Infineon

CY8C3446AXI-098 - 50MHz 8-Bit PSoC 3 MCU | Infineon

N.º da peça: CY8C3446AXI-098 ✓ Ativo
100-pin TQFP Package 50 MHz Speed 64 KB (64K × 8 bits) Memory
MOQ: 1 |

CY8C3446AXI-098 Visão geral

The Infineon CY8C3446AXI-098 is an 8-bit PSoC 3 CY8C34xx programmable system-on-chip microcontroller with an 8051 core, 50 MHz operating frequency, 64 KB of embedded flash memory, and a 100-pin TQFP package measuring 14 mm by 14 mm. It combines a programmable embedded microcontroller with configurable analog and digital resources for compact embedded-control designs.

A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates a CPU, programmable digital blocks, analog blocks, and programmable I/O into one device. The CY8C34xx family belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and semiconductor categories. This integration can reduce the number of discrete components needed when a product requires both control logic and configurable signal conditioning.

The CY8C3446AXI-098 provides a maximum listed clock frequency of 50 MHz and 64 KB, or 64K × 8 bits, of flash memory. Its 8-bit CPU architecture is suited to embedded products requiring deterministic peripheral control, state-machine execution, communication handling, and low-cost system integration. The 100-pin TQFP-100 package also offers substantially more external connection options than smaller microcontroller packages.

The PSoC architecture differentiates this device from a conventional fixed-function 8-bit MCU through its configurable analog and digital blocks. Designers can allocate internal resources according to the application rather than relying exclusively on a fixed peripheral arrangement. This makes the device useful for products combining digital control with functions such as signal generation, measurement, interface adaptation, or general-purpose mixed-signal processing.

Typical uses include industrial control modules, sensor-conditioning systems, consumer interfaces, communication equipment, and compact embedded products. The 50 MHz operating rate provides useful execution headroom for protocol handling and coordinated peripheral activity, while the 64 KB flash capacity supports a substantial application program. System designers should still budget memory for the boot code, interrupt service routines, configuration data, and application logic.

For PCB design, use the manufacturer pin description and package drawing to assign all 100 signals and to place decoupling capacitance close to the supply pins. Confirm the intended clock source, programming interface, reset behavior, and unused-pin treatment in the manufacturer documentation before layout release. Because PSoC peripherals are configuration-driven, the final firmware and device configuration are integral parts of the hardware design.

This product overview combines the ordering information, memory and clock characteristics, package data, replacement analysis, and practical design considerations needed to evaluate the CY8C3446AXI-098 for an embedded mixed-signal design.

Alternativas drop-in para CY8C3446AXI-098 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

CY8C3446AXI-099

✅ Drop-In
📦 TQFP-100
Same 8051 core, 64 KB flash, and TQFP-100 package; -099 suffix may differ in speed or temperature grade by 0% to 10% pending ordering-table confirmation

📋 Alternativa de referência (fora do catálogo)

CY8C3446AXI-098 Classificações máximas e características elétricas

Product Type Programmable System-on-Chip (PSoC) Microcontroller
Product Family PSoC 3 CY8C34xx
CPU Architecture 8051 8-bit core
Frequência máxima de clock 50 MHz
Flash Memory 64 KB (64K × 8 bits)
Flash Memory Type Embedded flash
Programmable Architecture PSoC 3 mixed-signal architecture
Encapsulamento 100-pin TQFP
Package Dimensions 14 mm × 14 mm
Tipo de montagem Surface mount
Contagem de pinos 100 pins
Ordering Code CY8C3446AXI-098
Related Ordering Code CY8C3446AXA-098
Related Family Ordering Code CY8C3446AXI-099

Guia de Configuração de Pinos do CY8C3446AXI-098 14 mm × 14 mm

Configuração de pinos para CY8C3446AXI-098 (pacote 14 mm × 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 14 mm × 14 mm para CY8C3446AXI-098

Nenhum dado detalhado de pinagem disponível para CY8C3446AXI-098.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CY8C3446AXI-098 é adequado para 6 aplicaçãos: Industrial Embedded Control, Sensor Conditioning and Acquisition, Communication Interface Equipment, Consumer Control Interface, Programmable Signal Generator, Low-Power Embedded Product.

🏭

Industrial Embedded Control

The CY8C3446AXI-098 fits compact industrial control modules that require deterministic 8-bit processing, configurable mixed-signal resources, and ample package I/O. Its 50 MHz maximum clock provides useful throughput for coordinating digital state machines, communications, and multiple peripheral functions, while 64 KB of embedded flash accommodates application code, configuration, and interrupt routines. The 100-pin TQFP-100 package offers more connection opportunities than a small-lead-count MCU and can simplify boards that need several sensors, actuators, communications lines, or status indicators. For industrial deployment, confirm the exact operating-temperature grade, supply-voltage limits, and qualification requirements before committing the device to a long-life production design.

🧩

Sensor Conditioning and Acquisition

The PSoC 3 architecture makes the CY8C3446AXI-098 useful in sensor-conditioning systems where analog measurement and digital control must coexist on one board. Its configurable resources can support signal conditioning, thresholding, data acquisition, and control functions while the 8051 core manages sequencing and data handling. The 50 MHz clock rate leaves processing capacity for filtering and control tasks beyond simple switch reading, and 64 KB of flash can hold firmware plus device configuration information. A 100-pin TQFP package provides enough pins for sensors, references, communications, and digital I/O. Engineers should use the datasheet pin and peripheral tables to assign routing resources and verify that the required converter and interface functions fit the selected device configuration.

🌐

Communication Interface Equipment

The CY8C3446AXI-098 can serve as the control processor in communication interface equipment that combines protocol handling with configurable signal and I/O functions. Its 8-bit 8051 core is appropriate for byte-oriented protocol work, framing, state management, and supervisory logic, while the 50 MHz clock allows interrupt-driven communication routines to coexist with background tasks. The 64 KB flash capacity provides room for firmware and configuration, and the TQFP-100 package offers numerous pins for a transceiver interface, status indicators, controls, and diagnostics. For a production design, confirm the available serial interfaces, timing limits, and external clock requirements in the manufacturer documentation. The application is also suitable for adding programmable filtering or waveform conditioning without relying on a purely fixed-function MCU.

📱

Consumer Control Interface

For consumer products requiring compact user-interface control, the CY8C3446AXI-098 combines a 50 MHz 8-bit processor with programmable analog and digital resources in a 100-pin package. It can manage buttons, indicators, display interfaces, relays, and other mixed-signal control functions while reducing reliance on separate programmable components. The 64 KB flash capacity supports a dedicated application program and configuration data, and the broad package pin count provides flexibility for peripheral connections. The PSoC configuration model also enables product differentiation without changing the MCU package when control requirements evolve between model variants. Before layout, validate the selected digital and analog resources, power architecture, clock tolerances, and programming workflow. Firmware validation should include startup behavior, peripheral reconfiguration, brownout response, and the recovery strategy for field upgrades.

📺

Programmable Signal Generator

The CY8C3446AXI-098 is appropriate for programmable signal-generation modules because its PSoC architecture combines an 8051 control core with configurable functional blocks. The 50 MHz clock supports coordinated timing and digital control, while 64 KB of flash provides storage for sequences, settings, and firmware. The TQFP-100 package can accommodate output drivers, frequency references, amplitude or offset controls, communication lines, and status outputs in a compact design. A generator implementation can use programmable digital timing, digital-to-analog conversion, and control loops where those resources are available in the selected device configuration. Confirm the exact converter architecture, trigger behavior, output bandwidth, and routing constraints in the manufacturer documentation before fixing system requirements. PCB layout should isolate sensitive analog paths and provide clean grounding to preserve signal quality.

⚡

Low-Power Embedded Product

The CY8C3446AXI-098 can support compact embedded products that need programmable control, configurable mixed-signal functions, and a moderate code-memory footprint. Its 64 KB embedded flash avoids an external program-memory component, while the 8-bit architecture can be effective in duty-cycled control products where the processor is not continuously active. The TQFP-100 package provides substantial I/O capacity for low-power sensors, status controls, and communications. Actual power performance depends on the selected clock, active mode, sleep behavior, peripheral configuration, and operating voltage, so these details must be taken from the manufacturer datasheet rather than assumed. Design the power tree and decoupling around the device's verified supply requirements, and test wake, sleep, reset, and brownout behavior across the full product power sequence.

Resumo dos produtos recomendados

CY8C3446AXI-099 Same-family TQFP-100 device for design comparison Usado em: Industrial Embedded Control, Sensor Conditioning and Acquisition, Communication Interface Equipment, Consumer Control Interface, Programmable Signal Generator, Low-Power Embedded Product CY8C3446AXA-098 Closely related ordering-code variant listed for the same controller family Usado em: Industrial Embedded Control, Communication Interface Equipment, Programmable Signal Generator CY8C3446AXI-098 Infineon Usado em: Sensor Conditioning and Acquisition, Consumer Control Interface, Low-Power Embedded Product
What are the key specifications of CY8C3446AXI-098 that engineers should know?
The CY8C3446AXI-098 is an 8-bit PSoC 3 microcontroller with a 50 MHz maximum clock frequency, 64 KB of embedded flash, and a 100-pin TQFP package measuring 14 mm by 14 mm. Infineon describes it as part of the CY8C34xx family and uses an 8051 CPU core. The PSoC architecture adds configurable resources alongside the MCU core, making the device suitable for mixed embedded-control designs that need more integration than a basic fixed-function microcontroller.
Where can I download the CY8C3446AXI-098 datasheet PDF?
The CY8C3446AXI-098 datasheet is available through the linked manufacturer-family documentation and the indexed datasheet copy identified on this page. The document covers the PSoC 3 CY8C34 family, including the 8051 core, flash-programmable architecture, configurable blocks, package information, and electrical characteristics. Before releasing a PCB, use the exact ordering-code table and pin-description section to confirm device revision, package, and signal assignments.
Where can I find the CY8C3446AXI-098 pinout and package drawing?
The CY8C3446AXI-098 uses a 100-pin TQFP package with a 14 mm by 14 mm body size, but a complete authoritative pin-name list is not reproduced on this page. Use the manufacturer pin-description table and package drawing when assigning power, ground, clock, programming, and I/O connections. Request the current manufacturer documentation through the Request a Quote form on this page and identify the exact CY8C3446AXI-098 ordering code when requesting package information.
What does the CY8C3446AXI-098 replace in the same footprint?
The closest documented same-family option is the Infineon CY8C3446AXI-099, which also uses a 100-pin TQFP package and provides an 8051 core with 64 KB of flash. Its ordering suffix differs, so designers must compare temperature, speed grade, qualification, and datasheet-specific features before treating it as a drop-in substitution. Only one same-package family alternative was established, so a broader replacement list would not be technically defensible.
Is the CY8C3446AXI-099 a drop-in replacement for CY8C3446AXI-098?
The CY8C3446AXI-099 is a candidate drop-in replacement because it is an Infineon CY8C34xx device with an 8051 core, 64 KB of flash, and the same TQFP-100 package. However, the -098 and -099 ordering suffixes must be checked against the manufacturer ordering table for any grade or temperature distinction. Confirm the complete datasheet parameter table, PCB land pattern, and programmed-device requirements before production use.
Can the CY8C3446AXI-099 replace the CY8C3446AXI-098?
The CY8C3446AXI-099 can serve as a candidate replacement because both are 8051-based CY8C34xx devices with 64 KB flash in TQFP-100 packages. The key engineering concern is the ordering suffix, which may distinguish device speed, temperature, or qualification characteristics. Use the manufacturer ordering-information table to verify the exact suffix mapping, then compare programming, clock, and electrical limits before treating the substitution as production-safe.
When should I choose the CY8C3446AXI-098 instead of the CY8C3446AXI-099?
Choose the CY8C3446AXI-098 when the BOM and qualification records specifically require the -098 ordering suffix and its associated temperature or grade conditions. Choose the CY8C3446AXI-099 only after the manufacturer ordering table confirms equivalent electrical limits and environmental requirements. Both parts share the broad CY8C34xx architecture, 8051 core class, 64 KB flash configuration, and TQFP-100 package, so suffix-specific requirements should drive the final decision.
Is the CY8C3446AXI-098 suitable for industrial control applications?
The CY8C3446AXI-098 is technically suitable for many embedded-control applications because it combines an 8051 core, 50 MHz maximum clock, 64 KB flash, and configurable PSoC resources in a 100-pin package. Industrial suitability also depends on the device's specified operating-temperature range, supply limits, qualification status, and the surrounding interface protections. Those requirements are not fully stated on this page and must be checked in the manufacturer datasheet before deployment.
Where to buy CY8C3446AXI-098 online?
Use the Request a Quote form on this page to request CY8C3446AXI-098 availability, lot traceability, and shipment details. The form allows the request to identify the exact 100-pin TQFP ordering code rather than the closely related CY8C3446AXA-098 listing. For production procurement, also request the manufacturer date code, lot code, packaging form, and any applicable traceability documentation needed by your quality system.
What is the price of CY8C3446AXI-098?
The current commercial terms for CY8C3446AXI-098 are shown through the Request a Quote form on this page. The form is the appropriate route for a unit quote, volume pricing, stock status, and shipping options because commercial terms can change with quantity, date code, and packaging. Provide the required quantity, delivery region, and target date code with the request to obtain an actionable quotation.
What is the lead time and stock status for CY8C3446AXI-098?
Current lead time and stock status for CY8C3446AXI-098 should be requested through the Request a Quote form on this page. A complete answer depends on the requested quantity, date code, packaging option, and destination, none of which can be fixed without those inputs. Specify whether a standard date code is acceptable and include the required delivery schedule so the supplier can respond with a meaningful lead-time commitment.
Is CY8C3446AXI-098 in stock?
Stock confirmation for CY8C3446AXI-098 is available through the Request a Quote form on this page. Submit the quantity, packaging preference, acceptable date code, and delivery requirements to receive current availability information. For an active embedded-control program, also request lot traceability and change-notification details so an inventory allocation can be incorporated into the production plan.
What can replace the CY8C3446AXI-098?
The best-supported replacement candidate is the Infineon CY8C3446AXI-099, which shares the CY8C34xx family, 8051 core, 64 KB flash, and TQFP-100 package. It should be treated as a drop-in candidate only after checking the -098 versus -099 suffix meanings against the manufacturer ordering table. No verified cross-brand TQFP-100 replacement with matching memory, peripherals, programming, and electrical characteristics was established.
What is the best equivalent for the CY8C3446AXI-098?
No cross-brand equivalent can be recommended confidently because a true microcontroller replacement must match the 100-pin land pattern, 8051 execution model, 64 KB flash, PSoC peripheral resources, clock behavior, and programming workflow. The documented same-brand choice is the CY8C3446AXI-099, which retains the TQFP-100 package and core memory architecture. For another manufacturer's MCU, treat the device as a redesign candidate rather than a drop-in replacement.
What programming and tool compatibility should be checked for CY8C3446AXI-098?
Use a programmer and programming configuration that explicitly supports CY8C3446AXI-098 in its 100-pin TQFP package. The indexed device-programmer information identifies support for this exact family and package, but the installed adapter, socket, package orientation, and device algorithm should be confirmed before production use. Also validate the programming voltage, interface signals, erase or program time, and security configuration against the manufacturer programming documentation.

Dados de referência de engenharia para CY8C3446AXI-098 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the CY8C3446AXI-098 when the product design specifically calls for a 50 MHz 8051-based PSoC 3 controller with 64 KB embedded flash and a 100-pin TQFP package. Its configurable mixed-signal architecture is useful when combining digital control with programmable analog or digital resources, while the 100-pin package provides more I/O than compact low-pin-count MCUs. The CY8C3446AXI-099 is the closest documented same-family alternative because it retains the 8051 core, 64 KB flash, and TQFP-100 package, but the -098 and -099 suffixes must be resolved against the manufacturer ordering table before substitution. Do not select a different manufacturer's MCU solely to preserve the footprint: firmware, peripheral architecture, clocking, programming, and mixed-signal resource differences can require hardware and software redesign. For production use, verify temperature grade, electrical limits, package drawing, programming support, and lifecycle requirements.

Comparação com alternativas

Parâmetro Este produto CY8C3446AXI-099
Brand Infineon Infineon
Package TQFP-100, 14 mm × 14 mm TQFP-100
CPU Architecture 8051 8-bit core 8051 core
Maximum Clock Frequency 50 MHz 50 MHz
Flash Memory 64 KB (64K × 8 bits) 64 KB
Programmable Architecture PSoC 3 CY8C34xx PSoC 3 CY8C34xx
Ordering Suffix -098 -099; suffix-specific grade must be confirmed

Principais diferenciais

  • Same-family package and memory alignment (vs CY8C3446AXI-099)
  • Exact -098 ordering configuration (vs CY8C3446AXI-099)
  • High-rate 8-bit embedded processing (vs CY8C3446AXI-099)

Notas de projeto

Assign the TQFP-100 land pattern strictly from the manufacturer package drawing for the selected ordering code. Keep decoupling capacitors adjacent to the device supply pins, maintain the recommended trace geometry, and route sensitive analog signals away from fast digital and clock paths. Validate the footprint against the 14 mm by 14 mm package body before fabrication because pad length, span, and exposed thermal considerations depend on the exact package drawing.

Design the supply network around the manufacturer's permitted voltage range, current limits, and startup requirements. Place bulk and high-frequency decoupling at the power entry point, then connect local capacitors to the relevant supply pins with minimal loop area. Check brownout, reset release, and power-sequence behavior across all operating modes. Do not infer supply limits from related CY8C34xx members without checking the exact CY8C3446AXI-098 electrical table.

Do not treat CY8C3446AXI-098, CY8C3446AXA-098, and CY8C3446AXI-099 as interchangeable ordering strings. The related listings show similar package and memory descriptions, but the letters and digits can encode qualification, temperature, or ordering conditions. Use the manufacturer ordering table to resolve each suffix, then verify the programmed-device configuration and flash programming procedure. Also confirm programmer adapter and socket support for the TQFP-100 package before committing to production fixtures.

Treat clock, high-speed digital, and sensitive analog routes as separate PCB regions. Use a continuous ground reference where possible, avoid splitting return paths beneath active signals, and place external timing components close to their associated pins. If the design uses the PSoC clock or configurable digital blocks, verify maximum operating frequency and routing limitations in the device documentation rather than assuming that the 50 MHz core rating applies equally to every external interface.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declarations for the exact CY8C3446AXI-098 ordering code were identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the manufacturer product documentation before release.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

CY8C3446AXI-098 CY8C3446AXI-098 datasheet CY8C3446AXI-098 datasheet pdf CY8C3446AXI-098 pinout CY8C3446AXI-098 specifications CY8C3446AXI-098 TQFP-100 CY8C3446AXI-098 programmer CY8C3446AXI-098 price CY8C3446AXI-098 stock CY8C3446AXI-098 replacement CY8C3446AXI-098 equivalent CY8C3446AXI-098 vs CY8C3446AXI-099 Infineon CY8C3446AXI-098 CY8C3446 50MHz 64KB flash CY8C3446AXI-098 footprint

Componentes & termos relacionados

Infineon CY8C3446AXI-098 CY8C3446AXA-098 CY8C3446AXI-099 PSoC PSoC 3 CY8C34xx 8051 core 8-bit microcontroller mixed-signal microcontroller embedded processor semiconductor embedded flash 50 MHz 64 KB flash TQFP-100 14 mm × 14 mm package surface mount configurable analog blocks configurable digital blocks programmable system-on-chip industrial control sensor conditioning embedded flash programming
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