MAX485CUA+ vs MAX485CSA+ Comparação
Comparação detalhada lado a lado de MAX485CUA+ por Analog Devices e MAX485CSA+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | MAX485CUA+ | MAX485CSA+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Função | Transceiver | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Protocol | RS-422, RS-485 | — |
| Taxa de dados | 2.5 Mbps (max) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Supply Current (no load) | 300 uA (typical) | — |
| Temperatura de operação | 0 C to +70 C (C suffix) | — |
| Encapsulamento / Caixa | 8-uMAX / 8-uSOP | — |
| Tipo de montagem | Surface Mount | Surface mount |
| Receiver Hysteresis | 50 mV (typical) | — |
| ESD Protection (bus pins, HBM) | 15 kV | — |
| Number of Transceivers on Bus | 32 (1 unit load) | — |
| Duplex | Half | — |
| Status RoHS | Compliant | — |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Communication Standards | — | RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Maximum Data Rate | — | 2.5Mbps |
| Driver Slew Rate | — | Unlimited for the MAX485 family |
| Device Type | — | Low-power differential transceiver |
| Encapsulamento | — | 8-pin SOIC |
| Contagem de pinos | — | 8 pins |
| Tensão de alimentação | — | [DATA_NEEDED: supply voltage range] |
| Corrente de alimentação | — | [DATA_NEEDED: unloaded and loaded supply current] |
| Faixa de temperatura de operação | — | [DATA_NEEDED: MAX485CSA operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: driver short-circuit protection duration] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |