Analog Devices

ADF4372BCCZ-RL7 - 16 GHz Integer-N PLL Synthesizer | Analog Devices

N.º da peça: ADF4372BCCZ-RL7 ✓ Ativo
48-pin TFLGA with exposed pad Package 16 GHz Speed
MOQ: 1 |

ADF4372BCCZ-RL7 Visão geral

Analog Devices ADF4372BCCZ-RL7 is an integer-N phase-locked-loop frequency synthesizer with an integrated voltage-controlled oscillator, a maximum output frequency of 16 GHz, and a 48-lead TFLGA package with an exposed pad. Its VCO fundamental range extends from 4 GHz to 8 GHz, while programmable RF outputs cover 62.5 MHz to 16 GHz.

A phase-locked loop, or PLL, synchronizes an output oscillator to a stable reference frequency. The ADF4372 integrates the VCO and synthesizer circuitry into one RF device, allowing a reference oscillator and external loop filter to define a phase-locked output. Its integer-N architecture avoids the fractional-N spur and phase-noise behavior associated with fractional dividers, making it suitable for coherent RF systems requiring predictable spectral content.

The device supports RF division by 1, 2, 4, 8, 16, 32, or 64. This allows the 4 GHz to 8 GHz VCO fundamental to be divided down to outputs as low as 62.5 MHz at RF8x. A frequency multiplier provides an 8 GHz to 16 GHz range at RF16x, and RFAUX8x provides an auxiliary output at the eighth-divider frequency.

As an integer-N synthesizer, the ADF4372 provides a single programmable output path rather than independent fractional and integer divider systems. The implementation requires an external reference and loop filter. Loop-filter component values determine reference-to-output multiplication ratio, bandwidth, phase noise, and transient behavior, so the reference frequency and target channel spacing must be considered together during design.

Typical applications include microwave and millimeter-wave radio front ends, instrumentation, test and measurement equipment, radar-related signal generation, and wideband communication modules. The 16 GHz maximum output supports Ku-band and related RF systems, while the broad divided-output range allows the same synthesizer to support lower-frequency receiver and test circuits.

PCB implementation requires careful treatment of the exposed thermal pad, supply connections, RF outputs, and high-speed reference signals. The exposed pad must be connected to the ground plane with adequate thermal-via density, and the external loop filter should be positioned to minimize sensitive RF and feedback-trace coupling.

This page combines the ADF4372 frequency ranges, output architecture, package information, sourcing guidance, replacement considerations, and practical PCB-design guidance into a compact engineering reference for evaluating the ADF4372BCCZ-RL7 in integer-N RF synthesizer designs.

Alternativas drop-in para ADF4372BCCZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADF4372BCCZ-RL7 (mesmo formato e footprint) — diferindo em Auxiliary Output, PLL Architecture, Package, VCO Fundamental Frequency Range.

Analog Devices
Auxiliary Output: RFAUX8x duplicates the RF8x output
PLL Architecture: Integer-N and fractional-N with external loop filter
Package: 48-lead TFLGA with exposed pad (CCZ)
Comparar com ADF4372BCCZ-RL7 →

ADF4372BCCZ

✅ Drop-In
Analog Devices
📦 48-lead TFLGA with exposed pad
Integer-N / Fractional-N PLL frequency synthesizer with integrated VCO · 62.5 MHz to 16 GHz · 4000 MHz to 8000 MHz · 8 GHz to 16 GHz (RF16x) · 1, 2, 4, 8, 16, 32, 64 · 62.5 MHz at RF8x · RFAUX8x duplicates the RF8x output · Integer-N and fractional-N with external loop filter

Consulte o preço

Ver ficha técnica →

ADF4372BCCZ-RL7 Especificações

Product Type Integer-N phase-locked-loop frequency synthesizer with integrated VCO
Maximum Output Frequency 16 GHz
Minimum Divided Output Frequency 62.5 MHz at RF8x
VCO Fundamental Frequency Range 4 GHz to 8 GHz
RF16x Multiplier Output Range 8 GHz to 16 GHz
Available RF Divide Ratios 1, 2, 4, 8, 16, 32, or 64
Reference Input Frequency 10 MHz to 600 MHz
Reference Input Logic CMOS or ECL
PLL Architecture Integer-N
Tipo de saída Clock and RF outputs
Auxiliary Output RFAUX8x
Encapsulamento 48-pin TFLGA with exposed pad
Tipo de montagem Surface mount
Temperature Grade Industrial
Number of Terminals 48 terminals
External Loop Filter Required
Evaluation Support EV-ADF4372SD2Z

Guia de Configuração de Pinos do ADF4372BCCZ-RL7 48-pin tflga with exposed pad

Configuração de pinos para ADF4372BCCZ-RL7 (pacote 48-pin tflga with exposed pad). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 48-pin tflga with exposed pad para ADF4372BCCZ-RL7

Nenhum dado detalhado de pinagem disponível para ADF4372BCCZ-RL7.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADF4372BCCZ-RL7 é adequado para 6 aplicaçãos: Microwave Communication Local Oscillator, RF Test and Measurement Equipment, Ku-Band Signal Generation, Radar and Microwave Downconverter, Instrumentation and Calibration Signal, Wideband RF Signal Generator.

🌐

Microwave Communication Local Oscillator

The ADF4372BCCZ-RL7 fits microwave communication systems that require a programmable phase-locked source above 6 GHz. Its integrated VCO spans 4 GHz to 8 GHz, and the RF16x multiplier extends the signal path to 16 GHz, allowing one synthesizer to support multiple Ku-band-related conversion stages. The divider ratios of 1 through 64 also support lower-frequency receiver sections. In implementation, the device is driven by a stable external reference and completed with an external loop filter. The principal design tradeoff is that integer-N operation improves deterministic spur behavior, but the required multiplication ratio can increase reference spur sensitivity and phase noise when the reference-to-output ratio becomes large.

🔧

RF Test and Measurement Equipment

The ADF4372BCCZ-RL7 is well suited to laboratory signal sources that must cover a broad frequency span from 62.5 MHz to 16 GHz. The wide divided-output range lets one RF8x path serve lower-frequency test needs, while RF16x supports high-frequency measurements near 16 GHz. Its integer-N architecture provides a straightforward relationship between the reference, divider settings, and output channel. Designers should select the external loop-filter bandwidth according to the required lock time and phase-noise performance. A narrow loop improves close-in phase noise but generally requires longer acquisition time, while a wider loop locks faster at the cost of greater close-in noise.

📡

Ku-Band Signal Generation

The ADF4372BCCZ-RL7 supports Ku-band signal generation because its RF16x output path covers 8 GHz to 16 GHz. This range is useful for driving mixers, modulators, converters, and receiver test fixtures in broadband microwave systems. The integrated 4 GHz to 8 GHz VCO provides the source frequency from which the multiplier produces the final RF output. Layout quality remains critical: supply and ground connections must support the operating band, the exposed pad must have a low-impedance thermal path, and the external loop filter should remain isolated from sensitive RF output routing to avoid unwanted coupling into the feedback loop.

✈️

Radar and Microwave Downconverter

The ADF4372BCCZ-RL7 can provide a programmable local oscillator for radar, electronic-warfare, and microwave downconversion systems. Its 4 GHz to 8 GHz VCO range supports direct use in several microwave bands, while the divide chain lowers the available output to 62.5 MHz for lower-frequency test or conversion functions. For coherent receivers, reference phase noise and the loop-filter design directly influence close-in oscillator noise. Designers should avoid placing the feedback divider and loop filter beneath high-energy RF paths, and should provide stable low-impedance supply planes to prevent supply modulation from appearing as phase noise on the synthesized carrier.

📺

Instrumentation and Calibration Signal

The ADF4372BCCZ-RL7 is useful in instrumentation that requires a stable, digitally controlled calibration source over a wide frequency span. Its programmable divider and multiplier paths allow the same synthesizer to cover 62.5 MHz through 16 GHz, reducing the need for separate narrow-band oscillators. The external reference establishes frequency accuracy, while the loop filter determines how quickly the output settles after a frequency change. For calibration systems, the complete reference chain and loop-filter components must meet the accuracy and stability requirements of the calibration source. Thermal gradients around the VCO and reference interface should also be minimized to avoid frequency drift unrelated to intentional channel changes.

📡

Wideband RF Signal Generator

The ADF4372BCCZ-RL7 supports compact wideband RF signal-generator modules by integrating the VCO and PLL functions into one 48-lead TFLGA device. Outputs from 62.5 MHz to 16 GHz cover a substantial portion of the microwave spectrum without requiring several separate VCOs. The product page for the ADF4372 identifies CMOS and ECL reference inputs, giving designers flexibility in how the reference clock is generated. The principal implementation challenge is maintaining clean, low-impedance power delivery while preserving phase noise. Layout should separate the reference and loop-filter region from RF outputs, use short ground connections, and provide the exposed pad with a dense thermal-via pattern to remove heat from the integrated VCO.

Resumo dos produtos recomendados

ADF4372BCCZ-RL7 Analog Devices Usado em: Microwave Communication Local Oscillator, RF Test and Measurement Equipment, Ku-Band Signal Generation, Radar and Microwave Downconverter, Instrumentation and Calibration Signal, Wideband RF Signal Generator EV-ADF4372SD2Z Evaluation platform for integrated-VCO PLL designs Usado em: Microwave Communication Local Oscillator, RF Test and Measurement Equipment, Ku-Band Signal Generation, Radar and Microwave Downconverter, Instrumentation and Calibration Signal, Wideband RF Signal Generator
What is the maximum output frequency of the ADF4372BCCZ-RL7?
The ADF4372BCCZ-RL7 supports a maximum output frequency of 16 GHz. According to the Analog Devices ADF4372 datasheet, the RF16x frequency multiplier generates outputs from 8 GHz to 16 GHz, while the integrated VCO operates over a 4 GHz to 8 GHz fundamental range. This makes the device suitable for wideband microwave signal-generation and communication designs.
What is the output frequency range of the ADF4372BCCZ-RL7?
The ADF4372BCCZ-RL7 can generate divided outputs down to 62.5 MHz at RF8x and multiplied outputs up to 16 GHz at RF16x. The Analog Devices ADF4372 datasheet identifies an integrated VCO fundamental range of 4 GHz to 8 GHz and programmable division by 1, 2, 4, 8, 16, 32, or 64.
Where can I download the ADF4372BCCZ-RL7 datasheet PDF?
The official ADF4372 datasheet PDF is available from Analog Devices at the product datasheet link on this page. The document describes the 4 GHz to 8 GHz integrated VCO, 8 GHz to 16 GHz multiplier output, programmable dividers, pin assignments, register behavior, reference inputs, and recommended application circuits.
Where can I find the ADF4372BCCZ-RL7 pinout?
The authoritative pinout is in the Analog Devices ADF4372 datasheet and its pin-description table. The device is packaged in a 48-lead TFLGA with an exposed pad, but a matching LGA-48 package drawing is not included in the XAIPART package library, so this page does not reproduce an unverified pin-number diagram. Use the manufacturer pin table when assigning PCB tracks.
Is the ADF4372BCCZ-RL7 an integer-N or fractional-N synthesizer?
The ADF4372BCCZ-RL7 is an integer-N frequency synthesizer. The Analog Devices product documentation states that the device can implement fractional-N or integer-N PLL architectures when used with an external loop filter and reference, but the designated ADF4372BCCZ-RL7 orderable device is identified as an integer-N synthesizer.
How does the ADF4372BCCZ-RL7 generate low-frequency outputs?
The ADF4372BCCZ-RL7 divides its VCO signal by programmable ratios of 1, 2, 4, 8, 16, 32, or 64. According to the Analog Devices datasheet, the divided path can produce an output as low as 62.5 MHz at RF8x, while the VCO itself operates from 4 GHz to 8 GHz.
What reference frequency can be used with the ADF4372BCCZ-RL7?
The ADF4372BCCZ-RL7 accepts a reference input from 10 MHz to 600 MHz. The Analog Devices product listing identifies CMOS and ECL reference inputs, allowing the synthesizer to operate with either single-ended CMOS sources or ECL-compatible reference signals when the board-level interface is designed accordingly.
What is the best drop-in replacement for the ADF4372BCCZ-RL7?
No independently verified cross-brand drop-in replacement was identified for the ADF4372BCCZ-RL7. The ADF4372BCCZ orderable variant is electrically the closest match because it represents the same ADF4372 device without the RL7 reel suffix, but it differs in delivery format rather than adding a distinct electrical option. Submit the required order code through the Request a Quote form for a confirmed sourcing match.
Can ADF4372BCCZ replace ADF4372BCCZ-RL7?
The ADF4372BCCZ can serve as an electrical substitute when its delivery format is acceptable because both identifiers denote the ADF4372 in the 48-lead TFLGA package. The practical distinction is the order suffix: RL7 identifies the reeled presentation, while the base order code uses a different delivery format. Confirm mounting, labeling, and packing requirements before substitution.
What is the difference between the ADF4372BCCZ and ADF4372BCCZ-RL7?
The ADF4372BCCZ and ADF4372BCCZ-RL7 identify the same core ADF4372 integer-N synthesizer in a 48-lead TFLGA package, with a frequency range extending to 16 GHz. Their principal commercial distinction is the order and packaging suffix, with RL7 denoting the reeled presentation. Electrical substitution still requires confirmation of packing and labeling requirements.
When should I choose the ADF4372BCCZ-RL7 for an RF design?
Choose the ADF4372BCCZ-RL7 when the design needs a phase-locked RF source spanning 62.5 MHz to 16 GHz and the system benefits from integer-N channel generation. It is particularly appropriate for wideband communication, microwave test equipment, and instrumentation requiring programmable division or RF16x multiplication from a stable external reference.
Is the ADF4372BCCZ-RL7 suitable for a 16 GHz signal source?
Yes, the ADF4372BCCZ-RL7 is suitable for a 16 GHz signal source. The Analog Devices datasheet states that the RF16x multiplier generates 8 GHz to 16 GHz outputs, enabling the device to serve as the local oscillator or reference source in microwave test, radar, and communication front ends.
How much do I need to know about the loop filter before using the ADF4372BCCZ-RL7?
You need the target output frequency, reference frequency, desired channel spacing, and acceptable phase-noise or lock-time behavior to design the external loop filter. The Analog Devices ADF4372 datasheet identifies the loop filter as an external circuit, so component selection and loop bandwidth cannot be treated as a fixed, universal recipe.
Where can I buy the ADF4372BCCZ-RL7 and what is its lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for the ADF4372BCCZ-RL7. The device is a specialized 16 GHz PLL synthesizer in a 48-lead TFLGA package, so packaging configuration and delivery schedule should be confirmed against the requested production quantity.
What are the key specifications of the ADF4372BCCZ-RL7 that engineers should know?
The ADF4372BCCZ-RL7 is an integer-N PLL synthesizer with an integrated 4 GHz to 8 GHz VCO, outputs from 62.5 MHz to 16 GHz, programmable divide ratios through 64, and a 48-lead TFLGA package with an exposed pad. The Analog Devices datasheet also identifies 10 MHz to 600 MHz CMOS or ECL reference-input capability and requires an external loop filter.
Can I evaluate the ADF4372 before designing a production board?
Yes, Analog Devices offers the EV-ADF4372SD2Z evaluation platform for evaluating the ADF4372 frequency synthesizer with its integrated VCO. The evaluation board includes power connections and SMA interfaces and requires a separate SDP-S board for software programming of the EV-ADF4372SD2Z.

