CY8C5566AXI-061 - 67MHz PSoC 5 MCU | Infineon
N.º da peça: CY8C5566AXI-061 ✓ AtivoCY8C5566AXI-061 Visão geral
A programmable system-on-chip, or PSoC, is a mixed-signal semiconductor category that integrates a processor, programmable analog blocks, programmable digital blocks, memory, and configurable peripherals into one device. PSoC 5 belongs to the ARM Cortex-M3 microcontroller hierarchy and reduces the number of separate components needed for sensing, control, and communication. Its 100-lead package exposes substantially more I/O than a small microcontroller package, supporting parallel external interfaces and mixed-signal signal routing.
The CY8C5566AXI-061 supports operation from DC through 67 MHz and includes 12-bit and 20-bit analog conversion capabilities. Its 2.7 V to 5.5 V operating-voltage range supports both 3.3 V and 5 V system architectures. The 64 KB flash configuration provides on-chip program storage, while 16 KB of RAM supports working memory, stack operations, buffers, and peripheral data handling. The industrial temperature range is -40 °C to +85 °C.
PSoC 5 devices combine configurable digital functionality with analog resources such as ADCs, comparators, amplifiers, and DACs. This architecture allows designers to adapt peripheral behavior and signal paths while reducing the number of discrete analog components. The Cortex-M3 core provides a familiar 32-bit instruction set, interrupt-driven control model, and deterministic peripheral integration for embedded applications.
Typical uses include industrial sensor controllers, data-acquisition modules, motor and power-system controllers, programmable analog front ends, and connected equipment. The 60 available I/O pins are particularly useful when a design requires multiple digital inputs, outputs, communication signals, or analog connections rather than a compact pin-limited control device.
The principal design consideration is board-level resource planning. Because the device supports configurable analog and digital blocks, firmware configuration, pin assignment, clock planning, and board-level decoupling must be evaluated together. Review the manufacturer datasheet pin table and configuration guidance before assigning package pins or routing sensitive analog signals.
This product page consolidates the core device specifications, verified package information, sourcing questions, and engineering guidance into a design-focused reference. It also distinguishes exact-order variants from genuine drop-in replacements, helping engineers avoid treating a different package suffix or a broadly similar microcontroller as an automatic substitute.
Alternativas drop-in para CY8C5566AXI-061 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com CY8C5566AXI-061 (mesmo formato e footprint) — diferindo em Package, Product Type, Program Memory, Processor Core, RoHS Status.
CY8C5566AXI-060
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
CY8C5566AXI-062
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
CY8C5567AXI-061
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
CY8C5567LXI-061
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
CY8C5568AXI-061
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
CY8C5566AXI-061 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M3 PSoC 5 CY8C55 microcontroller |
| Maximum CPU Frequency | 67 MHz |
| CPU Architecture | ARM Cortex-M3, 32-bit |
| Program Memory | 64 KB flash (64K x 8) |
| RAM Size | 16 KB (16K x 8) |
| Number of I/O Pins | 60 |
| Encapsulamento | 100-lead TQFP, 14 mm x 14 mm |
| Tipo de montagem | Surface mount |
| Operating Voltage | 2.7 V to 5.5 V |
| ADC Resolution | 12-bit and 20-bit |
| Operating Frequency | DC to 67 MHz |
| Faixa de temperatura de operação | -40 °C to +85 °C |
| Programmable System-on-Chip | PSoC 5 CY8C55 family |
| Status RoHS | Compliant |
| Flash Program Memory | 64 KB built-in flash |
| Device Type | Microcontroller IC / MCU |
| Manufacturer | Infineon Technologies |
Guia de Configuração de Pinos do CY8C5566AXI-061 100-lead tqfp, 14 mm x 14 mm
Configuração de pinos para CY8C5566AXI-061 (pacote 100-lead tqfp, 14 mm x 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para CY8C5566AXI-061.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CY8C5566AXI-061 é adequado para 6 aplicaçãos: Industrial Sensor and Condition Monitoring, Programmable Analog Front End, Data Acquisition and Instrumentation, Motor and Power-System Control, Communication and Networked Control, Consumer and Embedded Control Panel.
Industrial Sensor and Condition Monitoring
The CY8C5566AXI-061 fits sensor controllers that combine several analog channels with real-time control logic. Its Cortex-M3 core can operate up to 67 MHz, while the programmable analog resources support 12-bit and 20-bit conversion capabilities. The 2.7 V to 5.5 V range accommodates common industrial sensor interfaces, and the -40 °C to +85 °C specification suits controlled enclosure temperatures. Place the MCU close to the sensor circuitry, route analog inputs away from switching nodes, and validate the ADC configuration and calibration sequence in firmware.
