INA129PA vs INA128PA Comparação
Comparação detalhada lado a lado de INA129PA por Texas Instruments e INA128PA por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | INA129PA | INA128PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Maximum Input Offset Voltage | 50 uV | 50 µV |
| Maximum Input Offset Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Protected Input Voltage | -40 V to +40 V | — |
| Wide Supply Range | Plus or minus 18 V | — |
| Faixa de temperatura de operação | -40 degC to +85 degC | — |
| Encapsulamento | 8-pin plastic DIP | 8-pin PDIP |
| Tipo de montagem | Through-hole | Through-hole |
| Gain-Setting Resistor | 49.4 kilohm | — |
| Gain Equation | [DATA_NEEDED: INA129 gain equation] | — |
| Corrente de repouso | [DATA_NEEDED: quiescent current] | 700 µA |
| Gain Range | [DATA_NEEDED: gain range] | 1 to 10,000 |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Maximum Output Voltage | [DATA_NEEDED: maximum output voltage] | — |
| Corrente máxima de saída | [DATA_NEEDED: maximum output current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Input Protection | — | ±40 V |
| Supply Range | — | Up to ±18 V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Temperatura de operação | — | -40°C to +85°C |