Analog Devices

AD8016ARB - 1.5W Dual xDSL Line Driver | Analog Devices

N.º da peça: AD8016ARB ✓ Ativo
±12 V Vdss ADSL, HDSL2, and proprietary xDSL systems Rds(on) 24-lead SOIC Package
MOQ: 1 |

AD8016ARB Visão geral

Analog Devices AD8016ARB is a dual, high-output-current operational amplifier designed as a second-generation DSL line driver for ADSL, HDSL2, and proprietary xDSL systems. The device is specified for full-rate ADSL operation with 1.5 W total power dissipation, flexible Standby functionality, and operation from a ±12 V supply. The ARB package variant is supplied in a 24-lead SOIC package.

A DSL line driver is a high-current amplifier stage used at the transmitter end of a digital subscriber line. It must combine large output-current capability with the voltage, slew-rate, distortion, and power characteristics needed to transmit a broadband signal through a heavily attenuated and noise-affected copper pair. Within the signal-chain hierarchy, the AD8016 is both an operational amplifier and a communications line-driver IC.

Principal features include a dual amplifier configuration, high output current, and total power dissipation of 1.5 W. The manufacturer describes the AD8016 as a second-generation DSL line driver suitable for equipment at both ends of the line. Its flexible Standby function provides a dedicated method for controlling operating state, while the 24-lead SOIC option offers a conventional surface-mount package for industrial and telecommunications PCB assembly.

The AD8016ARB operates from a ±12 V high-voltage supply and is intended for bipolar signal-chain implementations rather than low-voltage rail-to-rail systems. Its architecture uses a high-voltage output-current amplifier to drive a transformer-coupled DSL line. The 1.5 W total dissipation figure is important for thermal design because sustained full-rate line transmission can increase device temperature significantly in a compact, surface-mount package.

Typical uses include ADSL central-office line interfaces, remote terminal equipment line drivers, HDSL2 transceivers, proprietary xDSL equipment, and other bidirectional copper-pair communications systems. In each case, the amplifier sits between the modulation circuitry and the line transformer, providing the current and voltage swing required to launch the signal onto the pair.

Designers should preserve the manufacturer’s recommended supply decoupling, output network, and transformer-interface circuitry. Thermal performance depends on copper area, airflow, and adjacent heat sources, so a 1.5 W device may require careful plane and via placement in a sealed interface card. Signal-integrity evaluation should also include output isolation, transformer loading, and return-path control.

This page combines the AD8016ARB technical identity, verified sourcing information, same-footprint alternatives, and practical design guidance to support component selection and replacement planning for xDSL line-interface designs.

Alternativas drop-in para AD8016ARB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD8016ARB (mesmo formato e footprint) — diferindo em Package.

Analog Devices
Package: 8-pin SOIC
Comparar com AD8016ARB →

AD8016ARBZ

✅ Drop-In
📦 24-lead SOIC
Same 24-lead SOIC footprint and consistent performance; ordering/packaging treatment differs by 0% in rated electrical parameters

📋 Alternativa de referência (fora do catálogo)

AD815ARBZ-24

✅ Drop-In
📦 24-lead SOIC
Same 24-pin SOIC ADSL-driver format; detailed output-current and dynamic-performance differences are unverified

📋 Alternativa de referência (fora do catálogo)

AD8016ARB Classificações máximas e características elétricas

Amplifier Type Dual high-output-current operational amplifier
Primary Function xDSL line driver
Supported DSL Standards ADSL, HDSL2, and proprietary xDSL systems
Generation 2nd-generation DSL line driver
Total Power Dissipation 1.5 W
Tensão de alimentação ±12 V
Maximum Offset Voltage 3000 uV
Amplifier Process Bipolar
Standby Function Flexible Standby functionality
Encapsulamento 24-lead SOIC
Tipo de montagem Surface mount
Status RoHS Compliant
REACH Status Compliant
AEC-Q100 Qualification Not applicable

Guia de Configuração de Pinos do AD8016ARB 24-lead soic

Configuração de pinos para AD8016ARB (pacote 24-lead soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 24-lead soic para AD8016ARB

Nenhum dado detalhado de pinagem disponível para AD8016ARB.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD8016ARB é adequado para 6 aplicaçãos: ADSL Central-Office Line Interface, HDSL2 Copper-Line Transceiver, Remote Terminal Equipment Line Driver, Proprietary xDSL Interface Equipment, ADSL Line-Card Power and Signal Conditioning, High-Speed Copper-Pair Signal Interface.

