CP2102N-A02-GQFN28R vs CP2102N-A01-GQFN28R Comparação
Comparação detalhada lado a lado de CP2102N-A02-GQFN28R por Silicon Labs e CP2102N-A01-GQFN28R por Silicon Labs. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Silicon Labs
CP2102N-A02-GQFN28R USB-to-UART Bridge, QFN28 | Silicon Labs (Tape & Reel)
CP2102N-A02-GQFN28R ✓ AtivoSilicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ AtivoComparação de especificações
| Parâmetro | CP2102N-A02-GQFN28R | CP2102N-A01-GQFN28R |
|---|---|---|
| Marca | Silicon Labs | Silicon Labs |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $2,35 | $2,31 |
| Função | USB 2.0 to UART Bridge Controller | — |
| Protocol | USB 2.0 Full-Speed | — |
| Supply Voltage (VDD) | 3 V to 3.6 V | 3.0 V to 3.6 V |
| I/O Voltage (VIO) | 1.8 V to VDD | — |
| Maximum Baud Rate | 3 Mbaud | — |
| USB Speed | Full-Speed (12 Mbps) | — |
| Digital I/O Pins | 7 | — |
| Internal Regulator Output | 3.3 V | 3.3 V (up to ~100 mA) |
| Internal Regulator Current | Up to 100 mA (external load) | — |
| Internal Oscillator | 48 MHz (no external crystal required) | — |
| ROM for Descriptors | 960 bytes (one-time programmable) | — |
| UART Data Bits | 5, 6, 7, or 8 (programmable) | — |
| Hardware Flow Control | RTS/CTS supported | — |
| Encapsulamento | QFN-28 (5x5 mm) | 28-QFN (5x5 mm) with exposed pad |
| Tipo de montagem | Surface Mount | Surface Mount |
| Temperatura de operação | -40C to +85C | -40 C to +85 C |
| Status RoHS | Compliant | Compliant |
| Product Type | — | USB to UART Bridge Controller |
| Series | — | USBXpress |
| USB Standard | — | USB 2.0 Full-Speed (12 Mbps) |
| UART Interface | — | USB 2.0 UART |
| Number of UART Channels | — | 1 |
| Taxa de dados | — | 300 baud to 1 Mbaud |
| Supply Voltage (VBUS) | — | 4.0 V to 5.25 V |
| GPIO | — | Yes (multiple, signal-configurable) |
| Reset Pin | — | RSTb (active-low hardware reset) |
| On-chip Oscillator | — | Yes (no external crystal required) |
| Nível MSL | — | MSL3 (per JEDEC J-STD-020) |
| Host Driver | — | Silicon Labs CP210x VCP driver |