INA105KP vs INA101HP-1 Comparação
Comparação detalhada lado a lado de INA105KP por Texas Instruments e INA101HP-1 por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
INA105KP - Unity-Gain Precision Differential Amplifier | Texas Instruments
INA105KP ✓ AtivoComparação de especificações
| Parâmetro | INA105KP | INA101HP-1 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Precision unity-gain differential amplifier (1 circuit) | Instrumentation amplifier |
| Differential Gain | 1.000 (unity, fixed) | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Maximum Input Offset Voltage | 500 uV | — |
| Common-Mode Rejection Ratio (Minimum) | 86 dB | — |
| Supply Voltage Range (Total) | 10 V to 36 V (single 5 V to 36 V, dual +/-5 V to +/-18 V) | — |
| Common-Mode Input Voltage, Minimum | -20 V | — |
| Common-Mode Input Voltage, Maximum | [DATA_NEEDED: common-mode input voltage maximum] | — |
| Common-Mode Range | Extends beyond positive and negative supply rails | — |
| Operating Ambient Temperature | -40 °C to +85 °C | — |
| Encapsulamento | 8-pin PDIP (P package), through-hole | — |
| Tipo de montagem | Through-hole / DIP | Through-hole |
| Internal Gain Network | On-chip laser-trimmed metal-film resistor network | — |
| Op-Amp Core | Precision operational amplifier | — |
| Resistor Temperature Coefficient Tracking | Matched TCR maintains gain accuracy and CMRR over temperature | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Corrente de alimentação | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Power Supply Rejection Ratio | [DATA_NEEDED: PSRR] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Amplifier Configuration | — | 1 circuit |
| Internal Operational Amplifier Count | — | 3 amplifiers |
| Gain Range | — | 1 V/V to 1000 V/V |
| Gain-Bandwidth Product at Unity Gain | — | 300 kHz |
| Input Offset Voltage | — | 25 uV maximum |
| Input Voltage Drift | — | 0.25 uV/degree C maximum |
| Low Nonlinearity | — | 0.002% |
| Input Noise | — | 13 nV/sqrt(Hz) |
| Input Impedance | — | 10 Gohm |
| Tensão de alimentação | — | 5 V to 20 V |
| Common-Mode Rejection at 60 Hz | — | [DATA_NEEDED: minimum CMRR value in dB] |
| Package Type | — | 14-pin PDIP |
| Integrated Precision Resistors | — | Laser-trimmed metal-film resistors |
| REACH Status | — | unknown |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range in degrees C] |
| Maximum Total Supply Voltage | — | [DATA_NEEDED: maximum total supply voltage in V] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range in V] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing in V] |