CY8C3665LTI-002 67MHz 32KB Flash MCU | Infineon
N.º da peça: CY8C3665LTI-002 ✓ AtivoCY8C3665LTI-002 Visão geral
A programmable system-on-chip, or PSoC, combines a microcontroller core with programmable analog and digital resources on one integrated circuit. The CY8C36xx family belongs to the MCU -> embedded microcontroller -> programmable system-on-chip -> semiconductor hierarchy. Its combination of an 8051-compatible processing core, flash program memory, and mixed-signal peripherals makes it useful for compact control systems requiring more integration than a basic general-purpose microcontroller.
The key device characteristics are a 67 MHz maximum clock, 32 KB of flash organized as 32K by 8 bits, and an operating supply range from 0.5 V to 5.5 V. The 48-QFN package provides a compact surface-mount footprint for space-constrained industrial, consumer, communications, and embedded-control designs. Programmable peripheral resources can be placed into an application-specific configuration instead of relying on a fixed pin arrangement.
The CY8C3665LTI-002 is based on the 8051 architecture identified by the manufacturer and distributor product records. Its integrated design reduces the number of discrete components normally required for sensing, control, and communication functions. Exact ADC, timer, communications, GPIO, memory, and electrical-current limits must be confirmed against the device's pin description, peripheral configuration, and operating-condition tables in the manufacturer datasheet.
Typical application roles include industrial control panels, compact sensor nodes, building equipment, consumer appliances, communications modules, and embedded motor or process-control systems. In each case, the device can provide central control and programmable peripheral functions while its flash memory holds application firmware and configuration data.
PCB implementation requires careful attention to the 48-QFN footprint, exposed thermal pad, power-supply routing, decoupling, and the pin-specific programming and debug connections. Confirm the exact pin names and programmer requirements in the manufacturer datasheet and device programmer documentation before releasing a PCB or production fixture.
This product page consolidates the exact package, memory, frequency, core, and voltage information with practical design guidance, verified sourcing links, and a technical comparison framework. It also identifies which peripheral and package details require confirmation before hardware or firmware release.
Alternativas drop-in para CY8C3665LTI-002 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasCY8C3665LTI-002 Classificações máximas e características elétricas
| Product Type | 8-bit programmable system-on-chip microcontroller |
| Processor Core | 8051 core |
| Product Family | PSoC 3 CY8C36xx |
| Frequência máxima de clock | 67 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| Tensão de alimentação de operação | 0.5 V to 5.5 V |
| Encapsulamento | 48-QFN (7 mm x 7 mm) |
| Tipo de montagem | Surface mount |
| Device Type | Embedded microcontroller |
| Programming Interface | ISP and SWD |
| Program Memory Type | Flash |
Guia de Configuração de Pinos do CY8C3665LTI-002 48-qfn (7 mm x 7 mm)
Configuração de pinos para CY8C3665LTI-002 (pacote 48-qfn (7 mm x 7 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para CY8C3665LTI-002.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CY8C3665LTI-002 é adequado para 6 aplicaçãos: Industrial Control Panel, Compact Sensor Node, Building Equipment Controller, Consumer Appliance Control, Communications Module, Embedded Process Control.
Industrial Control Panel
The CY8C3665LTI-002 fits compact industrial control panels that need local logic, user-interface handling, and programmable peripheral functions in one package. Its 8051 core provides a familiar embedded-control platform, while 32 KB of flash supports application firmware and configuration parameters. The 67 MHz clock rating provides processing headroom for coordination tasks. A 48-QFN land pattern also helps reduce board area in space-constrained panels. Before layout release, assign sensing and control signals from the manufacturer pin table, confirm the required ADC characteristics, and provide separate filtering and grounding for analog nodes.
Recomendado
Compact Sensor Node
The CY8C3665LTI-002 can serve as the local controller in a compact sensor node that gathers measurements, applies filtering, evaluates thresholds, and communicates status. Its PSoC architecture is appropriate when configurable analog and digital functions can replace several discrete devices. The 32 KB flash area provides room for firmware, while the 67 MHz clock rating supports responsive control flow. The 0.5 V to 5.5 V operating range also permits integration with multiple low-voltage sensor architectures. Verify ADC resolution and input count, reference requirements, sensor interface timing, and low-power behavior in the manufacturer datasheet before finalizing the node.
Recomendado
Building Equipment Controller
The CY8C3665LTI-002 is suitable for building equipment controllers that monitor switches, coordinate actuators, and implement local control logic. Its embedded 8051 core and programmable system-on-chip resources support an integrated implementation without a separate host processor. The 48-QFN package keeps the controller compact, and the 32 KB flash capacity supports embedded application logic. For designs near motors, relays, or long wiring runs, isolate sensitive inputs and route return currents carefully. Confirm the GPIO drive limits, operating temperature range, watchdog behavior, and supply sequencing requirements in the device documentation before production release.
Recomendado
Consumer Appliance Control
The CY8C3665LTI-002 can act as the primary embedded controller in a compact consumer appliance that combines local user controls, sensors, and communication functions. Its 8051-compatible core and 32 KB of flash are appropriate for dedicated appliance firmware, while the 48-QFN footprint supports dense board layouts. The PSoC feature set can reduce the number of separate logic and interface components. Validate the 0.5 V to 5.5 V operating range against the appliance's internal rails, and review low-power requirements for standby operation. Programming access and production test points should be included without compromising the compact placement of the QFN package.
Recomendado
Communications Module
The CY8C3665LTI-002 is appropriate for a compact communications module that requires protocol handling, configuration storage, and peripheral coordination. The 8051 core and 67 MHz clock rating support embedded communications tasks, while 32 KB of flash stores firmware and operating parameters. The device's mixed-signal PSoC architecture can reduce component count around the communications processor. For implementation, confirm the availability and electrical characteristics of the required serial peripherals, external crystal requirements, and debug interface. Use controlled-impedance routing for high-speed signals and separate analog and digital return paths according to the reference design guidance.
Recomendado
Embedded Process Control
The CY8C3665LTI-002 can serve in a distributed process-control node where local loops must continue operating without a high-level host. Its programmable peripheral architecture supports configurable sensing, timing, and digital functions, while the 8051 core executes the control algorithm from 32 KB of flash. The 48-QFN package allows the controller to be placed close to sensors and actuators, helping reduce analog routing distances. Deployment near switching power stages requires careful grounding, filtering, and surge-control planning. Validate ADC performance, timer accuracy, input protection, and operating-temperature limits before using the device in safety-relevant or high-energy equipment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CY8C3665LTI-002 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Package | 48-QFN (7 mm x 7 mm) |
| Brand | Infineon Technologies |
| Processor Core | 8051 |
| Maximum Clock Frequency | 67 MHz |
| Flash Memory | 32 KB |
| Operating Supply Voltage | 0.5 V to 5.5 V |
| Programming Interfaces | ISP and SWD |
| Product Type | PSoC 3 CY8C36xx 8-bit MCU |
Principais diferenciais
- Compact 48-QFN integration (vs CY8C3665LTI-044)
- 65 MHz clock-rate advantage within the same CY8C3665 family (vs CY8C3665LTI-044)
- Shared 8051 core and flash organization (vs CY8C3665LTI-044)
Notas de projeto
Implement the 48-QFN footprint only after checking the manufacturer land-pattern dimensions, solder-mask clearance, paste geometry, and exposed-pad requirements. Route the supply and ground connections directly to their pins with short, low-impedance paths, and place the required bypass capacitors beside the associated power pins. Treat the exposed thermal pad as both a thermal and electrical connection according to the datasheet land pattern.
Separate analog, digital, and return-current paths on mixed-signal boards. Keep sensor inputs away from switching nodes and high-current actuator traces, use a continuous ground reference where appropriate, and terminate unused inputs according to the device pin guidance. Check the maximum transition and injection requirements for every externally connected signal so that ground bounce or supply disturbance does not compromise the 0.5 V to 5.5 V operating range.
Do not substitute the 44-pin CY8C3665LTI-044 directly for the 48-QFN CY8C3665LTI-002. Their shared family name does not make their packages pin compatible, and even firmware reuse requires a complete pin and peripheral remap. Also confirm the ISP and SWD connector assignment against the current device programmer documentation. A production fixture that assumes generic QFN numbering can program the wrong signals or damage the device.
Design the supply network for the device's 0.5 V to 5.5 V operating range while accounting for the actual core, analog, and I/O rail requirements shown in the manufacturer datasheet. Provide local high-frequency decoupling and a low-noise return path, especially when analog functions are used. Validate startup, brownout, and sequencing behavior in hardware rather than assuming that every rail can ramp or fall in any order.
Informações de conformidade
The device is an embedded microcontroller and is not inherently an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available product records and therefore remain unknown.