ADM202JNZ vs ADM202JN Comparação
Comparação detalhada lado a lado de ADM202JNZ por Analog Devices e ADM202JN por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ADM202JNZ | ADM202JN |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Obsolete |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Transceiver Configuration | 2 drivers and 2 receivers | — |
| Maximum Transmission Rate | 120 kbit/s | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Charge-Pump Capacitor Value | 0.1 µF | — |
| RS-232 Output Level | Approximately ±10 V | — |
| Receiver Input Voltage Tolerance | ±30 V | — |
| Corrente de alimentação | 2.5 mA | — |
| Interface Standard | TIA/EIA-232-E and V.28 | — |
| Technology | BiCMOS | — |
| Encapsulamento | 16-pin PDIP, 0.300 inch body width, 7.62 mm lead pitch | 16-PDIP |
| Tipo de montagem | Through-hole | Through hole |
| Shipping Package | Tube | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Dual RS-232 line driver/receiver transceiver |
| Transmission Rate | — | 120 kB/s |
| Tensão de alimentação | — | Single 5 V |
| Charge-Pump Capacitor | — | 0.1 µF |
| RS-232 Output Levels | — | ±10 V |
| RS-232 Standard Compatibility | — | TIA/EIA-232-E and V.28 |
| On-Board DC-DC Converter | — | Yes |
| Duplex Mode | — | Full duplex |
| Temperatura de operação | — | 0 °C to 70 °C |
| Supply Range | — | 4.5 V to 5.5 V |
| Driver Slew Rate | — | Fast driver slew rates; numerical value not provided |
| ESD Protection | — | 15 kV mentioned in a public product-document snippet; test conditions not provided |