C8051F315 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
N.º da peça: C8051F315 ✓ AtivoC8051F315 Visão geral
An 8-bit microcontroller is a compact embedded-control device whose processor, memory, peripherals, and I/O are integrated on one semiconductor die. The C8051F315 belongs to the C8051F31x family, which combines the established 8051 instruction set with mixed-signal processing and factory-programmable Flash. It is suited to applications where local control, analog measurement, and modest communication requirements matter more than the computational capacity of a 32-bit MCU.
The device's 25 MHz operating frequency provides a 25 MIPS-class execution rate according to the published product information. Its 8 kB Flash supports in-system programming, while 1.25 kB of RAM provides working memory for control logic, buffers, and stack operations. Twenty-five I/O pins allow external sensors, actuators, displays, and digital interfaces to be connected without a separate input/output expander.
The C8051F315 integrates an analog-to-digital converter and two comparators directly into the MCU. These resources reduce external component count in control systems that compare analog thresholds or acquire sensor data. Four 16-bit timers provide greater timing resolution than basic 8-bit counters, making the device suitable for periodic sampling, pulse measurement, PWM generation, and motor or actuator timing functions.
Typical uses include industrial sensor controllers, compact motor-control modules, building automation nodes, power-supply monitoring, LED and lighting controllers, and small embedded instruments. The 5 x 5 mm QFN package supports space-constrained designs, but its exposed-pad construction requires careful PCB layout and adequate thermal copper to dissipate heat reliably.
Designers should verify the complete pin multiplex, exposed-pad connection, voltage limits, and peripheral assignments in the manufacturer datasheet before layout. The compact land pattern also demands short analog and digital return paths, local decoupling, and controlled high-impedance analog routing to preserve measurement accuracy.
This product page consolidates manufacturer specifications, distributor listings, package information, application guidance, and verified design considerations. It also distinguishes confirmed C8051F31x family data from unknown electrical details rather than estimating values that require datasheet confirmation.
Alternativas drop-in para C8051F315 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com C8051F315 (mesmo formato e footprint) — diferindo em Package, Flash Memory, Microcontroller Type, Program Memory Type.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasC8051F315 Classificações máximas e características elétricas
| Microcontroller Type | 8-bit mixed-signal microcontroller |
| Processor Core | 8051 core |
| Frequência máxima de clock | 25 MHz |
| Maximum Instruction Rate | 25 MIPS |
| Flash Memory | 8 kB (8K x 8) |
| RAM | 1.25 kB |
| Number of I/O Pins | 25 |
| ADC | On-chip ADC |
| Comparators | 2 |
| Timers | 4 x 16-bit |
| Communication Interfaces | On-chip additional communication interfaces |
| Power-On Reset | On-chip |
| VDD Monitor | On-chip |
| Watchdog Timer | On-chip |
| Encapsulamento | 28-QFN (5 x 5 mm), exposed pad |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do C8051F315 28-qfn (5 x 5 mm), exposed pad
Configuração de pinos para C8051F315 (pacote 28-qfn (5 x 5 mm), exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para C8051F315.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
C8051F315 é adequado para 6 aplicaçãos: Industrial Sensor Controller, Compact Motor-Control Module, Building Automation Node, LED Lighting Controller, Power-Supply Monitor, Embedded Measurement Instrument.
Industrial Sensor Controller
The C8051F315 fits compact sensor-conditioning and supervisory nodes because it combines a 25 MHz 8051 core with 8 kB Flash, 1.25 kB RAM, an on-chip ADC, two comparators, and 25 I/O pins. The MCU can sample analog inputs, evaluate thresholds locally, and update actuators without a separate processor or analog interface IC. Its four 16-bit timers also support periodic acquisition and timed control functions. The trade-off is limited memory: 8 kB of Flash and 1.25 kB of RAM require disciplined firmware sizing, especially when adding fieldbus protocols or local data logging.
Compact Motor-Control Module
The C8051F315 is appropriate for small motor or actuator-control modules where four 16-bit timers can generate precise timing references and the 25 available I/O pins can connect sensors, switches, and drive-control signals. Its 25 MIPS-class execution capability provides enough control bandwidth for straightforward closed-loop routines, while the ADC and comparators can monitor position or current-related analog signals. Designers must verify the motor's electrical requirements and external driver architecture because no integrated bridge output is confirmed in the supplied data.
Building Automation Node
A small building-automation endpoint can use the C8051F315 to manage mixed digital and analog inputs at 25 MHz while remaining within a compact 5 x 5 mm footprint. The 25 I/O pins support keys, relays, status indicators, and digital sensors, while the ADC and two comparators can handle environmental or occupancy measurements. Its 1.25 kB RAM is adequate for modest state handling, but firmware must remain below the 8 kB Flash limit. A communications interface should be selected only after confirming the required protocol and peripheral mapping in the manufacturer documentation.
LED Lighting Controller
The C8051F315 can act as a local LED or illumination controller because its four 16-bit timers support PWM-style timing and its 25 I/O pins leave ample connections for drivers, switches, and status feedback. The 25 MHz core can execute dimming schedules and input processing while the ADC provides a path for analog dimming or current-feedback measurement. Because the verified data does not confirm a dedicated PWM peripheral or LED-driving outputs, engineers must examine the pin multiplex and use external transistor or LED-driver circuitry when required.
Power-Supply Monitor
The C8051F315 is suitable for a compact power-supply supervisory circuit when the system needs local voltage measurement, threshold comparison, fault reporting, and communication. The on-chip ADC, two comparators, VDD monitor, watchdog timer, and power-on reset provide a useful foundation for a supervisory controller. It can monitor operating conditions and trigger a remote fault signal through available I/O. The application must still comply with the C8051F315's confirmed operating-voltage range, which is not specified in the supplied excerpts and must be checked before implementation.
Embedded Measurement Instrument
For a compact instrument or low-channel measurement product, the C8051F315 provides a 25 MHz control core, an ADC, two comparators, four 16-bit timers, and 25 I/O lines within a small 28-QFN package. These resources suit threshold detection, periodic sampling, elapsed-time measurement, and local control of a display or data interface. Its limited 1.25 kB RAM and 8 kB Flash make it more appropriate for targeted measurements than complex waveform analysis or large data buffers. Analog grounding and exposed-pad thermal management remain critical design tasks.
Dados de referência de engenharia para C8051F315 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Package | 28-QFN (5 x 5 mm), exposed pad |
| Brand | Silicon Labs |
| Microcontroller Type | 8-bit mixed-signal microcontroller |
| Processor Core | 8051 core |
| Maximum Clock Frequency | 25 MHz |
| Maximum Instruction Rate | 25 MIPS |
| Flash Memory | 8 kB (8K x 8) |
| RAM | 1.25 kB |
| Number of I/O Pins | 25 |
| Analog Resources | 1 ADC and 2 comparators |
Principais diferenciais
- Combines digital control and mixed-signal resources (vs Basic 8-bit microcontrollers without integrated analog conversion)
- Provides four dedicated 16-bit timing resources (vs 8-bit microcontrollers limited to basic counter widths)
- Balances control performance with compact integration (vs Larger multi-pin 8-bit MCU packages)
Notas de projeto
Use the manufacturer's 28-QFN land pattern and thermal-via recommendations rather than generating the footprint from the 5 x 5 mm body dimensions alone. The exposed pad is a critical thermal and electrical feature. Place input and output decoupling capacitors close to their associated supply pins, keep the ground plane continuous under the device, and route analog inputs away from high-current switching nodes.
Connect the exposed pad to the recommended ground or thermal construction shown in the manufacturer package documentation and provide enough copper area and vias to dissipate internal heat. Before calculating junction temperature, obtain the device-specific core, I/O, and analog-peripheral current limits. The supplied web data confirms the exposed-pad package but does not provide thermal resistance or maximum power values.
Keep analog sensor traces short, guarded where appropriate, and isolated from digital return currents and switching-power nodes. The ADC and comparators can share the analog ground domain, but high-current outputs should not force return current through sensitive signal paths. Confirm the selected alternate-function pins and their analog specifications in the manufacturer datasheet before finalizing routing.
Do not assume that every C8051F31x family member is pin-compatible merely because several devices use a 28-QFN package. Verify the complete pinout, multiplexed peripheral assignments, memory size, voltage range, and exposed-pad connection for any proposed substitute. The C8051F315-GM ordering variant may represent the same device family, but suffix-specific qualification and packing requirements must be checked before substitution.
Informações de conformidade
The supplied manufacturer and distributor snippets do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. The MCU is not presented as an automotive-qualified AEC-Q100 product by the available evidence.