Dados de referência de engenharia para ADF4372BCCZ-RL7 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADF4372BCCZ-RL7 when you need an integer-N microwave synthesizer with an integrated 4 GHz to 8 GHz VCO, RF16x multiplication to 16 GHz, and divided outputs down to 62.5 MHz. It is particularly useful for communication front ends, wideband test equipment, radar-related local oscillators, and compact RF signal generators. The ADF4372BCCZ is the closest alternate order code because it uses the same core device and 48-lead TFLGA package, but it should be selected when its non-RL7 delivery format satisfies production requirements. No cross-brand drop-in substitute is established because the RF divider architecture, reference interface, output mapping, programming behavior, and exposed-pad layout must all match for a genuine PCB-level replacement. Review the datasheet pin table and register description before approving any substitution.

Comparação com alternativas

Parâmetro Este produto ADF4372BCCZ
Brand Analog Devices Analog Devices
Package 48-lead TFLGA with exposed pad 48-lead TFLGA with exposed pad
Maximum Output Frequency 16 GHz 16 GHz
VCO Fundamental Range 4 GHz to 8 GHz 4 GHz to 8 GHz
Minimum Divided Output 62.5 MHz at RF8x 62.5 MHz at RF8x
RF16x Output Range 8 GHz to 16 GHz 8 GHz to 16 GHz
Reference Input Range 10 MHz to 600 MHz 10 MHz to 600 MHz
Synthesizer Architecture Integer-N Integer-N
RF Divide Ratios 1, 2, 4, 8, 16, 32, or 64 1, 2, 4, 8, 16, 32, or 64
Order Suffix RL7 reeled presentation Base order code without RL7 suffix

Principais diferenciais

  • Wide single-device frequency coverage (vs ADF4372BCCZ)
  • Integrated VCO plus multiplier architecture (vs ADF4372BCCZ)
  • Flexible reference implementation (vs ADF4372BCCZ)

Notas de projeto

Route the reference, loop-filter, RF-output, and supply connections according to the Analog Devices ADF4372 application guidance. Keep the external loop filter close to the synthesizer pins, minimize loop-area geometry, and avoid routing feedback-divider signals beneath RF outputs. The exposed pad should connect to a solid ground plane through multiple thermal and electrical vias so the integrated VCO can transfer heat without raising ground inductance.

Estimate junction-temperature rise using the actual VCO tuning voltage, supply voltage, and operating frequency before defining the board thermal solution. The exposed pad is an electrical ground connection and a primary heat-transfer path, so copper area and via count matter as much as the nominal package outline. Avoid placing the device near a temperature gradient if frequency stability is important, and validate the final assembly under the highest expected VCO operating condition.

Select the external loop filter for the required reference-to-output multiplication ratio, lock time, and phase-noise targets rather than copying a generic component set. A narrower loop generally trades faster settling for lower close-in phase noise, while a wider loop can improve acquisition at the cost of close-in noise. Keep the reference clock clean, provide local supply bypassing at the device, and use controlled-impedance RF routing for the 8 GHz to 16 GHz output paths.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The component is identified as an industrial-temperature-grade RF PLL synthesizer, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the manufacturer product material referenced for this page.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADF4372BCCZ-RL7 datasheet ADF4372BCCZ-RL7 pinout ADF4372BCCZ-RL7 datasheet pdf ADF4372BCCZ-RL7 equivalent ADF4372BCCZ-RL7 replacement ADF4372BCCZ-RL7 price ADF4372BCCZ-RL7 stock ADF4372BCCZ-RL7 footprint ADF4372BCCZ-RL7 application circuit Analog Devices ADF4372BCCZ-RL7 ADF4372 16 GHz integer N synthesizer ADF4372BCCZ vs ADF4372BCCZ-RL7

Componentes & termos relacionados

Analog Devices ADF4372BCCZ-RL7 ADF4372BCCZ ADF4372 EV-ADF4372SD2Z phase-locked loop PLL integer-N frequency synthesizer fractional-N synthesizer voltage-controlled oscillator VCO frequency multiplier RF16x RF8x RFAUX8x external loop filter reference clock 4 GHz to 8 GHz VCO 62.5 MHz to 16 GHz CMOS reference input ECL reference input TFLGA-48 QFN family surface mount SMD microwave test equipment Ku-band communication
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