CY7C65631-56LTXIT - 4-Port USB 2.0 Hub Controller, 480 Mb/s, 56-QFN
N.º da peça: CY7C65631-56LTXIT ✓ AtivoCY7C65631-56LTXIT Visão geral
A USB hub controller is a dedicated interface IC that sits between a USB host and multiple USB peripherals, managing enumeration, power distribution and transaction translation across a shared USB 2.0 bus. In the power-management hierarchy it sits at the interface tier: USB interface IC -> hub controller -> system connectivity silicon. The EZ-USB HX2LP family was designed for ultra-low-power applications where each downstream port must share a single transaction translator to minimize both silicon area and operating current.
Key features of this device include four downstream ports on one shared transaction translator, full-speed and high-speed (480 Mb/s) USB 2.0 operation, 3.3 V single-supply operation with about 163 mA of operating supply current, and an industrial temperature range of -40 C to +85 C. The controller supports downstream port overcurrent detection and enumeration of standard USB peripherals without requiring an external hub PHY.
The CY7C65631 is built on a CMOS process, and the datasheet states explicitly that it is pin-for-pin compatible with the CY7C65640 hub controller, which makes footprint planning straightforward across two related USB hub designs. A sibling variant, the CY7C65621, shares the same HX2LP family and 56-QFN footprint but targets different port counts.
Typical applications include multi-port USB hubs, laptop and desktop docking stations, set-top box and smart-TV connectivity, industrial human-machine interface panels, USB expansion cards for test and measurement equipment, and automotive infotainment accessories.
The main design consideration is power: because all four downstream ports share one transaction translator, hub current stays low, but the 3.3 V rail must still be sized for the worst-case combination of enabled ports and attached peripherals. Decoupling close to the QFN pads and careful D+/D- routing are equally important, since this controller must deliver clean 480 Mb/s signalling over short board-level traces.
This page consolidates ordering variants, pin-compatibility notes between the CY7C65621, CY7C65631 and CY7C65640 devices, drop-in alternatives and practical PCB design guidance that engineers would otherwise have to piece together from separate datasheets and cross-reference listings.
Alternativas drop-in para CY7C65631-56LTXIT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com CY7C65631-56LTXIT (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Package Type, Product Type, Device Type.
CY7C65631-56LTXC
✅ Drop-InConsulte o preço
Ver ficha técnica →CY7C65631-56LTXCT
✅ Drop-InConsulte o preço
Ver ficha técnica →CY7C65640A-LFXC
✅ Drop-InConsulte o preço
Ver ficha técnica →CY7C65621-56LTXIT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
CY7C65630-56LTXC
✅ Drop-InConsulte o preço
Ver ficha técnica →USB2514B-AEZC-TR
✅ Drop-InConsulte o preço
Ver ficha técnica →CY7C65631-56LTXIT Especificações
| Product Type | USB 2.0 Hub Controller (EZ-USB HX2LP Lite) |
| Downstream Ports | 4 |
| Transaction Translators | 1 (shared by all four ports) |
| USB Standard | USB 2.0 |
| Taxa de dados | 480 Mb/s (High Speed) |
| Tensão de alimentação | 3.3 V |
| Maximum Supply Voltage | 3.6 V |
| Operating Supply Current | 163 mA |
| Faixa de temperatura de operação | -40 C to +85 C |
| Encapsulamento | 56-QFN (8x8 mm) |
| Estilo de montagem | SMD/SMT |
| Process Technology | CMOS |
| Series | CY7C65631 |
| Product Category | USB Interface IC |
| Packaging Type | Cut Tape, Reel |
| Pin Compatibility | Pin-for-pin compatible with CY7C65640 |
| Family | EZ-USB HX2LP Lite Low Power USB 2.0 Hub Controller |
| Status do ciclo de vida | Active |
Guia de Configuração de Pinos do CY7C65631-56LTXIT 56-qfn (8x8 mm)
Configuração de pinos para CY7C65631-56LTXIT (pacote 56-qfn (8x8 mm)). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para CY7C65631-56LTXIT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CY7C65631-56LTXIT é adequado para 6 aplicaçãos: Laptop and Desktop Docking Stations, Industrial Human-Machine Interface Panels, Set-Top Box and Smart TV Connectivity, Automotive Infotainment Accessories, Test and Measurement USB Expansion Cards, External Storage and Media Dongle Hubs.
Laptop and Desktop Docking Stations
The CY7C65631-56LTXIT fits docking stations that expose several USB 2.0 ports to a host laptop while keeping board area and current draw low. Four downstream ports share one transaction translator, so a dock built around this controller presents full-speed and high-speed 480 Mb/s peripherals without the silicon cost of four independent translators. With a 3.3 V supply and roughly 163 mA of operating current, the hub leaves headroom on the dock's 5 V input budget, and the -40 C to +85 C range covers desk and mobile accessory environments where temperature cycling is common.
Recomendado
Industrial Human-Machine Interface Panels
Industrial HMI panels often need several USB peripherals - a touchscreen controller, a barcode scanner, a printer and a USB key - hung from one host port. The CY7C65631-56LTXIT gives the panel four downstream ports on a single shared transaction translator, which keeps both the controller silicon area and the hub's contribution to the 3.3 V supply current manageable inside a sealed enclosure. The -40 C to +85 C rating matches factory-floor ambient conditions, and 480 Mb/s high-speed operation allows storage devices and camera modules to run at full USB 2.0 speed.
Recomendado
Set-Top Box and Smart TV Connectivity
Set-top boxes and smart TVs increasingly expose USB ports for external storage, keyboards and service dongles, and the CY7C65631-56LTXIT lets a single internal USB 2.0 port feed four connectors. Because all four ports share one transaction translator, the hub adds only about 163 mA of operating current at 3.3 V, which matters in designs where the internal supply budget is already shared between the main SoC and video memory. The controller's high-speed 480 Mb/s path keeps external HDD playback and firmware updates fast while the compact 56-QFN (8x8 mm) footprint leaves board area for RF and video routing.
Recomendado
Automotive Infotainment Accessories
Infotainment head units often need to expose USB ports for phone charging, media playback and diagnostics, and the CY7C65631-56LTXIT provides four downstream ports with a single shared transaction translator for a compact, low-power hub block. The 3.3 V single-supply operation aligns with the regulated 3.3 V rails typically present in vehicle infotainment processors, and the -40 C to +85 C rating covers the cabin and console temperature range. For designs requiring a formally qualified automotive part number, specify the corresponding automotive-graded ordering option rather than the industrial suffix.
Recomendado
Test and Measurement USB Expansion Cards
Instrument front ends and lab peripheral cards frequently need to expose several USB connections to a PC while keeping the host side to a single port. The CY7C65631-56LTXIT gives four downstream ports at 480 Mb/s, which is sufficient for instrument control interfaces, probes and calibration dongles while keeping the 3.3 V supply current near 163 mA for the hub block. Its 56-QFN (8x8 mm) package suits dense instrument mainboards where connector space is limited, and the -40 C to +85 C range supports unheated and lightly heated laboratory equipment.
Recomendado
External Storage and Media Dongle Hubs
External enclosures that add several USB storage or media ports to a single USB connection are a natural fit for the CY7C65631-56LTXIT, because four downstream ports can share the available 480 Mb/s high-speed budget without each requiring a separate translator. The single-translator architecture limits the hub's contribution to operating current to about 163 mA at 3.3 V, which helps external enclosures meet bus-powered current limits and run cool during sustained transfers. The compact 56-QFN (8x8 mm) footprint also leaves room for the connector and drive-side circuitry inside small metal enclosures.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CY7C65631-56LTXIT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | CY7C65631-56LTXC | CY7C65631-56LTXCT | CY7C65640 | CY7C65621-56LTXIT | CY7C65630-56LTXC | USB2514B-AEZC-TR |
|---|---|---|---|---|---|---|---|
| Package | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) - same | 56-QFN (8x8 mm) - same | 56-QFN (8x8 mm) - same | 56-QFN (8x8 mm) - same | 56-QFN (8x8 mm) - same | 56-QFN (8x8 mm) - same footprint class |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Microchip Technology |
| Product Type | EZ-USB HX2LP Lite USB 2.0 hub controller | EZ-USB HX2LP Lite USB 2.0 hub controller | EZ-USB HX2LP Lite USB 2.0 hub controller | EZ-USB HX2LP USB 2.0 hub controller | EZ-USB HX2LP Lite USB 2.0 hub controller | EZ-USB HX2LP Lite USB 2.0 hub controller | USB 2.0 hub controller |
| Data Rate | 480 Mb/s (High Speed) | 480 Mb/s (High Speed) | 480 Mb/s (High Speed) | 480 Mb/s (High Speed) | 480 Mb/s (High Speed) | 480 Mb/s (High Speed) | 480 Mb/s (High Speed) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Pin Compatibility | Pin-for-pin compatible with CY7C65640 | Identical device, alternate ordering suffix | Identical device, alternate ordering suffix | Pin-for-pin compatible per family datasheet | Same family and footprint, verify per-pin use | Same family and footprint, verify per-pin use | Same footprint class, no manufacturer-published pin-for-pin cross-reference |
Principais diferenciais
- Four downstream ports served by one shared transaction translator (vs CY7C65621-56LTXIT)
- Documented pin-for-pin compatibility with the CY7C65640 (vs CY7C65640)
- Industrial temperature coverage on a low-power hub (vs USB2514B-AEZC-TR)
Notas de projeto
Informações de conformidade
No RoHS, REACH or conflict-minerals statement for this ordering option was located; confirm the current material compliance declaration with the manufacturer for the exact suffix before release.
