NE5532P vs NE5532D Comparação
Comparação detalhada lado a lado de NE5532P por Texas Instruments e NE5532D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AtivoComparação de especificações
| Parâmetro | NE5532P | NE5532D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Amplifier Count | 2 amplifiers | — |
| Product Type | Dual low-noise operational amplifier | — |
| Maximum Supply Voltage | 30 V | — |
| Supply Voltage Range | ±5 V to ±15 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 9 V/µs typical | 10 V/μs typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| High DC Voltage Gain | 100 V/mV typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical with VCC = ±18 V and RL = 600 ohm | — |
| Input Offset Voltage | 4000 µV maximum | — |
| Process Technology | Bipolar | — |
| Encapsulamento | 8-pin PDIP (P) | 8-pin SOIC |
| Tipo de montagem | Through hole | Surface Mount |
| Temperatura de operação | 0 °C to 70 °C | — |
| Primary Application | Audio | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual low-noise operational amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| DC Voltage Gain | — | 100 V/mV typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Faixa de temperatura de operação | — | 0 °C to +70 °C for NE5532x |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Corrente de alimentação | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |