DS90C402M vs SN65MLVD200ADR Comparação

Comparação detalhada lado a lado de DS90C402M por Texas Instruments e SN65MLVD200ADR por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.

Texas Instruments
DS90C402M DS90C402M - Dual LVDS Receiver, ±100 mV | Texas Instruments

DS90C402M - Dual LVDS Receiver, ±100 mV | Texas Instruments

DS90C402M ✓ Ativo
Texas Instruments
SN65MLVD200ADR SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI

SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI

SN65MLVD200ADR ✓ Ativo

Comparação de especificações

Parâmetro DS90C402M SN65MLVD200ADR
Marca Texas Instruments Texas Instruments
Categoria Interface ICs Interface ICs
Status do ciclo de vida Ativo Ativo
Status do estoque In Stock In Stock
Preço unitário (USD) $1,10 $1,78
Device Type Dual LVDS receiver —
Receiver Configuration 2 receivers —
Input Threshold Sensitivity ±100 mV —
Common-Mode Noise Protection Supported —
Data-Rate Optimization High data rate —
Power Optimization Low power —
Interface Pairing DS90C401 companion device —
Topologia Dual high-speed point-to-point interface —
Encapsulamento 8-lead SOIC 8-pin SOIC
Package Family SOIC surface-mount package family —
Número de pinos 8 —
Tensão de alimentação de operação [DATA_NEEDED: operating supply voltage] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Input Common-Mode Range [DATA_NEEDED: input common-mode voltage range] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Corrente de alimentação [DATA_NEEDED: supply current] —
Faixa de temperatura de operação [DATA_NEEDED: operating temperature range] —
Differential Input Termination [DATA_NEEDED: input termination requirement] —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
MSL [DATA_NEEDED: moisture sensitivity level] —
Tipo de montagem Surface mount Surface Mount
Função — Half-duplex M-LVDS transceiver (1 driver + 1 receiver)
Taxa de dados — Up to 100 Mbps (typical)
Driver Skew — 700 ps (typical)
Tensão de alimentação — 3.3 V (typical)
Output Drive Current — 24 mA (typical)
ESD Protection (Bus Pins) — ±9 kV HBM
Common-Mode Range (Receiver) — -1 V to +3.4 V (M-LVDS spec)
Standards Compliance — TIA/EIA-899 (M-LVDS); TIA/EIA-644 (LVDS reference)
Temperatura de operação — -40 °C to +85 °C
Nível MSL — [DATA_NEEDED: MSL level]
Contagem de pinos — 8
Lead-Free — Yes

Fichas técnicas e recursos

Ver todos os produtos Criar BOM Solicitar cotação