ATSAML10D15A-YUT - 32KB Flash Cortex-M23 MCU | Microchip
N.º da peça: ATSAML10D15A-YUT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.95 | $2,95 |
| 10 | $2.66 | $26,60 |
| 100 | $2.36 | $236,00 |
| 500 | $2.12 | $1.060,00 |
| 1.000 | $1.89 | $1.890,00 |
ATSAML10D15A-YUT Visão geral
What is a low-power Cortex-M23 microcontroller? A 32-bit microcontroller is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a set of peripherals on a single die. The Cortex-M23 is Arm's smallest and most energy-efficient TrustZone-capable core, sitting below Cortex-M0+ and Cortex-M3 in the hierarchy: ARM core -> Cortex-M family -> Cortex-M23 -> SAM L10/L11 MCU -> 32-bit low-power microcontroller. The SAM L10 family specifically targets battery-powered applications that need deterministic performance with deep-sleep current below 100 nA.
Key features include less than 25 uA/MHz active mode power consumption, less than 100 nA sleep mode current, an enhanced peripheral touch controller (PTC), multiple SERCOM serial interfaces, a 12-bit ADC, 10-bit DAC, on-chip op-amp, and analog comparators. The integrated ISO7816 smart card interface and event system make it suitable for secure and event-driven designs without CPU wake-ups.
The device is built on a low-leakage process and integrates Arm TrustZone for Cortex-M23, allowing secure and non-secure firmware regions. The peripheral touch controller supports capacitive buttons, sliders, and proximity sensing in noisy environments, while the 12-bit ADC and 10-bit DAC provide sufficient resolution for sensor conditioning and small-signal generation tasks.
Typical applications include IoT sensor nodes, secure wearables, smart card terminals, capacitive touch user interfaces, and battery-powered industrial edge devices. The combination of sub-100 nA sleep current and TrustZone security makes the SAM L10 particularly attractive for always-on sensor endpoints.
When designing with this part, choose the L10 over the L11 only if you do not need the L11's additional crypto accelerators and larger SRAM; both share the same Cortex-M23 core. The 24-SSOP package is footprint-compatible with other SAM L10/L11 24-pin variants.
This page synthesizes distributor pricing, drop-in 24-SSOP alternatives, and design notes not consolidated on the Microchip datasheet. Sourced from DigiKey, Mouser, and the Microchip product page as of 2026-09-22.
Alternativas drop-in para ATSAML10D15A-YUT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATSAML10D15A-YUT (mesmo formato e footprint) — diferindo em Package, Core Architecture, ADC, Active Mode Current, DAC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ATSAML10D15A-YFT
✅ Drop-In✓ Em estoque
$2.1 / unidade
Ver ficha técnica →ATSAML10D15A-MF
✅ Drop-In✓ Em estoque
$1.52 / unidade
Ver ficha técnica →ATSAML10D14A-MF
✅ Drop-In✓ Em estoque
$2.18 / unidade
Ver ficha técnica →ATSAML10D15A-YU
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATSAML10D14A-YUT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATSAML10D15A-YUT Classificações máximas e características elétricas
| Core Architecture | ARM Cortex-M23 32-bit |
| Maximum CPU Clock | 32 MHz |
| Program Memory (Flash) | 32 KB (32K x 8) |
| SRAM | 8 KB |
| Encapsulamento | 24-SSOP (0.209", 5.30 mm width) |
| Active Mode Current | < 25 uA/MHz |
| Sleep Mode Current | < 100 nA |
| ADC | 12-bit |
| DAC | 10-bit |
