Analog Devices

ADF4156BRUZ-RL7 - 6.2 GHz Fractional-N PLL | Analog Devices

N.º da peça: ADF4156BRUZ-RL7 ✓ Ativo
16-lead TSSOP, 4.40 mm width Package 6.2 GHz Speed
MOQ: 1 |

ADF4156BRUZ-RL7 Visão geral

The Analog Devices ADF4156BRUZ-RL7 is a 6.2 GHz fractional-N frequency synthesizer with a programmable phase detector, precision charge pump, reference divider, and Sigma-Delta fractional interpolator in a 16-lead TSSOP package. It generates local oscillator signals for wireless receiver and transmitter up-conversion and down-conversion stages. The device accepts an RF input frequency of at least 500 MHz and provides programmable output phase for systems requiring a defined relationship between the output and reference signals.

A fractional-N frequency synthesizer is a clock-and-timing IC that generates an output frequency by dividing a reference frequency while using a fractional-N technique to achieve fine frequency resolution without requiring a very high reference frequency. It belongs to the PLL and frequency-synthesizer hierarchy, where the phase-frequency detector compares the feedback signal with the reference, the charge pump drives the loop filter, and the programmable divider and interpolator establish the output frequency.

The ADF4156BRUZ-RL7 combines a maximum synthesizer frequency of 6.2 GHz with fractional-N frequency synthesis and programmable RF output phase. Its 3-wire serial interface provides access to the on-chip registers, while cycle-slip-reduction circuitry is designed to improve lock behavior without changes to the external loop filter. These features make the device suitable for phase-coherent RF systems in which predictable acquisition and repeatable phase relationships are important.

The RF input specification begins at 500 MHz, but lower RF frequencies can be used when the input signal satisfies the specified minimum slew rate of 400 V/us. This distinction matters when driving the synthesizer from a low-frequency source: a clean, fast edge may be more important than the nominal frequency alone. The manufacturer datasheet also notes that an appropriate LVDS driver such as the FIN1001 can square up an RF signal before it is applied to the ADF4156 RF input.

Typical applications include wireless receiver local oscillators, wireless transmitter up-converters, frequency conversion in communication equipment, phase-controlled RF signal generation, test-and-measurement synthesizers, and instrumentation requiring programmable fractional-N frequency generation. The programmable phase feature is particularly useful when multiple coherent outputs or calibrated phase relationships are required within a system.

PCB implementation requires a clean RF input path, correct grounding around the sensitive PFD and charge-pump circuits, and placement of loop-filter components close to the associated pins. The loop-filter values determine loop bandwidth, reference spur performance, phase noise, and lock time. Designers should review the manufacturer’s evaluation-board layout and register guidance before committing a new layout to production.

This page combines the manufacturer’s device description with engineering-focused guidance for RF layout, loop-filter design, interface configuration, and part selection. It also distinguishes the exact ADF4156BRUZ-RL7 ordering code from broader ADF4156 variants and identifies where a true pin-to-pin replacement must be reviewed before PCB reuse.

Alternativas drop-in para ADF4156BRUZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ADF4156BRUZ-RL7 Especificações

Maximum Synthesizer Frequency 6.2 GHz
Minimum Specified RF Input Frequency 500 MHz
Minimum RF Input Slew Rate 400 V/us
Architecture Fractional-N frequency synthesizer
Phase Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Fractional Interpolator Sigma-Delta based
Reference Divider Programmable
RF Output Phase Programmable
Register Interface 3-wire serial interface
Cycle-Slip Reduction Supported
Encapsulamento 16-lead TSSOP, 4.40 mm width
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ADF4156BRUZ-RL7 16-lead tssop, 4.40 mm width

Configuração de pinos para ADF4156BRUZ-RL7 (pacote 16-lead tssop, 4.40 mm width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-lead tssop, 4.40 mm width para ADF4156BRUZ-RL7

Nenhum dado detalhado de pinagem disponível para ADF4156BRUZ-RL7.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADF4156BRUZ-RL7 é adequado para 6 aplicaçãos: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Converter, Phase-Coherent RF Signal Generation, RF Channelizer and Frequency Converter, RF Communication Equipment, Frequency-Selective Measurement.

🌐

Wireless Receiver Local Oscillator

The ADF4156BRUZ-RL7 fits receiver down-conversion paths that require a programmable local oscillator with fine frequency resolution. Its 6.2 GHz maximum synthesis frequency covers common RF conversion stages, while the Sigma-Delta fractional interpolator permits a fractional relationship between the reference and RF output. The programmable output phase can support coherent receiver calibration, and the 3-wire interface allows frequency, divider, and phase settings to be integrated into the receiver control firmware.

