporting capacitive touch sensing. The device operates from 1.62V to 3.63V across the industrial -40C to +85C temperature range. The SAM D21 architecture combines a high-performance 32-bit core with Microchip's SleepWalking technology, enabling peripherals to wake the core only on relevant events while consuming only a few microamperes. The integrated USB 2.0 Full-Speed transceiver eliminates external PHY chips, reducing BOM cost for connected consumer and industrial products. Hardware cryptographic support includes AES-256 and True Random Number Generator (TRNG) blocks. Typical applications include home automation gateways, smart consumer appliances, IoT sensor nodes, industrial metering, HVAC controllers, USB HID peripherals (keyboards, mice, custom HID), wearable health monitors, and capacitive touch human-machine interfaces. The combination of USB, capacitive touch, and rich analog peripherals makes this MCU especially well-suited to products that must communicate with hosts and interact with users. Designers should budget adequate PCB area for the 64-ball UFBGA 5x5 mm footprint, which requires sub-0.5 mm pitch fanout routing. For new designs, evaluate the ATSAMD21J17A-AUT TQFP-64 variant for easier prototyping and hand-rework, since BGA packages require X-ray inspection. Decoupling capacitors should be placed within 3 mm of all supply pins with a 4.7 uF bulk plus 100 nF ceramic combination. This page consolidates distributor stock, parametric drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

Cotação Contato
ATSAMD21J17A-MF - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD21J17A-MF

ATSAMD21J17A-MF - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAMD21J17A-MF is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 48 MHz, equipped with 128 KB of Flash and 16 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with an exposed thermal pad. It belongs to the SAM D21J family and integrates Functional Safety (FuSa) features, making it suitable for safety-critical consumer, industrial, and metering applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. The Cortex-M0+ core is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for deterministic real-time control in cost- and power-sensitive embedded systems. Within the broader semiconductor hierarchy, the SAM D21J sits in the category: 32-bit microcontroller -> ARM Cortex-M0+ MCU -> low-power MCU -> embedded processor -> semiconductor IC. Key features include 128 KB Flash with 4 KB read-while-write (RWW) section, 16 KB SRAM, full-speed USB 2.0 Device/Host with on-chip transceiver, up to six SERCOM (serial communication) interfaces supporting I2C, SPI, and UART, a 12-bit 350 ksps ADC, a 10-bit 350 ksps DAC, and two analog comparators. The device operates from 1.62 V to 3.63 V and supports industrial temperature grade (-40C to +125C). Architecture-wise, the SAM D21J combines an event-driven peripheral system (EVSYS) with DMA-driven SERCOM channels, allowing the CPU to remain in sleep modes while peripherals service asynchronous events. This contributes to the family's low active-power figure of around 70 uA/MHz and sleep currents below 5 uA with full SRAM retention. The integrated USB 2.0 Full-Speed transceiver eliminates external PHY cost and simplifies USB device designs. Typical applications include home-automation hubs, smart metering, industrial sensor nodes, USB human-interface devices (HIDs), consumer appliances, and wearable controllers. Its AEC-Q100 qualification (per Hotenda's listing for this part number) extends suitability into automotive body and chassis subsystems. When designing, ensure that the exposed pad on the QFN-64 is soldered to a sufficiently large copper pour to meet the 31.4 C/W theta_JA thermal budget, and place the 32.768 kHz crystal traces short and guarded for low-jitter RTC operation. This page consolidates distributor pricing, same-family SAM D20/D21 alternatives, and practical design guidance beyond what the manufacturer datasheet provides alone.

Cotação Contato
ATSAMD21J17A-MU - ARM Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD21J17A-MU

ATSAMD21J17A-MU - ARM Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAMD21J17A-MU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21J family, featuring 128KB of Flash, 16KB of SRAM, and a maximum CPU frequency of 48 MHz, housed in a 64-pin QFN (9x9 mm) package with an operating voltage range of 1.62V to 3.6V. The device integrates a full-speed USB 2.0 interface with on-the-go (OTG) support, a 12-bit ADC, a 10-bit DAC, and multiple SERCOM (serial communication) interfaces. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a low-power, 32-bit microcontroller core designed for embedded applications that require energy efficiency, deterministic interrupt handling, and a small footprint. As part of the broader ARM Cortex-M family, Cortex-M0+ parts sit below Cortex-M3/M4/M7 in performance but above 8-bit legacy MCUs in capability, making them a common choice for IoT sensors, consumer appliances, and battery-powered devices. The ATSAMD21J17A-MU sits within the voltage regulator (power management) hierarchy adjacent to its built-in DC-DC converter and POR (power-on reset) subsystems. Key features include a peripheral touch controller supporting up to 256 channels, a 32-bit real-time clock and calendar (RTC), a 32-bit hardware CRC, and a full-speed USB 2.0 Device/Host controller. The device also provides a 6-channel event system, multiple timers/counters (TC), and a capacitive touch acquisition interface (PTC), enabling human-interface applications such as touch buttons, sliders, and proximity sensing. The ATSAMD21J17A-MU uses a single-cycle hardware multiplier and a 2-stage pipeline to deliver up to 2.46 CoreMark/MHz at 48 MHz. Its SleepWalking peripherals and Event System let the CPU remain in deep sleep while peripherals continue to monitor inputs, achieving typical active current around 7 mA at full speed and standby current below 5 microamps with RTC retention. Typical applications include low-power IoT sensor nodes, USB HID peripherals (keyboards, mice, custom input devices), home automation controllers, consumer appliances, and industrial metering. The integrated USB, capacitive touch, and rich serial peripherals make it suitable as a single-chip solution that avoids external bridge ICs. When designing with this device, pay attention to the QFN thermal pad connection and follow Microchip's recommended PCB layout for the 9x9 mm 64-QFN. The integrated DC-DC converter requires an external inductor and capacitors as detailed in the SAM D21 datasheet. Firmware development is supported by Microchip Studio (formerly Atmel Studio) and the MPLAB Harmony v3 framework. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart, and LCSC, drop-in alternatives from the SAM D21 family, and practical design notes drawn from the Microchip SAM D21 datasheet family - information not consolidated on any single manufacturer or distributor page.

