ATTINY11-6SI - 8-Bit 6MHz AVR MCU | Microchip | Embedded
N.º da peça: ATTINY11-6SI ✗ Fim de vidaATTINY11-6SI Visão geral
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripheral functions into one device. The ATTINY11-6SI belongs to the AVR microcontroller family and the broader hierarchy of 8-bit embedded processors, embedded controllers, and semiconductors. Its compact body and modest memory footprint make it appropriate for simple control, signal-generation, and state-machine tasks rather than general-purpose computing.
The principal features are 1KB flash program memory, 6MHz maximum clock speed, an internal oscillator, and an 8-pin SOIC package. The 512 x 16-bit organization provides sixteen program words per row while retaining a compact 1KB total capacity. A 5V operating supply supports integration with conventional 5V logic systems. The 8-pin surface-mount package reduces board area compared with larger through-hole controllers.
Internally, the device uses an AVR RISC architecture with an 8-bit CPU core. This architecture is suited to instruction-efficient embedded control, while the internal oscillator removes the need for an external clock source in straightforward designs. Because program memory is only 1KB, firmware should use compact routines and avoid unnecessary library overhead. Peripheral and memory details must be confirmed in the manufacturer datasheet before assigning a new PCB footprint.
Typical uses include simple sequence controllers, timer-based industrial controls, compact sensor interfaces, LED status indicators, and auxiliary control functions embedded in larger equipment. It can also serve as a low-cost controller for a small keypad interface or fixed-function peripheral where the firmware remains below the available 1KB program capacity. It is less suitable for networking, large protocol stacks, or applications requiring substantial data storage.
Design the supply decoupling and signal layout around the manufacturer application recommendations, keeping the power path compact and the oscillator-sensitive traces short. Confirm the exact pin assignments in the pin-description table before routing the PCB. If firmware growth is uncertain, choose a controller with more flash and SRAM rather than depending on last-minute code optimization.
This page combines the exact device characteristics with pinout, programming, packaging, replacement, and design guidance. It also separates true drop-in alternatives from parts with different clock, memory, or package characteristics so engineers can evaluate replacement decisions without relying on family-name similarity alone.
Alternativas drop-in para ATTINY11-6SI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATTINY11-6SI (mesmo formato e footprint) — diferindo em Architecture, Package.
ATTINY11-6SC
✅ Drop-InConsulte o preço
Ver ficha técnica →ATTINY11-6SI Classificações máximas e características elétricas
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| Architecture | AVR |
| CPU Bit Width | 8 bit |
| Maximum Clock Speed | 6 MHz |
| Flash Memory | 1 KB |
| Flash Memory Organization | 512 x 16 bits |
| Tensão de alimentação de operação | 5 V |
| Oscillator | Internal oscillator |
| Encapsulamento | 8-pin SOIC |
| Tipo de montagem | Surface mount |
| Design Standard | EIAJ |
| Program Memory Type | Flash |
Guia de Configuração de Pinos do ATTINY11-6SI 8-pin soic
Configuração de pinos para ATTINY11-6SI (pacote 8-pin soic). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para ATTINY11-6SI.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ATTINY11-6SI é adequado para 6 aplicaçãos: Compact Sequence Controller, LED Status and Indicator Control, Timer-Based Utility Controller, Simple Keypad Interface, Basic Sensor Signal Conditioning, Auxiliary Embedded Control Function.
Compact Sequence Controller
The ATTINY11-6SI can implement a compact sequence controller for equipment that advances through a fixed operating sequence. Its 1KB flash capacity is sufficient for short state-machine routines, while the 6MHz AVR RISC core provides predictable instruction execution for timer and input-processing tasks. The internal oscillator removes the need for an external clock in a straightforward circuit. Keep firmware concise, use the manufacturer pin-description table for every I/O assignment, and confirm that the industrial temperature designation covers the enclosure's worst-case ambient condition.
Recomendado
LED Status and Indicator Control
The ATTINY11-6SI is appropriate for simple LED status indication, blinking, and sequencing functions where only a small number of outputs and a short instruction sequence are required. Its 8-bit AVR architecture can manage timed patterns without an external timing controller, and the 8-pin SOIC package conserves board area. Firmware must remain within the 1KB program-memory limit. Use current-limiting resistors and confirm the available output-drive ratings in the manufacturer electrical-characteristics table before assigning loads.
Recomendado
Timer-Based Utility Controller
A timer-based appliance, pump controller, or auxiliary equipment subsystem can use the ATTINY11-6SI to coordinate fixed delays and discrete output events. The 6MHz maximum clock speed supports straightforward timing routines, and the internal oscillator reduces the external component count. Because the controller has only 1KB of flash, avoid large frameworks and implement timing with compact counters. Validate timing tolerance across the complete operating-voltage and temperature ranges, and use the -SI industrial-grade option when elevated ambient temperatures are expected.
Recomendado
Simple Keypad Interface
The ATTINY11-6SI can scan a small keypad or decode a limited set of switches for front-panel control. Its limited 8-pin package and 1KB program memory suit installations where only a few inputs and outputs are needed, while the 6MHz core handles debouncing and command mapping efficiently. Use the exact pin assignments from the manufacturer datasheet and account for any programming-interface pins required during programming. Add external pull resistors where the application requires defined inactive switch levels.
Recomendado
Basic Sensor Signal Conditioning
For a basic sensor node, the ATTINY11-6SI can read limited digital signals, apply thresholds, and report a compact status through discrete outputs. It is best suited to sensors that do not require high-resolution conversion, large data buffering, or a network protocol stack. The internal oscillator simplifies the analog and digital layout, although the 1KB program-memory ceiling requires careful firmware sizing. Verify the available I/O count and analog-comparison resources in the manufacturer datasheet before committing to this architecture.
Recomendado
Auxiliary Embedded Control Function
The ATTINY11-6SI can act as an auxiliary controller in a larger appliance, handling a local sequence, watchdog-style task, or fixed set of outputs without sharing the main processor's memory and firmware. Its 8-pin SOIC package can be placed close to the controlled subsystem, and the 6MHz AVR core provides ample capability for small deterministic tasks. Avoid designs that may expand into multi-protocol communication or buffer-intensive processing. Maintain a firmware budget below 1KB and verify startup and I/O behavior in the manufacturer's system notes.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATTINY11-6SI — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATTINY11-6SC |
|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology |
| Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Maximum Clock Speed | 6 MHz | 6 MHz |
| Flash Memory | 1 KB | 1 KB |
| Flash Organization | 512 x 16 bits | 512 x 16 bits |
| Operating Supply Voltage | 5 V | 5 V |
| Oscillator | Internal oscillator | Internal oscillator |
| Temperature Grade | Industrial grade indicated by -SI suffix | Commercial grade indicated by -SC suffix |
| Mounting Type | Surface mount | Surface mount |
Principais diferenciais
- Industrial temperature-grade ordering option (vs ATTINY11-6SC)
- Minimal flash footprint for fixed functions (vs ATTINY11-6SC)
- Same-package replacement path within the ATTINY11 family (vs ATTINY11-6SC)
Notas de projeto
Route power and decoupling connections directly to the device pins and place the manufacturer-recommended bypass capacitor close to the supply entry. The 8-pin SOIC footprint leaves little room for unrelated signal routing, so establish the pin-description table before schematic capture. Keep programming-interface access available if the assembled board must be programmed in circuit, and verify package orientation against the manufacturer drawing.
Design the 5V supply for clean startup and acceptable transient performance because the internal oscillator and core behavior depend on a stable supply. Confirm the device's electrical limits, I/O drive capability, and required decoupling directly in the manufacturer datasheet. Do not assume that every 5V output or logic input has the same voltage threshold; use the published limits when interfacing with another controller.
The principal design risk is exceeding the 1KB flash-memory budget. Track compiled program size from the first firmware revision, avoid bulky runtime libraries, and avoid reserving unplanned flash for later features. Also verify that the industrial temperature requirement of ATTINY11-6SI is necessary; if it is not, ATTINY11-6SC preserves the principal electrical and package characteristics for a commercial-temperature design.
Keep the compact controller close to the switches or controlled outputs it serves to minimize trace length and improve noise immunity. Maintain a clean ground return, avoid routing switching nodes near programming or timing-sensitive inputs, and follow the manufacturer recommended decoupling layout. Where a sensitive analog input is used, separate analog and digital return paths where practical and validate the complete board rather than relying only on simulation.
Informações de conformidade
The exact declaration for the ATTINY11-6SI package was not identified in the cited material. Obtain current manufacturer or lot-specific documentation before making a compliance declaration.