📡

Wireless Transmitter Up-Converter

The ADF4156BRUZ-RL7 is suitable for transmitter up-conversion stages where a local oscillator must be programmed precisely and remain phase-coherent with the reference. Its maximum 6.2 GHz synthesis capability supports RF signal chains operating below that limit, while the programmable phase function allows deliberate calibration offsets. Cycle-slip-reduction circuitry can improve acquisition behavior, although final lock time still depends on the external loop-filter design and initial frequency error.

🖥️

Phase-Coherent RF Signal Generation

Programmable RF output phase makes the ADF4156BRUZ-RL7 useful in test systems that compare signals against a shared reference. A 6.2 GHz upper synthesis limit covers many instrumentation and communication test frequencies, while fractional-N operation supports fine frequency placement between integer channels. The device can produce a calibrated phase relationship between the synthesized output and the reference, helping simplify measurement setup and repeatable phase-sensitive testing.

🌐

RF Channelizer and Frequency Converter

The ADF4156BRUZ-RL7 can serve as the synthesizer in channelizer or frequency-converter designs that require programmable local-oscillator frequency. Its 6.2 GHz maximum output capability, programmable reference divider, and fractional interpolator provide flexible frequency planning from a stable reference source. The three-wire control interface simplifies integration with a microcontroller or FPGA-based controller, while programmable phase provides an additional degree of freedom for coherent multi-channel conversion architectures.

🌐

RF Communication Equipment

The ADF4156BRUZ-RL7 is appropriate for radio equipment requiring a compact fractional-N frequency source with programmable phase. Its 16-lead TSSOP package supports surface-mount assembly, and the integrated PFD, precision charge pump, programmable reference divider, and fractional interpolator reduce the number of external synthesizer functions required. Designers should preserve a compact loop-filter layout and keep switching-node or digital-control coupling away from the RF input.

📡

Frequency-Selective Measurement

The ADF4156BRUZ-RL7 can provide a programmable source for RF measurement systems requiring precise frequency and phase settings. Operation up to 6.2 GHz supports common test ranges, and fractional-N synthesis allows fine channel placement without requiring an exceptionally high reference frequency. Programmable output phase supports phase-sensitive measurements, while cycle-slip reduction can help acquisition, subject to correct loop-filter bandwidth and charge-pump configuration.

