Analog Devices

ADM232AARWZ - 200 kB/s Dual RS-232 | Analog Devices

N.º da peça: ADM232AARWZ ✓ Ativo
5 V Vdss 16-lead SOIC, wide body Package
MOQ: 1 |

ADM232AARWZ Visão geral

The Analog Devices ADM232AARWZ is a dual, full RS-232 interface transceiver designed for data rates up to 200 kB/s. It operates from a single 5 V supply and uses a compact 0.1 µF external charge-pump capacitor arrangement. The device is offered in a 16-lead wide-body SOIC package and integrates two line drivers with two line receivers, making it suitable for bidirectional serial-port equipment.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 line levels and converts received RS-232 signals back into logic levels. It belongs to the interface IC hierarchy, alongside UART interface devices, level translators, and isolated communication transceivers. The ADM232A family is designed to simplify legacy and industrial serial connectivity without requiring a separate external negative supply.

The principal features of the ADM232AARWZ include two transmit channels, two receive channels, operation from one 5 V supply, and transmission rates up to 200 kB/s. Its on-chip charge pump supports operation with small 0.1 µF external capacitors. The integrated receiver and driver arrangement reduces component count on boards that need more than one RS-232 connection. The 16-lead SOIC package is a standard surface-mount format suitable for conventional PCB assembly.

The ADM232A is described by Analog Devices as a pin-compatible, high-speed upgrade for the AD232 and ADM232L families. This positioning makes it useful when a board requires faster serial throughput while retaining a familiar RS-232 transceiver architecture. Because it is a single-supply device, system designers can avoid a separate negative rail for the RS-232 interface, although external protection and signal-integrity components may still be required in long or electrically noisy installations.

Typical uses include industrial serial adapters, instrumentation control ports, data-acquisition equipment, point-of-sale terminals, embedded service interfaces, and legacy peripheral connectivity. The dual-driver and dual-receiver organization allows one device to support two channels or to provide transmit and receive functions in one compact package. Its 200 kB/s capability is useful for moderate-speed command and control traffic rather than continuous high-throughput file transfer.

PCB layout should keep charge-pump capacitors close to their designated pins, provide an uninterrupted ground reference, and keep the RS-232 driver outputs away from sensitive receiver and logic traces. External protection may be required for exposed cables because RS-232 is an unbalanced interface susceptible to electrostatic discharge and surge events. Confirm the complete pin assignment and recommended external-capacitor values against the manufacturer datasheet before releasing a PCB layout.

This product page combines the ADM232A family architecture, verified distributor identification, package information, practical interface-circuit guidance, and clearly qualified replacement candidates. It is intended to help engineers identify the correct 16-lead SOIC variant and distinguish genuine footprint-compatible options from functional alternatives that require PCB changes.

Alternativas drop-in para ADM232AARWZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADM232AARWZ (mesmo formato e footprint) — diferindo em Package, Product Type, Maximum Data Rate, Number of Receivers, Supply Voltage.

Analog Devices
Package: 16-lead SOIC, surface mount
Product Type: RS-232 line driver and receiver transceiver
Maximum Data Rate: 200 kB/s
Comparar com ADM232AARWZ →
Analog Devices
Package: 16-lead SOIC (SOIC-16)
Supply Voltage: 5 V (single supply)
Comparar com ADM232AARWZ →
Analog Devices
Package: 16-pin SOIC
Product Type: RS-232 line-driver and receiver transceiver
Maximum Data Rate: 120 kbps
Comparar com ADM232AARWZ →
Analog Devices
Package: 24-SOIC
Product Type: RS-232 driver/receiver transceiver
Maximum Data Rate: 120 kB/s
Comparar com ADM232AARWZ →

ADM232AARW

✅ Drop-In ⚠️ Especificações não verificadas
Analog Devices
📦 16-lead SOIC, wide body
RS-232 line driver and receiver transceiver · 2 · 2 · Full duplex · 200 kB/s · 4.5 V to 5.5 V · 5 V · 0.1 µF

Consulte o preço

Ver ficha técnica →

ADM237LJR

✅ Drop-In
Analog Devices
📦 16-lead SOIC, wide body
RS-232 driver/receiver transceiver · 5 · 3 · 5 V · 4.75 V to 5.25 V · 120 kB/s · 9 V · 1 µF

Consulte o preço

Ver ficha técnica →

ADM236LJR-REEL

✅ Drop-In
📦 16-lead SOIC, wide body
Both devices use a 16-pin wide-body SOIC with two RS-232 channels; data-rate, enable, and protection parameters require comparison, with the cited core channel count identical.

📋 Alternativa de referência (fora do catálogo)

ADM232AARWZ Especificações

Product Type Dual RS-232 line driver/receiver transceiver
Number of Transmitters 2
Number of Receivers 2
Interface Standard RS-232
Maximum Transmission Rate 200 kB/s
Tensão de alimentação 5 V
External Charge-Pump Capacitor 0.1 µF
Encapsulamento 16-lead SOIC, wide body
Lead Count 16
Tipo de montagem Surface mount
Supply Configuration Single supply
Transceiver Configuration 2 driver and 2 receiver channels

Guia de Configuração de Pinos do ADM232AARWZ 16-lead soic, wide body

Configuração de pinos para ADM232AARWZ (pacote 16-lead soic, wide body). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-lead soic, wide body para ADM232AARWZ

Nenhum dado detalhado de pinagem disponível para ADM232AARWZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADM232AARWZ é adequado para 6 aplicaçãos: Industrial Serial Control Interfaces, Data Acquisition Instruments, Point-of-Sale Terminals, Embedded Legacy Peripherals, Test and Measurement Equipment, Networking and Service Ports.

🏭

Industrial Serial Control Interfaces

The ADM232AARWZ fits industrial equipment that requires two RS-232 channels for service commands, configuration data, or legacy controller connectivity. Its two drivers and two receivers consolidate four transceiver functions into one 16-lead SOIC, while the 200 kB/s maximum rate accommodates moderate-speed supervisory traffic. Operating from one 5 V rail simplifies the interface power architecture, and the 0.1 µF charge-pump capacitors keep the bill of materials compact. In a deployed controller, the device can connect a host processor UART to two external RS-232 ports. Designers should still assess operating-temperature limits, ESD exposure, and the need for external protection on cables connected outside the enclosure.

📊

Data Acquisition Instruments

The ADM232AARWZ is suitable for laboratory and industrial data-acquisition instruments that exchange setup commands and measurement records over RS-232. A 200 kB/s interface is appropriate for supervisory data and moderate-rate result transfers, especially when the instrument already uses a UART at the host side. The integrated dual driver and dual receiver arrangement can support separate instrument and service channels. Its single-5 V operation allows the interface to share a regulated 5 V rail, but measurement accuracy is not improved by the transceiver itself; analog isolation, grounding, and cable protection must be designed separately for the measurement system.

🖥️

Point-of-Sale Terminals

The ADM232AARWZ can serve as the serial interface in point-of-sale terminals, receipt printers, scanners, and service equipment that still use RS-232. Two transmitters and two receivers provide flexibility for connecting two peripherals or for using one package across multiple point-of-sale variants. The 200 kB/s rate is substantially faster than many legacy printer protocols and is appropriate for transaction data and short status messages. A single 5 V supply simplifies integration with embedded terminal electronics. Check peripheral driver voltage levels and ensure that any cable leaving the enclosure has suitable electrostatic-discharge and surge protection.

🔧

Embedded Legacy Peripherals

The ADM232AARWZ is useful when a modern embedded controller must communicate with an established RS-232 peripheral that has no USB or network interface. Its 200 kB/s throughput supports command exchange and compact file or parameter transfers, while the dual-channel arrangement can reduce the number of interface components in a multi-port design. The 16-lead wide-body SOIC is straightforward to route on conventional through-hole-compatible mixed-technology boards. Firmware should honor the UART baud rate and line-control requirements of the connected peripheral, and the physical interface must preserve signal ground rather than relying only on the RS-232 signal conductors.

📟

Test and Measurement Equipment

The ADM232AARWZ is appropriate for programmable instruments and automated test systems that retain an RS-232 control port. The 200 kB/s rate supports command polling, status reporting, and moderate-size result transfers, while the integrated two-driver and two-receiver configuration can support remote and local serial channels. Its single 5 V operation is convenient for compact bench instruments sharing a regulated supply. Designers should isolate noisy relay contacts and switching power stages from the receiver path, keep the ground reference continuous, and verify the device's operating-temperature and ESD specifications for the intended laboratory or production environment.

🌐

Networking and Service Ports

The ADM232AARWZ can provide console or service connectivity in network appliances, routers, and communications equipment that require an RS-232 management interface. The single-5 V architecture simplifies board-level power design, and the 200 kB/s rate is sufficient for console sessions, configuration transfers, and diagnostic logs. Two transmit and receive channels can support redundant or specialized service connectors when needed. Keep the RS-232 traces away from high-speed Ethernet or switching-regulator nodes, provide a solid signal-ground return, and add external protection if the service connector is accessible to users or connected to external equipment.

What is the ADM232AARWZ?
The ADM232AARWZ is a dual RS-232 interface transceiver from Analog Devices with two line drivers and two receivers. According to the manufacturer product page, the ADM232A family supports transmission rates up to 200 kB/s, operates from a single 5 V supply, and uses small 0.1 µF external charge-pump capacitors. This device is identified in a 16-lead wide-body SOIC package.
What is the maximum data rate of ADM232AARWZ?
The ADM232AARWZ supports RS-232 transmission rates up to 200 kB/s. Analog Devices describes the ADM232, ADM222, and ADM242 products as a family of high-speed RS-232 line drivers and receivers, with the ADM232AARWZ listed specifically as the 200 kB/s, single-5 V version. This rate is appropriate for control, configuration, and moderate-volume serial data.
Does ADM232AARWZ require a negative supply voltage?
The ADM232AARWZ operates from a single 5 V supply and does not require a separate negative power rail for normal operation. Its integrated charge pump generates the bipolar voltage needed by the RS-232 line drivers. The manufacturer identifies small 0.1 µF external capacitors as part of the charge-pump implementation, so correct capacitor placement and values remain important in the PCB layout.
Where can I download the ADM232AARWZ datasheet?
The official ADM232A datasheet and product information are available from the Analog Devices ADM232A product page at https://www.analog.com/en/products/adm232a.html. That page is the appropriate starting point for the manufacturer electrical characteristics, charge-pump capacitor recommendations, complete 16-lead pinout, and package drawings. Use the data for the exact ADM232AARWZ ordering code when assigning pins and layout parameters.
Where is the ADM232AARWZ pinout located?
The complete ADM232AARWZ pinout is shown in the pin-description table and package drawing in the Analog Devices ADM232A datasheet. The device has 16 leads in a wide-body SOIC package. Use that table when assigning driver outputs, receiver inputs, supply pins, ground connections, and charge-pump capacitor pins. Do not infer the pinout solely from a functional-equivalent interface IC, because similarly packaged devices can use different logic or shutdown arrangements.
What is the best drop-in replacement for ADM232AARWZ?
The closest same-family replacement is the ADM232AARW, which is the non-reel ordering form of the ADM232A in the same 16-lead SOIC line, subject to final order-code and package-dimension confirmation. Cross-brand candidates such as ADM237LJR and ADM236LJR-REEL use a 16-pin SOIC format and may provide functional alternatives. Confirm pin-to-pin behavior, enable or shutdown logic, supply limits, and charge-pump requirements before approving any replacement.
Can ADM237LJR replace ADM232AARWZ?
ADM237LJR is a potential functional replacement for the ADM232AARWZ because both are dual RS-232 transceivers in 16-pin SOIC packages. However, the published comparison identifies it as a compatible functional candidate rather than unconditionally pin-to-pin. Before substitution, verify every pin, the driver and receiver logic polarity, maximum data rate, charge-pump capacitor arrangement, and whether the ADM237LJR includes automatic shutdown or other functions that alter the board behavior.
ADM232AARWZ vs ADM236LJR-REEL - which is better?
The ADM232AARWZ and ADM236LJR-REEL are both dual RS-232 transceivers using a 16-pin wide-body SOIC footprint, making the latter a functional substitute in many designs. Selection depends on the exact electrical and control-pin differences rather than package appearance alone. Compare maximum data rate, receiver thresholds, shutdown behavior, supply current, charge-pump requirements, and every assigned pin against the manufacturer datasheets before choosing.
Is ADM232AARWZ suitable for industrial serial equipment?
The ADM232AARWZ is suitable for moderate-speed RS-232 control and data links in industrial equipment when its 200 kB/s rate, single 5 V supply, and dual-channel arrangement match the system requirements. Its operating-temperature limits and ESD qualifications should be checked against the equipment environment. Exposed cable connections may still require external transient-voltage protection because the RS-232 interface itself is not a substitute for surge protection.
When should I choose ADM232AARWZ over another RS-232 transceiver?
Choose the ADM232AARWZ when a design needs two RS-232 drivers and two receivers, a maximum data rate of 200 kB/s, and operation from one 5 V rail in a 16-lead wide-body SOIC. Choose an alternative only when a different control interface, shutdown arrangement, data rate, or protection feature better matches the board. A 16-pin package by itself does not guarantee that two devices are pin-compatible drop-in replacements.
How should the charge-pump capacitors be placed on a PCB?
Place the 0.1 µF charge-pump capacitors close to their designated pins on the ADM232AARWZ and connect the associated ground and supply paths as shown in the manufacturer application information. Keep these high-current charge-pump paths compact and away from sensitive receiver inputs. Maintain a continuous ground reference under the device where practical, and follow the datasheet layout guidance when the series impedance or capacitor type could affect operation.
What can replace ADM232AARWZ?
The ADM232AARW is the most direct same-family replacement candidate because it represents the ADM232A device in the same 16-lead SOIC ordering family, while ADM237LJR and ADM236LJR-REEL are cross-brand 16-pin SOIC functional alternatives. No candidate should be treated as an automatic replacement until its pin map, logic polarity, supply voltage, data rate, shutdown behavior, and external-capacitor requirements have been checked against the ADM232AARWZ datasheet.
Is ADM232AARWZ the same as ADM232AARWZ-REEL?
The ADM232AARWZ and ADM232AARWZ-REEL refer to the same electrical family, but the -REEL suffix identifies a different order format and shipment presentation. The -REEL designation should not be treated as a distinct drop-in alternative because it does not add a different electrical or engineering choice. When checking availability or assembly packaging, confirm the manufacturer ordering information and the quantity shipped per reel.
Where can I buy ADM232AARWZ and check its lead time?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and minimum order quantity for the ADM232AARWZ. The part is identified by distributors as a 16-SOIC, full-RS232, 2-driver/2-receiver device, but inventory and lead time can change by region and order quantity. State the required quantity and assembly packaging in the quote request for the most useful response.
What are the key specifications engineers should know about ADM232AARWZ?
The key ADM232AARWZ specifications are a 200 kB/s maximum data rate, single 5 V operation, two RS-232 transmitters, two receivers, 0.1 µF charge-pump capacitors, and a 16-lead wide-body SOIC package. Analog Devices identifies the part as a pin-compatible high-speed upgrade for the AD232 and ADM232L. Operating temperature, logic thresholds, supply current, and protection ratings must be taken from the exact manufacturer datasheet.

Dados de referência de engenharia para ADM232AARWZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADM232AARWZ when the PCB requires two RS-232 drivers and two receivers, a data rate up to 200 kB/s, and operation from one 5 V rail in a 16-lead wide-body SOIC. The ADM232AARW is the most direct same-family choice when the assembly or ordering format calls for that variant. Consider ADM237LJR when its data rate, shutdown behavior, and pin assignments are verified and provide a useful function beyond the basic dual-transceiver requirement. Consider ADM236LJR-REEL only after checking its complete electrical and control-pin differences. Neither functional alternative should be treated as an automatic drop-in replacement merely because it uses a 16-pin SOIC package. For new designs with requirements outside the ADM232A's 200 kB/s rate or 5 V supply envelope, select a transceiver explicitly specified for those conditions rather than forcing a footprint-based substitution.

Comparação com alternativas

Parâmetro Este produto ADM232AARW ADM237LJR ADM236LJR-REEL
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-lead SOIC, wide body 16-lead SOIC, wide body 16-pin SOIC 16-pin SOIC, wide body
Transmitter Count 2 2 2 2
Receiver Count 2 2 2 2
Interface Type Full RS-232 transceiver Full RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Lead Count 16 16 16 16
Mounting Type Surface mount Surface mount Surface mount Surface mount

Principais diferenciais

  • Two complete RS-232 channels in one interface IC (vs ADM237LJR)
  • Direct same-family ordering path (vs ADM232AARW)
  • Single-supply RS-232 operation (vs ADM236LJR-REEL)

Notas de projeto

Place the 0.1 µF charge-pump capacitors directly beside their assigned pins and use the shortest practical ground and supply connections. These capacitors carry high-frequency charge-pump current, so long loops increase radiated noise and may reduce margin under fast edge conditions. Follow the manufacturer reference layout for capacitor polarity, placement, and the exposed routing of the relevant package.

Keep RS-232 driver outputs away from receiver inputs, UART traces, clocks, and sensitive analog nodes. Maintain a continuous ground reference under and around the device where practical, and route the interface ground as a signal return rather than allowing it to float with the cable. If the connector is exposed to user-accessible or external cabling, evaluate separate surge and electrostatic-discharge protection instead of assuming the internal transceiver provides complete system protection.

Do not approve a substitute solely because it has a 16-pin SOIC package. Compare the pin map, input and output logic polarity, receiver thresholds, maximum data rate, supply range, shutdown or enable behavior, and external-capacitor requirements for the exact replacement ordering code. The ADM237LJR and ADM236LJR-REEL are functional alternatives, but the ADM232AARWZ application must be reviewed against the relevant manufacturer documentation before release.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status requires confirmation from the current manufacturer product documentation or declaration for the exact ordering code.

Buscas relacionadas

ADM232AARWZ ADM232AARWZ datasheet ADM232AARWZ pinout ADM232AARWZ datasheet pdf ADM232AARWZ equivalent ADM232AARWZ replacement ADM232AARWZ cross reference ADM232AARWZ vs ADM237LJR ADM232AARWZ footprint Analog Devices ADM232AARWZ ADM232AARWZ application circuit ADM232AARWZ price ADM232AARWZ stock ADM232A 200 kB/s transceiver ADM232A 16-SOIC interface

Componentes & termos relacionados

Analog Devices ADM232AARWZ ADM232AARW ADM237LJR ADM236LJR-REEL RS-232 RS-232 transceiver line driver line receiver interface IC UART charge pump single-supply operation 200 kB/s 5 V power supply 0.1 µF capacitor 16-lead SOIC wide-body SOIC surface mount industrial serial communication data acquisition point-of-sale terminal test and measurement equipment electrostatic discharge protection
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