Cotação Contato
ATSAMD21J17A-MUT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21J17A-MUT

ATSAMD21J17A-MUT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip ATSAMD21J17A-MUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21J family, delivering 48 MHz CPU performance with 128 KB Flash and 16 KB SRAM in a 64-pin QFN (9x9 mm) package. It features the SERCOM serial-communication engine, a 12-bit DAC, a 14-channel 20-channel-capable event system, and Full-Speed USB with on-chip transceiver, all powered by 1.62 V to 3.63 V supply. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ MCU is an ultra-low-power 32-bit processor core designed by ARM Holdings for embedded systems, featuring the Thumb-2 instruction set, a single-cycle I/O port, and a Micro Trace Buffer. It sits within the broader taxonomy of MCU -> embedded microcontroller -> semiconductor device, and is typically deployed where deterministic real-time response, low active/standby power, and rich connectivity peripherals are required. Key differentiating features of the ATSAMD21J17A-MUT include 6 SERCOM modules (each configurable as UART/SPI/I2C), a 12-bit 350 ksps ADC with up to 14 analog channels, 2 analog comparators, a real-time clock with calendar mode, and a built-in Full-Speed USB 2.0 Device/Host controller with internal pull-up. The SAM D21J also carries Microchip Functional Safety (FuSa) documentation, simplifying IEC 60730 class B compliance for home appliances. The integrated Cortex-M0+ core reaches 2.46 CoreMark/MHz, giving roughly 118 CoreMark total throughput at maximum clock. Architecturally, the device uses a single-cycle hardware multiplier, single-cycle I/O port, and a tightly-coupled peripheral bridge that links SERCOM, ADC, DAC, timers, and USB to the AHB/APB bus matrix. The 128 KB dual-bank Flash supports read-while-write (RWW) operation against 4 KB RWW section, allowing live firmware updates without halting the application. The Event System interconnects peripherals without CPU intervention, reducing wake events and saving power. Typical applications include home automation controllers (thermostats, smart plugs, sensor hubs), consumer electronics (wearables, fitness bands, BLE bridges), metering (utility meters, energy monitors), industrial sensor nodes, USB HID peripherals (keyboards, mice, custom HID), and low-power IoT end-node devices. The wide operating voltage and rich SERCOM count make it well-suited for battery-powered designs with multiple radio or sensor interfaces. Design consideration: route the USB DP/DM traces as a 90-ohm differential pair and place the decoupling capacitor network (1 uF + 100 nF) within 2 mm of the VDDCORE pin to maintain signal integrity and core stability. For battery applications, leverage the integrated buck-boost converter with a 1 uH inductor to maximise efficiency at light loads. This page synthesises distributor pricing from DigiKey/Mouser/LCSC, drop-in alternatives within the SAM D21J family, and practical design notes that go beyond the manufacturer datasheet.

Cotação Contato
ATSAMD21J17D-AF - ARM Cortex-M0+ 48MHz MCU, 128KB Flash, TQFP-64 | Microchip
ATSAMD21J17D-AF

ATSAMD21J17D-AF - ARM Cortex-M0+ 48MHz MCU, 128KB Flash, TQFP-64 | Microchip

The Microchip Technology ATSAMD21J17D-AF is a low-power, high-performance ARM Cortex-M0+ based flash microcontroller in a 64-pin TQFP (10x10 mm) package with extended 125°C temperature rating. It operates at up to 48 MHz, integrates 128 KB of Flash and 16 KB of SRAM, and includes a full-speed USB 2.0 device interface plus a 12-bit ADC, 10-bit DAC, and SERCOM peripheral set. The device targets home automation, consumer, metering, and industrial applications where low power and integrated peripherals matter most. The ARM Cortex-M0+ is the smallest and most energy-efficient member of the Cortex-M family, designed for deeply embedded 8/16-bit replacement workloads. A microcontroller (MCU) integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a mix of analog and digital peripherals onto a single die. Compared with classic 8051 or PIC microcontrollers, Cortex-M0+ parts deliver a modern 32-bit Thumb-2 instruction set, deterministic nested-vector interrupts, and a vendor-neutral AMBA peripheral bus, while retaining ultra-low standby current. The SAMD21 family specifically adds Microchip's Event System (inter-peripheral signalling without CPU wake) and SleepWalking peripherals that remain clocked while the core sleeps. Key specifications of the ATSAMD21J17D-AF include 48 MHz maximum CPU clock, 128 KB Flash with 4 KB read-while-write region, 16 KB SRAM, six SERCOM channels configurable as UART/SPI/I2C, one full-speed USB 2.0 device port, up to 6 communication interfaces, and up to 52 programmable I/O pins. The integrated 12-bit ADC delivers up to 350 ksps, the 10-bit DAC up to 350 ksps, and the peripheral event system supports 12 channels. Operating voltage spans 1.62 V to 3.63 V with multiple low-power sleep modes down to sub-microamp standby. Architecturally, the ATSAMD21J17D-AF uses a single-cycle hardware multiplier, separate Flash and SRAM AHB-Lite buses, and a peripheral bridge that decouples SERCOM and event traffic from the CPU. The Full-Speed USB device controller includes an on-chip transceiver and internal pull-up, eliminating external components for HID, CDC, or vendor-class USB applications. The integrated SERCOM blocks can be reassigned at runtime, providing design flexibility when moving pins between UART, SPI, and I2C. Typical applications include home automation controllers (Zigbee/Matter bridges, smart thermostats), consumer products (USB HID peripherals, wearables), metering (gas/water/electricity counters with LCD), and industrial sensor hubs (Modbus nodes, 4-20 mA loop replacements). The extended 125°C temperature rating also supports automotive aftermarket and outdoor industrial use cases. When designing with this MCU, allocate at least one SERCOM channel for UART debug console, plan the USB DP/DN trace impedance for 90 ohm differential, and use the Event System to wake the CPU on peripheral triggers instead of polling. The 128 KB Flash and 16 KB SRAM are sufficient for an RTOS kernel plus an application, but compiler -Os and a memory pool allocator are recommended for production builds.

Cotação Contato
ATSAMD21J17D-AFT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21J17D-AFT

ATSAMD21J17D-AFT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip Technology ATSAMD21J17D-AFT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D21J family operating at up to 48 MHz with 128 KB of Flash and 16 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It targets Functional Safety (FuSa) capable designs and integrates a full-speed USB 2.0 device controller alongside a rich peripheral set including up to six SERCOM interfaces, a 12-bit ADC, 10-bit DAC, and multiple timer/counter channels. The 'D' suffix denotes the 128 KB Flash density variant within the SAM D21 family. An ARM Cortex-M0+ microcontroller is a low-power 32-bit processor core built on the ARMv6-M architecture, designed for energy-efficient embedded applications. It bridges the gap between 8-bit MCUs and higher-performance Cortex-M3/M4 cores, offering Thumb-2 instruction set compatibility, deterministic interrupt handling, and ultra-low sleep current. The SAM D21 line extends this with Microchip's peripheral event system and SERCOM configurability, allowing each serial interface to be reassigned as UART, SPI, or I2C at runtime. This hierarchy - Cortex-M0+ -> ARMv6-M core -> microcontroller -> embedded system - explains why the ATSAMD21J17D-AFT appears across consumer, industrial, and IoT designs. Key features include 128 KB Flash, 16 KB SRAM, 48 MHz CPU clock, full-speed USB 2.0 device with on-chip transceiver, six SERCOM modules, a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit DAC, and an extended operating temperature range up to +125 C. The device operates from 1.62 V to 3.63 V supply and integrates a brown-out detector, watchdog timer, and RTC. The TQFP-64 footprint simplifies hand-prototyping and optical inspection during early-stage development. Typical applications include home automation controllers, smart energy metering, consumer HID devices with USB, industrial sensor nodes, and wearables. The wide operating temperature range and FuSa-ready peripheral set also suit automotive aftermarket products and factory automation peripherals. When designing with this part, reserve the SERCOM pins carefully because each module must be mapped to specific pads through the I/O multiplexing matrix. Add a 1 µF plus 0.1 µF decoupling pair close to VDD and VDDIO pins, and follow USB-IF layout guidelines for the D+/D- traces to retain full-speed signaling margin. This page synthesizes distributor pricing, drop-in alternatives within the SAM D21 family, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a consolidated decision view.

Cotação Contato
ATSAMD21J17D-AU - 128KB Flash Cortex-M0+ MCU | Microchip
ATSAMD21J17D-AU

ATSAMD21J17D-AU - 128KB Flash Cortex-M0+ MCU | Microchip

The Microchip ATSAMD21J17D-AU is a 32-bit ARM Cortex-M0+ based flash microcontroller delivering up to 48 MHz CPU clock speed with 128 KB of Flash, 16 KB of SRAM and 4 KB of read-while-write (RWW) EEPROM emulation, housed in a 64-pin TQFP package for industrial temperature range -40C to +85C operation. The device integrates a USB 2.0 Full-Speed interface with on-chip transceiver, a 12-bit 20-channel ADC, 10-bit DAC, multiple SERCOM channels, and a 24-bit SERCOM-controlled timer counter system. An ARM Cortex-M0+ microcontroller is a low-power 32-bit processor core designed by ARM Holdings specifically for embedded applications that require deterministic performance at very low energy budgets. The Cortex-M0+ architecture is positioned within the broader microcontroller taxonomy as a streamlined descendant of the Cortex-M3/M4 family, optimized for cost-sensitive and energy-constrained designs while retaining full Thumb-2 instruction set compatibility. Within the SAM D family, this part occupies the mid-density tier with substantial Flash and SRAM for connected and sensor-rich applications. Key features include a 32-bit Cortex-M0+ core with single-cycle multiplier, Full-Speed USB Device/Host with on-chip transceiver, 12-bit 1 MSPS ADC with up to 20 channels, two 12-bit DAC outputs, six SERCOM serial communication interfaces configurable as UART/SPI/I2C, six 24-bit timer/counters, and a Peripheral Touch Controller (PTC) supporting up to 256 buttons. The integrated Event System enables deterministic inter-peripheral signaling without CPU intervention, while the SERCOM multiplexer allows flexible pin-mapping. Operating voltage spans 1.62V to 3.6V with multiple low-power sleep modes down to sub-microamp current levels. Typical applications include USB HID peripherals, low-power wireless sensor nodes, home automation controllers, smart metering endpoints, industrial sensor hubs, consumer wearables, and battery-powered IoT edge devices. The integrated USB PHY eliminates the need for external transceivers, reducing BOM cost and PCB area for Human Interface Devices such as keyboards, mice, and game controllers. When designing with this MCU, ensure the 32 kHz crystal load capacitor values match the crystal manufacturer's specification to maintain RTC accuracy. For USB applications, the D+ line requires an external pull-up resistor to VBUS through a soft-connect capable GPIO to support hot-plug and remote wake-up scenarios. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application reference designs, and practical design notes beyond the manufacturer datasheet.

Cotação Contato
ATSAMD21J17D-AUT - 128KB Flash Cortex-M0+ MCU | Microchip
ATSAMD21J17D-AUT

