C8051F584-IQ - 50MHz 96KB Flash CAN/LIN MCU | Silicon Labs
N.º da peça: C8051F584-IQ ✓ AtivoC8051F584-IQ Visão geral
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripheral interfaces, and I/O into one device. The C8051F584-IQ belongs to the 8-bit MCU → 8051 microcontroller → embedded processing → semiconductor hierarchy. Its combination of deterministic timers, communication peripherals, and in-system programmability makes it suitable for compact controllers that must coordinate sensors, actuators, and vehicle or industrial networks.
Key features include 96 KB of Flash for firmware, 8.25 KB of RAM, a 24 MHz system clock with 50 MIPS throughput, and 40 I/O lines. Integrated communication includes CAN 2.0, LIN 2.1, SPI, I2C/SMBus, and two UART/USART ports. Six 16-bit timer/counters, two PCA modules, a watchdog timer, programmable interrupts, and an RTC support event timing, motor or actuator control, and supervisory functions.
The device combines a high-speed 8051-compatible execution engine with dedicated serial controllers and external-memory interfaces. In-system programmability simplifies development and field updates, while the 48-pin TQFP package exposes substantially more I/O than smaller 32-pin and 40-pin C8051F58x options. Engineers should still account for package-specific routing, clock configuration, decoupling, and peripheral-pin multiplexing when laying out the PCB.
Typical applications include CAN and LIN body-control modules, automotive climate-control units, industrial monitoring equipment, serial gateways, industrial sensors, and compact automation controllers. The C8051F584-IQ is especially relevant when one device must manage multiple serial protocols while retaining sufficient Flash for protocol stacks and application firmware.
For a new design, use the manufacturer’s pin-description table and recommended decoupling network to assign every signal and validate the selected external clock and memory configuration. Confirm that the industrial-temperature grade, supply-voltage limits, peripheral multiplexing, and programming requirements meet the product’s environmental and functional-safety needs before releasing the schematic.
This page organizes the C8051F584-IQ specifications, application guidance, package information, comparison parameters, and practical design considerations into a focused engineering reference for MCU selection and board integration.
Alternativas drop-in para C8051F584-IQ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
C8051F585-IQ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
C8051F586-IQ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
C8051F582-IQ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
C8051F583-IQ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
C8051F584-IQ Classificações máximas e características elétricas
| Product Type | 8-bit 8051 automotive and industrial microcontroller |
| Maximum System Clock | 50 MHz |
| Maximum Throughput | 50 MIPS |
| Internal System Clock | 24 MHz |
| Flash Program Memory | 96 KB |
| Total RAM | 8.25 KB |
| Data RAM | 256 bytes |
| External Data Memory | 8 KB |
| I/O Lines | 40 |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Serial Interfaces | SPI, I2C/SMBus, and 2 UART/USART |
| Timer/Counters | 6 16-bit timer/counters |
| Programmable Counter Arrays | 2 modules with 12 compare/capture channels |
| Interrupt Levels | 2 |
| Interrupt Sources | 23 |
| Tensão de alimentação | 5 V |
| Encapsulamento | 48-pin TQFP, 7 mm x 7 mm |
| Tipo de montagem | Surface mount |
| Programming | In-system programmable |
| Watchdog Timer | Yes |
| Real-Time Clock | Yes |
| Status RoHS | Compliant |
| Lead-Free Status | Lead-free |
Guia de Configuração de Pinos do C8051F584-IQ 48-pin tqfp, 7 mm x 7 mm
Configuração de pinos para C8051F584-IQ (pacote 48-pin tqfp, 7 mm x 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para C8051F584-IQ.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
C8051F584-IQ é adequado para 6 aplicaçãos: Automotive CAN Body-Control Module, Industrial Sensor Gateway, LIN Sub-Gateway, Industrial Motor and Valve Controller, Serial Protocol Converter, Test and Measurement Data Controller.
Automotive CAN Body-Control Module
The C8051F584-IQ fits an automotive body-control module because it combines a CAN 2.0 controller with a 50 MHz execution rate and 40 I/O lines. It can coordinate switches, lamps, sensors, and actuators while retaining 96 KB of Flash for control logic and communication routines. A LIN 2.1 controller also supports low-cost vehicle sub-networks, and the six 16-bit timers support periodic input sampling and output timing. Place the MCU in a 48-pin TQFP footprint and verify pin multiplexing, clock configuration, reset behavior, and decoupling in the manufacturer application guidance.
Recomendado
Industrial Sensor Gateway
The C8051F584-IQ is suitable for an industrial sensor gateway that must connect sensors using several serial protocols. SPI can serve high-speed local sensors, I2C/SMBus supports lower-speed devices, and two UARTs provide additional host or field-bus links. With 96 KB of Flash and 8.25 KB of RAM, the device can combine acquisition logic, protocol conversion, and local diagnostics in one controller. The 50 MHz clock gives deterministic processing headroom, while 40 I/O lines support status indicators, configuration inputs, and alarm outputs. Validate industrial temperature, supply tolerance, isolation boundaries, and bus termination in the final design.
Recomendado
LIN Sub-Gateway
The C8051F584-IQ can serve as a LIN 2.1 sub-gateway between LIN-connected peripherals and a higher-level CAN network. Its integrated LIN and CAN controllers avoid separate communication devices, while 40 I/O lines provide enough external control and diagnostic signals for compact gateways. The six 16-bit timer/counters are useful for periodic LIN scheduling and debounce or timeout functions, and the watchdog timer supports unattended operation. Firmware should validate timing, baud-rate tolerance, wake-up behavior, and fault handling. PCB routing should keep CAN and LIN paths away from sensitive analog signals and follow the manufacturer’s decoupling guidance.
Recomendado
Industrial Motor and Valve Controller
The C8051F584-IQ is appropriate for compact industrial motor or valve control where deterministic timing, serial diagnostics, and multiple I/Os are required. Its 50 MHz execution rate supports state-machine control, while six 16-bit timers can generate PWM-related timing, capture feedback edges, and measure intervals. Two PCA modules provide 12 compare/capture channels for additional timing channels, and the 40 I/O lines can connect position sensors, limit switches, and driver-control signals. The 96 KB of Flash supports application and diagnostic code. Confirm output rise times, isolation needs, thermal margins, and external driver circuitry because the MCU controls rather than directly powers the load.
Recomendado
Serial Protocol Converter
The C8051F584-IQ fits a serial protocol converter because it integrates two UART/USART ports, SPI, I2C/SMBus, CAN 2.0, and LIN 2.1. Firmware can translate between industrial and automotive network formats without a separate processor for each interface. Its 96 KB Flash capacity accommodates protocol handlers and configuration tables, and 8.25 KB RAM provides working space for frame buffering. The 50 MHz execution rate supports simultaneous traffic handling and diagnostics. Designers should verify the electrical levels used by each external bus, select appropriate transceivers where required, and reserve programming and debug access without introducing ground-current paths into communication interfaces.
Recomendado
Test and Measurement Data Controller
The C8051F584-IQ can act as a data-acquisition and instrument-control core in compact test equipment. Its 40 I/O lines support digital stimulus and response channels, while the six 16-bit timers and 12 PCA capture channels can measure pulse widths, periods, and event timing. UART, SPI, and I2C/SMBus provide paths to displays, memory devices, sensors, and host computers. At up to 50 MIPS, the MCU can combine acquisition sequencing with local calculations and diagnostics. Designers should define input thresholds, use appropriate external level conversion, budget sampling latency, and follow the manufacturer’s grounding and decoupling recommendations to preserve measurement accuracy.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para C8051F584-IQ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | C8051F585-IQ | C8051F586-IQ | C8051F582-IQ | C8051F583-IQ |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) | 48-pin TQFP (7 mm x 7 mm) |
| CPU Architecture | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Maximum Clock | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
Principais diferenciais
- Integrated automotive and industrial communication controllers (vs C8051F585-IQ)
- Large program-memory configuration (vs C8051F582-IQ)
- Broad timing and I/O resources (vs C8051F586-IQ)
Notas de projeto
Route the 48-pin TQFP footprint exactly to the manufacturer package drawing and reserve access to the programming and debug signals. Place the required input and output capacitors close to their designated supply pins, with the shortest practical return path to the power and ground planes. Review the pin-multiplexing table before assigning CAN, LIN, SPI, I2C, UART, timer, and oscillator functions because several peripheral assignments may compete for the same I/O pins.
The C8051F584-IQ operates from a 5 V supply and can execute at 50 MHz, so the regulator and decoupling network must support the maximum transient current permitted by the device. Use the manufacturer electrical-characteristics table to establish operating, sleep, and I/O current limits. Estimate worst-case regulator dissipation from the actual output voltage, supply voltage, and load, then allow adequate copper area and thermal margin for the selected ambient temperature.
Do not treat every C8051F58x ordering code as electrically and firmware interchangeable. A same-package replacement can differ in Flash, RAM, peripheral availability, interrupt assignment, or clock configuration even when the TQFP land pattern is unchanged. Before substitution, compare the device selection tables, validate the boot and linker configuration, rebuild the firmware, and exercise every communication peripheral used by the product.
Keep CAN, LIN, UART, SPI, and I2C routing away from clocks, sensitive sensor inputs, and switching-power-node areas. Match communication traces to the impedance and termination requirements of the selected bus, use continuous ground references, and avoid long unprotected branches. Confirm connector, transceiver, and isolation components separately because the microcontroller pins are digital and do not replace bus transceivers or protection devices.
Informações de conformidade
RoHS-compliant and lead-free status is identified for C8051F584-IQ. No additional qualification or conflict-minerals statement was established.