ADM232LAN vs ADM232LJNZ Comparação
Comparação detalhada lado a lado de ADM232LAN por Analog Devices e ADM232LJNZ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ADM232LAN | ADM232LJNZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Obsolete | Ativo |
| Product Type | 2/2 RS-232 transceiver | — |
| Number of Transmitters | 2 | — |
| Number of Receivers | 2 | — |
| Tensão de alimentação | 5 V | — |
| Taxa de dados | 120 kB/s | — |
| Interface Standard | EIA-232-E and V.28 | RS-232 |
| On-Board DC-DC Converter | Yes | — |
| RS-232 Output Swing | 9 V | — |
| External Charge-Pump Capacitor | 1 µF | — |
| Low-Power Shutdown | Yes | — |
| Receivers Active During Shutdown | Yes | — |
| Maximum Receiver Input Voltage | 30 V | — |
| Encapsulamento | 16-pin PDIP | 16-pin PDIP |
| Tipo de montagem | Through-hole | Through-hole |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Corrente de alimentação | [DATA_NEEDED: supply current] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Device Type | — | RS-232 transceiver |
| Driver and Receiver Configuration | — | 2 drivers and 2 receivers |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Logic Technology | — | 5 V CMOS |
| Maximum Data Rate | — | 100 kbps |
| Supported Signaling Standards | — | EIA-232-E and V.28 |
| Número de pinos | — | 16 pins |
| Production Status | — | Production |
| Negative Supply Requirement | — | Not required at the device interface |
| Corrente de repouso | — | [DATA_NEEDED: quiescent current] |
| External Charge-Pump Capacitors | — | [DATA_NEEDED: charge-pump capacitor count and values] |