MAX3076EESD+T vs ISL83072EIUZA Comparação
Comparação detalhada lado a lado de MAX3076EESD+T por Analog Devices e ISL83072EIUZA por Renesas Electronics. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Renesas Electronics
ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas
ISL83072EIUZA ✓ AtivoComparação de especificações
| Parâmetro | MAX3076EESD+T | ISL83072EIUZA |
|---|---|---|
| Marca | Analog Devices | Renesas Electronics |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,00 | $1,45 |
| Product Type | RS-485/RS-422 transceiver | — |
| Supply Voltage Range | 2.97 V to 3.63 V | — |
| Maximum Data Rate | 16 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| ESD Protection | ±15 kV | — |
| Fail-Safe Receiver | Yes; logic-high output when receiver inputs are open or shorted | — |
| Hot-Swap Support | Yes | — |
| Interface Standards | RS-485 and RS-422 | — |
| Encapsulamento | 14-pin narrow SOIC, 3.90 mm width | 8-MSOP |
| Tipo de montagem | Surface mount | Surface Mount |
| Temperatura de operação | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C (industrial) |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Protection | [DATA_NEEDED: driver output protection details] | — |
| Corrente de alimentação | [DATA_NEEDED: operating supply current] | — |
| Status RoHS | unknown | Compliant |
| AEC-Q100 Qualification | not_applicable | — |
| Função | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Taxa de dados | — | 500 kbps (slew-rate limited, per family) |
| Tensão de alimentação | — | 3.0 V to 3.6 V (single 3.3V supply) |
| Bus ESD Protection (HBM) | — | ±15 kV (RS-485 bus pins) |
| Other-Pin ESD (HBM) | — | >7 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Receiver Fail-Safe | — | Full fail-safe (open, short, terminated, floating) |
| Hot Plug Tolerant | — | Yes (Tx/Rx remain three-state during power-up on versions with enable pins) |