ATMEGA329P-20MU - 8-bit AVR MCU, 32KB Flash, 20MHz | Microchip
N.º da peça: ATMEGA329P-20MU ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.85 | $7,85 |
| 10 | $7.05 | $70,50 |
| 100 | $6.15 | $615,00 |
| 500 | $5.42 | $2.710,00 |
| 1.000 | $4.78 | $4.780,00 |
ATMEGA329P-20MU Visão geral
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, I/O peripherals, and timers onto one die, executing instructions fetched from on-chip Flash. Within the broader taxonomy, the ATMEGA329P belongs to the AVR family of RISC microcontrollers, itself a subset of the picoPower low-power MCU category, which sits under the embedded computing / power-managed semiconductor hierarchy. The AVR core uses a Harvard-style architecture with separate program and data buses and a large register file of 32 general-purpose working registers directly tied to the ALU, enabling most instructions to complete in a single clock cycle.
Key features that differentiate the ATMEGA329P-20MU include 131 powerful instructions (most single-cycle execution), a hardware multiplier, two 8-bit timer/counters plus two 16-bit timer/counters with PWM, 8-channel 10-bit ADC, a USART, SPI and TWI (I2C-compatible) peripherals, an integrated LCD controller capable of driving segment displays up to 4 common and 32 segment lines, and a 4-channel PWM with programmable dead-time generators. Six sleep modes (Idle, Power-down, Power-save, Standby, Extended Standby, and ADC Noise Reduction) plus the picoPower 0.1uA real-time-clock operation make it attractive for battery-backed applications.
Architecturally, the ATMEGA329P-20MU adds the 'P' picoPower enhancements on top of the legacy ATmega329 die, lowering active current and supporting ultra-low-power RTC backup. The QFN-64 (MLF) package with exposed pad gives a low theta-JA for thermal dissipation and a small PCB footprint. It is pin-compatible with the ATmega169/329 family and shares the same peripheral mix for migration paths.
Typical applications include industrial control panels with integrated LCD segment displays, battery-powered metering and instrumentation, white-goods HMI, e-bike dashboards, medical handheld terminals, and remote sensor readout heads. The combination of LCD controller and picoPower sleep modes suits mains-line or battery-driven user-interface products. For designs requiring graphical TFT instead of segment LCD, consider the ATmega3290P or an external display controller.
When designing with this part, observe that '20MU' denotes the 20MHz speed grade at 5V operation; at lower Vcc the maximum clock must be derated per the datasheet DC characteristics. Place decoupling capacitors as close as possible to each VCC/GND pair and ensure the exposed pad is soldered to a sufficient ground copper pour for both thermal and electrical performance.
This page synthesizes distributor pricing as of 2026-09-17, drop-in same-package alternatives drawn from the same ATmega329/325 QFN-64 family, and practical design notes not aggregated on any single distributor product page.
Alternativas drop-in para ATMEGA329P-20MU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATMEGA329P-20MU (mesmo formato e footprint) — diferindo em Package, ADC, RoHS Status, Core Architecture, Supply Voltage (Vcc).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ATMEGA325P-20MU
✅ Drop-In✓ Em estoque
$2.21 / unidade
Ver ficha técnica →ATMEGA325PA-MUR
✅ Drop-In✓ Em estoque
$1.65 / unidade
Ver ficha técnica →ATMEGA329P-20AU
✅ Drop-In✓ Em estoque
$4.71 / unidade
Ver ficha técnica →ATMEGA329P-20MUR
✅ Drop-In✓ Em estoque
$5.4 / unidade
Ver ficha técnica →ATMEGA329P-20MU Classificações máximas e características elétricas
| Core | 8-bit AVR RISC |
| Flash Program Memory | 32 KB (16K x 16) |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| Maximum CPU Clock | 20 MHz |
| Supply Voltage (Vcc) | 2.7 V to 5.5 V |
| General-Purpose I/O Pins | 54 |
| Encapsulamento | 64-QFN / MLF (9 x 9 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| ADC | 8-channel, 10-bit |
| Timer/Counters | Two 8-bit + Two 16-bit with PWM |
| PWM Channels | 6 channels |
| Communication Interfaces | USART, SPI, TWI (I2C-compatible) |
| LCD Controller | Up to 4x32 segment driver (integrated) |
| On-chip Debug | JTAG |
| Faixa de temperatura de operação | -40C to +85C (Industrial) |
| Instruction Set | 131 instructions, mostly single-cycle |
| Working Registers | 32 x 8-bit |
| Watchdog Timer | Yes, programmable |
| Brown-out Detector | Yes |
| Sleep Modes | 6 (Idle, Power-down, Power-save, Standby, Ext Standby, ADC Noise Reduction) |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant (Green) |
Configuração de pinos do ATMEGA329P-20MU
| Pino 1 | VCC — Digital supply voltage |
| Pino 2 | GND — Ground |
| Pino 3 | PORTA0 — Port A bit 0 (digital I/O / ADC0) |
| Pino 4 | PORTA1 — Port A bit 1 (digital I/O / ADC1) |
| Pino 5 | PORTA2 — Port A bit 2 (digital I/O / ADC2) |
| Pino 6 | PORTA3 — Port A bit 3 (digital I/O / ADC3) |
| Pino 7 | PORTA4 — Port A bit 4 (digital I/O / ADC4) |
| Pino 8 | PORTA5 — Port A bit 5 (digital I/O / ADC5) |
| Pino 9 | PORTA6 — Port A bit 6 (digital I/O / ADC6) |
| Pino 10 | PORTA7 — Port A bit 7 (digital I/O / ADC7) |
| Pino 11 | AVCC — Analog supply voltage |
| Pino 12 | AREF — Analog reference voltage |
| Pino 13 | GND — Ground (analog) |
| Pino 14 | PORTB0 — Port B bit 0 (digital I/O) |
| Pino 15 | PORTB1 — Port B bit 1 (digital I/O) |
| Pino 16 | PORTB2 — Port B bit 2 (SS/OC1B) |
| Pino 17 | PORTB3 — Port B bit 3 (MOSI/OC1A) |
| Pino 18 | PORTB4 — Port B bit 4 (MISO) |
| Pino 19 | PORTB5 — Port B bit 5 (SCK) |
| Pino 20 | PORTB6 — Port B bit 6 (OC2B/PCINT6) |
| Pino 21 | PORTB7 — Port B bit 7 (OC2A/PCINT7) |
| Pino 22 | PORTC0 — Port C bit 0 (LCD SEG0) |
| Pino 23 | PORTC1 — Port C bit 1 (LCD SEG1) |
| Pino 24 | PORTC2 — Port C bit 2 (LCD SEG2) |
| Pino 25 | PORTC3 — Port C bit 3 (LCD SEG3) |
| Pino 26 | PORTC4 — Port C bit 4 (LCD SEG4) |
| Pino 27 | PORTC5 — Port C bit 5 (LCD SEG5) |
| Pino 28 | PORTC6 — Port C bit 6 (LCD SEG6) |
| Pino 29 | PORTC7 — Port C bit 7 (LCD SEG7) |
| Pino 30 | RESET — Reset input (active low) |
| Pino 31 | VCC — Digital supply voltage |
| Pino 32 | GND — Ground |
| Pino 33 | XTAL2 — Crystal oscillator output |
| Pino 34 | XTAL1 — Crystal oscillator input |
| Pino 35 | PORTD0 — Port D bit 0 (RXD/INT0) |
| Pino 36 | PORTD1 — Port D bit 1 (TXD/INT1) |
| Pino 37 | PORTD2 — Port D bit 2 (INT2) |
| Pino 38 | PORTD3 — Port D bit 3 (INT3) |
| Pino 39 | PORTD4 — Port D bit 4 (OC1B) |
| Pino 40 | PORTD5 — Port D bit 5 (OC1A) |
| Pino 41 | PORTD6 — Port D bit 6 (OC2B/ICP) |
| Pino 42 | PORTD7 — Port D bit 7 (OC2A) |
| Pino 43 | PORTE0 — Port E bit 0 (RXD0/PCINT8) |
| Pino 44 | PORTE1 — Port E bit 1 (TXD0) |
| Pino 45 | PORTE2 — Port E bit 2 (XCK0/AIN0) |
| Pino 46 | PORTE3 — Port E bit 3 (OC3A/AIN1) |
| Pino 47 | PORTE4 — Port E bit 4 (OC3B/INT4) |
| Pino 48 | PORTE5 — Port E bit 5 (OC3C/INT5) |
| Pino 49 | PORTE6 — Port E bit 6 (TOSC1) |
| Pino 50 | PORTE7 — Port E bit 7 (TOSC2) |
| Pino 51 | PORTF0 — Port F bit 0 (ADC0/TDI) |
| Pino 52 | PORTF1 — Port F bit 1 (ADC1/TDO) |
| Pino 53 | PORTF2 — Port F bit 2 (ADC2/TMS) |
| Pino 54 | PORTF3 — Port F bit 3 (ADC3/TCK) |
| Pino 55 | PORTF4 — Port F bit 4 (ADC4) |
| Pino 56 | PORTF5 — Port F bit 5 (ADC5) |
| Pino 57 | PORTF6 — Port F bit 6 (ADC6) |
| Pino 58 | PORTF7 — Port F bit 7 (ADC7) |
| Pino 59 | PORTG0 — Port G bit 0 (WR) |
| Pino 60 | PORTG1 — Port G bit 1 (RD) |
| Pino 61 | PORTG2 — Port G bit 2 (ALE) |
| Pino 62 | PORTG3 — Port G bit 3 |
| Pino 63 | PORTG4 — Port G bit 4 (TOSC1 alt) |
| Pino 64 | PORTG5 — Port G bit 5 (OC0B) |
Aplicações típicas
ATMEGA329P-20MU é adequado para 6 aplicaçãos: Industrial Metering & Sub-metering with Segment LCD, Battery-Powered Sensor / Data Logger Heads, White Goods / Appliance HMI Panels, E-Bike / Scooter Dashboard & Battery Display, Medical Handheld / Point-of-Care Devices, Industrial Control Panels with Segment Display.
Industrial Metering & Sub-metering with Segment LCD
The ATMEGA329P-20MU's integrated 4x32 segment LCD controller eliminates the need for an external driver IC in electricity, water, gas, or heat meters. Its 32KB Flash holds metering firmware plus IEC 62056-21 / DLMS protocol stacks, and 2KB SRAM handles measurement buffers. The picoPower active current (~1mA per MHz at 3.3V) plus 0.1uA RTC backup enables battery-augmented designs for retrofit meters. Place the QFN-64 exposed pad over a generous ground copper pour for thermal stability during 24/7 operation.
Recomendado
Battery-Powered Sensor / Data Logger Heads
With six software-selectable sleep modes drawing as little as 0.1uA in Power-save with RTC running, the ATMEGA329P-20MU is ideal for remote sensor heads that wake periodically, sample, log to EEPROM, and return to sleep. The 8-channel 10-bit ADC reads sensor voltages directly; the on-chip bandgap reference simplifies ratiometric measurements. Battery life of multiple years is achievable when duty-cycling the ADC and USART. The QFN-64 9x9mm footprint suits small enclosures.
Recomendado
White Goods / Appliance HMI Panels
Washing machines, ovens, dishwashers, and microwaves use the ATMEGA329P-20MU to drive a 4-digit segment display, read capacitive or resistive touch buttons, control relays via GPIO, and communicate with the main appliance controller over UART. The 20MHz clock handles real-time UI updates without perceptible lag, while the integrated LCD driver reduces BOM cost compared to designs using an external HT1621. Industrial -40 to +85C operation handles under-counter or garage environments.
Recomendado
E-Bike / Scooter Dashboard & Battery Display
The ATMEGA329P-20MU drives a segment-LCD speed, battery, and trip display, reads wheel-reed pulses and throttle position via ADC, and updates the user in real time. Its 2.7V minimum operating voltage is well-suited for 1S Li-ion packs with onboard 3.3V regulators. Six PWM channels drive indicator LEDs or control a buzzer. JTAG debug enables rapid firmware iteration during product development.
Recomendado
Medical Handheld / Point-of-Care Devices
Handheld glucose meters, INR readers, and pulse-oximeter displays benefit from the ATMEGA329P-20MU's combination of segment-LCD controller, picoPower sleep, and industrial temperature range. The 32KB Flash holds the measurement algorithm plus a full alphanumeric UI state machine. 1KB EEPROM retains calibration constants across battery swaps. SPI/TWI interfaces connect to external ADC, EEPROM, or Bluetooth modules. QFN-64 keeps the PCB small enough to fit a pen-style housing.
Recomendado
Industrial Control Panels with Segment Display
Control panels for HVAC, pumps, motor starters, and building automation use the ATMEGA329P-20MU to display operating state on a segment LCD, scan keypads, drive relays or triacs via GPIO and PWM, and report telemetry over RS-485 / Modbus via the on-chip USART. The 20MHz core handles background polling of inputs while servicing the LCD controller via DMA-free polled updates. Wide 2.7V to 5.5V supply range simplifies designs that tap 3.3V or 5V rails.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATMEGA329P-20MU — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATMEGA325P-20MU | ATMEGA325PA-MU | ATMEGA329P-20AU | ATMEGA329P-20MUR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (MLF) 9x9mm | 64-QFN (MLF) 9x9mm - same | 64-QFN (MLF) 9x9mm - same | 64-TQFP 14x14mm - different footprint | 64-QFN (MLF) 9x9mm - same |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Maximum Clock | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Integrated LCD Controller | Yes (4x32 segments) | No | No | Yes (4x32 segments) | Yes (4x32 segments) |
| picoPower Low-Power Features | Yes | No | Yes | Yes | Yes |
| Operating Voltage | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principais diferenciais
- Integrated 4x32 segment LCD controller with no external driver IC required (vs ATMEGA325P-20MU)
- picoPower low-power architecture with 6 sleep modes and 0.1uA RTC backup (vs ATMEGA325P-20MU)
- QFN-64 9x9mm package footprint for compact, thermally-efficient layouts (vs ATMEGA329P-20AU (TQFP-64))
- On-chip JTAG debug and boundary-scan for production test (vs ATMEGA328P-MU (32-pin QFN))
Notas de projeto
Place a 100nF decoupling capacitor as close as possible to each VCC pin pair (pins 1 and 31), plus a 10uF bulk capacitor on the AVCC pin (pin 11). The QFN-64 exposed thermal pad MUST be soldered to a continuous ground copper pour with at least 8 thermal vias to the inner ground plane for both thermal dissipation and electrical grounding. Failing to solder the EP will result in excessive junction temperature and erratic analog ADC readings.
The '20' speed grade guarantees 20MHz operation only at 4.5V to 5.5V Vcc. Below 4.5V, the maximum clock frequency must be derated per the speed-grade tables in section 29 of the datasheet - for example at 2.7V the maximum is 10MHz. To use a low-tick 32.768kHz crystal on the TOSC1/TOSC2 pins (PE6/PE7) for RTC operation, configure the asynchronous timer correctly and select the appropriate fuse bits. Power-save mode with Timer2 running asynchronously can achieve 0.1uA typical RTC backup current.
Do not assume all 54 I/O pins are 5V-tolerant at 3.3V operation - any pin configured as an input has high-impedance and may need a pull-up. The JTAG pins (PF0-PF3) are multiplexed with the JTAG controller; disable JTAG via fuses if those pins are needed as standard GPIO in production. The LCD controller's segment pins (PC0-PC7 and PORTG) drive the glass directly - check segment load current limits in the datasheet LCD electrical characteristics when designing the display interface.
Informações de conformidade
RoHS and Green compliant per Microchip product page (formerly Atmel). Not AEC-Q100 qualified - for automotive applications consult Microchip automotive-grade ATmega equivalents. Halogen-free and lead-free per ordering information.
