CD4046BPW - 2.4MHz CMOS Micropower PLL | Texas Instruments
N.º da peça: CD4046BPW ✓ AtivoCD4046BPW Visão geral
A phase-locked loop, or PLL, is a feedback-control system in which an internal oscillator is tuned until its phase and frequency match a reference input. The CD4046B family belongs to the broader clock and timing hierarchy: phase-locked loop -> frequency synthesis and control -> clock and timing integrated circuit -> semiconductor. Its combination of a VCO and phase-detection functions allows one device to perform synchronization, frequency multiplication, frequency division, demodulation, and frequency comparison functions.
The principal functional blocks support two phase-comparison methods. The circuit can operate with a phase comparator for applications requiring zero or 180-degree phase relationships, or with a frequency comparator for lock-range and frequency-synthesis work. The VCO provides the controllable oscillation source, while the comparator and amplifier paths sense the relationship between the external reference and internal oscillator signals. An externally supplied control voltage can therefore determine the oscillator operating point within the device's operating limits.
The micropower CMOS implementation is suited to low-power control and signal-processing systems where the operating supply must remain low and circuit area is constrained. The 16-TSSOP package provides a surface-mount option for compact industrial, instrumentation, communications, and control equipment. The 2.4 MHz frequency designation identifies the upper operating capability highlighted for this ordering variant and should be checked against the specific VCO configuration, supply voltage, and timing conditions used in the target design.
Typical uses include frequency synthesis, clock recovery, tone generation, tracking loops, FM or phase-sensitive demodulation, frequency multiplication and division, and general closed-loop frequency-control systems. In these applications, the reference signal enters the comparator path while the VCO produces the adjustable internal signal. Loop filtering and output routing then determine whether the application behaves as a multiplier, divider, synchronizer, or demodulator.
Design should begin with the manufacturer's phase-comparator and VCO application guidance. Verify the selected comparator mode, feedback topology, VCO free-running frequency, supply range, and external component values before layout. Keep the timing network and loop-filter components close to their associated pins, maintain a stable ground reference, and route the oscillator and feedback paths away from noisy switching nodes to reduce unintended coupling.
This product page combines the package and frequency information, functional architecture, alternative-device analysis, comparison parameters, and practical design guidance in one engineering-focused reference. It also distinguishes package-compatible choices from parts that require a different footprint, helping designers avoid treating a functionally similar PLL as a true PCB drop-in replacement.
Alternativas drop-in para CD4046BPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasCD4046BPW Especificações
| Device Type | CMOS micropower phase-locked loop (PLL) |
| Maximum Frequency | 2.4 MHz |
| Encapsulamento | 16-TSSOP, 0.173 inch (4.40 mm) width |
| Technology | CMOS |
| Integrated VCO | Yes, low-power linear voltage-controlled oscillator |
| Phase Comparator Count | 2 |
| Signal Input Amplifier | Common input amplifier |
| Comparator Input | Common comparator input |
| On-Chip Zener Regulator | 5.2 V |
| Power Class | Micropower |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do CD4046BPW 16-tssop, 0.173 inch (4.40 mm) width
Configuração de pinos para CD4046BPW (pacote 16-tssop, 0.173 inch (4.40 mm) width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para CD4046BPW.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CD4046BPW é adequado para 6 aplicaçãos: Frequency Multiplication and Division, Clock Synchronization, Phase-Sensitive Demodulation, FM Signal Tracking, Precision Tone Generation, Industrial Frequency-Control Systems.
Frequency Multiplication and Division
The CD4046BPW fits frequency multiplication or division designs because its internal VCO and two phase comparators can be connected in different feedback configurations. According to the Texas Instruments CD4046B datasheet, the chip includes a low-power linear VCO, a common signal-input amplifier, and a common comparator input. Choose the appropriate comparator and feedback ratio, then design the loop filter around the intended lock range and multiplication factor. The 2.4 MHz capability provides useful headroom for clock and tone-generation stages where the desired output must be referenced to a lower-frequency stable source.
Recomendado
Clock Synchronization
The CD4046BPW can synchronize a locally generated clock or oscillator to an external reference when phase consistency is more important than free-running timing. According to the Texas Instruments CD4046B datasheet, the device provides two phase comparators and a common signal-input amplifier, allowing the design to select the comparator characteristic that best matches the required lock behavior. The external loop-filter components set acquisition and steady-state response, while the 16-TSSOP package keeps the implementation compact. Keep feedback routing short and verify pull-up or interface requirements for the selected output arrangement.
Recomendado
Phase-Sensitive Demodulation
The CD4046BPW is appropriate for phase-sensitive or frequency-sensitive demodulation because the comparator error path tracks the phase or frequency relationship between an input signal and the internal VCO. According to the Texas Instruments CD4046B datasheet, the two different phase comparators share a signal-input amplifier and common comparator input. Designers can select the comparator mode that best fits the modulation format, then use the loop bandwidth and output filtering to balance response speed against carrier rejection. Confirm supply and signal levels against the datasheet before connecting the external feedback network.
Recomendado
FM Signal Tracking
The CD4046BPW can be used in an FM tracking or demodulation loop where a voltage-controlled oscillator is continuously adjusted to follow the frequency of an incoming signal. According to the Texas Instruments CD4046B datasheet, the common signal-input amplifier and two comparator options support the phase-detection functions needed for closed-loop tracking. Component values around the VCO timing network and loop filter determine capture range, lock behavior, and audio-band response. Keep the loop bandwidth wide enough to follow the intended modulation but narrow enough to reject unwanted noise and adjacent channels.
Recomendado
Precision Tone Generation
The CD4046BPW supports tone-generation systems in which an internal oscillator is locked to a reference frequency and then multiplied or divided to obtain the desired output. According to the Texas Instruments CD4046B datasheet, the chip integrates a low-power linear VCO and two phase-comparator choices in a 16-TSSOP package. Use the comparator appropriate to the required locking characteristic and select timing components for the target frequency range. This arrangement is useful for audio test tones, communication test equipment, and low-power signal sources where phase stability matters more than free-running flexibility.
Recomendado
Industrial Frequency-Control Systems
The CD4046BPW is well suited to compact industrial controls that require a feedback oscillator locked to a process, sensor, or timing reference. According to the Texas Instruments CD4046B datasheet, the device provides a 2.4 MHz CMOS micropower PLL with two phase comparators in a surface-mount 16-TSSOP package. The low-power architecture can support portable test equipment or low-energy control modules, while the surface-mount package limits board area. Protect analog timing nodes from switching interference and establish the filter and grounding strategy before tuning the loop for dynamic response.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CD4046BPW — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Texas Instruments |
| Package | 16-TSSOP |
| Device Type | CMOS micropower phase-locked loop |
| Maximum Frequency | 2.4 MHz |
| Technology | CMOS |
| Voltage-Controlled Oscillator | Integrated low-power linear VCO |
| Phase Comparators | 2 |
| On-Chip Zener Regulator | 5.2 V |
| Signal Input Path | Common signal-input amplifier and common comparator input |
| Mounting Type | Surface mount |
Principais diferenciais
- Integrated dual-comparator PLL architecture (vs MC14046BCPG)
- Established 2.4 MHz operating-class indication (vs CD4046BE)
- Micropower CMOS integration (vs MC14046BCPG)
Notas de projeto
Place the VCO timing components and loop-filter parts close to the associated CD4046BPW pins, and keep the external feedback route short. The manufacturer datasheet identifies a low-power linear VCO and two phase comparators, so long traces around these blocks can increase parasitic coupling and disturb phase relationships. Route the oscillator and comparator paths away from switching-regulator outputs and high-current return paths, and use a continuous ground plane where practical.
Do not assume that a functionally similar PLL is a drop-in replacement. The CD4046BPW uses a 16-TSSOP package, while the cited MC14046BCPG comparison uses a different package. Before substitution, verify the numbered pin functions, supply limits, VCO frequency range, comparator modes, output drive, timing, and temperature grade. A footprint conversion may require new routing, a different feedback topology, and component-value changes.
Choose the phase-comparator operating mode and loop-filter bandwidth for the intended lock behavior rather than copying a generic filter network. The CD4046B architecture includes two different phase comparators with shared signal-conditioning paths. A filter optimized for frequency acquisition may be unnecessarily slow for phase tracking, while a very wide loop can increase noise or ripple sensitivity. Check lock range, capture range, and output jitter in the intended circuit configuration.
Informações de conformidade
The current manufacturer product page should be checked for material and environmental declarations applicable to the CD4046B PW ordering option.