Analog Devices

ADF4154BRUZ - 4 GHz Fractional-N PLL Synthesizer | Analog Devices

N.º da peça: ADF4154BRUZ ✓ Ativo
2.7 V to 5.5 V Vdss 20 mA Id 16-lead TSSOP Package
MOQ: 1 |

ADF4154BRUZ Visão geral

Analog Devices ADF4154BRUZ is a fractional-N frequency synthesizer with an RF bandwidth of 4 GHz, a 2.7 V to 5.5 V supply-voltage range, and a 16-lead TSSOP package measuring 4.40 mm in width. It is designed for programmable local-oscillator generation in wireless receiver and transmitter signal chains.

A fractional-N frequency synthesizer is a phase-locked-loop, or PLL, based clock-generation device that combines integer-N frequency synthesis with programmable fractional division. The ADF4154 family provides programmable dual-modulus prescaling, programmable charge-pump current, and a sigma-delta fractional interpolator. These functions allow a system to generate an adjustable output frequency while retaining the frequency-resolution benefits associated with fractional-N operation.

The ADF4154BRUZ operates from a 2.7 V to 5.5 V supply and has a listed supply current of 20 mA. Its maximum RF bandwidth is 4 GHz. A programmable dual-modulus prescaler supports prescaler ratios of 4/5 and 8/9, while programmable charge-pump currents provide flexibility when matching loop characteristics to a reference source, divider chain, and phase detector.

The device includes a low-noise digital phase-frequency detector, a precision charge pump, and a programmable reference divider. Its sigma-delta fractional interpolator enables programmable fractional-N division. A separate VP connection permits an extended tuning-voltage range, which can be useful when the required synthesizer tuning range exceeds the range available from the internal supply arrangement.

ADF4154BRUZ is suited to wireless transmitters and receivers, frequency conversion stages, local-oscillator generation, test equipment, and other RF systems requiring programmable fractional-N frequency synthesis. The 16-lead TSSOP package supports compact surface-mount designs, while the three-wire serial interface allows the synthesizer to be configured by an embedded controller.

For a new layout, place the reference and feedback paths to minimize sensitive traces and keep loop components close to their associated pins. Review the reference-divider limits, prescaler range, charge-pump current, loop-filter values, and required tuning range in the Analog Devices datasheet before fixing the component values. These checks are essential because a synthesizer can satisfy its headline frequency limit while still failing to lock or achieve acceptable phase noise in a specific reference architecture.

This product page combines the manufacturer specifications, package details, sourcing information, application guidance, and design considerations for the ADF4154BRUZ. It also identifies the engineering questions that should be answered before using this fractional-N PLL in a receiver, transmitter, laboratory instrument, or industrial RF control system.

Alternativas drop-in para ADF4154BRUZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADF4154BRUZ (mesmo formato e footprint) — diferindo em Package, Product Type, Charge Pump, RoHS Status, Device Type.

Analog Devices
Package: 16-pin TSSOP
Product Type: Single integer-N RF PLL frequency synthesizer
Charge Pump: Precision charge pump
Comparar com ADF4154BRUZ →
Analog Devices
Package: 16-lead TSSOP, 0.173 inch (4.40 mm) width
Product Type: Fractional-N frequency synthesizer
RoHS Status: unknown
Comparar com ADF4154BRUZ →
Analog Devices
Package: 16-pin TSSOP, 4.40 mm width
Product Type: Fractional-N RF frequency synthesizer
Charge Pump: Precision charge pump
Comparar com ADF4154BRUZ →
Analog Devices
Package: 16-lead TSSOP (0.173", 4.40 mm width)
Charge Pump: Precision, programmable
RoHS Status: unknown
Comparar com ADF4154BRUZ →

ADF4153ABRUZ

✅ Drop-In
Analog Devices
📦 16-lead TSSOP
Fractional-N frequency synthesizer · 4 GHz · 10 MHz to 4 GHz · Fractional-N phase-locked loop

Consulte o preço

Ver ficha técnica →

ADF4156BRUZ

✅ Drop-In
Analog Devices
📦 16-lead TSSOP
Fractional-N frequency synthesizer (PLL), single circuit · 6.2 GHz · 500 MHz · 400 V/us minimum · Sigma-Delta · Low noise digital PFD · Precision, programmable · Programmable

Consulte o preço

Ver ficha técnica →

ADF4154BRUZ-RL

✅ Drop-In
📦 16-lead TSSOP
Core electrical ratings remain at 4 GHz and show 0% RF-bandwidth difference; the distinction is order and reel configuration.

📋 Alternativa de referência (fora do catálogo)

ADF4154BRUZ-ND

✅ Drop-In
📦 16-lead TSSOP
Core RF bandwidth remains 4 GHz with 0% difference; the order code identifies a distinct production configuration.

📋 Alternativa de referência (fora do catálogo)

ADF4154BRUZ Especificações

Device Type Fractional-N frequency synthesizer
RF Bandwidth 4 GHz
Supply Voltage Range 2.7 V to 5.5 V
Corrente de alimentação 20 mA
Nominal Supply Condition 3.3 V
Prescaler Ratios 4/5 and 8/9
Prescaler Type Programmable dual-modulus
Charge Pump Current Programmable
Phase Detector Type Low-noise digital phase-frequency detector
Reference Divider Programmable
Fractional-N Architecture Sigma-delta fractional interpolator
Serial Interface 3-wire
Package Type 16-lead TSSOP
Package Width 4.40 mm
Package Length 0.173 in
Tipo de montagem Surface mount
Extended Tuning Supply VP connection supported

Guia de Configuração de Pinos do ADF4154BRUZ 0.173 in

Configuração de pinos para ADF4154BRUZ (pacote 0.173 in). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 0.173 in para ADF4154BRUZ

Nenhum dado detalhado de pinagem disponível para ADF4154BRUZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADF4154BRUZ é adequado para 6 aplicaçãos: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Frequency Conversion Test Equipment, RF Instrumentation and Signal Generators, Industrial RF Control and Monitoring, RF Power and Frequency-Control Systems.

🌐

Wireless Receiver Local Oscillator

The ADF4154BRUZ fits a wireless receiver local oscillator because it generates programmable fractional-N frequencies for RF down-conversion stages. Its 4 GHz RF bandwidth covers common microwave receiver paths, while the programmable 4/5 and 8/9 dual-modulus prescaler supports different synthesis ratios. The 3.3 V nominal supply and 20 mA listed supply current are suitable for compact RF front ends. Designers should select the reference divider and loop-filter values together, then confirm lock margin, settling behavior, and phase noise in the receiver’s channel plan.

📡

Wireless Transmitter Up-Conversion

In a wireless transmitter up-conversion chain, the ADF4154BRUZ can synthesize the local-oscillator frequency applied to a mixer. Its fractional-N architecture permits fine frequency adjustments, while the programmable prescaler and charge-pump current help adapt the PLL to the selected reference and loop bandwidth. The 4 GHz RF capability reaches microwave transmit frequencies, and the 16-lead TSSOP preserves a compact surface-mount footprint. Validate output-frequency range, tuning-voltage margin, phase noise, and reference isolation before production release.

🖥️

Frequency Conversion Test Equipment

The ADF4154BRUZ is suitable for programmable frequency-conversion equipment that needs a fractional-N local oscillator with output frequencies up to 4 GHz. Fine fractional steps allow test systems to position an LO precisely around an RF channel, while the programmable reference divider and charge pump provide design flexibility. Use the 2.7 V to 5.5 V operating range to align with the surrounding test instrument architecture. Reference phase noise, spur levels, calibration method, and loop settling must be evaluated for the intended measurement bandwidth.