Resumo dos produtos recomendados

ADF4156BRUZ Analog Devices Usado em: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Converter, Phase-Coherent RF Signal Generation, RF Channelizer and Frequency Converter, RF Communication Equipment, Frequency-Selective Measurement FIN1001 LVDS driver identified for squaring up the RF input signal Usado em: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Converter, Phase-Coherent RF Signal Generation, RF Channelizer and Frequency Converter, RF Communication Equipment, Frequency-Selective Measurement
What are the key specifications of ADF4156BRUZ-RL7 that engineers should know?
The ADF4156BRUZ-RL7 is a 6.2 GHz fractional-N frequency synthesizer in a 16-lead TSSOP package. According to the Analog Devices manufacturer datasheet, it combines a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a Sigma-Delta fractional interpolator. It also supports programmable RF output phase, cycle-slip reduction, and register control through a 3-wire interface.
Where can I download the ADF4156BRUZ-RL7 datasheet PDF?
The official ADF4156 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4156.pdf. Use the pin-description table, register map, RF input requirements, and application information in that manufacturer document when designing the ADF4156BRUZ-RL7. The -RL7 suffix identifies the specific tape-and-reel ordering option associated with the 16-lead TSSOP device.
What is the maximum operating frequency of the ADF4156BRUZ-RL7?
The ADF4156BRUZ-RL7 supports synthesis frequencies up to 6.2 GHz. According to the Analog Devices manufacturer datasheet, the device is intended for local-oscillator generation in wireless receiver and transmitter up-conversion and down-conversion sections. Its architecture includes a programmable divider and Sigma-Delta fractional interpolator, allowing the RF output to be set from the reference frequency and programmed register values.
Can the ADF4156BRUZ-RL7 accept an RF input below 500 MHz?
The ADF4156BRUZ-RL7 can operate with a lower RF input when the input meets the required minimum slew rate of 400 V/us. According to the Analog Devices manufacturer datasheet, 500 MHz is the specified minimum RF input frequency, but lower frequencies may work when edge speed is adequate. The manufacturer identifies an LVDS driver such as the FIN1001 as one possible way to square up the signal.
What programming interface does the ADF4156BRUZ-RL7 use?
The ADF4156BRUZ-RL7 uses a 3-wire serial interface for controlling its on-chip registers. According to the Analog Devices manufacturer datasheet, this interface supports configuration of the frequency divider, reference path, charge-pump settings, phase adjustment, and other synthesizer functions. PCB implementation should keep the interface traces away from sensitive RF and high-current charge-pump paths to reduce coupling.
Why does the ADF4156BRUZ-RL7 include programmable RF output phase?
Programmable RF output phase lets the ADF4156BRUZ-RL7 establish a deliberate relationship between the synthesized output and the reference signal. According to the Analog Devices manufacturer datasheet, this feature is useful when a system requires a particular phase relationship. It can support coherent RF architectures in which predictable phase offsets are needed during calibration, modulation, or multi-chain synchronization.
How does cycle-slip reduction help the ADF4156BRUZ-RL7 acquire lock?
The ADF4156BRUZ-RL7 includes cycle-slip-reduction circuitry intended to improve lock behavior without requiring changes to the external loop filter. According to the Analog Devices manufacturer datasheet, this feature can produce faster lock times in suitable loop configurations. The actual acquisition time still depends on reference frequency, divider settings, charge-pump current, loop-filter values, and the initial frequency error.
What should designers consider when laying out the ADF4156BRUZ-RL7 PCB?
The ADF4156BRUZ-RL7 PCB should provide a short, controlled RF input path and solid grounding around the PFD, charge pump, and RF sections. Place the external loop-filter components close to their associated pins and follow the Analog Devices evaluation-board layout in the manufacturer datasheet. Keeping the 3-wire control bus away from the RF input and charge-pump paths helps prevent unwanted modulation of the synthesized output.
What can replace the ADF4156BRUZ-RL7?
A replacement should preserve the 16-lead TSSOP footprint, 6.2 GHz class RF capability, fractional-N operation, register interface, and critical electrical limits. The ADF4156BRUZ ordering code represents the same core device in a different packaging option, while older ADF4106, ADF4107, and ADF4113 families are not automatic drop-in replacements because their synthesis architecture and feature sets differ. Request the current replacement options through the Request a Quote form on this page.
Is the ADF4156BRUZ-RL7 the same as the ADF4156BRUZ?
The ADF4156BRUZ-RL7 and ADF4156BRUZ identify the same ADF4156 fractional-N synthesizer core in 16-lead TSSOP form, with -RL7 denoting the reel-packaging ordering option. A non-reel packaged version is not a distinct functional substitute for a design requiring reel-fed assembly. Engineers should confirm the exact ordering code, pin configuration, temperature grade, and tape orientation before substituting one package code for another.
When should I choose the ADF4156BRUZ-RL7 over an integer-N PLL?
Choose the ADF4156BRUZ-RL7 when fine frequency resolution, programmable output phase, and operation near 6.2 GHz are more important than using an older integer-N architecture. Its Sigma-Delta fractional interpolator supports fractional frequency ratios, while the programmable reference divider, precision charge pump, and cycle-slip-reduction circuitry support modern phase-locked-loop designs. An integer-N part may be considered only when the required frequency plan and architecture permit it.
Is the ADF4156BRUZ-RL7 suitable for wireless receiver and transmitter designs?
The ADF4156BRUZ-RL7 is specifically intended for wireless receiver and transmitter up-conversion and down-conversion sections. According to the Analog Devices manufacturer datasheet, its maximum synthesizer frequency is 6.2 GHz and its RF input begins at 500 MHz. It is therefore well matched to RF local-oscillator designs requiring programmable phase and fractional-N frequency generation.
What is the lead time and stock status of the ADF4156BRUZ-RL7?
The current lead time, minimum order quantity, and stock status for the exact ADF4156BRUZ-RL7 ordering code should be confirmed through the Request a Quote form on this page. The RF frequency synthesizer’s supply status can vary with the exact suffix, package option, and production allocation. Request the part number, target quantity, and required delivery date to obtain an actionable quotation.
Where can I buy the ADF4156BRUZ-RL7 online?
The ADF4156BRUZ-RL7 can be requested through the Request a Quote form on this page. Include the exact MPN, reel quantity, shipment destination, and required date when requesting a quotation. The form provides a single purchasing channel for current commercial terms without embedding a price that may change independently of the page.
What is the price of the ADF4156BRUZ-RL7?
Use the Request a Quote form on this page to request the current commercial terms for the ADF4156BRUZ-RL7. Quote requests should identify the reel quantity and delivery requirements so the response reflects the correct ordering option. The component is a fractional-N frequency synthesizer in a 16-lead TSSOP package, and its orderable configuration includes the -RL7 suffix.
How does the ADF4156BRUZ-RL7 compare with the ADF4113BRU-REEL7?
The ADF4156BRUZ-RL7 is a 6.2 GHz fractional-N synthesizer, while the ADF4113BRU-REEL7 belongs to an older integer-N synthesizer family with different maximum-frequency, phase-detector, and feature characteristics. According to the manufacturer documentation for each device, they are not equivalent drop-in devices even though both can appear in 16-lead TSSOP packages. Use the ADF4156BRUZ-RL7 when fractional-N resolution and programmable output phase are required.

