Analog Devices

AD524BDZ - Precision Instrumentation Amp | Analog Devices

N.º da peça: AD524BDZ ✗ Fim de vida
16-lead ceramic DIP Package
MOQ: 1 |

AD524BDZ Visão geral

The Analog Devices AD524BDZ is a precision monolithic instrumentation amplifier with one circuit in a 16-lead ceramic DIP package. It provides pin-programmable gains of 1, 10, 100, and 1000, together with single-resistor programming for any desired gain. The AD524 family is designed for data-acquisition systems requiring high linearity, high common-mode rejection, low offset-voltage drift, and low noise.

An instrumentation amplifier is a differential analog signal-conditioning IC that amplifies the voltage difference between two inputs while rejecting common-mode voltage. It belongs to the amplifier IC hierarchy, where instrumentation amplifiers combine input-stage symmetry, differential gain control, and high common-mode rejection for sensors and precision measurement systems. The AD524 converts low-level differential sensor signals into a more useful single-ended output while preserving signal integrity.

The AD524 platform includes four fixed, pin-programmable gain selections: 1, 10, 100, and 1000. A single external resistor can also establish a gain other than those fixed values. Input and output offset-nulling terminals support precision applications and help minimize offset-voltage changes during gain ranging. The inputs are protected against both power-on and power-off fault conditions, improving robustness in systems where sensor inputs may be exposed to abnormal voltages during startup or shutdown.

Analog Devices describes the AD524 as a precision monolithic instrumentation amplifier optimized for data acquisition. Its design emphasizes high linearity, high common-mode rejection, low offset-voltage drift, and low noise. These characteristics make gain configuration, input protection, and nulling functions central to its use with bridge sensors, strain gauges, pressure transducers, and other low-level differential sources.

The AD524 family is available in multiple package and temperature options. The manufacturer lists a 16-lead ceramic DIP, a 16-lead SBDIP, a 16-lead wide-body SOIC, and a 20-terminal leadless chip carrier. The S-grade option is specified over an extended temperature range of -55°C to +125°C. The AD524BDZ specifically uses the 16-lead ceramic DIP format and provides the complete four-gain selection plus continuous resistor-programmed gain.

A practical design should keep sensor wiring short, maintain symmetrical input routing, and place the gain-setting resistor close to its designated device pin. Input and output nulling networks should use appropriately matched resistors and short paths. Because the AD524BDZ is a through-hole ceramic-DIP device, designers should also account for package height, thermal rise, and mechanical clearance rather than treating it as a low-profile surface-mount component.

This product page organizes the AD524BDZ gain options, package details, application guidance, and substitution considerations into one engineering-focused reference. It also distinguishes the fixed-gain architecture from a purely resistor-programmable approach and identifies the configuration details that must be checked before assigning a replacement.

Alternativas drop-in para AD524BDZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD524BDZ (mesmo formato e footprint) — diferindo em Mounting Type.

Analog Devices
Mounting Type: Through-hole
Comparar com AD524BDZ →

AD624BDZ

✅ Drop-In
Analog Devices
📦 16-CDIP
Precision instrumentation amplifier · 1 circuit · 25 MHz · 5 V/µs · 15 µs · 75 µV · ±6 V to ±18 V · 1, 100, 200, 500, and 1000

Consulte o preço

Ver ficha técnica →

AD524BD

✅ Drop-In
Analog Devices
📦 16-CDIP
Precision monolithic instrumentation amplifier · 1 circuit · ±6 V to ±18 V · 100 µV · 5 V/µs · 1 MHz · External resistor gain · Built-in compensation

Consulte o preço

Ver ficha técnica →

AD524BDZ Classificações máximas e características elétricas

Number of Circuits 1 circuit
Device Type Precision monolithic instrumentation amplifier
Encapsulamento 16-lead ceramic DIP
Pin-Programmable Gains 1, 10, 100, and 1000
Resistor-Programmable Gain Any gain using one external resistor
Input Offset Nulling Input nulling terminals provided
Output Offset Nulling Output nulling terminals provided
Input Fault Protection Protected during power-on and power-off conditions
S-Grade Temperature Range -55°C to +125°C
Tipo de montagem Through-hole ceramic DIP
Status RoHS unknown
REACH Status unknown

Guia de Configuração de Pinos do AD524BDZ 16-lead ceramic dip

Configuração de pinos para AD524BDZ (pacote 16-lead ceramic dip). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-lead ceramic dip para AD524BDZ

Nenhum dado detalhado de pinagem disponível para AD524BDZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD524BDZ é adequado para 6 aplicaçãos: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Precision Data Acquisition, Low-Level Sensor Signal Conditioning, Instrumentation and Test Systems, Medical Monitoring Signal Front End.

🏭

Strain-Gauge Bridge Measurement

The AD524BDZ fits strain-gauge bridge front ends that produce small differential signals while rejecting a much larger common-mode voltage. Its four pin-programmable gains of 1, 10, 100, and 1000 let the engineer select a range that preserves useful signal headroom without excessive amplification of noise. The single-resistor option adds flexibility when a bridge output does not match the fixed ratios. Keep the bridge wiring symmetrical, route the two inputs as a matched pair, and confirm the input common-mode limits against the excitation voltage and bridge configuration.

🏭

Pressure Transducer Interface

The AD524BDZ can condition the millivolt-level differential output of a bridge-based pressure transducer while rejecting supply-related common-mode variation. The available gains cover a broad range of sensor sensitivities, and the external-resistor option permits application-specific adjustment beyond 1, 10, 100, and 1000. Input and output nulling terminals support precision calibration when required. The design must account for excitation drift, sensor lead resistance, grounding, and the input common-mode range rather than treating amplification as the only requirement.

🖥️

Precision Data Acquisition

For multi-channel laboratory or industrial data-acquisition systems, the AD524BDZ provides a combination of selectable gain, high common-mode rejection, and low offset-voltage drift. Fixed gains of 1, 10, 100, and 1000 simplify calibration across several sensor ranges, while resistor-programmed gain supports specialized transducers. A practical implementation should use shielded differential wiring, a clean reference strategy, symmetrical grounding, and an ADC interface designed for the instrumentation amplifier's output range. Input filtering should be placed where it does not unbalance the source impedance.

🧩

Low-Level Sensor Signal Conditioning

The AD524BDZ is appropriate for conditioning weak differential outputs from resistive sensors where common-mode noise and offset drift determine the usable measurement resolution. Its monolithic instrumentation-amplifier architecture supports gain selection without requiring a discrete op-amp network, and the nulling terminals permit precision adjustment when needed. Choose the gain to avoid saturating the ADC while retaining sufficient signal amplitude. Verify supply headroom, input bias current, source impedance, and common-mode range for each sensor before finalizing the front end.

🔧

Instrumentation and Test Systems

The AD524BDZ can serve as the analog front end in bench instruments that measure small differential voltages referenced to a larger common-mode potential. The fixed gain positions simplify instrument configuration, and any-gain resistor programming allows adaptation to custom test articles. The 16-lead ceramic DIP is suitable for robust through-hole laboratory and industrial assemblies where mechanical serviceability matters. Ensure that the selected gain, reference voltage, output range, and supply arrangement remain valid over the full test-signal range and environmental conditions.

💊

Medical Monitoring Signal Front End

The AD524BDZ can be considered for low-level medical monitoring circuitry when its noise, offset, common-mode, temperature, and protection characteristics satisfy the complete system requirements. The 1, 10, 100, and 1000 gain selections help maintain usable signal amplitude for differential sensors, while nulling terminals support precision calibration. A medical design must additionally establish patient protection, isolation, creepage, leakage, EMC, and applicable quality requirements; those system protections cannot be inferred from the amplifier package or gain settings.