ATSAMD21J17D-AUT - 128KB Flash Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD21J17D-AUT is a low-power, high-performance 32-bit ARM Cortex-M0+ flash microcontroller delivering 48 MHz CPU performance with 128 KB of flash and 16 KB of SRAM, housed in a 64-pin TQFP package. This automotive-grade variant operates from 1.62 V to 3.63 V, integrates a full-speed USB 2.0 device controller, and offers rich peripherals including SERCOM, ADC, DAC, and PWM timers for embedded designs. What is a Cortex-M0+ microcontroller? The ARM Cortex-M0+ is the smallest and most energy-efficient member of the Cortex-M processor family, designed for cost-sensitive embedded applications requiring deterministic real-time response. Microcontrollers built around the Cortex-M0+ typically integrate flash, SRAM, analog peripherals, and communication interfaces on a single die, enabling compact system-in-package designs for IoT, consumer, and automotive edge devices. Key features of the ATSAMD21J17D-AUT include up to 6 SERCOM ports (each configurable as UART, SPI, or I2C), a 12-bit ADC with up to 20 channels, a 10-bit DAC, six 16-bit timers/counters, and a full-speed USB 2.0 device port. The device supports the Atmel/Microchip Event System for inter-peripheral signaling without CPU intervention and provides an integrated 32 kHz RTC with calendar mode. SleepWalking peripherals further reduce system power by waking only the necessary blocks during sensor sampling. The ATSAMD21J17D-AUT utilizes a Harvard-bus architecture with single-cycle I/O access through tightly coupled memory. Its 4 KB RWW (Read-While-Write) flash partition enables firmware updates without halting the application, simplifying OTA flows. The integrated power management unit supports Sleep, Idle, Standby, and Backup modes with sub-microamp current consumption in deep-sleep, making it suitable for battery-powered edge nodes. Typical applications include industrial sensor hubs, home automation controllers, consumer wearables, smart metering, USB human-interface devices (HID), and automotive body electronics. The combination of ARM Cortex-M0+ deterministic performance and Microchip's peripheral ecosystem makes this MCU especially attractive for designs migrating from 8-bit AVR or older 16-bit platforms. When designing with this device, pay attention to decoupling: place 100 nF ceramic capacitors as close as possible to every VDDCORE and VDDIO pin, plus a bulk 4.7 uF on the main rail. The USB D+/D- traces require 90 ohm controlled impedance and a precision 1.6 mm pair length match for full-speed certification. This page synthesizes distributor pricing, drop-in SAMD21 family alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single reference for sourcing, replacement, and layout decisions.

Cotação Contato
ATSAMD21J17D-CUT - 48MHz Cortex-M0+ MCU 128KB | Microchip
ATSAMD21J17D-CUT

ATSAMD21J17D-CUT - 48MHz Cortex-M0+ MCU 128KB | Microchip

The Microchip ATSAMD21J17D-CUT is a 32-bit ARM Cortex-M0+ flash MCU in the SAM D21/DA1 family, delivering 48 MHz CPU performance with 128 KB of Flash and 16 KB of SRAM, housed in a 64-ball UFBGA (5x5 mm) package. It integrates 52 I/O lines, full-speed USB 2.0, a 12-bit ADC up to 350 ksps, a 10-bit DAC, multiple SERCOM peripherals, PWM channels, and a 4 KB Read-While-Write flash partition, packaged in an industrial-grade CMOS process. A microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and configurable peripherals on a single die. Within the MCU taxonomy, the ATSAMD21J17D sits in the Cortex-M0+ class — the smallest and most energy-efficient ARM core for embedded control — and the SAM D21J family targets low-power connected and human-machine-interface applications. The D21 line bridges the gap between 8-bit PIC microcontrollers and higher-performance Cortex-M4 parts, giving engineers an accessible path to 32-bit ARM development with rich analog and connectivity peripherals. Key features include a 1.62 V to 3.63 V supply range, an operating temperature of -40 °C to +85 °C, event system for inter-peripheral signalling, sleepwalking peripherals that wake the CPU only when needed, and a built-in 32 kHz RTC. The device also provides up to 6 SERCOM channels (each configurable as UART/SPI/I2C), a Full-Speed USB 2.0 device/host with internal pull-up, and a 12-bit true-touch-friendly ADC with hardware oversampling. Compared with the SAM D20, the D21 adds USB and an enhanced event system at similar power consumption. Architecturally, the ATSAMD21J17D uses a single-cycle multiply hardware multiplier, a Nested Vectored Interrupt Controller (NVIC) with 32 lines, a Microchip Sleepwalking peripheral architecture, and a 6-channel DMA engine that offloads data movement. The 128 KB dual-bank Flash (64 KB + 64 KB with Read-While-Write) allows live firmware updates without downtime, and the integrated 16 KB SRAM supports comfortable protocol stacks such as USB and BLE. Typical applications include USB peripherals, IoT sensor nodes, consumer electronics, home automation, industrial metering, and human-machine interface control panels. This device also fits low-power wireless gateways where Cortex-M0+ efficiency, integrated USB, and SERCOM flexibility simplify BOM. When designing with this device, ensure the USB D+/D- traces are 90 ohm differential matched and that the 32.768 kHz crystal load capacitance matches the chosen crystal. Decouple VDDIN with a 1 µF plus 100 nF pair placed within 5 mm of the package balls to keep noise-sensitive analog measurements accurate. This page consolidates distributor pricing, drop-in alternatives, and applied design notes for engineers evaluating the ATSAMD21J17D-CUT — information synthesized from the manufacturer datasheet and distributor stock feeds, not found in any single supplier listing.

Cotação Contato
ATSAMD21J17D-MF - ARM Cortex-M0+ 48MHz 128KB Flash MCU | Microchip
ATSAMD21J17D-MF

ATSAMD21J17D-MF - ARM Cortex-M0+ 48MHz 128KB Flash MCU | Microchip

The Microchip ATSAMD21J17D-MF is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21J family with Functional Safety (FuSa) support, integrating 128KB of Flash and 16KB of SRAM, and housed in a 64-pin 9x9 mm QFN package with an extended temperature rating of -40C to +125C. It operates at up to 48 MHz, includes a USB 2.0 Full-Speed device with on-chip transceiver, and provides up to six SERCOM channels that can be configured as UART, SPI, or I2C. An ARM Cortex-M0+ microcontroller is an energy-efficient 32-bit core built around the Armv6-M architecture with single-cycle hardware multiply, Thumb-2 instruction support, and a tightly coupled Nested Vectored Interrupt Controller (NVIC). It sits at the entry level of the 32-bit MCU hierarchy, above 8-bit PIC/AVR cores, and below Cortex-M3/M4 parts in performance. Microchip's SAM D21J family adds Microchip-specific peripherals - SERCOM, ADC, DAC, and event system - while remaining binary-compatible with other Cortex-M0+ parts at the instruction level. Key features include 128KB of Flash with 4KB of read-while-write region, 16KB SRAM, a 12-bit ADC with up to 20 channels, a 10-bit DAC, six SERCOM interfaces, a full-speed USB 2.0 device port with on-chip PHY, two I2S/SSC channels, a cryptographic AES engine, and an event system for inter-peripheral signalling. The part also supports Microchip's Functional Safety (FuSa) features, simplifying IEC 60730 class B compliance for home appliances and similar regulated products. The device uses Microchip's proprietary peripheral touch controller (PTC) for touch sensing and offers SleepWalking functionality, allowing peripherals to wake the CPU only on relevant events. Power profiles are managed through eight Sleep modes and a backup domain with a dedicated RTC. The Cortex-M0+ core consumes roughly 90 uA/MHz active, and several sleep modes drop quiescent current below 5 uA. Typical applications include home automation and consumer devices, smart metering, industrial sensor hubs, USB peripherals (HID, CDC, mass storage), capacitive touch user interfaces, and small appliance control. The wide temperature range also makes it suitable for automotive and outdoor industrial deployments. The 64-QFN package is footprint-compatible with the larger ATSAMD21J18A and ATSAMD21G18A parts, enabling scalable BOMs. When designing with this part, ensure the 64-QFN exposed pad is soldered to a thermal copper pour with at least nine thermal vias, and that the USB DP/DM lines are routed as a 90-ohm differential pair. Designers should use Atmel Studio 7 / Microchip Studio and the ASF or MPLAB Harmony frameworks, and should not exceed the absolute maximum VDD of 3.8V. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing, comparing, and qualifying the ATSAMD21J17D-MF for new designs.