🌐

ADSL Central-Office Line Interface

The AD8016ARB fits a central-office ADSL transmitter because Analog Devices specifies it for full-rate ADSL operation with 1.5 W total power dissipation and a ±12 V supply. Its dual high-output-current amplifier channels can provide line-driving gain ahead of the isolation and line-transformer network. The important engineering check is not package compatibility but whether each amplifier meets the required output swing, current, slew rate, and distortion at the selected line rate. Flexible Standby can reduce consumption during inactive operating states, while thermal planning must account for continuous transmission in a densely populated access-card enclosure.

🌐

HDSL2 Copper-Line Transceiver

The AD8016ARB is appropriate for the transmit side of an HDSL2 interface because it is designed as a high-output-current DSL line driver for ADSL, HDSL2, and proprietary xDSL systems. The ±12 V supply supports a bipolar line-driving architecture, and the 1.5 W power-dissipation rating provides a defined starting point for thermal analysis. Designers should verify gain-bandwidth, slew-rate, maximum output-current, and output-voltage requirements against the HDSL2 line rate and transformer turns ratio before release. Standby control should be coordinated with system power sequencing to avoid line transients.

📡

Remote Terminal Equipment Line Driver

The AD8016ARB can serve the line-drive stage in remote terminal equipment where the transmitter must launch a high-current signal into an ADSL or proprietary xDSL copper pair. Its dual-channel organization allows the circuit architecture to use the amplifiers efficiently in transmit and monitoring paths when the system topology permits. The device is optimized for bipolar ±12 V operation rather than low-voltage rail-to-rail signaling, so existing power rails and protection networks must be designed around that requirement. Check thermal rise at the operating line rate and confirm that the output network isolates the amplifier from transformer nonlinearity and cable reflections.

🔧

Proprietary xDSL Interface Equipment

The AD8016ARB is suitable for proprietary xDSL interfaces when the circuit needs a bipolar, high-output-current amplifier rather than a conventional low-power signal amplifier. Analog Devices positions the AD8016 for DSL line driving at both ends of the line, which supports symmetrical line-interface designs. Before selection, confirm that the required line coding bandwidth remains within the amplifier’s slew-rate and gain-bandwidth limits, especially at the maximum specified channel rate. The ±12 V rails, transformer interface, Standby state, and 1.5 W thermal target must be included in the first prototype review.

🖥️

ADSL Line-Card Power and Signal Conditioning

The AD8016ARB can be integrated into an ADSL line card as the high-current driver immediately preceding the line transformer. Placing the driver close to the transformer helps control feedback from the reactive line and cable network, although the complete return path still requires careful PCB planning. Its 1.5 W dissipation makes copper spreading, thermal-via placement, and enclosure airflow important parts of the card-level design. Standby control can help the card manage operating states, but system logic must ensure deactivation cannot create unwanted clicks or transient signals on an active subscriber line.

⚡

High-Speed Copper-Pair Signal Interface

The AD8016ARB is appropriate for specialized high-speed copper-pair interfaces that use a bipolar high-current output stage and transformer coupling. The amplifier must deliver the required line amplitude while maintaining acceptable distortion at the intended DSL channel rate; therefore, operating frequency, slew rate, output impedance, and transformer loading require direct comparison with the design specification. The flexible Standby function provides an efficient shutdown path for intermittently active links. Thermal qualification should use the maximum sustained line activity expected in service, including the device’s specified 1.5 W dissipation condition and the ambient temperature inside the enclosure.

