ADUM5404ARWZ-RL7 - Quad-Channel Digital Isolator with isoPower | Analog Devices
N.º da peça: ADUM5404ARWZ-RL7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.58 | $75,80 |
| 100 | $6.74 | $674,00 |
| 500 | $5.9 | $2.950,00 |
| 1.000 | $5.4 | $5.400,00 |
ADUM5404ARWZ-RL7 Visão geral
Digital isolators are components that transfer digital signals across an isolation barrier, protecting sensitive circuitry from high voltages, ground loops, and noise. They replace optocouplers in many applications, offering higher speed, better reliability, and integrated power conversion. The ADUM5404 belongs to the ADuM540x family, which combines signal isolation and isolated power in a single package, simplifying board design and reducing component count.
Key features include four bidirectional isolation channels, an integrated DC-to-DC converter with 500 mW output, 2500 Vrms isolation rating, 25 kV/µs CMTI, and 1 Mbps data rate. The device also features thermal shutdown protection and operates over the industrial temperature range of -40°C to +105°C. Its wide-body SOIC package ensures adequate creepage and clearance for high-voltage isolation.
Technically, the ADUM5404 uses Analog Devices' iCoupler technology, which employs chip-scale transformers for isolation, providing superior performance compared to optocouplers in terms of speed, power consumption, and reliability. The integrated isoPower converter uses a push-pull architecture to generate an isolated output, eliminating the need for a separate isolated power supply. This integration reduces board space and design complexity.
Typical applications include industrial fieldbus isolation, isolated SPI/UART interfaces, motor control, and power supply monitoring. The device is ideal for systems requiring both signal and power isolation, such as PLCs, motor drives, and medical equipment. Its 500 mW output can power small isolated circuits, such as sensors or transceivers.
When designing with the ADUM5404, ensure proper PCB layout with adequate isolation spacing and decoupling capacitors on both sides of the isolation barrier. The integrated DC-to-DC converter requires careful attention to load regulation and ripple, especially when powering sensitive analog circuits.
Alternativas drop-in para ADUM5404ARWZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADUM5404ARWZ-RL7 (mesmo formato e footprint) — diferindo em Package, Input Supply Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ADUM5404CRWZ-RL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADUM5404BRWZ-RL7
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADUM5404ARWZ
✅ Drop-In✓ Em estoque
$5.49 / unidade
Ver ficha técnica →ADUM5401ARWZ
✅ Drop-In✓ Em estoque
$5.5 / unidade
Ver ficha técnica →ISO7340CQDWQ1
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADUM5404ARWZ-RL7 Especificações
| Number of Channels | 4 |
| Isolation Voltage | 2500 Vrms |
| Taxa de dados | 1 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Integrated DC-to-DC Converter Output Power | 500 mW |
| Supply Voltage Range | 3 V to 5.5 V |
| Operating Supply Current | 19 mA (typical) |
| Encapsulamento | 16-SOIC (0.295", 7.50mm Width) |
| Faixa de temperatura de operação | -40°C to +105°C |
| Isolation Rating | 2500 Vrms |
| Status RoHS | Compliant |
| Tipo de montagem | Surface Mount |
| Technology | iCoupler |
Configuração de pinos do ADUM5404ARWZ-RL7
| Pino 1 | VDD1 — Primary side supply voltage |
| Pino 2 | GND1 — Primary side ground |
| Pino 3 | VIA — Input channel A |
| Pino 4 | VOA — Output channel A |
| Pino 5 | VIB — Input channel B |
| Pino 6 | VOB — Output channel B |
| Pino 7 | VIC — Input channel C |
| Pino 8 | VOC — Output channel C |
| Pino 9 | VID — Input channel D |
| Pino 10 | VOD — Output channel D |
| Pino 11 | GND2 — Secondary side ground |
| Pino 12 | VDD2 — Secondary side supply voltage |
| Pino 13 | VISO — Isolated output voltage from DC-to-DC converter |
| Pino 14 | GNDISO — Isolated ground for DC-to-DC converter |
| Pino 15 | NC — No connect |
| Pino 16 | NC — No connect |
Aplicações típicas
ADUM5404ARWZ-RL7 é adequado para 6 aplicaçãos: Industrial Fieldbus Isolation, Isolated SPI/UART Interface, Motor Control, Power Supply Monitoring, Medical Equipment Isolation, Isolated Sensor Interface.
Industrial Fieldbus Isolation
The ADUM5404ARWZ-RL7 provides isolated power and signal for fieldbus interfaces like RS-485, ensuring robust communication in noisy industrial environments. Its 2500 Vrms isolation and 25 kV/µs CMTI protect against ground loops and transients, while the integrated DC-to-DC converter powers the transceiver without an external supply. This simplifies design and reduces board space, making it ideal for PLCs and industrial controllers.
Recomendado
Isolated SPI/UART Interface
For isolated SPI or UART communication between microcontrollers and peripherals, the ADUM5404ARWZ-RL7 offers four channels, sufficient for SPI (SCLK, MOSI, MISO, CS) or UART (TX, RX, CTS, RTS). Its 1 Mbps data rate supports moderate-speed communication, and the integrated power eliminates the need for a separate isolated supply. This is ideal for isolated sensor interfaces and data acquisition systems.
Recomendado
Motor Control
In motor control systems, the ADUM5404ARWZ-RL7 isolates gate drive signals and feedback from the high-voltage power stage. Its 25 kV/µs CMTI ensures reliable operation in the presence of fast-switching transients, and the integrated DC-to-DC converter can power the gate driver or current sensors. The 500 mW output is sufficient for low-power gate drivers, reducing component count and improving reliability.
Recomendado
Power Supply Monitoring
The ADUM5404ARWZ-RL7 is used to isolate monitoring signals from high-voltage power supplies, such as voltage and current feedback. Its integrated power can supply the monitoring IC, eliminating the need for an isolated bias supply. The 2500 Vrms isolation protects low-voltage control circuitry from power supply transients, making it suitable for server power supplies and industrial converters.
Recomendado
Medical Equipment Isolation
For medical devices requiring patient isolation, the ADUM5404ARWZ-RL7 provides 2500 Vrms isolation, meeting safety standards. Its low power consumption and integrated DC-to-DC converter make it suitable for battery-powered devices. The device isolates control signals and power for sensors, ensuring patient safety and reliable operation in applications like patient monitors and diagnostic equipment.
Recomendado
Isolated Sensor Interface
The ADUM5404ARWZ-RL7 is ideal for isolating sensor signals in harsh environments, such as temperature or pressure sensors in industrial settings. Its four channels can carry sensor data and control signals, while the integrated power supplies the sensor or signal conditioning circuit. The 1 Mbps data rate is sufficient for most sensor applications, and the isolation protects the microcontroller from electrical noise.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADUM5404ARWZ-RL7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADUM5404CRWZ-RL | ADUM5404BRWZ-RL7 | ADUM5404ARWZ | ADUM5401ARWZ | ISO7340CQDWQ1 |
|---|---|---|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Number of Channels | 4 | 4 | 4 | 4 | 2 | 4 |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 3000 Vrms |
| Data Rate | 1 Mbps | 1 Mbps | 25 Mbps | 1 Mbps | 1 Mbps | 25 Mbps |
| Integrated DC-to-DC Converter | Yes (500 mW) | Yes (500 mW) | Yes (500 mW) | Yes (500 mW) | No | No |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 100 kV/µs |
Principais diferenciais
- Integrated DC-to-DC converter (vs ISO7340CQDWQ1)
- Lower operating supply current (vs ADUM5404CRWZ-RL)
- Four channels with power (vs ADUM5401ARWZ)
Notas de projeto
For the ADUM5404ARWZ-RL7, maintain proper isolation spacing on the PCB. Ensure a minimum creepage distance of 8 mm for 2500 Vrms isolation, and place a slot or barrier under the device to prevent surface leakage. Use 10 µF and 0.1 µF decoupling capacitors on both VDD1 and VDD2, placed as close as possible to the pins.
The integrated DC-to-DC converter provides up to 500 mW. When loading the isolated output, consider the efficiency and ripple. Use a 10 µF capacitor on VISO to stabilize the output. For higher loads, ensure the input supply can handle the increased current draw.
The ADUM5404ARWZ-RL7 dissipates power internally, especially when the DC-to-DC converter is loaded. At maximum load, the power dissipation can be significant. Ensure adequate copper area on the PCB for heat sinking, and consider the operating temperature range of -40°C to +105°C.
Informações de conformidade
RoHS compliant per distributor data. AEC-Q100 not applicable for this industrial-grade device.