Resumo dos produtos recomendados

AD624BDZ Analog Devices Usado em: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Precision Data Acquisition, Low-Level Sensor Signal Conditioning, Instrumentation and Test Systems, Medical Monitoring Signal Front End AD524BD Related AD524-family ordering designation Usado em: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Precision Data Acquisition, Low-Level Sensor Signal Conditioning, Instrumentation and Test Systems, Medical Monitoring Signal Front End
What is the AD524BDZ?
The AD524BDZ is a precision, single-circuit instrumentation amplifier from Analog Devices packaged in a 16-lead ceramic DIP. According to the Analog Devices AD524 datasheet, it provides pin-programmable gains of 1, 10, 100, and 1000, as well as single-resistor programming for any gain. It is intended for data-acquisition systems that require high linearity, high common-mode rejection, low offset-voltage drift, and low noise.
What gains can the AD524BDZ provide?
The AD524BDZ provides four fixed gains selected at the device pins: 1, 10, 100, and 1000. The Analog Devices AD524 datasheet also describes single-resistor programming, allowing an external resistor to establish any required gain value. This combination gives the designer more flexibility than a fixed-gain amplifier while retaining convenient selectable ratios for common sensor and bridge-amplifier designs.
Where can I download the AD524BDZ datasheet PDF?
The official AD524BDZ documentation is the Analog Devices AD524 datasheet, available from the manufacturer's product page or direct PDF link. The datasheet contains the AD524 family specifications, gain-selection information, package options, pin descriptions, and application guidance. Use the Analog Devices document for the AD524BDZ ordering information and the 16-lead ceramic-DIP footprint rather than relying on a generic third-party transcription.
Where can I find the AD524BDZ pinout?
The AD524BDZ pinout is shown in the pin-configuration section of the official Analog Devices AD524 datasheet. The part is a 16-lead ceramic DIP, so the drawing includes all 16 terminal numbers together with the gain-programming, input, output, nulling, reference, and supply connections. Assign PCB connections directly from that table because the AD524 family also includes devices in 16-lead SBDIP, 16-lead wide-body SOIC, and 20-terminal LCC packages.
What is the difference between AD524BD and AD524BDZ?
AD524BDZ is the complete Analog Devices orderable designation for the 16-lead ceramic-DIP version of the AD524 precision instrumentation amplifier. The AD524BD comparison identifies AD524BD as a related designation, but the available comparison does not establish that every electrical grade, package attribute, or lifecycle condition is identical. Confirm the package suffix and complete ordering code against the Analog Devices product page before treating either designation as a substitute.
Is the AD524BDZ suitable for strain-gauge and bridge measurements?
Yes, the AD524BDZ is suitable for low-level differential measurements such as strain gauges and bridge transducers when its gain and input-protection characteristics meet the system requirements. The Analog Devices AD524 family is designed for high common-mode rejection and low offset-voltage drift, while the 1, 10, 100, and 1000 gain selections cover common bridge-measurement ranges. The 16-lead ceramic DIP also offers through-hole construction for applications that favor robust, serviceable assemblies.
What is the best drop-in replacement for the AD524BDZ?
No confirmed drop-in replacement for the AD524BDZ is established by the available cross-reference results. A valid replacement must preserve the 16-lead ceramic-DIP footprint, pin functions, gain-programming behavior, supply limits, input range, and offset specifications. AD624BDZ is a closely related instrumentation-amplifier candidate with the same 16-lead DIP format, but it is not automatically interchangeable; verify every pin function and electrical limit against the manufacturer datasheets before substitution.
What can replace the AD524BDZ?
The closest documented candidate is the AD624BDZ, which uses the same 16-lead ceramic-DIP package and is described as a high-precision, low-noise instrumentation amplifier for low-level transducers. It should be treated as a design-review candidate rather than a guaranteed drop-in replacement. Check gain-setting behavior, reference implementation, input and output terminals, supply voltage, common-mode range, offset drift, noise, and nulling functions before approving it for an AD524BDZ position.
Is the AD524BDZ the same as the AD624BDZ?
No, the AD524BDZ and AD624BDZ are different Analog Devices instrumentation-amplifier models even though both can be offered in a 16-lead ceramic DIP. The AD524 is the older precision monolithic family with selectable gains of 1, 10, 100, and 1000 plus resistor-programmed gain. The AD624BDZ is a newer high-precision, low-noise family, so engineers must compare the complete pin functions and electrical specifications rather than relying on package identity alone.
When should I choose the AD524BDZ over the AD624BDZ?
Choose the AD524BDZ when a design specifically requires the AD524's documented combination of 1, 10, 100, and 1000 pin-programmable gains together with single-resistor programming for any gain. The AD624BDZ may be attractive when its newer low-noise instrumentation-amplifier characteristics are preferable. Because the available comparison does not establish complete electrical equivalence, use the AD624BDZ only after checking its gain and pin configuration against the required circuit.
Is the AD524BDZ suitable for industrial data acquisition?
The AD524BDZ can suit industrial data-acquisition circuitry when its electrical limits and environmental grade are appropriate for the installation. Its high common-mode rejection, low offset-voltage drift, low-noise design, and multiple gain choices are valuable for precision transducer measurement. The through-hole 16-lead ceramic DIP is mechanically robust, but engineers must verify supply voltage, common-mode range, temperature grade, isolation strategy, and grounding before integrating it with industrial sensors.
How does the AD524BDZ handle input power faults?
The Analog Devices AD524 family includes input protection for both power-on and power-off fault conditions. That feature helps control the behavior of the input stage when a sensor or external network can momentarily drive an input outside its normal operating condition during startup or shutdown. Protection does not remove the need for correct input-biasing, grounding, and supply sequencing, so the complete application circuit should still be checked against the datasheet's absolute maximum ratings.
Does the AD524BDZ need offset-voltage nulling?
The AD524BDZ provides input and output offset-nulling terminals, but they are not automatically required in every circuit. Analog Devices identifies them for high-precision applications and for minimizing offset-voltage changes during gain ranging. Use them when the measured error budget requires external offset adjustment; otherwise, include the recommended balance network in the schematic and layout while avoiding long, high-impedance nulling traces that could increase noise pickup.
Where can I buy the AD524BDZ online?
Use the Request a Quote form on this page to request the AD524BDZ, current availability, unit pricing, and lead time. The AD524BDZ is a legacy 16-lead ceramic-DIP instrumentation amplifier, so lifecycle status and procurement conditions should be confirmed for each order. The manufacturer identifies the AD524 family in ceramic-DIP, SBDIP, wide-body SOIC, and leadless-chip-carrier packages, which can matter when planning a replacement rather than an exact order.
What is the price and lead time of the AD524BDZ?
Submit the AD524BDZ part number through the Request a Quote form on this page to obtain current unit pricing, stock status, minimum order quantity, and lead time. Legacy ceramic-DIP inventory can vary by package suffix and region, so a quotation should identify the complete AD524BDZ ordering code and requested quantity. Do not base a production schedule on historical catalog pricing because obsolete or legacy parts may have limited and changing availability.
What are the key specifications of the AD524BDZ that engineers should know?
The essential AD524BDZ facts are one precision instrumentation-amplifier circuit, a 16-lead ceramic-DIP package, four pin-programmable gains of 1, 10, 100, and 1000, and single-resistor programming for any gain. Analog Devices also documents input and output offset-nulling terminals and power-on and power-off input protection. The family emphasizes low noise, high linearity, high common-mode rejection, and low offset-voltage drift for precision data acquisition.

Dados de referência de engenharia para AD524BDZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD524BDZ when the circuit specifically benefits from the AD524 family's combination of fixed gains of 1, 10, 100, and 1000 and single-resistor programming for any gain. It is also appropriate when input and output nulling terminals or documented power-state input protection are important to the measurement design. The 16-lead ceramic DIP provides a robust through-hole construction for serviceable industrial and laboratory assemblies. Evaluate AD624BDZ when a newer low-noise instrumentation-amplifier family may improve the design, but treat it as a redesign-review candidate rather than an automatic substitution. Verify gain programming, pin functions, reference behavior, electrical limits, and environmental grade. AD524BD is a related ordering designation, yet its exact suffix and lifecycle attributes must be confirmed before use. For any alternate device, begin with footprint and pin-function checks, then compare noise, offset drift, common-mode rejection, gain accuracy, and supply requirements against the complete system error budget.

Comparação com alternativas

Parâmetro Este produto AD624BDZ AD524BD
Package 16-CDIP 16-CDIP - same package 16-CDIP - same package
Brand Analog Devices Analog Devices Analog Devices

Principais diferenciais

  • Flexible gain architecture (vs AD624BDZ)
  • Input and output nulling capability (vs AD524BD)
  • Power-state input protection (vs AD624BDZ)

Notas de projeto

Route the two input conductors as a closely matched pair and keep them away from clocks, switching-converter inductors, relay contacts, and high-current return paths. The differential input stage benefits from symmetry, so avoid long branches or unequal copper geometry between the two channels. Place input filtering close to the device only after confirming that capacitor or resistor networks do not create unequal source impedances. A single ground reference point for the sensor, amplifier, and following converter minimizes common-mode conversion into the measured signal.

Do not assume that identical 16-lead ceramic-DIP packages guarantee pin-compatible replacements. For the AD524BDZ, verify the gain-control pins, input terminals, output terminals, reference connection, nulling terminals, supply pins, and exposed functional differences before substituting AD624BDZ or any other candidate. Also check maximum input voltage, input common-mode range, output swing, supply range, offset drift, noise, and temperature grade. PCB compatibility and electrical compatibility must both pass before a replacement is approved.

Choose the gain and supply arrangement so that sensor excitation, input common-mode voltage, and output swing remain inside the device limits at every operating condition. If nulling is used, keep its network close to the relevant terminals and use stable, low-noise resistors. The gain-setting resistor should likewise be placed close to its designated pin. Verify the reference arrangement and output connection against the manufacturer's pin-configuration table before powering the board, because incorrect supply or reference wiring can exceed the allowable input conditions even though the device includes power fault protection.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code. AEC-Q100 is not applicable to this precision instrumentation amplifier.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD524BDZ datasheet AD524BDZ datasheet pdf AD524BDZ pinout AD524BDZ 16-CDIP package AD524BDZ gain configuration AD524BDZ equivalent AD524BDZ replacement AD524BDZ vs AD624BDZ AD524BDZ price AD524BDZ stock Analog Devices AD524BDZ AD524BDZ strain gauge amplifier

Componentes & termos relacionados

Analog Devices AD524BDZ AD524BD AD624BDZ instrumentation amplifier precision amplifier amplifier IC analog signal-conditioning IC differential amplifier common-mode rejection ratio CMRR offset-voltage drift input noise gain error resistor-programmable gain 16-CDIP ceramic DIP through-hole package strain-gauge bridge pressure transducer data acquisition RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