ADSP-21567BBCZ6 - 600MHz SHARC+ DSP with 1.5MB SRAM | Analog Devices
N.º da peça: ADSP-21567BBCZ6 ✓ AtivoADSP-21567BBCZ6 Visão geral
A digital signal processor is a semiconductor specifically designed to execute mathematical operations in real time. Unlike a general-purpose processor, a DSP is architected around predictable parallel computation and efficient filtering, Fourier analysis, modulation, and waveform processing. Within the product hierarchy, the ADSP-21567 is a SHARC+ DSP, a 64-bit fixed-point and floating-point processor within Analog Devices' digital signal processing family.
The principal features include 1.152 MB of total internal SRAM, configurable 64-bit fixed-point or floating-point arithmetic, DDR memory connectivity, and operation from a 1.00 V core supply with 3.30 V I/O. This combination provides substantial on-chip working memory for filtering, FFT, communications, and control algorithms without requiring continuous external-memory access during each processing pass.
At its 600 MHz device rating, the ADSP-21567BBCZ6 supports intensive parallel signal-processing tasks while retaining the programmability of the SHARC+ architecture. The DDR interface expands available data storage and facilitates DMA-based transfers, while the L1 and L2 memories help keep latency-sensitive loops on the processor. These characteristics are especially useful in systems that must acquire, filter, and transform large volumes of data in real time.
Typical applications include professional audio and audio-visual processing, industrial vibration analysis, communications baseband processing, medical signal analysis, radar and sonar signal chains, and embedded control systems with high sample rates. The integration of DDR support and substantial internal SRAM makes the processor suitable for systems that cannot rely solely on slower external memory for real-time algorithm execution.
Designers should pay close attention to the 400-ball BGA layout, multilayer PCB requirements, exposed thermal management, power sequencing, and high-speed memory routing. The manufacturer's Data Sheet Rev. D contains the authoritative pin assignment, package dimensions, electrical limits, clocking requirements, and memory-interface guidance required for a production design.
This product overview consolidates the manufacturer's key processor, memory, package, and positioning details while adding practical implementation guidance for DDR routing, power delivery, thermal control, and software migration. It is intended to support early architecture selection, PCB planning, and qualification of the ADSP-21567BBCZ6 before final schematic and layout release.
Alternativas drop-in para ADSP-21567BBCZ6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ADSP-21567BBCZ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-21568BBCZ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-21568BBCZ6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-21567BBIZ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-21568BBIZ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-21567BBCZ6 Especificações
| Device Type | Fixed-point and floating-point digital signal processor |
| Processor Family | SHARC+ |
| Target Clock Frequency | 600 MHz |
| Family Maximum Clock Frequency | Up to 800 MHz |
| Architecture Width | 64 bit |
| L1 SRAM | 640 KB |
| Shared L2 SRAM | 512 KB |
| Total Internal SRAM | 1152 KB |
| External Memory Support | DDR |
| Core Supply Voltage | 1.00 V |
| I/O Supply Voltage | 3.30 V |
| Encapsulamento | 400-ball CSP_BGA, 17 x 17 mm |
| Package Type | CSP_BGA |
| Ball Count | 400 balls |
| Package Dimensions | 17 x 17 mm |
| Shipping Format | Tray |
| Data Sheet Revision | Rev. D |
| Lifecycle Recommendation | Recommended for new designs |
| Status RoHS | ROHS3 compliant |
Guia de Configuração de Pinos do ADSP-21567BBCZ6 17 x 17 mm
Configuração de pinos para ADSP-21567BBCZ6 (pacote 17 x 17 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADSP-21567BBCZ6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADSP-21567BBCZ6 é adequado para 6 aplicaçãos: Professional Audio Processing, Industrial Vibration Analysis, Communications Baseband Processing, Medical Signal Analysis, Radar and Sonar Processing, Embedded Control and Conditioning.
Professional Audio Processing
The ADSP-21567BBCZ6 fits professional audio systems requiring predictable real-time filtering, mixing, equalization, and signal transformation. Its 600 MHz SHARC+ processing core and 640 KB of L1 SRAM support computationally intensive loops, while the additional 512 KB of shared L2 provides working space for sample buffers and intermediate results. The processor's 64-bit fixed-point and floating-point capability allows developers to select the arithmetic format suited to each algorithm. DDR connectivity can accept larger audio assets or streaming buffers, but it should be reserved for transfers rather than latency-critical inner loops. The device is particularly useful in networked audio engines, surround-sound processors, dynamic-range controllers, and high-channel-count monitoring equipment where predictable latency and extensive internal memory are more important than a general-purpose processor ecosystem.
Recomendado
Industrial Vibration Analysis
The ADSP-21567BBCZ6 is suitable for industrial vibration-monitoring equipment that must acquire and analyze high-rate accelerometer signals in real time. Its 600 MHz processing rate supports time-domain filtering, frequency-domain transformation, and envelope analysis, while the 1,152 KB of internal SRAM reduces the amount of traffic required for latency-sensitive calculations. DDR support can accommodate long acquisition records or wider sensor banks, with DMA managing transfers between the external memory and processor. This architecture is useful in predictive-maintenance systems, rotating-machine monitors, pumps, motors, and production-line test stations. The design must still account for the BGA package's thermal requirements and the noisy analog environment around the sensors; filtering before the converter and careful power layout help prevent interference with the signal-processing chain.
Recomendado
Communications Baseband Processing
The ADSP-21567BBCZ6 can serve as a configurable baseband processor in communications equipment requiring parallel real-time computation. Its 600 MHz SHARC+ core is applicable to channel filtering, modulation, demodulation, spectral analysis, and data-rate conversion, while 640 KB of L1 SRAM provides closely coupled storage for active algorithm sections. The 512 KB shared L2 and DDR interface allow larger packet or sample buffers to be managed without imposing excessive external-memory traffic during each iteration. The processor is appropriate for radio heads, software-defined radio modules, satellite and microwave equipment, and test systems when deterministic execution and high arithmetic throughput are priorities. DDR timing, impedance control, clock distribution, and power sequencing require careful implementation using the manufacturer's Data Sheet Rev. D guidance.
Recomendado
Medical Signal Analysis
The ADSP-21567BBCZ6 is appropriate for medical monitoring and diagnostic equipment that processes biosignals in real time. A 600 MHz processing core can execute adaptive filters, artifact removal, spectral analysis, and feature-extraction routines within deterministic timing constraints. The combined 1,152 KB of L1 and shared L2 SRAM is valuable for retaining active filter states and short acquisition windows close to the processor, reducing dependence on slower external memory. Potential uses include patient monitoring, hearing-analysis equipment, ultrasound signal chains, and portable diagnostic devices. Because the processor performs the computational role rather than directly acquiring patient signals, the analog front end remains responsible for input protection, antialias filtering, isolation, and safe power sequencing. The BGA package should be placed on a multilayer PCB with thermal vias and validated DDR routing.
Recomendado
Radar and Sonar Processing
The ADSP-21567BBCZ6 fits radar, sonar, and underwater-acoustics systems that perform chain-of-analysis tasks across many channels. Its 600 MHz SHARC+ core supports FFTs, matched filters, beamforming-related calculations, detection functions, and digital down-conversion, while the large internal memory allows active working sets to remain close to the processor. DDR support accommodates captured frames and rolling acquisition buffers, and DMA can reduce processor involvement during bulk transfers. This combination is useful in compact sonar modules, industrial inspection systems, and embedded radar electronics where throughput and deterministic execution are important. System designers must size the external memory for the selected channel count and sample rate, while PCB engineers must preserve DDR timing margins and provide an effective thermal path from the 400-ball package.
Recomendado
Embedded Control and Conditioning
The ADSP-21567BBCZ6 can be used as a high-performance conditioning engine in embedded control systems where sensor data must be filtered or transformed before being passed to another controller. Its 600 MHz execution rate and 1,152 KB of internal SRAM allow multiple signal paths and feedback algorithms to operate without immediately offloading data to external memory. DDR support is useful when a long history, reference table, or multi-channel capture is required. Suitable installations include robotics, test-and-measurement instruments, high-performance industrial controllers, and imaging or display front ends with substantial data preparation. Unlike a general-purpose microcontroller, the SHARC+ architecture provides a more natural environment for parallel real-time mathematics. Firmware and DSP software should be selected only after confirming the exact processor's peripheral set, boot behavior, linker constraints, and DDR requirements.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADSP-21567BBCZ6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADSP-21567BBCZ | ADSP-21568BBCZ | ADSP-21568BBCZ6 | ADSP-21567BBIZ | ADSP-21568BBIZ |
|---|---|---|---|---|---|---|
| Package | 400-ball CSP_BGA, 17 x 17 mm | 400-ball CSP_BGA, 17 x 17 mm | 400-ball CSP_BGA, 17 x 17 mm | 400-ball CSP_BGA, 17 x 17 mm | 400-ball CSP_BGA, 17 x 17 mm | 400-ball CSP_BGA, 17 x 17 mm |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Processor Family | SHARC+ | SHARC+ | SHARC+ | SHARC+ | SHARC+ | SHARC+ |
| External Memory Interface | DDR | DDR | DDR | DDR | DDR | DDR |
Principais diferenciais
- Exact 600 MHz processor rating (vs ADSP-21568BBCZ)
- Documented internal memory configuration (vs ADSP-21568BBCZ6)
- DDR integration for larger data streams (vs ADSP-21567BBIZ)
Notas de projeto
Implement the 400-ball CSP_BGA on a multilayer PCB with the ball assignments, pad stack, solder mask, and land pattern defined by the Analog Devices Data Sheet Rev. D. Preserve short, symmetric escape routes from the ball grid, provide a continuous ground reference beneath signal paths, and place decoupling close to the relevant power balls. The 17 x 17 mm footprint has limited escape space, so stackup, via-in-pad use, and assembly capability should be reviewed before schematic release.
Route the DDR interface as a controlled-impedance topology with matched data and clock propagation, short breakouts, and the layer transitions and via structures specified in the manufacturer's layout guidance. Avoid adding stubs or changing reference planes beneath active DDR traces. Validate write timing, read timing, idle periods, and bus turnaround in simulation before fabrication because external-memory behavior can determine whether the nominal 600 MHz processor design achieves reliable real-time operation.
Provide a low-resistance thermal path through the BGA substrate and PCB rather than treating heat dissipation as a board-level afterthought. Use the manufacturer's thermal layout information, populate the recommended thermal-via pattern, and provide copper area on the opposite side where stackup permits. Validate the worst-case processor activity, ambient temperature, airflow, and board orientation in system tests; a valid DDR layout does not by itself establish acceptable junction temperature.
Separate the 1.00 V core and 3.30 V I/O rails according to the manufacturer's decoupling and power-sequencing requirements. Place the smallest high-frequency capacitors at the associated BGA power balls, then use bulk capacitance near the regulator outputs for longer transients. Confirm startup sequencing, current limits, voltage tolerances, and power-supply loop area with the Data Sheet Rev. D before schematic closure.
Informações de conformidade
The product information identifies the part as ROHS3 compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the available information.