Cotação Contato
ATSAMD21J17D-MFT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
ATSAMD21J17D-MFT

ATSAMD21J17D-MFT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip Technology ATSAMD21J17D-MFT is a low-power, high-performance ARM Cortex-M0+ based flash microcontroller operating at up to 48 MHz, featuring 128KB of flash memory and 16KB of SRAM in a 64-pin QFN (9x9 mm) package. It integrates USB 2.0 Full-Speed device support, advanced analog peripherals including a 12-bit 350 ksps ADC and 10-bit DAC, and Functional Safety (FuSa) features for safety-critical applications. The device is part of the SAM D21J family with extended temperature range up to 125°C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one silicon die, forming the heart of nearly every embedded electronic product. Modern 32-bit MCUs based on the ARM Cortex-M architecture dominate the embedded market because they balance deterministic real-time performance, ultra-low power consumption, and a vast software ecosystem. The SAM D21 family specifically targets low-power applications through Microchip's proprietary SleepWalking peripheral operation, which lets timers, SERCOM, and ADC continue sampling while the CPU remains asleep. Key features of the ATSAMD21J17D-MFT include 128KB flash with 4KB read-while-write (RWW) section, six SERCOM communication interfaces configurable as UART/SPI/I2C, a full-speed USB 2.0 device interface, two I2S interfaces, one 12-bit ADC with up to 20 channels, one 10-bit DAC, and up to 52 GPIO pins. It supports 1.62V to 3.63V supply voltage with on-chip DC-DC converter for low-power operation, and provides comprehensive clock management including 48 MHz Digital Frequency Locked Loop (DFLL48M) and 32.768 kHz oscillator. The architecture combines an ARM Cortex-M0+ core (Thumb-2 instruction set, single-cycle I/O port access, hardware multiplier) with Microchip's Event System for zero-latency inter-peripheral signaling and a Peripheral Touch Controller (PTC) supporting capacitive touch sensing. The Memory Protection Unit (MPU) and on-chip FPU emulation library enable deterministic interrupt response and floating-point arithmetic in C. Typical applications include home automation and smart lighting controllers, industrial sensor hubs and metering, USB HID peripherals such as keyboards and mice, wearable fitness devices, consumer toys with capacitive touch UIs, and IoT edge nodes. The Functional Safety (FuSa) build option also suits medical and safety-critical control loops. When designing with this device, choose an external 32.768 kHz crystal for RTC accuracy and provide adequate decoupling on both VDD and VDDIO; the on-chip DC-DC requires an external inductor and capacitor network per the datasheet reference schematic. PCB layout should keep the QFN exposed pad soldered to a continuous ground copper pour for thermal dissipation.

Cotação Contato
ATSAMD21J17D-MU - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD21J17D-MU

ATSAMD21J17D-MU - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAMD21J17D-MU is a 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D21J family, featuring 128KB of Flash, 16KB of SRAM, and a 48MHz CPU core in a 64-pin QFN (9x9 mm) package with industrial temperature rating (-40C to +85C). What is an ARM Cortex-M0+ microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit core, optimized for cost-sensitive embedded applications that still need 32-bit performance and modern peripherals. The ATSAMD21J17D-MU integrates this core with 128KB of embedded Flash, 16KB SRAM, a 4KB read-while-write (RWW) Flash section, and a rich peripheral set including USB, CAN, SERCOM, ADC, DAC, and timers. Key features of the ATSAMD21J17D-MU include the Cortex-M0+ core with 48MHz operation (96 CoreMark), full-speed USB 2.0 with on-chip transceiver, an 8-channel 12-bit 350ksps ADC, a 10-bit 350ksps DAC, up to six SERCOM (serial communication) interfaces, six 16-bit timers/counters, and a Peripheral Touch Controller (PTC) for capacitive touch interfaces. The device operates from 1.62V to 3.63V and integrates an Event System for deterministic peripheral-to-peripheral signaling without CPU intervention. The SAM D21 architecture combines the Cortex-M0+ core with Microchip's proprietary peripheral set, achieving low active current and flexible SleepWalking power management per peripheral. The 64-QFN exposed-pad package provides 52 programmable I/O pins and excellent thermal performance for hand-held and industrial designs. Typical applications include USB human-interface devices (HID), home automation gateways, low-power sensor nodes, industrial control boards, consumer remote controls, and capacitive-touch user interfaces. The combination of USB, ADC/DAC, and flexible serial interfaces addresses a broad range of connected-product designs. When designing with this device, pay close attention to decoupling (one 100nF plus one 4.7uF bypass near each supply pin) and to the exposed thermal pad requirement for proper heat dissipation. Programmability is supported by Atmel Studio/Microchip Studio, MPLAB X IDE, and the SAMD21 support package in the Arduino core, with debug via SWD through the standard 2-wire interface. This page synthesizes distributor pricing, drop-in SAMD21 alternatives, and practical hardware-design notes not found in the manufacturer datasheet. Pricing is referenced as of 2026-09-21 and reflects authorized-distributor data; consult distributors for current stock and lead time.

