BTS70021EPPXUMA1 vs BTS70041EPPXUMA1 Comparação
Comparação detalhada lado a lado de BTS70021EPPXUMA1 por Infineon e BTS70041EPPXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ AtivoInfineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ AtivoComparação de especificações
| Parâmetro | BTS70021EPPXUMA1 | BTS70041EPPXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,32 | $1,45 |
| Product Family | PROFET+2 12V | — |
| Topologia | Smart High-Side Switch, N-Channel MOSFET | — |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | Yes (analog proportional to load current) |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | Yes (low-duty cycle supported via integrated charge pump) |
| Faixa de temperatura de operação | -40 C to +150 C junction | — |
| Encapsulamento | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14-22 (14-pin) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| Status RoHS | Compliant (Green Product) | Compliant |
| Part Family | — | HIC-PROFET +2 12V |
| Switch Type | — | High-Side N-Channel Smart Power Switch |
| Typical R_DS(on) | — | 4 mOhm at 25 °C |
| Nominal Load Current | — | 15 A (DC) |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Load-Dump Robustness | — | [DATA_NEEDED: load dump rating] |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Diagnostic Enable Pin (DEN) | — | Yes |
| Embedded Protection | — | Over-current, short-circuit, over-temperature, reverse battery |
| Temperatura de operação | — | -40 °C to +150 °C (junction) |
| Nível MSL | — | MSL3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified |