Analog Devices

ADV7282AWBCPZ-M - 10-Bit Video Decoder | Analog Devices

N.º da peça: ADV7282AWBCPZ-M ✓ Ativo
32-lead LFCSP, 5 mm x 5 mm Package
MOQ: 1 |

ADV7282AWBCPZ-M Visão geral

The Analog Devices ADV7282AWBCPZ-M is a 10-bit, 4-times-oversampled SDTV video decoder with six analog inputs, three general-purpose outputs, differential-input support, and an I2C-compatible control interface. The device is packaged in a 32-lead LFCSP measuring 5 mm by 5 mm. According to the Analog Devices product page, it converts supported analog baseband video signals into an 8-bit YCrCb 4:2:2 data stream for transmission through a MIPI CSI-2 interface.

A video decoder is an interface IC within the broader video-processing hierarchy. Its function is to digitize analog composite or component video, recover timing and chrominance information, and present structured digital pixel data to a host processor, image processor, display controller, or recording system. The ADV7282-M family supports single-ended, pseudo-differential, and fully differential analog input arrangements, providing flexibility when routing camera or video-converter outputs into an embedded system.

Key features include 10-bit video resolution, four-times oversampling, six analog video inputs, three general-purpose outputs, and serial configuration through a 2-wire bidirectional interface compatible with I2C. The decoder uses a 1.8 V CMOS process. Its six-input architecture reduces the need for separate decoder devices when several camera channels, auxiliary video sources, or composite-video signals must be monitored through one host interface.

Technical operation combines analog-to-digital conversion with decoding of standard analog baseband video formats. Oversampling increases the density of samples used during the conversion process, while YCrCb 4:2:2 output separates luminance from chroma and reduces the data rate required to transport video. The MIPI CSI-2 output provides a standardized connection to compatible processors and embedded vision platforms.

Typical applications include automotive infotainment and surround-view systems, industrial machine vision, consumer navigation equipment, security cameras, medical imaging interfaces, and embedded displays. Differential inputs are especially useful when the source has a differential video architecture and the PCB must minimize noise coupling. The compact 32-lead LFCSP also supports space-constrained camera and display designs.

Layout should preserve controlled-impedance routing for MIPI lanes, keep analog inputs away from switching nodes, and follow the Analog Devices reference-layout and decoupling guidance. Pay particular attention to exposed-pad thermal management, analog and digital return paths, and the input network selected for each video source. Confirm the exact input standard, synchronization method, timing, pin assignments, and system power sequence before releasing the PCB.

This page organizes the device function, verified electrical facts, application guidance, package constraints, and directly related family options into an engineering-focused selection resource. It also distinguishes confirmed drop-in options from related variants so that footprint, software, ordering-code, and temperature-grade differences are considered before PCB reuse.

Alternativas drop-in para ADV7282AWBCPZ-M — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADV7282AWBCPZ-M (mesmo formato e footprint) — diferindo em Oversampling, Process Technology, Product Type.

Analog Devices
Oversampling: 4x
Process Technology: 1.8 V CMOS
Product Type: 10-bit multiformat SDTV video decoder with deinterlacer
Comparar com ADV7282AWBCPZ-M →

ADV7282AWBCPZ

✅ Drop-In
📦 32-LFCSP (5x5)
Same 32-LFCSP decoder family, but the exact -M grade, qualification, and ordering suffix must be reconciled before substitution; no verified numerical parameter delta is stated.

📋 Alternativa de referência (fora do catálogo)

ADV7282AWBCPZ-M-RL

✅ Drop-In
📦 32-LFCSP (5x5)
Same 10-bit, 4-times-oversampled decoder and 32-LFCSP package; the RL suffix changes the reeled ordering option rather than the core decoder parameters.

📋 Alternativa de referência (fora do catálogo)

ADV7282AWBCPZ-M Especificações

Product Type 10-bit SDTV video decoder
Video Resolution 10 bit
Oversampling 4 times
Analog Input Count 6 inputs
General-Purpose Output Count 3 outputs
Supported Analog Input Modes Single-ended, pseudo-differential, and fully differential
Digital Output Format 8-bit YCrCb 4:2:2
Host Interface I2C-compatible 2-wire serial bidirectional interface
Video Output Interface MIPI CSI-2
Process Technology 1.8 V CMOS process
Encapsulamento 32-lead LFCSP, 5 mm x 5 mm
Tipo de montagem Surface mount
Exposed Pad Present, 32-lead LFCSP configuration
Status RoHS Unknown
REACH Status Unknown

Guia de Configuração de Pinos do ADV7282AWBCPZ-M 32-lead lfcsp, 5 mm x 5 mm

Configuração de pinos para ADV7282AWBCPZ-M (pacote 32-lead lfcsp, 5 mm x 5 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 32-lead lfcsp, 5 mm x 5 mm para ADV7282AWBCPZ-M

Nenhum dado detalhado de pinagem disponível para ADV7282AWBCPZ-M.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADV7282AWBCPZ-M é adequado para 6 aplicaçãos: Automotive Surround-View Camera System, Industrial Machine-Vision Controller, Security Camera Video Interface, Automotive Infotainment Display, Medical Imaging Equipment, Navigation and Embedded Display System.

🚗

Automotive Surround-View Camera System

The ADV7282AWBCPZ-M fits centralized automotive surround-view designs that must capture several camera channels and deliver them to a vehicle domain controller. Its six analog inputs reduce the number of decoder packages needed for a multi-camera arrangement, while support for fully differential inputs can simplify connection to compatible camera serializers. The 4-times-oversampled, 10-bit decoding path supports the Analog Devices description of an SDTV video decoder, and MIPI CSI-2 output provides a compact digital transport to a host processor. Before production release, confirm the exact ordering code's automotive qualification, temperature range, input synchronization method, and diagnostic requirements.

🏭

Industrial Machine-Vision Controller

The ADV7282AWBCPZ-M is useful in industrial machine-vision controllers that aggregate multiple analog camera or inspection-video channels. Six analog inputs allow one decoder to handle more signal sources than a single-channel device, while differential-input support can improve noise immunity in factory environments containing motor drives and switching equipment. The decoder's 8-bit YCrCb 4:2:2 MIPI CSI-2 output connects to compatible edge-computing or image-processing hardware. Design the analog input network for each camera standard, isolate high-current power paths from the decoder, and validate synchronization and timing under the worst-case cable and grounding conditions.

📹

Security Camera Video Interface

The ADV7282AWBCPZ-M can serve as the analog-video front end of a security camera or surveillance controller when several legacy composite-video sources must feed a digital processor. Its six analog inputs allow camera selection or monitoring without requiring six separate decoder packages, and the 4-times-oversampled 10-bit architecture provides a defined decoding path for compatible SDTV sources. The MIPI CSI-2 output carries 8-bit YCrCb 4:2:2 data to the host. The design must account for cable attenuation, sync polarity, chroma filtering, ESD protection, and the exact supported video format before the component is considered a universal camera-interface solution.

📺

Automotive Infotainment Display

The ADV7282AWBCPZ-M suits infotainment platforms that must ingest external or camera-generated analog baseband video before display processing. A single 32-lead LFCSP can decode up to six analog channels, reducing routing complexity when the system accepts auxiliary camera, navigation, or external-display sources. Its YCrCb 4:2:2 MIPI CSI-2 output gives the host a standardized digital-video path, while configurable serial control supports integration with an embedded system. For an automotive design, verify temperature and qualification requirements for the exact -M ordering code, synchronize source timing correctly, and isolate the analog section from display back-converter noise.

💊

Medical Imaging Equipment

The ADV7282AWBCPZ-M may be evaluated for medical equipment that receives supported analog baseband video from an imaging module, endoscopy interface, or legacy diagnostic subsystem. Six inputs provide flexibility for connecting more than one source, and differential signaling can help preserve signal integrity in equipment containing high-gain analog and switching circuitry. The decoder produces an 8-bit YCrCb 4:2:2 stream over MIPI CSI-2 for a suitable processor or display controller. Medical applications require a system-specific risk assessment, validated isolation strategy, exact video-format confirmation, and verification that the selected component's environmental and quality requirements meet the intended standard.

🧭

Navigation and Embedded Display System

The ADV7282AWBCPZ-M fits navigation and embedded-display products that combine external analog video with a host processor or flat-panel display controller. Its six-channel input capability is useful for auxiliary camera, external-source, and diagnostic-video designs, while the compact 5 mm by 5 mm LFCSP conserves board area. The 10-bit, four-times-oversampled decoder creates an 8-bit YCrCb 4:2:2 stream for MIPI CSI-2 transport, avoiding a parallel-video routing requirement at the host. Designers should use short, controlled-impedance digital routes, maintain return continuity under the exposed pad, and confirm that the decoder's timing and chroma characteristics suit the display pipeline.

What is the ADV7282AWBCPZ-M?
The ADV7282AWBCPZ-M is a 10-bit, 4-times-oversampled SDTV video decoder from Analog Devices. According to the Analog Devices product page, it accepts six analog video inputs, provides three general-purpose outputs, and converts supported analog baseband signals into an 8-bit YCrCb 4:2:2 stream delivered through a MIPI CSI-2 interface. The device uses a 32-lead, 5 mm by 5 mm LFCSP package and is controlled through an I2C-compatible serial interface.
How many analog video inputs does ADV7282AWBCPZ-M have?
The ADV7282AWBCPZ-M has six analog video inputs and three general-purpose outputs. Analog Devices states that the input stage accepts single-ended, pseudo-differential, and fully differential signals, giving a system designer flexibility in how camera or video-converter outputs are connected. These six channels can be useful in surround-view, multi-camera monitoring, industrial vision, and navigation systems where several video sources must be routed into one host processor.
What output format does ADV7282AWBCPZ-M use?
The ADV7282AWBCPZ-M outputs an 8-bit YCrCb 4:2:2 video stream through its MIPI CSI-2 interface. According to the Analog Devices ADV7282 product page, the decoder separates luminance and chrominance information while reducing the transmitted chroma data rate. The resulting digital stream can be passed to a compatible MIPI CSI-2 receiver, embedded image processor, display controller, or video recording subsystem.
What is the resolution and oversampling of ADV7282AWBCPZ-M?
The ADV7282AWBCPZ-M provides a 10-bit decoding path with four-times oversampling. The Analog Devices product page identifies the device as a 10-bit, 4-times-oversampled SDTV video decoder. These figures describe its video conversion and sampling architecture; the resulting host-facing stream is identified as 8-bit YCrCb 4:2:2. Confirm the supported video standard and active-pixel timing against the manufacturer data sheet for the intended source.
Does ADV7282AWBCPZ-M support differential video inputs?
Yes. The ADV7282AWBCPZ-M supports single-ended, pseudo-differential, and fully differential analog video inputs. Analog Devices identifies these input modes on the ADV7282-M family product page. Differential routing can reduce susceptibility to common-mode interference, particularly in automotive and industrial systems, but the source impedance, termination network, input coupling method, and synchronization requirement must match the selected video standard and the recommended application circuit.
How is ADV7282AWBCPZ-M configured by the host processor?
The ADV7282AWBCPZ-M is programmed through a 2-wire, serial, bidirectional interface that is compatible with I2C. According to the Analog Devices ADV7282 product page, this control path is used to configure and manage the decoder. Designers should assign unique addresses where multiple decoders share a bus, keep the I2C routing away from sensitive analog traces, and verify register initialization, timing, and power sequencing in the manufacturer's recommended startup sequence.
Where can I download the ADV7282AWBCPZ-M datasheet PDF?
The official Analog Devices ADV7282 product page is the appropriate starting point for the ADV7282AWBCPZ-M data sheet and supporting documentation. It describes the ADV7282-M family, including six analog inputs, three general-purpose outputs, 1.8 V CMOS fabrication, and MIPI CSI-2 output. Use the document-selection section on that page to locate the exact ordering-code PDF, pin descriptions, electrical characteristics, register information, and application guidance corresponding to ADV7282AWBCPZ-M.
Where can I find the ADV7282AWBCPZ-M pinout and package information?
The ADV7282AWBCPZ-M pinout is documented in the official Analog Devices ADV7282 data sheet and product documentation. The package is a 32-lead LFCSP measuring 5 mm by 5 mm, with an exposed thermal pad. Because the exact library illustration is not represented here, use the pin-description table and land-pattern drawing in the manufacturer documentation when assigning PCB tracks, connecting the exposed pad, and checking the exposed-pad net.
What is the difference between ADV7282AWBCPZ-M and ADV7282AWBCPZ-M-RL?
The ADV7282AWBCPZ-M and ADV7282AWBCPZ-M-RL identify the same decoder family in different ordering formats, with the RL suffix distinguishing the reeled ordering option. The product listing for ADV7282AWBCPZ-M-RL describes the same 10-bit, 4-times-oversampled decoder with differential inputs and a 32-lead LFCSP. Treat the RL code as a packaging and orderable-variant distinction, and confirm reel orientation, quantity, and the exact marking scheme before substitution.
Can ADV7282AWBCPZ-M replace ADV7282AWBCPZ?
The ADV7282AWBCPZ-M should be considered against ADV7282AWBCPZ as an ordering-code and grade review before using it as a replacement. A related-family listing confirms that both names belong to the 32-lead LFCSP ADV7282 decoder family, but replacement also requires checking temperature grade, automotive qualification, exposed-pad requirements, firmware or register compatibility, and the exact ordering suffix. For a production redesign, compare the manufacturer data sheet and approved-part documentation for both devices.
When should I choose ADV7282AWBCPZ-M over a simpler video decoder?
Choose the ADV7282AWBCPZ-M when the design must consolidate multiple analog video sources, support differential signaling, and deliver standardized YCrCb data through MIPI CSI-2. Its six analog inputs and three general-purpose outputs provide more channel flexibility than a single-input decoder. A simpler device may be preferable when only one composite-video channel is required, less routing flexibility is needed, or the host already has a dedicated parallel or MIPI video front end.
Is ADV7282AWBCPZ-M suitable for automotive surround-view systems?
The ADV7282AWBCPZ-M is suitable for evaluating in automotive surround-view and multi-camera designs because it accepts six analog video inputs and supports fully differential input configurations. Its 10-bit decoding, four-times oversampling, and MIPI CSI-2 output suit centralized vehicle camera architectures. Production automotive use also requires confirmation of the selected ordering code's temperature range, AEC-Q100 qualification, automotive-grade requirements, and lifetime-status commitments for the exact part number.
What can replace ADV7282AWBCPZ-M?
ADV7282AWBCPZ-M-RL is the closest confirmed ordering alternative because it retains the 10-bit, 4-times-oversampled decoder description and 32-lead LFCSP format while changing the reeled ordering suffix. It is not a functionally different decoder, but package orientation and sourcing form differ. Do not treat ADV7282A or ADV7280 as automatic drop-in replacements without a separate pin, register, timing, and functional-equivalence review, because interface architecture and video capabilities may differ.
Is ADV7282AWBCPZ-M the same as ADV7282A-M?
The ADV7282AWBCPZ-M and ADV7282A-M are related Analog Devices decoder products, but they should not automatically be treated as identical. Analog Devices states that the ADV7282A-M MIPI model has the same pinout as and is software compatible with the ADV7282-M, while also noting that features and specifications are shared unless otherwise stated. Review ordering codes, package drawings, temperature grades, and device-specific limitations before using one in place of the other.
Where can I buy ADV7282AWBCPZ-M and what is its lead time?
Use the Request a Quote form on this page to request ADV7282AWBCPZ-M availability, current commercial terms, and a lead-time commitment for the required quantity. The component is an active Analog Devices video-decoder product offered in a 32-lead LFCSP configuration. The quote request should identify the exact MPN, target quantity, delivery location, and whether reels, trays, or another shipping format are required so that the manufacturing and logistics response reflects the requested configuration.
What are the key specifications of ADV7282AWBCPZ-M that engineers should know?
The key specifications are 10-bit decoding, four-times oversampling, six analog inputs, three general-purpose outputs, and an 8-bit YCrCb 4:2:2 output through MIPI CSI-2. The Analog Devices product page also identifies I2C-compatible configuration and a 1.8 V CMOS process. Physical implementation uses a 32-lead, 5 mm by 5 mm LFCSP with an exposed pad, making analog routing, controlled-impedance MIPI layout, decoupling, and thermal management central to a reliable design.

Dados de referência de engenharia para ADV7282AWBCPZ-M — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose ADV7282AWBCPZ-M when the design needs a six-channel, 10-bit, four-times-oversampled SDTV decoder with single-ended, pseudo-differential, or fully differential inputs and a MIPI CSI-2 output. Select ADV7282AWBCPZ-M-RL when the same electrical configuration is required but reeled procurement is preferred; verify reel orientation and quantity before layout approval. Use ADV7282AWBCPZ only after confirming the precise grade, qualification, temperature, and ordering-code differences against the current manufacturer documentation. Related ADV7282A and ADV7280 devices should not be treated as automatic replacements merely because they are video decoders: interface type, pinout, register compatibility, supported formats, and performance can differ. For a new six-channel design, the -M ordering family is the clearest choice once electrical and qualification requirements are reconciled against the exact data sheet.

Comparação com alternativas

Parâmetro Este produto ADV7282AWBCPZ ADV7282AWBCPZ-M-RL
Brand Analog Devices Analog Devices Analog Devices
Package 32-LFCSP (5x5) 32-LFCSP (5x5) 32-LFCSP (5x5)
Video Resolution 10 bit 10 bit 10 bit
Oversampling 4 times 4 times 4 times
Analog Input Count 6 inputs 6 inputs 6 inputs
General-Purpose Output Count 3 outputs 3 outputs 3 outputs
Digital Video Output 8-bit YCrCb 4:2:2 over MIPI CSI-2 8-bit YCrCb 4:2:2 over MIPI CSI-2 8-bit YCrCb 4:2:2 over MIPI CSI-2
Control Interface I2C-compatible 2-wire serial bidirectional interface I2C-compatible 2-wire serial bidirectional interface I2C-compatible 2-wire serial bidirectional interface
Input Signal Support Single-ended, pseudo-differential, and fully differential Differential-input decoder family Single-ended, pseudo-differential, and fully differential
Ordering Format ADV7282AWBCPZ-M ADV7282AWBCPZ without -M suffix ADV7282AWBCPZ-M with RL reeled ordering suffix

Principais diferenciais

  • Six analog inputs in one decoder package (vs ADV7282AWBCPZ-M-RL)
  • Four-times-oversampled 10-bit decoding architecture (vs ADV7282AWBCPZ)
  • Multiple analog input coupling modes (vs ADV7282AWBCPZ-M-RL)

Notas de projeto

Route MIPI CSI-2 clocks and data as controlled-impedance, tightly coupled traces with a continuous reference plane and no unnecessary stubs. Match the differential pair geometry to the host interface requirements and keep the decoder-side digital return path continuous beneath the exposed-pad region. Avoid crossing analog inputs with high-speed digital or switching-supply nodes. A four-times-oversampled 10-bit decoder can capture timing errors, so PCB routing and power integrity remain part of the signal-integrity design rather than only a layout detail.

Use the Analog Devices reference layout as the basis for component placement, decoupling, grounding, and exposed-pad connection. Place supply and ground connections close to their relevant pins, connect the exposed pad through a thermal-via array, and maintain the recommended copper area. Analog inputs should use short paths with symmetric geometry where differential operation is required. Do not route video inputs directly beneath noisy regulators, display power converters, or high-speed switching-node copper.

Do not assume that every member of the ADV7282 family is automatically interchangeable. The ADV7282A-M has documented pin and software compatibility with the ADV7282-M, but features and specifications may still contain exceptions, while ADV7280 is a different decoder generation. Before substitution, compare the exact ordering suffix, package drawing, input standard, synchronization behavior, power rails, register map, timing, qualification, and exposed-pad connection. Also verify whether the required physical shipping format is tray or reel.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations for the exact ADV7282AWBCPZ-M ordering code were not present in the manufacturer material referenced for this record. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status using the current Analog Devices product documentation and the supplier's declaration.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADV7282AWBCPZ-M ADV7282AWBCPZ-M datasheet ADV7282AWBCPZ-M datasheet pdf ADV7282AWBCPZ-M pinout ADV7282AWBCPZ-M equivalent ADV7282AWBCPZ-M replacement ADV7282AWBCPZ-M vs ADV7282AWBCPZ Analog Devices ADV7282AWBCPZ-M ADV7282AWBCPZ-M 32-LFCSP ADV7282AWBCPZ-M MIPI CSI-2 ADV7282AWBCPZ-M automotive ADV7282AWBCPZ-M price ADV7282AWBCPZ-M stock 32-LFCSP 10-bit video decoder

Componentes & termos relacionados

Analog Devices ADV7282AWBCPZ-M ADV7282AWBCPZ ADV7282AWBCPZ-M-RL ADV7282A-M ADV7280 video decoder video interface IC SDTV decoder analog video decoder digital video decoder MIPI CSI-2 YCrCb 4:2:2 10-bit resolution four-times oversampling I2C-compatible serial interface differential video input pseudo-differential video input 32-lead LFCSP QFN family surface-mount package automotive surround view industrial machine vision security camera interface 1.8 V CMOS process
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