MAX485ESA+ vs SN75176BDR Comparação
Comparação detalhada lado a lado de MAX485ESA+ por Analog Devices e SN75176BDR por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | MAX485ESA+ | SN75176BDR |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Função | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensão de alimentação | 4.75 V to 5.25 V (5 V nominal) | 5 V |
| Taxa de dados | 2.5 Mbps | — |
| Supply Current (unloaded) | 120 µA to 500 µA | — |
| Receiver Hysteresis | 70 mV (typ) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold (V_TH) | -0.2 V min / +0.2 V max | — |
| ESD Protection (HBM, driver output) | ±15 kV (per datasheet) | — |
| Unit Load | 1/8 (up to 256 transceivers on bus) | — |
| Temperatura de operação | -40 °C to +85 °C | — |
| Encapsulamento | 8-SOIC (SOIC-8) | SOIC (D), 8 pins |
| Tipo de montagem | Surface Mount | Surface mount |
| Status RoHS | Compliant (per Maxim/ADI datasheet suffix '+') | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Faixa de temperatura de operação | — | 0 °C to 70 °C |
| Contagem de pinos | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Corrente de repouso | — | [DATA_NEEDED: quiescent current] |