PCF8574PW vs PCF8574PWG4 Comparação
Comparação detalhada lado a lado de PCF8574PW por Texas Instruments e PCF8574PWG4 por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
PCF8574PW - 8-bit I2C I/O Expander 20-TSSOP | Texas Instruments (Tape & Reel)
PCF8574PW ✓ AtivoComparação de especificações
| Parâmetro | PCF8574PW | PCF8574PWG4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Função | I/O Expander | — |
| Number of I/O | 8 | — |
| Interface | I2C (SMBus compatible) | I2C |
| Clock Frequency (Max) | 100 kHz | — |
| I2C Address Base | 0x20 (PCF8574A: 0x38) | — |
| Supply Voltage (VCC) | 2.5 V to 6 V | — |
| Supply Current (Standby) | 2.5 uA typical | — |
| Interrupt Output | Yes (active-low INT) | Yes |
| Hardware Address Pins | 3 (A0, A1, A2) | — |
| Max Devices on Bus | 8 (16 combined with PCF8574A) | — |
| Output Drive (Source/Sink) | 25 mA / 25 mA per I/O | — |
| I/O Type | Quasi-bidirectional (no direction register) | — |
| Encapsulamento | 20-pin TSSOP (PW) | 20-pin TSSOP |
| Temperatura de operação | -40 C to +85 C | — |
| Tipo de montagem | Surface Mount | Surface mount |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Nível MSL | 1 (unlimited floor life) | — |
| Device Type | — | 8-bit remote I/O expander |
| Number of I/O Lines | — | 8 |
| Maximum I2C Clock Frequency | — | 100 kHz |
| Tipo de saída | — | Push-pull |
| Power-On Reset | — | Yes |
| Output Source Current | — | 1 mA |
| Output Sink Current | — | 25 mA |
| Shipping Package | — | Tape and reel |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Corrente de repouso | — | [DATA_NEEDED: quiescent current] |
| I2C Address | — | [DATA_NEEDED: I2C slave address configuration] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |