ADV7282WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices
N.º da peça: ADV7282WBCPZ-RL ✗ Fim de vidaADV7282WBCPZ-RL Visão geral
A video decoder is an interface IC that reconstructs digital pixel and timing information from an analog video signal. In the product hierarchy, the ADV7282 belongs to the video-interface family within interface ICs. It samples an incoming composite or component signal at four times the base video rate, performs the required decoding and deinterlacing functions, and presents a standardized digital video stream to a host processor, image pipeline, or display controller.
Key features include 10-bit video digitization, 4× oversampling, differential inputs, integrated deinterlacer functionality, and an ITU-R BT.656 parallel output. The decoder provides eight video data outputs, P0 through P7, together with a line-locked clock output for synchronization with downstream digital-video circuitry. Configuration is performed through a bidirectional two-wire serial port compatible with I2C, allowing a host controller to adjust operating parameters without external programming devices.
The ADV7282 is fabricated in a 1.8 V CMOS process and operates from a 2.8 V to 3.1 V analog supply and a 1.62 V to 1.8 V digital supply, depending on the specific device configuration. Its 32-LFCSP construction reduces board area compared with larger leaded packages while retaining the exposed thermal pad and ground-oriented land pattern used in space-constrained portable equipment. Analog Devices identifies the ADV7282 family as not recommended for new designs, so lifecycle planning should account for the device's mature platform status.
Typical uses include SDTV video capture, camera and surveillance signal conditioning, portable media equipment, industrial video panels, and embedded display systems. Differential analog inputs are particularly useful when the source uses a balanced or noise-sensitive video connection, while the deinterlacer supports conversion of interlaced source material into digital frames for downstream processing. The 5 mm × 5 mm footprint also benefits compact portable products where connector and processor placement constrain the available board area.
For new designs, evaluate the input bandwidth, synchronization, and deinterlacing requirements against the complete ADV7282 signal-chain requirements. Keep analog and digital return paths appropriately separated, follow the manufacturer's recommended decoupling and exposed-pad layout, and treat the I2C configuration address and register defaults as part of the firmware contract. Because the family is not recommended for new designs, confirm availability and product-change status before committing a production platform.
This page combines the manufacturer's functional description with practical placement, interface, lifecycle, and drop-in comparison guidance. It highlights the relationship between the standard, mobile-oriented, and automotive-related ADV7282 variants while keeping package, interface, and lifecycle differences visible for engineering review.
Alternativas drop-in para ADV7282WBCPZ-RL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ADV7282A
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADV7282WBCPZ-M-RL
✅ Drop-InConsulte o preço
Ver ficha técnica →ADV7282AWBCPZ-M-RL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADV7282WBCPZ-RL Especificações
| Video Decoder Resolution | 10 bit |
| Oversampling Rate | 4× |
| Input Type | Differential analog video inputs |
| Video Standard | ITU-R BT.656 |
| Digital Video Outputs | 8 outputs, P0 to P7 |
| Synchronization Output | Line-locked clock (LLC) |
| Control Interface | I2C-compatible two-wire serial bidirectional port |
| Process Technology | 1.8 V CMOS |
| Analog Supply Voltage | 2.8 V to 3.1 V |
| Digital Supply Voltage | 1.62 V to 1.8 V |
| Deinterlacing | Integrated deinterlacer |
| Encapsulamento | 32-lead LFCSP (5 mm × 5 mm) |
| Tipo de montagem | Surface mount |
| Temperatura de operação | -40°C to +105°C |
| Automotive Qualification | AEC-Q100 |
| Status do ciclo de vida | Not recommended for new designs |
| Exposed Thermal Pad | Present |
Guia de Configuração de Pinos do ADV7282WBCPZ-RL 32-lead lfcsp (5 mm × 5 mm)
Configuração de pinos para ADV7282WBCPZ-RL (pacote 32-lead lfcsp (5 mm × 5 mm)). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADV7282WBCPZ-RL.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADV7282WBCPZ-RL é adequado para 6 aplicaçãos: SDTV Video Capture, Industrial Inspection Camera, Security Camera Interface, Portable Media Player, Video Test and Measurement, Automotive Display Interface.
SDTV Video Capture
The ADV7282WBCPZ-RL fits an SDTV capture front end that must convert differential analog video into a deterministic digital stream. Its 10-bit conversion and 4× oversampling provide the sampling headroom required by the Analog Devices decoder architecture, while ITU-R BT.656 output reduces the host-interface burden. The eight P0-to-P7 data lines and line-locked clock can feed a video processor or frame buffer through controlled impedance routing. Differential inputs also support balanced source connections with better rejection of common-mode noise than a single-ended arrangement. In a new design, confirm input bandwidth, sync behavior, and register initialization against the target video standard.
Recomendado
Industrial Inspection Camera
The ADV7282WBCPZ-RL can serve as the analog-video receiver in an industrial inspection system where an analog camera signal must become digital image data for processing. The decoder’s 10-bit, 4× oversampled architecture supports faithful digitization, and differential inputs are useful when the camera connection is balanced or the cable path is electrically long. The ITU-R BT.656 stream and line-locked clock provide a direct connection to embedded imaging logic. Engineers should preserve controlled-impedance signal geometry, provide separate analog and digital return paths, and verify synchronization behavior across every supported input format before production release.
Recomendado
Security Camera Interface
The ADV7282WBCPZ-RL is suitable for the analog front end of a security camera or surveillance display chain when an existing camera produces composite or component video. Its differential inputs support noise-aware analog connections, while the 10-bit conversion and 4× oversampling supply digital samples to the downstream image pipeline. The decoder removes much of the parallel-interface burden by providing ITU-R BT.656 video and a line-locked clock. For compact camera electronics, the 5 mm × 5 mm 32-LFCSP package preserves board area, although exposed-pad layout, thermal loading, and connector grounding remain critical to image stability.
Recomendado
Portable Media Player
The ADV7282WBCPZ-RL supports space-constrained portable media designs that need to accept legacy analog video through a small mixed-signal package. The 32-lead LFCSP measures 5 mm × 5 mm, while the separate 1.62 V to 1.8 V digital and 2.8 V to 3.1 V analog rails allow the decoder to coexist with low-voltage digital logic. Its I2C-compatible configuration port allows firmware-driven setup, and the ITU-R BT.656 output can connect to a portable media processor. Layout must isolate analog input traces from display, power-converter, and memory-bus activity, while the exposed pad should be connected according to the manufacturer footprint guidance.
Recomendado
Video Test and Measurement
The ADV7282WBCPZ-RL can be used in video test equipment, format converters, and signal-conditioning fixtures that require a standardized digital representation of an analog source. The decoder converts supported SDTV analog input into ITU-R BT.656 data and supplies a line-locked clock for downstream timing. Its 10-bit output path and 4× oversampling make it useful when the measured or reconstructed video must retain fine amplitude detail. Instrument designers should account for the converter’s input bandwidth, synchronization, register calibration, and output timing when interpreting small-signal results. Stable analog grounding and short input paths are especially important when measuring source noise or compliance limits.
Recomendado
Automotive Display Interface
The ADV7282 family can support automotive video paths where an analog source must be digitized for a display or central video node. The related ADV7282AWBCPZ-M-RL specifically carries an A/M ordering option and AEC-Q100 identification, while the ADV7282WBCPZ-RL offers the same core 10-bit, 4× oversampled decoder function in a 32-LFCSP package. Differential inputs and controlled digital timing suit robust cable and board connections. For an automotive platform, choose the exact ordering option against the qualification, temperature, lifecycle, and sourcing requirements rather than substituting family members solely by footprint.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADV7282WBCPZ-RL — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADV7282A | ADV7282WBCPZ-M-RL | ADV7282AWBCPZ-M-RL |
|---|---|---|---|---|
| Package | 32-LFCSP (5x5) | 32-LFCSP (5x5) | 32-LFCSP (5x5) | 32-LFCSP (5x5) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Video Resolution | 10 bit | 10 bit | 10 bit | 10 bit |
| Oversampling | 4× | 4× | 4× | 4× |
| Digital Output Standard | ITU-R BT.656 | ITU-R BT.656 | ITU-R BT.656 | ITU-R BT.656 |
| Control Interface | I2C-compatible two-wire serial interface | I2C-compatible two-wire serial interface | I2C-compatible two-wire serial interface | I2C-compatible two-wire serial interface |
| Pin and Software Compatibility | ADV7282 baseline | Same pinout and software-compatible with ADV7282 | Same 32-LFCSP ADV7282 family format | Same 32-LFCSP ADV7282 family format |
Principais diferenciais
- Documented pin and software compatibility (vs ADV7282A)
- Automotive-oriented ordering option (vs ADV7282WBCPZ-M-RL)
- Compact mixed-signal integration (vs ADV7282AWBCPZ-M-RL)
Notas de projeto
Keep the differential analog-video traces short, impedance-controlled, and separated from switching nodes and digital clocks. Use the manufacturer's recommended differential trace geometry and maintain a continuous ground reference beneath the pairs. Route the P0-to-P7 digital outputs as a grouped, length-controlled bus to minimize skew, and keep the line-locked clock away from noisy power-converter traces.
The exposed thermal pad is part of the package thermal path and must be connected to the PCB ground plane using the manufacturer land pattern. Follow the recommended via arrangement and copper area to support heat spreading without compromising analog-signal routing. Validate junction temperature at the highest ambient temperature and maximum expected processor activity because thermal performance depends on the final board construction rather than the package outline alone.
The decoder requires separate analog and digital supply domains, so treat them as distinct filtering networks even when both originate from the same source. Place bypass capacitors close to the corresponding power pins and route supply current through the quietest available ground path. Avoid sharing narrow return paths between the analog input section and digital output switching, since supply disturbance can appear directly as video noise or timing instability.
Do not assume that matching the 32-LFCSP outline guarantees a drop-in replacement. Verify pin assignments, exposed-pad connection, supply levels, register behavior, clock expectations, qualification, and lifecycle status. The ADV7282A is explicitly documented as pin-compatible and software-compatible with the ADV7282, whereas related M and A/M ordering options still require review against the exact product-selection table before manufacturing release.
Informações de conformidade
The manufacturer product page identifies the ADV7282 family as not recommended for new designs. The Arrow product listing identifies the ADV7282WBCPZ as AEC-Q100 automotive-qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established for the exact ordering code.