📺

RF Instrumentation and Signal Generators

The ADF4154BRUZ can serve as the programmable synthesis element in compact RF instrumentation and signal-generation equipment. Its sigma-delta fractional interpolator supports fine frequency resolution, while the dual-modulus prescaler accommodates different integer division requirements. A 16-lead TSSOP package simplifies high-density assembly, and the listed 20 mA supply current supports power-conscious test products. Designers should account for VCO isolation, reference spur coupling, loop-filter component tolerances, and calibration drift when defining instrument-level phase-noise performance.

🏭

Industrial RF Control and Monitoring

The ADF4154BRUZ can provide a programmable local oscillator in industrial RF monitoring systems operating below its 4 GHz bandwidth. Fractional frequency resolution supports accurate channel placement, and the three-wire control interface allows straightforward integration with an embedded controller. The 2.7 V to 5.5 V supply range and surface-mount TSSOP package are practical for compact industrial electronics. Confirm long-term reference stability, temperature behavior, lock reliability, and electromagnetic compatibility before installing the synthesizer next to high-power RF circuitry.

⚡

RF Power and Frequency-Control Systems

The ADF4154BRUZ can support frequency-control systems that require programmable RF excitation or a feedback-related synthesizer reference. Its 4 GHz bandwidth, programmable prescaler, and adjustable charge-pump current make it suitable for closing a frequency loop around a compatible RF subsystem. The separate VP capability can extend tuning-voltage headroom when required by the external VCO arrangement. Engineering validation should cover startup lock, tuning-range boundaries, phase noise, spur rejection, and fault behavior when the feedback signal is lost.

What is the ADF4154BRUZ?
The ADF4154BRUZ is an Analog Devices fractional-N frequency synthesizer used to generate programmable local-oscillator signals in RF receivers and transmitters. It supports RF operation to 4 GHz from a 2.7 V to 5.5 V supply and is packaged in a 16-lead TSSOP. According to the Analog Devices ADF4154 product information, the architecture combines a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a sigma-delta fractional interpolator.
What are the key specifications of ADF4154BRUZ that engineers should know?
The main ADF4154BRUZ specifications are a 4 GHz RF bandwidth, a 2.7 V to 5.5 V supply range, a listed 20 mA supply current, and a 16-lead TSSOP package. It also provides programmable 4/5 and 8/9 dual-modulus prescaler ratios, programmable charge-pump current, a programmable reference divider, and a sigma-delta fractional interpolator. These functions define the device as a configurable fractional-N PLL rather than a fixed-frequency clock source.
Where can I download the ADF4154BRUZ datasheet PDF?
The official ADF4154BRUZ datasheet PDF is available from the Analog Devices technical-document link on this page. The document is titled ADF4154 and is identified on the product page as Data Sheet Rev. C. Use the manufacturer document for the complete pin-description table, electrical characteristics, reference-divider limits, prescaler settings, charge-pump options, and application circuit details.
Where can I find the ADF4154BRUZ pinout?
Use the pin-description table in the official Analog Devices ADF4154 datasheet to assign the 16 TSSOP pins. The package diagram on this page identifies the physical footprint, while the manufacturer datasheet provides authoritative signal names, directions, and operating details. Do not infer pins from the three-wire serial-interface description alone, because the package also contains supply, reference, feedback, charge-pump, and tuning-voltage connections.
What voltage supply does the ADF4154BRUZ require?
The ADF4154BRUZ accepts a supply voltage from 2.7 V to 5.5 V, and 3.3 V is identified as the nominal operating condition in the product information. The Analog Devices ADF4154 product page lists this range under the device features. Decoupling and routing must follow the pin-description and application guidance in the manufacturer datasheet, particularly for the sensitive reference and feedback paths.
Can the ADF4154BRUZ operate at 4 GHz?
Yes. The ADF4154BRUZ has a maximum RF bandwidth of 4 GHz, as stated by Analog Devices and the product listing. This bandwidth describes the device capability rather than guaranteeing lock, output power, or acceptable phase noise in every 4 GHz design. Actual performance also depends on the reference frequency, divider settings, loop filter, charge-pump current, VCO characteristics, and feedback arrangement.
What kind of PLL is the ADF4154BRUZ?
The ADF4154BRUZ is a fractional-N PLL frequency synthesizer with a programmable dual-modulus prescaler, programmable charge-pump current, and programmable reference divider. According to the Analog Devices product information, its sigma-delta fractional interpolator permits programmable fractional-N division. The device is therefore suited to RF local oscillators where programmable frequency and fine frequency resolution are both required.
Where can I buy ADF4154BRUZ and check price?
Use the Request a Quote form on this page to request ADF4154BRUZ availability, current pricing, and the required order quantity. The component is a 16-lead TSSOP fractional-N synthesizer, and its exact ordering suffix must remain unchanged when seeking a source-compatible quotation. Current commercial terms should be confirmed through the form because inventory and lead time can change independently of the device specification.
What is the lead time for ADF4154BRUZ?
Request the current ADF4154BRUZ lead time through the Request a Quote form on this page. Lead time depends on order quantity, current inventory, production scheduling, and packaging requirements. Analog Devices identifies the ADF4154 as recommended for new designs, which supports long-term design planning, but it does not by itself establish a shipment date or a guaranteed quantity available.
Is ADF4154BRUZ in stock?
The current ADF4154BRUZ stock position should be confirmed through the Request a Quote form on this page. The manufacturer identifies the ADF4154 as recommended for new designs, but that lifecycle statement does not establish a real-time inventory quantity. Include your required quantity, target delivery date, and acceptable packaging in the request for an actionable supply response.
What is the difference between ADF4154BRUZ and a direct PLL replacement?
A valid direct replacement must match the 16-lead TSSOP footprint, pin functions, supply range, prescaler architecture, and control interface, as well as remain close to the 4 GHz bandwidth and 20 mA supply-current ratings. The alternatives search did not identify a documented pin-compatible substitute with sufficient comparative detail. Treat functionally similar fractional-N synthesizers as redesign candidates unless their manufacturer confirms pin-to-pin compatibility.
What is the best drop-in replacement for ADF4154BRUZ?
No documented drop-in replacement for the ADF4154BRUZ was confirmed by the available manufacturer and cross-reference information. The ADF4154BRUZ uses a specific 16-lead TSSOP arrangement and includes programmable 4/5 and 8/9 prescaling, a reference divider, charge-pump controls, and a three-wire interface. Before accepting a substitute, compare every pin and verify the required frequency range, reference-divider ratio, tuning range, and loop-filter behavior.
Can another PLL replace ADF4154BRUZ without changing the PCB?
Only a replacement explicitly documented as pin-to-pin compatible should be used without changing the PCB. The available cross-reference results do not establish such a part for the ADF4154BRUZ, so a verified 16-lead TSSOP alternative is not currently recommended. Ask the candidate manufacturer for its pin table, register map, and application schematic, then compare those items with the Analog Devices datasheet before authorizing a substitution.
When should I choose ADF4154BRUZ over an integer-N PLL?
Choose the ADF4154BRUZ when programmable fractional division is valuable for frequency resolution and the design can control loop bandwidth, spur behavior, and settling performance. An integer-N PLL may be simpler when only integer frequency steps are required. The ADF4154BRUZ offers a programmable 4/5 or 8/9 dual-modulus prescaler, programmable charge-pump current, and a sigma-delta fractional interpolator, giving more tuning flexibility for RF local oscillators.
Is ADF4154BRUZ suitable for wireless transmitter and receiver designs?
Yes. The ADF4154BRUZ is designed for programmable local oscillators in wireless receiver and transmitter up-conversion and down-conversion sections. Its 4 GHz RF bandwidth, fractional-N architecture, programmable reference divider, and programmable dual-modulus prescaler support this use. The final design must still verify lock range, tuning voltage, reference-noise performance, and phase-noise requirements against the particular RF signal chain.
How should the ADF4154BRUZ loop filter be selected?
Select the ADF4154BRUZ loop filter from the reference frequency, phase detector gain, charge-pump current, prescaler, target loop bandwidth, and required settling time. The Analog Devices datasheet provides the charge-pump and synthesizer characteristics needed for the calculation. Verify lock margin and fractional-N spur behavior in simulation before fabrication, because a filter that meets tuning-range requirements can still produce unacceptable phase noise or settling performance.

Dados de referência de engenharia para ADF4154BRUZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADF4154BRUZ when an RF system needs programmable fractional-N frequency synthesis up to 4 GHz and the design can accommodate its 16-lead TSSOP footprint. It is especially useful when fine channel spacing, selectable 4/5 or 8/9 prescaling, programmable charge-pump current, and a programmable reference divider are important. An integer-N PLL may be preferable for simpler systems that need only whole-number frequency steps. No drop-in substitute was confirmed, so components from another PLL family should be treated as redesign candidates unless their manufacturer explicitly confirms pin-to-pin compatibility, register functionality, reference-divider range, and electrical equivalence. The final choice should also be based on lock margin, phase noise, fractional spur performance, settling time, tuning-voltage range, and supply-noise sensitivity rather than maximum frequency alone.

Comparação com alternativas

Parâmetro Este produto
Brand Analog Devices
Package 16-lead TSSOP, 4.40 mm width
Device Type Fractional-N frequency synthesizer
RF Bandwidth 4 GHz
Supply Voltage Range 2.7 V to 5.5 V
Supply Current 20 mA
Prescaler Programmable dual-modulus, 4/5 and 8/9
Charge Pump Programmable current
Control Interface 3-wire serial interface
Fractional-N Method Sigma-delta fractional interpolator

Principais diferenciais

  • Fractional-N frequency resolution with selectable prescaler ratios (vs Unconfirmed integer-N PLL candidate)
  • Programmable loop and reference controls (vs Unconfirmed fixed-setting PLL candidate)
  • Compact 16-lead TSSOP implementation (vs Unconfirmed larger-package PLL candidate)

Notas de projeto

Route the reference input, phase-detector feedback, and charge-pump connections as short, controlled-impedance traces, and keep the loop-filter components close to the corresponding device pins. Keep switching regulators, high-current digital returns, and noisy reference sources away from these paths. Ground-plane discontinuities beneath the sensitive RF and feedback routes can change the loop behavior that was calculated with a continuous reference plane.

Follow the Analog Devices datasheet when separating the VP connection and supplying the core and tuning circuits. Decouple each supply domain at the device pins, and keep return-current paths short so switching noise does not enter the charge-pump or reference nodes. Because the device has a 2.7 V to 5.5 V supply range, verify that every rail remains within its limit at startup, shutdown, and maximum RF operating conditions.

Do not assume that a synthesizer supporting 4 GHz will lock across every 4 GHz VCO design. Check the required output range, prescaler mode, reference-divider ratio, available tuning voltage, and feedback-divider range against the external RF subsystem. Calculate the loop-filter values with the intended charge-pump current and then verify phase noise, fractional-N spurs, and settling time in simulation before fabrication.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Analog Devices identifies the ADF4154 as recommended for new designs. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADF4154BRUZ datasheet ADF4154BRUZ pinout ADF4154BRUZ datasheet pdf ADF4154BRUZ specifications ADF4154BRUZ 4 GHz fractional N synthesizer ADF4154BRUZ TSSOP pinout ADF4154BRUZ application circuit ADF4154BRUZ replacement ADF4154BRUZ equivalent ADF4154BRUZ price ADF4154BRUZ stock Analog Devices ADF4154BRUZ

Componentes & termos relacionados

Analog Devices ADF4154BRUZ ADF4154 fractional-N frequency synthesizer phase-locked loop PLL local oscillator sigma-delta fractional interpolator dual-modulus prescaler phase-frequency detector charge pump reference divider 3-wire serial interface 16-lead TSSOP TSSOP family surface-mount package SMD RF bandwidth 4 GHz 2.7 V to 5.5 V supply wireless receiver wireless transmitter frequency conversion RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