Microchip Technology

ATSAML11D15A-YF - 32MHz Cortex-M23 MCU, 32KB Flash | Microchip

N.º da peça: ATSAML11D15A-YF ✓ Ativo
1.62 V to 3.63 V Vdss Less than 25 uA/MHz Id Chip-level tamper resistance Rds(on) 24-pin SSOP (0.209 in, 5.30 mm width) Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

ATSAML11D15A-YF Visão geral

The Microchip Technology ATSAML11D15A-YF is a 32-bit Arm Cortex-M23 microcontroller operating up to 32 MHz with 32 KB of flash memory and 8 KB of SRAM in a 24-pin SSOP package. Its 1.62 V to 3.63 V operating range, integrated hardware security, and low-power operating modes suit compact embedded systems requiring secure key storage and low standby consumption.

A microcontroller is the central processing element of an embedded control system, combining a CPU core, program memory, data memory, peripherals, and I/O in one integrated circuit. In the product hierarchy, the ATSAML11D15A-YF is an Arm Cortex-M23 microcontroller within Microchip's SAM L11 family and the broader category of 32-bit embedded microcontrollers. Its SERCOM-based serial peripherals also give designers access to UART, SPI, and I2C functions through a configurable peripheral architecture.

Three headline characteristics distinguish this device: a 32 MHz maximum operating frequency, 32 KB of flash, and 8 KB of SRAM. The microcontroller also provides 17 I/O pins, a 12-bit ADC, DAC, op amp, and AC comparator according to its product-family feature description. Arm TrustZone Technology separates secure and non-secure software environments, while the integrated cryptographic accelerator supports hardware-backed cryptographic operations.

The SAM L11 architecture targets security-sensitive and power-constrained products. Microchip describes the family as consuming less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. Its 1.62 V to 3.63 V supply range accommodates energy-harvesting, industrial, medical, and connected embedded applications where minimum operating voltage and sleep current affect the overall power budget.

Typical uses include secure sensor nodes, compact industrial controllers, medical monitoring equipment, wearable accessories, and battery-powered IoT devices. The combination of TrustZone isolation, tamper-resistant security features, and a 32 MHz Cortex-M23 core allows secure firmware and trusted code to coexist with ordinary application code. The 24-SSOP package also supports designs that require through-hole-style assembly rather than a very small land pattern.

Designers should check the package pin multiplexing and peripheral instance requirements in the manufacturer datasheet before finalizing PCB routing. Keep decoupling capacitors close to the supply pins, use the specified internal and external clock arrangements, and confirm that the selected operating temperature range remains valid for the end product. Security provisioning, protected key handling, and firmware update procedures should also be planned before production.

This page combines the ATSAML11D15A-YF device specifications, verified drop-in references, application guidance, and practical design considerations to help engineers evaluate the Microchip SAM L11 microcontroller for secure, low-power embedded designs.

Alternativas drop-in para ATSAML11D15A-YF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ATSAML11D15A-YF (mesmo formato e footprint) — diferindo em Package, Active Mode Current, Operating Temperature Range, Sleep Mode Current, ADC.

Microchip Technology
Package: 24-SSOP
Active Mode Current: <25 uA/MHz
Sleep Mode Current: <100 nA
Comparar com ATSAML11D15A-YF →
Microchip Technology
Package: 24-SSOP (0.209", 5.30mm Width)
Operating Temperature Range: -40°C to +85°C (industrial)
ADC: 12-bit
Comparar com ATSAML11D15A-YF →
Microchip Technology
Package: 24-SSOP (0.209" / 5.30 mm width)
Active Mode Current: < 25 uA/MHz
Operating Temperature Range: -40 C to +125 C
Comparar com ATSAML11D15A-YF →

ATSAML11D15A-YUT

✅ Drop-In
Microchip Technology
📦 24-SSOP
ARM Cortex-M23 · 32-bit · 32 MHz · 32 KB (32K x 8) · 8 KB SRAM · ARM TrustZone-M (hardware isolation) · 1.62 V to 3.63 V · < 25 µA/MHz

Consulte o preço

Ver ficha técnica →

ATSAML11D15A-YF Classificações máximas e características elétricas

Product Type 32-bit Microcontroller
CPU Core Arm Cortex-M23
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K x 8)
SRAM 8 KB
Operating Voltage Range 1.62 V to 3.63 V
Number of I/O Pins 17
Encapsulamento 24-pin SSOP (0.209 in, 5.30 mm width)
Faixa de temperatura de operação -40 °C to +125 °C
Serial Interfaces I2C, SPI, UART
Analog Peripherals ADC, DAC, op amp, AC comparator
Security Architecture Arm TrustZone Technology
Cryptographic Support Crypto accelerator with secure key storage
Active Mode Current Less than 25 uA/MHz
Sleep Mode Current Less than 100 nA
Tamper Resistance Chip-level tamper resistance
Supply Type 3.3 V
Shipping Format Tube

Guia de Configuração de Pinos do ATSAML11D15A-YF 24-pin ssop (0.209 in, 5.30 mm width)

Configuração de pinos para ATSAML11D15A-YF (pacote 24-pin ssop (0.209 in, 5.30 mm width)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 24-pin ssop (0.209 in, 5.30 mm width) para ATSAML11D15A-YF

Nenhum dado detalhado de pinagem disponível para ATSAML11D15A-YF.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ATSAML11D15A-YF é adequado para 6 aplicaçãos: Secure IoT Sensor Nodes, Battery-Powered Medical Monitoring, Compact Industrial Controllers, Secure Access and Authentication Terminals, Wearable and Personal-Accessory Devices, Low-Power Sensor Hubs.

🧩

Secure IoT Sensor Nodes

The ATSAML11D15A-YF fits compact wireless sensor nodes that need hardware-backed security and low standby power. Its Cortex-M23 core runs up to 32 MHz for protocol processing, while Arm TrustZone isolates trusted code from the main application and the crypto accelerator supports protected key operations. With less than 100 nA sleep-mode consumption, the device can remain available for periodic sensing without keeping the processor continuously active. The 1.62 V to 3.63 V operating range also supports low-voltage supply designs. Use the 17 available I/O pins for sensors and communications, and plan wake-up behavior in firmware to determine the achievable battery life.

💊

Battery-Powered Medical Monitoring

The ATSAML11D15A-YF is appropriate for compact medical monitoring devices where power consumption, security, and signal-chain integration matter. The integrated ADC, DAC, op amp, and AC comparator reduce the need for external conditioning components, while the 32 MHz Cortex-M23 core provides responsive control. Arm TrustZone allows security-sensitive firmware, credential handling, and device authentication to be separated from ordinary application code. The -40 °C to +125 °C specification supports designs evaluated across extended environmental ranges. Medical certification, patient-safety isolation, and clinical validation remain system-level requirements and must be assessed independently of the microcontroller specifications.

🏭

Compact Industrial Controllers

The ATSAML11D15A-YF can serve as the control core in small industrial modules that combine sensing, communication, and local decision-making. Its 32-bit Cortex-M23 architecture and 32 MHz maximum clock support responsive protocol handling, and the SERCOM peripherals provide UART, SPI, and I2C options without requiring separate interface controllers. The 24-pin SSOP package is practical for boards where a fine-pitch QFN assembly process is undesirable. Operating from -40 °C to +125 °C provides useful temperature-range margin, but enclosure temperature, power-supply tolerance, and EMC performance still require system-level verification.

🔐

Secure Access and Authentication Terminals

The ATSAML11D15A-YF is well matched to access-control readers, credential terminals, and other security-sensitive embedded products. TrustZone establishes hardware-based isolation for trusted and non-secure code, while secure key storage and the cryptographic accelerator reduce the software burden for protected authentication workflows. The 32 MHz core handles user-interface logic and peripheral management, and the 17 I/O pins can support displays, keys, readers, and network interfaces. The -125 °C upper temperature grade also provides margin for outdoor equipment. Enclosure tamper response and secure provisioning procedures must be implemented according to the manufacturer's security guidance.

📱

Wearable and Personal-Accessory Devices

The ATSAML11D15A-YF can serve as the low-power controller in wearables and personal accessories where board area and battery capacity are constrained. Its less-than-25-uA/MHz active-mode figure and less-than-100-nA sleep-mode specification make duty-cycled operation practical, while the 24-pin SSOP package simplifies inspection and prototype assembly. The Cortex-M23 processor handles user actions and sensor fusion, and the configurable serial interfaces support a display, sensor, or companion communication module. Designers should verify the exact pin multiplexing and whether the selected package variant fits the wearable's thickness and assembly process before committing to the PCB layout.

📡

Low-Power Sensor Hubs

The ATSAML11D15A-YF works well in a sensor hub that gathers measurements from low-power sensors and presents them through a serial link. Its integrated ADC, DAC, op amp, and AC comparator allow the board to perform local excitation, measurement, and signal conditioning without a separate analog controller. The 1.62 V minimum supply voltage supports low-energy operating conditions, and sleep-mode current below 100 nA helps preserve standby capacity. UART, SPI, and I2C options allow connection to radio or storage modules. Optimize performance by leaving unused peripherals disabled and selecting sleep settings that match the data-acquisition cadence.

What is the ATSAML11D15A-YF microcontroller?
The ATSAML11D15A-YF is a 32-bit Arm Cortex-M23 microcontroller from Microchip's SAM L11 family, operating up to 32 MHz with 32 KB of flash and 8 KB of SRAM. It is packaged in a 24-pin SSOP and includes 17 I/O pins, TrustZone security, and serial peripherals for UART, SPI, and I2C. According to the Microchip ATSAML11D15A product page, the family emphasizes chip-level security, secure key storage, and very low power consumption for embedded products.
What are the key specifications of ATSAML11D15A-YF?
The key ATSAML11D15A-YF specifications are a 32 MHz Cortex-M23 core, 32 KB of flash memory, 8 KB of SRAM, and a 1.62 V to 3.63 V operating range. The device provides 17 I/O pins and a -40 °C to +125 °C temperature range. Microchip also identifies TrustZone support, a crypto accelerator, secure key storage, and ADC, DAC, op amp, and comparator peripherals as core attributes of the SAM L11 family.
What is the ATSAML11D15A-YF pinout and package?
The ATSAML11D15A-YF uses a 24-pin SSOP package measuring 0.209 inches, or 5.30 mm, in body width. Its 24 pins provide power, ground, Arm Cortex-M23 debug and clock functions, I/O, and multiplexed serial and analog signals. Use the pin-description table in the manufacturer datasheet when assigning PCB nets because several peripheral functions can be routed through the same I/O pins.
Where can I download the ATSAML11D15A-YF datasheet PDF?
The ATSAML11D15A-YF datasheet can be obtained from the Microchip product page for the ATSAML11D15A family or through the component's Octopart datasheet result. The manufacturer page is the authoritative source for electrical characteristics, pin multiplexing, memory maps, security features, and package drawings. Open the Request a Quote form on this page when purchasing needs a confirmed lead time and current stock position.
Is the ATSAML11D15A-YF suitable for battery-powered IoT devices?
Yes, the ATSAML11D15A-YF is well suited to battery-powered IoT and sensor-node designs because the SAM L11 family operates at less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. Its 1.62 V minimum operating voltage can also help designers operate from low-capacity energy sources. The final battery life depends on the selected operating frequency, peripheral activity, sleep configuration, and sensor duty cycle.
What security features does the ATSAML11D15A-YF provide?
The ATSAML11D15A-YF provides Arm TrustZone Technology, secure key storage, a cryptographic accelerator, and chip-level tamper resistance. TrustZone enables isolation between secure and non-secure software, allowing trusted code and protected keys to be separated from the main application environment. Microchip identifies these capabilities as defining features of the low-power, security-focused SAM L11 family.
What is the difference between ATSAML11D15A-YF and ATSAML11D15A-YU?
The principal documented difference is the temperature grade: the ATSAML11D15A-YF is specified from -40 °C to +125 °C, while the ATSAML11D15A-YU is listed for -40 °C to +85 °C. Both are 24-pin SSOP devices in the same SAM L11 family with a Cortex-M23 core, 32 KB of flash, and 8 KB of SRAM. Use the manufacturer pin and ordering tables to confirm all order-code differences before substituting.
Can ATSAML11D15A-YU replace ATSAML11D15A-YF in an existing PCB?
The ATSAML11D15A-YU can be considered as a same-package alternative for designs whose worst-case ambient and board temperatures remain below +85 °C. Its SSOP footprint and core, memory, voltage, and peripheral resources align with the ATSAML11D15A-YF, but the reduced upper temperature rating is a functional limit. Review the ordering code, pin multiplexing, temperature grade, and qualification requirements before approving the substitution.
When should I choose ATSAML11D15A-YF instead of a larger Cortex-M23 microcontroller?
Choose the ATSAML11D15A-YF when a design needs 32 KB of flash, 8 KB of SRAM, and the security capabilities of the SAM L11 family without paying for additional memory or pins. Its 17 I/O pins and 24-pin SSOP package are appropriate for compact control products. Select a larger Cortex-M23 device only when the application requires more RAM, flash, I/O, communication channels, or peripheral resources than this part provides.
Is ATSAML11D15A-YF suitable for industrial applications?
The ATSAML11D15A-YF is suitable for many industrial applications because it supports operation from -40 °C to +125 °C and operates across a 1.62 V to 3.63 V supply range. Its low-power sleep specification and hardware security are valuable for connected industrial sensors and compact controllers. Equipment-level EMC, environmental, and functional-safety requirements must still be evaluated separately from the microcontroller specifications.
How much power does the ATSAML11D15A-YF consume?
Microchip specifies the SAM L11 family as consuming less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. At a 32 MHz operating frequency, these figures describe a performance envelope rather than a single system-level current because peripherals and I/O activity change the actual draw. Verify the relevant operating-mode current curves in the manufacturer datasheet for the final clock, peripheral, and sleep configuration.
What is the best drop-in replacement for ATSAML11D15A-YF?
The closest same-family drop-in candidate identified for the ATSAML11D15A-YF is the ATSAML11D15A-YU, which uses the same 24-pin SSOP format and retains the Cortex-M23 core, 32 KB flash, and 8 KB SRAM. Its upper temperature rating is only +85 °C, so it is a drop-in option only when the assembly will not exceed that temperature. Other cross-reference results use different packages or belong to different microcontroller families and are not direct replacements.
What can replace ATSAML11D15A-YF?
The ATSAML11D15A-YU is the most practical replacement identified within the same SAM L11 family and 24-pin SSOP package, subject to its lower +85 °C maximum temperature rating. Parts from larger SAM families may provide related capabilities but require careful verification of pin multiplexing, memory, voltage, and firmware requirements. Do not treat a same-family or functionally similar part as a drop-in replacement without checking the package and ordering information.
How do I choose between ATSAML11D15A-YF and ATSAML11D15A-YU for a temperature-sensitive design?
Choose the ATSAML11D15A-YF when the product must operate across -40 °C to +125 °C, and choose the ATSAML11D15A-YU when the qualified operating envelope stays within -40 °C to +85 °C. Both provide the same 32 MHz Cortex-M23 core, 32 KB of flash, 8 KB of SRAM, and 24-pin SSOP format. For temperature-critical industrial equipment, the -YF grade provides the additional operating margin.
Where can I buy ATSAML11D15A-YF online?
Use the Request a Quote form on this page to request current ATSAML11D15A-YF pricing, stock confirmation, quantity breaks, and a delivery estimate. The part is offered in a 24-pin SSOP tube format, so confirm the tube quantity and your assembly line's tube-feeding capability. A current manufacturer or authorized-channel lead time should be confirmed before the procurement is committed.
How many I/O pins and serial interfaces does ATSAML11D15A-YF have?
The ATSAML11D15A-YF provides 17 I/O pins and supports I2C, SPI, and UART through its configurable serial peripheral architecture. It also includes ADC, DAC, op amp, and AC comparator functions. Because these peripheral signals are multiplexed across a limited pin set, assign the required functions in the pin-mux configuration early in the hardware design and consult the package pin table before assigning nets.

Dados de referência de engenharia para ATSAML11D15A-YF — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ATSAML11D15A-YF when the product must operate across -40 °C to +125 °C, needs 32 KB of flash and 8 KB of SRAM, and benefits from Cortex-M23 performance with TrustZone-protected security. The ATSAML11D15A-YU is the practical same-family alternative when the complete assembly is guaranteed to remain within -40 °C to +85 °C; it retains the 32 MHz core, memory sizes, voltage range, and 24-pin SSOP format. Avoid both when the application requires substantially more RAM, flash, I/O, or peripheral channels, because larger SAM-family devices would then be more appropriate. Before finalizing a substitution, compare ordering codes, package drawings, pin multiplexing, temperature grade, firmware support, and security provisioning. For commercial scheduling, use the Request a Quote form on this page to confirm stock, quantity breaks, and the current lead time.

Comparação com alternativas

Parâmetro Este produto ATSAML11D15A-YU
Brand Microchip Technology Microchip Technology
Package 24-pin SSOP 24-pin SSOP - same
CPU Core Arm Cortex-M23 Arm Cortex-M23
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 32 KB 32 KB
SRAM 8 KB 8 KB
Operating Voltage Range 1.62 V to 3.63 V 1.62 V to 3.63 V
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C
Number of I/O Pins 17 17
Serial Interfaces I2C, SPI, UART I2C, SPI, UART
Security Support TrustZone, crypto accelerator, secure key storage, tamper resistance TrustZone, crypto accelerator, secure key storage, tamper resistance

Principais diferenciais

  • Higher temperature rating within the same SSOP family (vs ATSAML11D15A-YU)
  • Core and memory alignment for direct board reuse (vs ATSAML11D15A-YU)
  • Low-power security in an accessible package (vs ATSAML11D15A-YU)

Notas de projeto

Estimated: the device consumes less than 25 uA/MHz in active mode according to Microchip, so operation at 32 MHz corresponds to less than 800 uA from the stated active-mode figure before peripheral and I/O loading is added. Use this value only as an initial power-budget estimate. Select the final operating clock and enable only required peripherals, then verify actual current in the manufacturer operating-mode characteristics.

Place the device's supply-decoupling capacitors immediately adjacent to the supply and ground pins, and keep high-current switching loops away from analog inputs. The 24-pin SSOP footprint simplifies prototype soldering but leaves relatively wide, exposed routing channels; route serial signals away from switching nodes and provide a short ground return for analog references. Follow the manufacturer package drawing and recommended-layout guidance for exact land geometry.

Do not substitute ATSAML11D15A-YU for ATSAML11D15A-YF without checking the maximum assembly and ambient temperature. The -YF reaches +125 °C, whereas the -YU is identified for +85 °C. Also confirm the selected firmware's required peripheral instances, clock configuration, security provisioning, and pin-mux assignments. A matching package alone does not guarantee that every board-level requirement is satisfied.

Assign the pin multiplexer before laying out the PCB because the 17 I/O pins support multiple peripheral functions and not every UART, SPI, I2C, ADC, DAC, comparator, or op-amp signal can be used simultaneously. Create a firmware-to-pin matrix, reserve programming and debug functions, and verify the 24-pin SSOP pad dimensions against the current Microchip package drawing before fabrication.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page identifies the ATSAML11D15A family and its security capabilities. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated for this exact order code.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ATSAML11D15A-YF datasheet ATSAML11D15A-YF pinout ATSAML11D15A-YF specifications Microchip ATSAML11D15A-YF ATSAML11D15A 24-SSOP ATSAML11D15A-YF Cortex-M23 ATSAML11D15A-YF TrustZone ATSAML11D15A-YF replacement ATSAML11D15A-YF equivalent ATSAML11D15A-YF vs ATSAML11D15A-YU ATSAML11D15A-YF price ATSAML11D15A-YF stock ATSAML11D15A-YF schematic ATSAML11D15A-YF footprint

Componentes & termos relacionados

Microchip Technology ATSAML11D15A-YF ATSAML11D15A-YU SAM L11 Arm Cortex-M23 32-bit microcontroller embedded microcontroller microcontroller IC semiconductor 32 KB flash memory 8 KB SRAM 32 MHz clock 24-pin SSOP SSOP package family surface-mount package Arm TrustZone Technology crypto accelerator secure key storage tamper resistance SERCOM UART SPI I2C ADC DAC operational amplifier AC comparator low-power embedded control IoT sensor node
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