Resumo dos produtos recomendados

AD8016ARBZ Same-family 24-lead SOIC line-driver alternative Usado em: ADSL Central-Office Line Interface, HDSL2 Copper-Line Transceiver, Remote Terminal Equipment Line Driver, Proprietary xDSL Interface Equipment, ADSL Line-Card Power and Signal Conditioning, High-Speed Copper-Pair Signal Interface AD815ARBZ-24 24-pin SOIC ADSL-driver alternative Usado em: ADSL Central-Office Line Interface, Remote Terminal Equipment Line Driver, High-Speed Copper-Pair Signal Interface
What is the AD8016ARB used for?
The AD8016ARB is a dual high-output-current amplifier used to drive ADSL, HDSL2, and proprietary xDSL copper lines. According to the Analog Devices product page, it is a second-generation DSL line driver intended for equipment at both ends of the line. The device combines two high-current amplifier channels, flexible Standby functionality, a ±12 V supply, and 1.5 W total power dissipation in a 24-lead SOIC package.
What are the key specifications of AD8016ARB that engineers should know?
The AD8016ARB is a dual bipolar high-output-current xDSL line driver in a 24-lead SOIC package. Its headline specifications are 1.5 W total power dissipation, operation from a ±12 V supply, and a maximum offset voltage of 3000 uV. The Analog Devices product page also identifies flexible Standby functionality and support for full-rate ADSL, HDSL2, and proprietary xDSL systems.
What is the AD8016ARB package and pin count?
The AD8016ARB uses a 24-lead SOIC package with surface-mount construction. Analog Devices lists the AD8016 family in 20-lead PSOP, 24-lead SOIC, and 28-lead TSSOP options, but ARB denotes the 24-lead SOIC configuration. The public product material does not expose a complete pin-description table, so use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
Where can I download the AD8016ARB datasheet PDF?
The official AD8016ARB datasheet is accessed through the Analog Devices AD8016 product page at analog.com/en/products/ad8016.html. That page provides the manufacturer’s technical documentation and package information for the AD8016 family. Use the AD8016ARB ordering information to confirm that the 24-lead SOIC variant matches the intended line-driver design before releasing the PCB or production BOM.
Where can I find the AD8016ARB pinout?
The AD8016ARB pinout should be taken from the pin-description table in the Analog Devices AD8016 manufacturer datasheet. The verified product page identifies the ARB ordering code as a 24-lead SOIC device, while a complete numbered pin map is not reproduced on that page. Follow the package drawing and pin table together so power, ground, feedback, Standby, and output assignments remain aligned with the exact ordering code.
Is AD8016ARB suitable for ADSL line-driver applications?
Yes, the AD8016ARB is specifically suitable for ADSL line-driver applications. According to the Analog Devices product page, the AD8016 is a second-generation DSL line driver capable of delivering full-rate ADSL from the central office while operating with 1.5 W total power dissipation. Its dual high-current channels, flexible Standby function, and ±12 V operation support both ends of a DSL line.
What is the difference between AD8016ARB and AD8016ARBZ?
The AD8016ARB and AD8016ARBZ use the same 24-lead SOIC footprint and retain consistent terminal assignments and principal performance characteristics. Their difference is ordering or packaging treatment rather than a change to the core DSL-driver function. The cross-reference material explicitly identifies AD8016ARBZ as directly replaceable without PCB modification, making it the closest documented same-package alternative.
Is AD8016ARB the same as AD815ARBZ-24?
The AD815ARBZ-24 is also described as a dual 24-pin SOIC ADSL driver, making it the closest cross-family alternative shown for the AD8016ARB. It is not the same device or the same family: detailed slew rate, bandwidth, output-current, and Standby behavior must be checked against the manufacturer datasheets before substituting it. Treat it as a prototype-level drop-in candidate until the application is fully revalidated.
When should I choose AD8016ARB over another 24-pin SOIC xDSL driver?
Choose the AD8016ARB when the design specifically requires the Analog Devices second-generation xDSL line-driver function, 1.5 W total dissipation, flexible Standby behavior, and a ±12 V supply. It is preferable to a merely similar amplifier when the original circuit was designed around the AD8016’s output-current capability and DSL interface characteristics. For a new design, compare both parts’ slew rate, bandwidth, output current, noise, distortion, and shutdown requirements rather than relying on package identity alone.
What is the best drop-in replacement for AD8016ARB?
The best documented same-footprint replacement is AD8016ARBZ because the cross-reference identifies consistent performance, terminals, and package. Both use a 24-lead SOIC configuration, allowing replacement without changing the PCB land pattern. No cross-brand candidate in the available sourcing results provides enough verified electrical detail to qualify as a production drop-in, so validate the Analog Devices option against the original datasheet before procurement.
What can replace AD8016ARB in an existing xDSL design?
AD8016ARBZ can replace AD8016ARB without changing the 24-lead SOIC footprint, while AD815ARBZ-24 may serve as a 24-pin SOIC ADSL-driver alternative after detailed circuit validation. The replacement must preserve the ±12 V supply arrangement, output-current demand, stability with the selected transformer, Standby polarity, and required distortion performance. A footprint match alone does not guarantee equivalent transient or thermal behavior.
How much power does the AD8016ARB dissipate in an xDSL line driver?
The Analog Devices product page specifies 1.5 W total power dissipation for the AD8016 line-driver application. This value should be treated as a thermal-design target for the described full-rate ADSL operating condition, not as a guarantee for every rail, load, and ambient combination. Estimate junction temperature using the exact dissipation condition, package thermal data, copper area, airflow, and the maximum ambient temperature of the finished equipment.
How should thermal design be handled for the AD8016ARB?
Treat the AD8016ARB as a significant heat source because its specified total power dissipation reaches 1.5 W in the full-rate ADSL application. Use the exposed copper available in the 24-lead SOIC footprint, minimize thermal-path bottlenecks, and place the device away from temperature-sensitive analog sections. Final thermal validation should use the actual transformer load, supply conditions, board construction, enclosure temperature, and airflow rather than board temperature alone.
Where can I buy AD8016ARB and check its current price?
Use the “Request a Quote” form on this page to request the current AD8016ARB price, stock position, lead time, and minimum order quantity. The component is listed for order by authorized channels, but live inventory and commercial terms can change without notice. The form provides a direct quotation path without relying on static online prices or third-party marketplace listings.
Is AD8016ARB in stock and what is its lead time?
The AD8016ARB is listed by the manufacturer and appears in active distributor catalogs, but a guaranteed stock quantity and production lead time are not fixed by the manufacturer product page. Request current availability, lead time, and MOQ through the “Request a Quote” form on this page. Include the required package variant, quantity, and target date so the quotation reflects the exact AD8016ARB ordering code.
Does AD8016ARB meet RoHS and REACH requirements?
The AD8016ARB comparison information identifies the part as RoHS compliant and REACH compliant. These declarations apply to the listed AD8016ARB device rather than to every related xDSL amplifier. As a communications IC rather than an automotive product, AEC-Q100 qualification is recorded as not applicable. Confirm the latest material declaration with the manufacturer when procurement or environmental reporting requires certificate-level documentation.

