SP485ECN-L vs MAX485ECSA+ Comparação
Comparação detalhada lado a lado de SP485ECN-L por MaxLinear e MAX485ECSA+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ AtivoComparação de especificações
| Parâmetro | SP485ECN-L | MAX485ECSA+ |
|---|---|---|
| Marca | MaxLinear | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | RS-422/RS-485 half-duplex line transceiver | Half-duplex RS-485/RS-422 line transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Tensão de alimentação | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Taxa de dados | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | — |
| Technology | BiCMOS | CMOS |
| Encapsulamento | 8-pin SOIC | 8-SOIC (0.150 inch, MS-012A) |
| Package Width | 0.154 in (3.90 mm) | — |
| Tipo de montagem | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Corrente de alimentação | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | — |
| Transceiver Configuration | — | 1 driver, 1 receiver |
| Maximum Data Rate | — | 2.5 Mbps |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Interface Standard | — | RS-485 and RS-422 |
| Driver Output Protection | — | 15 kV ESD |
| Receiver Input Protection | — | 15 kV ESD |
| Driver Output Type | — | Slew-rate-limited |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Maximum Bus Nodes | — | [DATA_NEEDED: maximum bus nodes] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Tensão de alimentação de operação | — | [DATA_NEEDED: operating supply voltage] |