BTS70402EPGXUMA1 vs BTS51202EKAXUMA1 Comparação
Comparação detalhada lado a lado de BTS70402EPGXUMA1 por Infineon e BTS51202EKAXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS70402EPGXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $3,18 | $1,68 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Função | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 2 |
| Configuração de saída | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Faixa de temperatura de operação | -40 °C to +150 °C junction | — |
| Encapsulamento | PG-TSDSO-14 (exposed thermal pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Topologia | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Temperatura de operação | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| Status RoHS | — | Compliant |