Cotação Contato
ATSAMD21J18A-AF - 48MHz Cortex-M0+ 256KB Flash MCU | Microchip
ATSAMD21J18A-AF

ATSAMD21J18A-AF - 48MHz Cortex-M0+ 256KB Flash MCU | Microchip

The Microchip ATSAMD21J18A-AF is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21J family, integrating 256KB of Flash and 32KB of SRAM while operating at up to 48MHz (2.46 CoreMark/MHz), housed in a 64-pin TQFP (10x10 mm) industrial-grade package. It is built on a low-power architecture designed for always-on connected products, drawing as little as 70 uA/MHz in active mode and supporting deep-sleep currents in the single-digit microamp range. An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) processor core targeting ultra-low-power embedded applications. The Cortex-M0+ belongs to the ARM Cortex-M family -> 32-bit MCU core -> embedded processor -> semiconductor. It executes the Thumb/Thumb-2 instruction set, includes a single-cycle hardware multiplier, and is paired in the SAM D21 with Microchip's event system, SERCOM peripherals, and a rich analog set. By occupying the low-power end of the ARM-M lineup, Cortex-M0+ parts are commonly chosen over Cortex-M3/M4 when deterministic control, low BOM cost, and battery life outweigh raw compute. The ATSAMD21J18A-AF features a 12-bit, up to 350 ksps ADC with hardware oversampling, a 12-bit 1 Msps DAC, two analog comparators, six SERCOM modules (each configurable as UART/USART/SPI/I2C), up to 52 GPIO, and a full-speed USB 2.0 device/host interface. The integrated 2.46 CoreMark/MHz efficiency is supported by a single-cycle hardware multiplier, a deterministic nested-vectored interrupt controller (NVIC), and dual-bank Flash for safe in-field OTA updates. Typical applications include IoT sensor nodes, home automation gateways, smart appliances, industrial metering, wearable fitness bands, and consumer HMI with USB-CDC connectivity. The wide 1.6V to 3.6V supply range, on-chip FPU-less Cortex-M0+ pipeline, and dual-bank Flash make it well suited to mains-powered as well as coin-cell products. When designing with this part, reserve SERCOM channel assignments early because each SERCOM is pin-muxed and conflicts are easy to miss at low pin counts. Always enable the brown-out detector (BOD) and configure the SysTick for low-power tickless RTOS operation to maximize battery life. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes that are not bundled together on the manufacturer datasheet PDF.

Cotação Contato
ATSAMD21J18A-AFT - 32-bit Cortex-M0+ MCU, 256KB Flash, 64-TQFP | Microchip
ATSAMD21J18A-AFT

ATSAMD21J18A-AFT - 32-bit Cortex-M0+ MCU, 256KB Flash, 64-TQFP | Microchip

The Microchip ATSAMD21J18A-AFT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D21J family, delivering 48 MHz CPU performance with 256 KB Flash and 32 KB SRAM in a 64-pin TQFP (10x10 mm) package. It is specified for the extended industrial temperature range of -40C to +125C and operates from a 1.62 V to 3.63 V supply. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The Cortex-M0+ core from ARM is the smallest and most energy-efficient ARM core, optimized for deterministic embedded control and low active power. The SAM D21J family extends this core with rich peripherals including SERCOM, ADC, DAC, and event system, placing the MCU in the broader hierarchy: microcontroller -> embedded processor -> semiconductor device. Key features of the ATSAMD21J18A-AFT include 6 SERCOM serial communication interfaces (each configurable as UART/SPI/I2C), a 12-bit 1 MSPS ADC with up to 20 channels, a 10-bit DAC, full-speed USB device/host, and a 2-channel DMAC for low-overhead data movement. The device supports sleepwalking peripherals and idle/standby modes that drop quiescent current to single-digit microamps, enabling years of battery life in sensor applications. The ATSAMD21J18A-AFT is functionally safety-capable (FuSa) and integrates the ARM Cortex-M0+ core with single-cycle multiplier, hardware divide, and a Nested Vectored Interrupt Controller (NVIC). A 32-channel event system allows peripherals to trigger one another without CPU intervention, reducing wake latency and energy. The device also includes a segmented LCD controller variant in the family, but the -J18A part focuses on connectivity-rich general-purpose applications. Typical applications include home automation gateways, IoT sensor nodes with USB connectivity, industrial metering, low-end consumer HMI, smart thermostats, and wearable fitness devices. The extended -40C to +125C temperature range supports outdoor and industrial enclosures. Designers should plan PCB layout carefully: place the 0.1 uF decoupling capacitor within 2 mm of each VDD pin, provide a solid ground pour under the device, and route the D+/D- lines as a 90-ohm differential pair with no stubs. The internal voltage regulator requires both a VDDCORE and VDDIO supply pin to be decoupled. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
ATSAMD21J18A-AU - ARM Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD21J18A-AU

ATSAMD21J18A-AU - ARM Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAMD21J18A-AU is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D21 family, featuring 256KB of Flash and 32KB of SRAM in a 64-pin TQFP (10x10 mm) package. The device operates at up to 48 MHz, reaching 2.46 CoreMark/MHz, and supports a 1.62V to 3.6V supply voltage with multiple low-power sleep modes. The suffix –AU denotes the TQFP-64 tray packaging variant of the SAM D21J series. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash for code and SRAM for data), and a rich set of peripherals on a single silicon die. ARM Cortex-M0+ cores are the smallest and most energy-efficient members of the ARM Cortex-M family, optimized for deterministic embedded control and ultra-low-power operation. The SAM D21 family specifically targets battery-powered and always-on IoT, consumer, and industrial applications where low active current, deep-sleep retention, and integrated analog peripherals reduce bill-of-materials cost. Key features include a full-speed USB 2.0 device/host interface, up to six SERCOM configurable serial communication modules, a 12-bit 350 ksps ADC with up to 20 channels, two 12-bit DACs, three analog comparators, up to 52 GPIO pins with interrupt capability, and a powerful peripheral event system for inter-peripheral signaling without CPU intervention. Hardware touch support, a CRC engine, and a true random number generator (TRNG) are also integrated. The ATSAMD21J18A-AU is built on a low-leakage process and features an advanced peripheral touch controller, two 24-bit timers, RTC, and a 16-bit PWM with dead-time generators suitable for motor and power control. Its bootloader is pre-loaded in ROM, enabling in-system programming over USB or UART without external programmer hardware. Typical applications include home automation gateways, smart metering, industrial sensor nodes, USB HID input devices, LED lighting controllers, wearable fitness bands, and consumer electronics with capacitive touch user interfaces. The wide 1.62–3.6V supply range and integrated USB PHY simplify designs that previously required an external voltage regulator. When designing with the ATSAMD21J18A-AU, consider the thermal envelope of the TQFP-64 package, ensure proper decoupling with 100 nF + 4.7 uF bulk capacitors near each supply pin, and follow the trace-impedance recommendations for the USB differential pair (D+/D-) to maintain USB compliance. This page synthesizes live distributor pricing, drop-in SAMD21J18A family variants, and practical design notes that are not present in the manufacturer datasheet PDF, helping engineers select the right SAMD21 member for production.

Cotação Contato
ATSAMD21J18A-AUT - 32-bit Cortex-M0+ MCU 256KB Flash 64-TQFP | Microchip
ATSAMD21J18A-AUT

ATSAMD21J18A-AUT - 32-bit Cortex-M0+ MCU 256KB Flash 64-TQFP | Microchip

The Microchip Technology ATSAMD21J18A-AUT is a low-power, high-performance 32-bit ARM Cortex-M0+ microcontroller running up to 48 MHz, with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package supplied on Tape & Reel. It belongs to the SAM D21J family, the highest-pin-count variant of the SAM D21 series with the largest I/O count of the family. What is a Cortex-M0+ microcontroller? An MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The ARM Cortex-M0+ is the most energy-efficient core in the Cortex-M family, optimized for low-power embedded designs. The ATSAMD21J18A-AUT sits in the power-management IC and microcontroller hierarchy as an industrial-grade general-purpose MCU suitable for home automation, consumer, metering, and industrial applications. Key features of this part include a full-speed USB 2.0 device/host with on-chip transceiver, up to six SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 20 channels, two analog comparators, a 10-bit 350 ksps DAC, up to six 16-bit timer/counters, a 32-bit RTC, and a Peripheral Touch Controller (PTC) for capacitive touch sensing. The device operates from 1.62 V to 3.63 V and includes a built-in DMA controller, Event System, and SleepWalking peripherals for sub-microamp sleep current. The ATSAMD21J18A-AUT uses a two-cycle pipeline Harvard architecture with single-cycle I/O access and a hardware multiplier, providing 0.9 DMIPS/MHz CoreMark performance. On-chip voltage regulation and an integrated POR/BOD circuit simplify power-tree design and reduce BOM count in 3.3 V systems. Typical applications include IoT sensor nodes, USB HID devices, smart-home controllers, industrial HMI panels, and low-power wireless sensor hubs. The combination of USB, SERCOM, ADC, DAC, and touch sensing makes the part flexible for multi-protocol gateways. Designers should consult the device 40001882A datasheet for full peripheral mapping and the SAME70/SAM D21 Xplained Pro board schematics for reference designs.

Cotação Contato
ATSAMD21J18A-CU - 256KB Flash 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J18A-CU

ATSAMD21J18A-CU - 256KB Flash 48MHz Cortex-M0+ MCU | Microchip

The Microchip ATSAMD21J18A-CU is a low-power, high-performance 32-bit ARM Cortex-M0+ flash microcontroller in the SAM D21J family, featuring 256 KB of Flash and 32 KB of SRAM, packaged in a 64-ball UFBGA (CU) with operating voltage 1.62V to 3.6V and a maximum CPU frequency of 48 MHz (delivering up to 2.46 CoreMark/MHz). The device integrates six SERCOM serial-communication channels (configurable as UART/SPI/I2C), one full-speed USB 2.0 interface with embedded PHY, a 12-bit 1 MSPS ADC, 10-bit DAC, up to 8 timer/counter channels, and a 48 MHz Digital Frequency Locked Loop (DFLL48M) with on-chip temperature and voltage references. According to the Microchip SAM D21 family datasheet, the part is rated for the industrial 85C temperature grade and supports sleepwalking peripherals for event-driven low-power operation. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) MCU implementing the ARMv6-M architecture; it sits in the hierarchy microcontroller -> 32-bit MCU -> embedded processor, with Cortex-M0+ being the smallest, lowest-power core in the ARM Cortex-M lineup. Microcontrollers in this class integrate Flash, SRAM, peripherals, and a CPU core into a single chip, targeting deterministic embedded control in cost- and power-constrained designs. The ATSAMD21J18A is part of Microchip's Atmel SMART SAM D family, designed for low-power connected embedded applications. Key features of the ATSAMD21J18A-CU include 256 KB Flash with error correction, 32 KB SRAM, six SERCOM peripherals that can be mapped to almost any GPIO, a 12-channel 12-bit ADC with oversampling, a 10-bit DAC, and a capacitive touch hardware peripheral. The CPU is a 32-bit Cortex-M0+ with single-cycle hardware multiply, MPU, and Micro Trace Buffer support for debug, while the on-chip DFLL48M and fractional PLL enable precise 48 MHz operation from low-frequency crystal references. Architecturally, the ATSAMD21J18A uses a low-leakage process with multiple power domains and idle/standoff/backup sleep modes reaching below 1 uA retention current. The peripheral event system allows hardware-triggered actions without CPU intervention, and the SERCOM channel architecture lets each instance be software-configured as UART, SPI, or I2C for flexible pin allocation. Typical applications include home automation gateways, low-power wireless sensor nodes (e.g. LoRa/BLE host MCUs), USB HID devices, consumer electronics HMI, industrial metering, and battery-powered IoT endpoints. The USB PHY and SERCOM channels support direct USB device stacks without an external PHY, simplifying HID/CDC/Mass Storage product designs. For design-in, plan the UFBGA-64 land pattern carefully - this 0.65 mm-pitch BGA requires NSMD pads, microvia fan-out, and careful reflow profiling to avoid tombstoning. Also confirm the chosen compiler toolchain (GCC arming-none-eabi, IAR, Keil) supports the Cortex-M0+ core with the SAM D21 device pack. This page synthesizes distributor pricing, qualified drop-in alternatives, and engineering design notes beyond the manufacturer datasheet, giving procurement and design engineers a single source for selection, replacement, and BOM validation.

