BTS724GXUMA1 vs BTS5014SDAAUMA1 Comparação
Comparação detalhada lado a lado de BTS724GXUMA1 por Infineon e BTS5014SDAAUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS724GXUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $3,21 | $1,55 |
| Topologia | 4-channel high-side switch | N-Channel vertical power MOSFET with charge pump |
| Número de saídas | 4 | — |
| Configuração de saída | High-side | — |
| On-Resistance (RDS(on)) per Channel | 200 mOhm typical at 25 C | — |
| Continuous Load Current per Channel | 3 A | — |
| Supply Voltage (Vbb) | 5.5 V to 38 V | — |
| Operating Supply Voltage Range | 5.5 V to 38 V | — |
| Overvoltage Clamp (Vbb(AZ)) | Data needed - see datasheet | — |
| Standby Current | 8 mA typical (per datasheet family) | [DATA_NEEDED: standby current uA] |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes - per-channel status flag | — |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage | — |
| Demagnetization | Fast demagnetization for inductive loads | — |
| Faixa de temperatura de operação | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Encapsulamento | PG-DSO-20 (20-pin, exposed thermal considerations) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Nível MSL | 3 | — |
| Status RoHS | Compliant | Compliant |
| Technology | Infineon Smart SIPMOS (vertical power MOSFET + charge pump) | — |
| Family | Classic PROFET 24V automotive smart high-side switch | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Nominal Load Current | — | 6 A |
| Tensão de alimentação de operação | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Limitação de corrente | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |