ADM3055EBRWZ-RL7 - 5kV Isolated CAN Transceiver | Analog Devices
N.º da peça: ADM3055EBRWZ-RL7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3.060,00 |
| 1.000 | $5.5 | $5.500,00 |
ADM3055EBRWZ-RL7 Visão geral
A CAN transceiver is a physical layer device that connects a CAN controller to the differential bus lines (CANH and CANL). It converts the digital signals from the controller into differential signals for transmission and vice versa. Isolation in a CAN transceiver provides galvanic isolation between the bus side and the logic side, protecting sensitive electronics from ground loops, voltage spikes, and noise. The ADM3055E integrates the isolation barrier and DC-to-DC converter, eliminating the need for external isolated power supplies.
Key features include 5 kV rms isolation, an integrated isolated DC-to-DC converter, a VIO pin for 1.7 V to 5.5 V logic levels, low maximum loop propagation delay of 150 ns, extended common-mode range of ±25 V, and bus fault protection of ±40 V on CANH and CANL pins. It also supports low power standby with remote wake, making it ideal for power-sensitive nodes.
The ADM3055E uses Analog Devices' isoPower technology, which integrates a DC-to-DC converter with the signal isolation, providing a complete isolated CAN solution in a single package. This reduces board space and component count compared to discrete isolation solutions. The device is designed to meet the stringent requirements of CAN FD, ensuring reliable communication at high data rates.
Typical applications include industrial automation, building automation, motor control, and automotive electronics. The integrated isolation and DC-to-DC converter simplify design and improve reliability in harsh environments. The device is also suitable for battery management systems and other applications requiring isolated CAN communication.
When designing with the ADM3055E, ensure proper PCB layout for the isolation barrier and provide adequate decoupling on the VIO and VCC pins. The integrated DC-to-DC converter requires careful consideration of the external components, such as the transformer and rectifier, to achieve optimal performance.
Alternativas drop-in para ADM3055EBRWZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADM3055EBRWZ-RL7 (mesmo formato e footprint) — diferindo em Bus Fault Protection, Data Rate, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ADM3055EBRIZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADM3055EBRWZ
✅ Drop-In✓ Em estoque
$5.44 / unidade
Ver ficha técnica →ADM3057EBRWZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ISO1042DW
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ISO1044DW
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADM3055EBRWZ-RL7 Especificações
| Isolation Voltage | 5 kV rms |
| Taxa de dados | Up to 12 Mbps (CAN FD) |
| Standard | ISO 11898-2:2016 |
| Supply Voltage (VCC) | 3.3 V to 5 V |
| Logic Supply (VIO) | 1.7 V to 5.5 V |
| Common-Mode Range | ±25 V |
| Bus Fault Protection | ±40 V on CANH and CANL |
| Loop Propagation Delay | 150 ns max |
| Standby Current | Low power standby with remote wake |
| Encapsulamento | 16-lead SOIC-W |
| Temperatura de operação | -40°C to +125°C |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Integrated DC-DC Converter | Yes (isoPower) |
| Number of Channels | 1 |
Configuração de pinos do ADM3055EBRWZ-RL7
| Pino 1 | TXD — Transmit data input |
| Pino 2 | GND1 — Logic side ground |
| Pino 3 | VCC — Logic side supply |
| Pino 4 | RXD — Receive data output |
| Pino 5 | VIO — Logic level supply |
| Pino 6 | GND1 — Logic side ground |
| Pino 7 | STBY — Standby control |
| Pino 8 | GND1 — Logic side ground |
| Pino 9 | CANH — CAN high bus line |
| Pino 10 | CANL — CAN low bus line |
| Pino 11 | GND2 — Bus side ground |
| Pino 12 | GND2 — Bus side ground |
| Pino 13 | VISO — Isolated supply output |
| Pino 14 | VISO — Isolated supply output |
| Pino 15 | GND2 — Bus side ground |
| Pino 16 | GND2 — Bus side ground |
Aplicações típicas
ADM3055EBRWZ-RL7 é adequado para 6 aplicaçãos: Industrial Automation, Automotive Electronics, Building Automation, Motor Control, Battery Management Systems, Medical Equipment.