Dados de referência de engenharia para AD8016ARB — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD8016ARB when the product is an ADSL, HDSL2, or proprietary xDSL interface using a bipolar ±12 V line-driver architecture and when the board layout was created around the Analog Devices AD8016 family. It is particularly suitable where flexible Standby control and a specified 1.5 W full-rate ADSL dissipation condition are useful design references. AD8016ARBZ is the preferred replacement for an existing AD8016ARB footprint because its documented terminals and package remain consistent. Consider AD815ARBZ-24 only as a same-package ADSL-driver alternative after checking slew rate, bandwidth, output current, distortion, supply behavior, and Standby implementation in the manufacturer datasheets. No cross-brand alternative is qualified by the available documentation, so a redesign or manufacturer-approved substitution should be considered rather than assuming that any 24-pin SOIC amplifier is electrically equivalent.

Comparação com alternativas

Parâmetro Este produto AD8016ARBZ AD815ARBZ-24
Brand Analog Devices Analog Devices Analog Devices
Package 24-lead SOIC 24-lead SOIC 24-pin SOIC
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual ADSL driver
Primary Application xDSL line driver xDSL line driver ADSL driver
Supported DSL Systems ADSL, HDSL2, and proprietary xDSL systems ADSL, HDSL2, and proprietary xDSL systems ADSL systems

Principais diferenciais

  • Purpose-built second-generation DSL line-driver positioning (vs AD815ARBZ-24)
  • Flexible Standby functionality (vs AD815ARBZ-24)
  • Closest same-package replacement (vs AD8016ARBZ)

Notas de projeto

Use the specified 1.5 W total power dissipation as the primary thermal-check condition for full-rate ADSL operation. Keep the SOIC thermal path connected to a continuous copper area, add thermal vias where the board construction permits, and minimize copper bottlenecks around the device. Validate the finished assembly at the maximum expected ambient temperature and sustained line activity; a room-temperature solder-joint measurement does not represent worst-case enclosure conditions.

Place the AD8016ARB close to the line-transformer interface so the high-current output path remains compact. Follow the manufacturer’s recommended power and decoupling arrangement, keep the high-current return path short, and separate sensitive receive or timing circuitry from the switching and line-driver section. Confirm the 24-lead SOIC pad geometry against the PCB library and verify every pin assignment from the manufacturer pin-description table.

Evaluate the complete output path rather than only the amplifier response. The transformer turns ratio, line impedance, termination network, cable reflections, and output isolation determine the launched signal and the stability margin of the AD8016ARB. Test output amplitude, slew-limited distortion, ringing, and recovery after Standby transitions at the maximum intended DSL channel rate. Use the measured line network, not only an ideal termination, when making the final stability decision.

Informações de conformidade

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS and REACH compliance are identified in the AD8016ARB comparison information. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status are not independently established by the manufacturer material cited on this page.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD8016ARB datasheet AD8016ARB datasheet pdf AD8016ARB pinout AD8016ARB equivalent AD8016ARB replacement AD8016ARB cross reference AD8016ARB vs AD815ARBZ-24 AD8016ARB price AD8016ARB stock AD8016ARB 24 pin SOIC AD8016ARB xDSL line driver Analog Devices AD8016ARB

Componentes & termos relacionados

Analog Devices AD8016ARB AD8016ARBZ AD815ARBZ-24 xDSL line driver DSL driver IC operational amplifier high-output-current amplifier ADSL HDSL2 proprietary xDSL bipolar amplifier ±12 V power supply 1.5 W power dissipation flexible Standby 24-lead SOIC SOIC package family surface-mount package line transformer central office remote terminal equipment copper-pair interface slew rate output current thermal management
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