EPM5192AQI100-20 vs EPM5192AQI100-15 Comparação
Comparação detalhada lado a lado de EPM5192AQI100-20 por Altera e EPM5192AQI100-15 por Intel. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Altera
EPM5192AQI100-20 - MAX 5000 192-Macrocell EPLD, 20ns, PQFP-100 | Altera
EPM5192AQI100-20 ObsoleteComparação de especificações
| Parâmetro | EPM5192AQI100-20 | EPM5192AQI100-15 |
|---|---|---|
| Marca | Altera | Intel |
| Categoria | FPGA & CPLD | FPGA & CPLD |
| Status do ciclo de vida | Obsolete | Obsolete |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $18,90 | $21,40 |
| Family | MAX 5000 EPLD | MAX 5000 |
| Device Series | EPM5192 | — |
| Technology | CMOS, UV-erasable EPROM | CMOS, EPROM-based (UV-erasable on windowed versions, OTP on this part) |
| Propagation Delay | 20 ns (speed grade -20) | — |
| Logic Array Blocks (LABs) | 12 | 12 |
| Interconnect | Programmable Interconnect Array (PIA) | — |
| Macrocell Count | 192 | — |
| Dedicated Inputs | 7 | 7 |
| I/O Pins | 64 bidirectional | — |
| Encapsulamento | 100-pin PQFP (R-PQFP-G100) | PQFP-100 (R-PQFP-G100), 100-pin Plastic Quad Flat Pack |
| JEDEC Package Outline | R-PQFP-G100 | — |
| Temperatura de operação | Industrial grade ("I" suffix) | — |
| Tipo de montagem | Surface Mount (PQFP) | — |
| Architecture | Classic EPLD, deterministic timing | — |
| Design Tool | Altera MAX+PLUS II (legacy) | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Tensão de alimentação | [DATA_NEEDED: VCC range] | [DATA_NEEDED: VCC typical value] |
| Series | — | MAX® 5000 EPLD |
| Device Type | — | OT PLD (One-Time-Programmable EPLD), CMOS |
| Macrocells | — | 192 |
| Programmable I/O Lines | — | 64 |
| Total Logical Inputs | — | 72 |
| Propagation Delay (tpd) | — | 15 ns (speed grade -15) |
| Propagation Delay (max datasheet) | — | 25 ns |
| Maximum Internal Frequency | — | 83.3 MHz |
| Operating Temperature Grade | — | Industrial (-40C to +85C) - 'I' suffix |
| Programming Method | — | JTAG via Altera programming hardware (ByteBlasterMV, USB-Blaster) |