BTT60302ERBXUMA1 vs BTS70202EPAXUMA1 Comparação
Comparação detalhada lado a lado de BTT60302ERBXUMA1 por Infineon e BTS70202EPAXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Infineon
BTT60302ERBXUMA1 - 4A Dual-Channel High-Side PROFET Switch | Infineon
BTT60302ERBXUMA1 ✓ AtivoComparação de especificações
| Parâmetro | BTT60302ERBXUMA1 | BTS70202EPAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,21 | $1,62 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET (Protected MOSFET) | — |
| Switch Type | High-Side N-Channel Power Switch | — |
| Número de saídas | 2 | — |
| Input-Output Ratio | 1:1 | — |
| Maximum Output Current (per channel) | 4 A | — |
| Typical Rds(on) | 32 mOhm | — |
| Faixa de tensão de entrada | -0.3 V to 6 V (logic) | — |
| Load Voltage Range | 24 V / 48 V nominal (PROFET 24V/48V family) | — |
| Encapsulamento | PG-TDSO-14-31 (14-pin SOIC with Exposed Pad) | PG-TSDSO-14-22 (exposed pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Faixa de temperatura de operação | -40 C to +150 C | -40 C to +150 C (junction) |
| Automotive Qualification | AEC-Q100 | — |
| Integrated Protection | Over-current, over-voltage, over-temperature, short-circuit, reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | Analog current sense (IS pin) per channel |
| Lead-Free / RoHS | Yes / Compliant | — |
| Nível MSL | [DATA_NEEDED: MSL level] | — |
| Packing | Tape & Reel (Rexx suffix per Infineon naming) | Tape & Reel (XUMA1 suffix) |
| Product Type | — | Smart High-Side Power Switch (dual channel) |
| Technology | — | SMART7 (PROFET family) |
| Number of Channels | — | 2 |
| Configuração de saída | — | High-side, 1:1 N-Channel MOSFET per channel |
| Continuous Load Current (per channel) | — | 2.5 A |
| Total Device Load Current | — | 5 A |
| On-State Resistance (typ, per channel) | — | 30 mΩ |
| Operating Voltage Range (Vbb) | — | 6 V to 18 V (load dump tolerant) |
| Current Limit (typ) | — | 12 A (selectable) |
| Protection Features | — | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Status RoHS | — | Compliant |