Industrial Automation
The ADM3055EBRWZ-RL7 provides isolated CAN communication for PLCs, motor drives, and sensor networks. Its 5 kV rms isolation protects against ground loops and voltage transients, while the integrated DC-DC converter simplifies power supply design. The high data rate of 12 Mbps supports fast, reliable communication in industrial environments.
Recomendado
Automotive Electronics
In automotive systems, the ADM3055EBRWZ-RL7 enables isolated CAN communication for battery management, motor control, and vehicle diagnostics. Its wide temperature range (-40°C to +125°C) and ISO 11898-2:2016 compliance ensure reliable operation in harsh conditions. The integrated isolation and DC-DC converter reduce board space and improve system reliability.
Recomendado
Building Automation
The ADM3055EBRWZ-RL7 is used in building automation for HVAC control, lighting systems, and access control. Its 5 kV rms isolation protects against electrical noise and ground potential differences between floors. The low-power standby mode with remote wake reduces energy consumption, making it ideal for always-on systems.
Recomendado
Motor Control
In motor control applications, the ADM3055EBRWZ-RL7 provides isolated CAN communication between the controller and motor drives. The high data rate and low propagation delay ensure real-time control, while the ±40 V bus fault protection guards against voltage spikes. The integrated DC-DC converter simplifies power supply design in distributed motor control systems.
Recomendado
Battery Management Systems
The ADM3055EBRWZ-RL7 is used in battery management systems (BMS) for electric vehicles and energy storage. Its 5 kV rms isolation protects against high voltages and ground loops between battery cells. The wide temperature range and robust bus fault protection ensure reliable communication in demanding environments.
Recomendado
Medical Equipment
In medical equipment, the ADM3055EBRWZ-RL7 provides isolated CAN communication for patient monitoring and diagnostic devices. The 5 kV rms isolation ensures patient safety by preventing electrical shock. The low-power standby mode is beneficial for battery-powered devices, and the high data rate supports real-time data transmission.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADM3055EBRWZ-RL7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADM3055EBRIZ | ADM3055EBRWZ | ADM3057EBRWZ | ISO1042DW | ISO1044DW |
|---|---|---|---|---|---|---|
| Package | 16-lead SOIC-W | 16-lead SOIC-W | 16-lead SOIC-W | 16-lead SOIC-W | 16-lead SOIC-W | 16-lead SOIC-W |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments |
| Isolation Voltage | 5 kV rms | 5 kV rms | 5 kV rms | 3 kV rms | 5 kV rms | 5 kV rms |
| Data Rate | 12 Mbps | 12 Mbps | 12 Mbps | 12 Mbps | 5 Mbps | 5 Mbps |
| Integrated DC-DC | Yes | Yes | Yes | Yes | No | No |
| Common-Mode Range | ±25 V | ±25 V | ±25 V | ±25 V | ±25 V | ±25 V |
| Bus Fault Protection | ±40 V | ±40 V | ±40 V | ±40 V | ±58 V | ±58 V |
| Loop Propagation Delay | 150 ns max | 150 ns max | 150 ns max | 150 ns max | 150 ns max | 150 ns max |
Principais diferenciais
- Integrated isoPower DC-DC converter (vs ISO1042DW)
- Higher data rate (12 Mbps) (vs ISO1042DW)
- 5 kV rms isolation (vs ADM3057EBRWZ)
Notas de projeto
For optimal isolation performance, maintain a clearance of at least 8 mm between the logic side (pins 1-8) and the bus side (pins 9-16) on the PCB. Use a ground plane split under the device to prevent noise coupling. Place decoupling capacitors (0.1 µF and 10 µF) close to VCC and VIO pins.
The integrated DC-DC converter requires an external transformer and rectifier circuit. Refer to the ADM3055E datasheet for the recommended transformer (e.g., Wurth Elektronik 750313771) and output capacitor values. Ensure the transformer is rated for the required isolation voltage (5 kV rms) to maintain safety.
The ADM3055E dissipates power internally due to the integrated DC-DC converter. At maximum data rate and load, the junction temperature can rise significantly. Ensure adequate copper area on the PCB for heat dissipation. The thermal resistance (θJA) is approximately 80°C/W; calculate the junction temperature for your application.
Informações de conformidade
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified; for automotive, verify with manufacturer.