| On-Chip Op-Amp | Yes |
| Analog Comparator (AC) | Yes |
| Peripheral Touch Controller (PTC) | Yes (enhanced) |
| SERCOM Modules | Multiple (configurable USART/SPI/I2C) |
| Smart Card Interface | ISO7816 |
| Security | Arm TrustZone for Cortex-M23 |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do ATSAML10D15A-YUT
| Pino 1 | VDD — Power supply input |
| Pino 2 | GND — Ground |
| Pino 3 | RESET — Reset input, active low |
| Pino 4 | PA00 — GPIO / SERCOM / ADC |
| Pino 5 | PA01 — GPIO / SERCOM / ADC |
| Pino 6 | PA02 — GPIO / SERCOM / ADC / DAC |
| Pino 7 | PA03 — GPIO / SERCOM / ADC / DAC |
| Pino 8 | PA04 — GPIO / SERCOM |
| Pino 9 | PA05 — GPIO / SERCOM |
| Pino 10 | PA06 — GPIO / SERCOM |
| Pino 11 | PA07 — GPIO / SERCOM |
| Pino 12 | PA08 — GPIO / SERCOM |
| Pino 13 | PA09 — GPIO / SERCOM |
| Pino 14 | PA10 — GPIO / SERCOM |
| Pino 15 | PA11 — GPIO / SERCOM |
| Pino 16 | PA14 — GPIO / PTC |
| Pino 17 | PA15 — GPIO / PTC |
| Pino 18 | PA16 — GPIO / PTC |
| Pino 19 | PA17 — GPIO / PTC |
| Pino 20 | PA22 — GPIO / PTC / AC |
| Pino 21 | PA23 — GPIO / PTC / AC |
| Pino 22 | SWDIO — Serial Wire Debug data |
| Pino 23 | SWCLK — Serial Wire Debug clock |
| Pino 24 | GND — Ground |
Aplicações típicas
ATSAML10D15A-YUT é adequado para 6 aplicaçãos: Battery-Powered IoT Sensor Node, Capacitive Touch User Interface, Smart Card Terminal (ISO7816), Wearable Fitness Tracker, Industrial Wireless Sensor Node, Secure Smart Lock.
Battery-Powered IoT Sensor Node
The ATSAML10D15A-YUT is ideal for battery-powered IoT sensor nodes because of its industry-leading <100 nA sleep current and <25 uA/MHz active consumption. The 32 KB Flash accommodates typical BLE/Zigbee stack and application code, while 8 KB SRAM handles small sensor buffers. TrustZone isolates secure key storage from the main application, preventing firmware extraction. In a typical deployment, the MCU spends 99% of its time in deep sleep and wakes briefly to read a sensor via the 12-bit ADC and transmit via a SERCOM-configured SPI link to a radio module, achieving multi-year coin-cell battery life.
Recomendado
Capacitive Touch User Interface
The ATSAML10D15A-YUT integrates an enhanced peripheral touch controller (PTC) that supports capacitive buttons, sliders, and proximity sensing without external components. Combined with the on-chip op-amp and 12-bit ADC, the MCU can also read resistive sensors in the same design. The sub-100 nA sleep current means the touch interface remains always-on without draining the battery. The 32 KB Flash is sufficient to host a touch library plus application logic, while the Cortex-M23's deterministic interrupt latency ensures low-latency touch response. Reference designs in the SAM L10 datasheet demonstrate waterproof touch button arrays.
Recomendado
Smart Card Terminal (ISO7816)
The ATSAML10D15A-YUT includes a dedicated ISO7816 smart card interface, eliminating the need for an external UART-to-smart-card bridge IC. The Cortex-M23 core handles the T=0/T=1 protocol stack while TrustZone protects the cryptographic key material. Active mode power under 25 uA/MHz keeps the reader within USB bus-power budgets. The 24-SSOP package provides 24 pins, sufficient for VCC, RST, CLK, I/O, and several GPIOs for status LEDs and user feedback. This MCU is used in point-of-sale terminals, electronic ID readers, and SIM programming tools.
Recomendado
Wearable Fitness Tracker
Wearables require sub-100 nA standby current to achieve multi-day battery life, which the ATSAML10D15A-YUT delivers. The Cortex-M23 core at 32 MHz runs heart-rate, step-counting, and display-update algorithms, while the on-chip DAC drives an LED driver for optical heart-rate sensing. The 12-bit ADC reads battery voltage and motion sensor data through SERCOM-configured I2C/SPI. TrustZone isolates biometric data from general-purpose firmware, meeting emerging privacy requirements. The 24-SSOP package fits inside thin wearable enclosures with a 5.30 mm width and 0.65 mm pitch.
Recomendado
Industrial Wireless Sensor Node
The ATSAML10D15A-YUT suits industrial 4-20 mA loop-powered sensor nodes because of its low active power (<25 uA/MHz) and wide operating temperature range typical of the SAM L10 family. The on-chip op-amp and 12-bit ADC condition 4-20 mA current sense or bridge sensor signals directly, eliminating external analog front-ends. SERCOM interfaces connect to RS-485, LoRa, or WirelessHART transceivers. Industrial users value the deterministic Cortex-M23 interrupt latency for time-critical protocol handling. TrustZone secures calibration constants and prevents field tampering.
Recomendado
Secure Smart Lock
Smart locks benefit from the ATSAML10D15A-YUT's TrustZone for Cortex-M23, which isolates credential storage from the application firmware. The <100 nA sleep current enables years of battery life on a coin cell. The enhanced peripheral touch controller supports capacitive keypad entry, while the 10-bit DAC drives a buzzer for feedback. SERCOM interfaces support BLE for smartphone pairing. The integrated ISO7816 interface can read RFID cards for credential authentication. The 24-SSOP package fits inside the limited PCB area of a cylindrical lock body.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATSAML10D15A-YUT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATSAML10D15A-YFT | ATSAML10D15A-MF | ATSAML10D15A-YU | ATSAML10D14A-MF | ATSAML10D14A-YUT |
|---|---|---|---|---|---|---|
| Package | 24-SSOP | 24-SSOP - same | 24-SSOP - same | 24-SSOP - same | 24-SSOP - same | 24-SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 | ARM Cortex-M23 |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 16 KB (-50%) | 16 KB (-50%) |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Max CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Active Current | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz | <25 uA/MHz |
| Sleep Current | <100 nA | <100 nA | <100 nA | <100 nA | <100 nA | <100 nA |
Principais diferenciais
- Industry-lowest sleep current in the 24-SSOP Cortex-M23 segment (vs ATSAML10D14A-YUT)
- Larger Flash for application complexity (vs ATSAML10D14A-MF)
- Tape-and-reel shipping for SMT assembly (vs ATSAML10D15A-YU)
Notas de projeto
The ATSAML10D15A-YUT sleep current of <100 nA is achievable only when unused peripherals are disabled in the PMUX/PMEN registers and the Cortex-M23 is in WAIT or RETAIN sleep mode. Estimated: at 32 MHz active current of 25 uA/MHz, the MCU draws ~800 uA; transitioning to deep sleep between sensor reads reduces average current by 1000x for duty-cycled IoT nodes. Always configure the brown-out detector (BOD33) at the lowest threshold that matches your supply rail to minimize quiescent draw.
Place the 100 nF VDD decoupling capacitor within 3 mm of the VDD pin, with a via to a clean ground plane. Add a 1 uF bulk capacitor near the MCU for the analog supply rail (VDDANA). The 24-SSOP package has a 0.65 mm pin pitch, requiring fine-pitch PCB manufacturing. Route SWDIO and SWCLK away from noisy switching nodes to prevent debug-interface lockups. Expose the RESET pin to a test pad for in-system programming.
Do not assume TrustZone is enabled by default - secure firmware must configure the Security Attribution Unit (SAU) at startup to partition Flash into secure and non-secure regions. Forgetting to configure the SAU leaves the entire device in secure mode and may break non-secure application code. Additionally, the peripheral touch controller (PTC) requires dedicated firmware calibration for the specific PCB overlay material and thickness; reference Microchip application notes for touch tuning.
Informações de conformidade
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose ATSAML10E or SAM V71 family variants for automotive applications.