Dados de referência de engenharia para ADF4156BRUZ-RL7 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADF4156BRUZ-RL7 when the design requires a fractional-N synthesizer with operation up to 6.2 GHz, programmable RF output phase, and register control through a 3-wire interface. It is particularly appropriate for wireless local oscillators, phase-coherent RF generation, and fine-resolution frequency synthesis. The ADF4113BRU-REEL7, ADF4106SRU-EP-R7, and ADF4107BRU-REEL7 should not be treated as automatic drop-in substitutes because they belong to older integer-N families with different frequency limits, register maps, and internal architectures. The ADF4156BRUZ is the same core ordering option without the -RL7 reel suffix, making it relevant when assembly packaging differs, but it does not provide a distinct functional upgrade. Before changing devices, verify pin functions, supply limits, register programming, loop-filter values, RF input slew rate, and thermal performance.

Comparação com alternativas

Parâmetro Este produto
Package 16-lead TSSOP, 4.40 mm width
Brand Analog Devices
Maximum Synthesizer Frequency 6.2 GHz
Minimum Specified RF Input Frequency 500 MHz
Minimum RF Input Slew Rate 400 V/us
Synthesis Architecture Fractional-N
Fractional Interpolator Sigma-Delta based
RF Output Phase Programmable
Register Interface 3-wire serial interface
Cycle-Slip Reduction Supported

Principais diferenciais

  • Higher maximum synthesis frequency than older integer-N PLL families (vs ADF4113BRU-REEL7)
  • Programmable RF output phase for coherent signal generation (vs ADF4106SRU-EP-R7)
  • Sigma-Delta fractional interpolator for fine frequency placement (vs ADF4107BRU-REEL7)

Notas de projeto

Keep the RF input route short, impedance-controlled, and isolated from the digital control bus and loop-filter return paths. Place the loop-filter network close to the corresponding ADF4156 pins and provide a low-impedance ground connection. Use the Analog Devices evaluation-board layout as the starting point for component placement because the PFD, charge pump, and RF sections can be sensitive to trace coupling.

The RF input must meet the specified 400 V/us minimum slew rate even when the source frequency is below 500 MHz. A slow edge can degrade phase-detector operation and prevent reliable locking. When conditioning a lower-frequency source, evaluate a fast differential driver such as the FIN1001 and confirm input amplitude, slew rate, common-mode level, and return-path continuity before fabrication.

Do not treat an older PLL with the same package count as a functional drop-in replacement. The ADF4156 uses fractional-N interpolation, programmable RF output phase, and cycle-slip-reduction circuitry, while older ADF4106, ADF4107, and ADF4113 families use different synthesis architectures and register functions. Replacing the device requires review of the pin assignment, electrical limits, register map, loop-filter design, and firmware sequence.

Route the 3-wire serial interface away from the RF input and sensitive charge-pump area, and provide a quiet reference path with minimal impedance discontinuity. Keep ground returns continuous beneath the device and separate noisy return currents from the PFD and fractional interpolator sections. Grounding and component placement materially influence phase noise, reference spurs, and acquisition behavior in fractional-N synthesizers.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page and datasheet do not establish the requested compliance fields in the cited material. Automotive qualification is not claimed for this ordering code.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADF4156BRUZ-RL7 datasheet ADF4156BRUZ-RL7 datasheet pdf ADF4156BRUZ-RL7 pinout ADF4156BRUZ-RL7 equivalent ADF4156BRUZ-RL7 replacement ADF4156BRUZ-RL7 cross reference ADF4156BRUZ-RL7 price ADF4156BRUZ-RL7 stock ADF4156BRUZ-RL7 footprint Analog Devices ADF4156BRUZ-RL7 ADF4156BRUZ-RL7 vs ADF4113BRU-REEL7 ADF4156BRUZ-RL7 6.2 GHz fractional-N PLL

Componentes & termos relacionados

Analog Devices ADF4156BRUZ-RL7 ADF4156BRUZ ADF4113BRU-REEL7 ADF4106SRU-EP-R7 ADF4107BRU-REEL7 fractional-N frequency synthesizer frequency synthesizer phase-locked loop PLL phase-frequency detector PFD precision charge pump Sigma-Delta fractional interpolator programmable reference divider programmable RF output phase cycle-slip reduction 3-wire serial interface 16-lead TSSOP TSSOP package family surface-mount device local oscillator wireless receiver wireless transmitter FIN1001
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