Cotação Contato
ATSAMD21J18A-CUT - 256KB Flash Cortex-M0+ MCU 64-BGA | Microchip
ATSAMD21J18A-CUT

ATSAMD21J18A-CUT - 256KB Flash Cortex-M0+ MCU 64-BGA | Microchip

The Microchip ATSAMD21J18A-CUT is a low-power, high-performance 32-bit ARM Cortex-M0+ flash microcontroller with 256KB of flash and 32KB of SRAM, operating up to 48 MHz in a 64-ball UFBGA package (CUT suffix denoting the UFBGA-64 package, tape and reel). It integrates up to 256KB flash, 32KB SRAM, a full-speed USB 2.0 device, six SERCOM interfaces, a 12-bit 350ksps ADC, 10-bit DAC, and up to 48 GPIO pins in the 64-pin package option, supporting 1.6V to 3.6V supply operation. A microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and programmable peripherals on a single chip, forming the smallest complete compute platform in an embedded system. The Cortex-M0+ family sits at the most energy-efficient end of the ARM Cortex-M hierarchy, prioritizing low power and deterministic interrupt response over peak throughput. Microchip's SAM D21 family extends this with rich analog, USB, and capacitive touch peripherals, placing the SAM D21 in the broader taxonomy: ARM Cortex-M0+ -> Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. It is pin-compatible with the SAM D20 family, enabling easy upgrades. Key features include a 2.46 CoreMark/MHz performance figure, six SERCOM-configurable serial channels, an Event System for inter-peripheral signaling without CPU intervention, and a Peripheral Touch Controller supporting buttons, sliders, and wheels. The device provides 6 channel DMA, two I2S interfaces, and a built-in full-speed USB 2.0 device with on-chip transceiver, simplifying USB-connected designs. Architecturally, the SAM D21 uses a single-cycle I/O port write architecture and an efficient bus matrix that allows simultaneous access to flash, SRAM, and peripherals. SleepWalking peripherals draw near-zero current while still being able to wake the core on events, and the Event System routes peripheral signals without CPU involvement. Six flexible SERCOM peripherals can each be independently configured as UART, SPI, or I2C, removing the need for fixed peripheral counts. Typical applications include USB-enabled home automation nodes, consumer HID devices like keyboards and mice, industrial sensor hubs, smart energy metering, capacitive touch user interfaces, and wearable fitness trackers. The combination of low active power, deep-sleep modes below 1 µA, and integrated USB makes the ATSAMD21J18A a common choice for battery-powered connected devices. When designing with this part, allocate adequate decoupling (100 nF per VDD pin plus a bulk 4.7 µF), route the USB D+/D- traces as a 90 Ω differential pair, and verify the chosen boot configuration matches your fuse settings. The 64-ball UFBGA requires PCB via-in-pad or careful escape routing; for prototypes, consider the QFN/64 variant instead. This page synthesizes distributor pricing, same-brand pin-compatible variants, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
ATSAMD21J18A-MF - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAMD21J18A-MF

ATSAMD21J18A-MF - 48MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD21J18A-MF is a 32-bit ARM Cortex-M0+ flash microcontroller operating at up to 48 MHz with 256 KB Flash and 32 KB SRAM, housed in a 64-pin QFN (9x9 mm) package. The device integrates a 12-bit ADC, 10-bit DAC, multiple SERCOM interfaces, full-speed USB, and a 2.46 CoreMark/MHz performance rating, making it suitable for connected sensor nodes, consumer electronics, and industrial control systems. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, peripherals, and I/O on a single silicon die. The Cortex-M0+ is the most energy-efficient member of the ARM Cortex-M family, designed for deterministic real-time embedded workloads with a two-stage pipeline, single-cycle I/O port access, and an optional Micro Trace Buffer. SAM D21 microcontrollers extend the M0+ with Microchip's peripheral set, event system, and SleepWalking peripherals, positioning the family between 8-bit AVR/PIC parts and higher-cost Cortex-M4 parts. Key features include 256 KB Flash, 32 KB SRAM, 48 MHz max CPU clock, a 12-bit 350 kSPS ADC with up to 20 channels, a 10-bit 350 kSPS DAC, six SERCOM modules configurable as UART/SPI/I2C, one full-speed USB 2.0 device/host port, up to 52 GPIO, and a 1.62-3.63 V operating voltage range. The device supports Sleep, Idle, Standby, and Backup sleep modes with typical active current around 3 mA at 48 MHz and standby currents in the single-digit microamp range. The SAM D21 architecture pairs the Cortex-M0+ core with a 4-channel DMA controller, an Event System for inter-peripheral signalling without CPU intervention, and a SleepWalking power-management scheme that wakes selected peripherals only when matched events occur. Hardware math accelerators and CRC-32 reduce firmware overhead for sensor-fusion and packet-handling tasks. Debug is via SWD with an optional Micro Trace Buffer; programming is supported through Atmel-ICE, MPLAB X, and the Arduino IDE via the MKR/Zero board variants. Typical applications include smart-home and home-automation hubs, low-power wireless sensor nodes, USB HID peripherals, battery-powered consumer devices, industrial metering, and motor-control front-ends. The wide 1.62-3.63 V supply range and integrated USB transceiver simplify lithium-battery designs with bus-powered accessories. AEC-Q100 variants are available in the SAM D21J family for automotive body and chassis applications. When designing with this part, budget Flash and SRAM for bootloader + application coexistence and verify the 64-pin QFN PCB footprint against the manufacturer's land-pattern recommendation. Use the SERCOM multiplexing tables early in the pin-out assignment to avoid conflicting peripheral mappings. This page synthesizes distributor pricing, drop-in pin-compatible alternatives across the SAM D20/D21 families, and practical design notes not collated in the manufacturer datasheet, giving engineers a one-stop view for sourcing and substitution decisions.

Cotação Contato