Recomendado
Programmable Analog Front End
The CY8C5566AXI-061 is appropriate for a programmable analog front end because it combines configurable analog and digital blocks with a 67 MHz Cortex-M3 processor. This allows acquisition, filtering, thresholding, and control functions to share one MCU instead of requiring separate conversion and logic devices. The 100-lead package offers 60 I/O pins for sensor inputs, control outputs, and communications. Review the datasheet pin-description table before assigning special analog functions, and account for filtering, grounding, and reference-voltage accuracy during analog-layout design.
Recomendado
Data Acquisition and Instrumentation
For a compact data-acquisition module, the CY8C5566AXI-061 provides 12-bit and 20-bit conversion capabilities, 64 KB of flash, 16 KB of RAM, and 60 I/O pins. The 32-bit Cortex-M3 core can process acquisition sequences and communicate results through configured peripherals. Its 2.7 V to 5.5 V supply range supports mixed legacy and modern embedded rails. Design the analog front end for the required input bandwidth, use controlled grounding around conversion inputs, and validate timing margins for sampling, filtering, and data transfer.
Recomendado
Motor and Power-System Control
The CY8C5566AXI-061 can serve as the supervisory controller in motor or power-system equipment where real-time logic, analog monitoring, and multiple discrete signals are required. Operation up to 67 MHz supports deterministic control tasks, and the 60 I/O pins provide capacity for position inputs, fault signals, gate-command outputs, and communications. Keep high-current switching paths separate from sensitive analog routing, and use the manufacturer datasheet to confirm pin multiplexing, voltage limits, and startup behavior for the selected board configuration.
Recomendado
Communication and Networked Control
The CY8C5566AXI-061 is suitable for communication-centric embedded controllers that need a 32-bit processor, configurable peripherals, and numerous I/O resources in one package. The 64 KB flash and 16 KB RAM support networking stacks, protocol handling, and local control functions, while the PSoC architecture allows additional digital functions to be integrated. Confirm the selected communications peripherals and pin assignments against the datasheet. Apply short, controlled clock and signal routes, provide appropriate termination, and validate protocol timing under the highest expected bus loading.
Recomendado
Consumer and Embedded Control Panel
The CY8C5566AXI-061 can implement a configurable embedded control panel with tactile inputs, indicators, analog controls, and communications. Its 60 I/O pins accommodate multiple panel functions, while the Cortex-M3 core supports user-interface logic, debouncing, diagnostics, and protocol handling. The -40 °C to +85 °C range provides flexibility across industrial and commercial indoor products. Validate indicator current limits, connector protection, and analog-control settling time. Program the configuration through the PSoC design flow and verify every muxed peripheral signal against its final pin assignment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CY8C5566AXI-061 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | 100-lead TQFP, 14 mm x 14 mm |
| CPU Core | ARM Cortex-M3, 32-bit |
| Maximum Frequency | 67 MHz |
| Program Memory | 64 KB flash |
| RAM Size | 16 KB |
| I/O Pins | 60 |
| Operating Voltage | 2.7 V to 5.5 V |
| Conversion Resolution | 12-bit and 20-bit |
| Temperature Range | -40 °C to +85 °C |
Principais diferenciais
- Substantial mixed-signal integration in one MCU (vs Generic fixed-function Cortex-M3 microcontrollers)
- High I/O capacity for embedded control (vs Pin-limited compact Cortex-M3 microcontrollers)
- Integrated memory for standalone control (vs Cortex-M3 devices requiring external program or working memory)
- Broad supply and temperature coverage (vs Consumer-only microcontroller variants)
Notas de projeto
Assign the configurable analog and digital functions only after checking the datasheet pin-description table and the selected PSoC configuration. Route analog inputs away from switching nodes and high-current outputs, use a continuous ground reference where appropriate, and keep the MCU and sensitive components away from heat sources. The 100-lead package provides substantial routing flexibility, but pin multiplexing still imposes hard routing constraints.
Build the power tree around the documented 2.7 V to 5.5 V operating range and verify every attached peripheral for voltage compatibility. Place local bulk and bypass capacitance close to the device supply pins, provide a clean return path, and account for voltage tolerance at externally connected pins. Confirm power-up, brownout, clock, and peripheral behavior against the manufacturer datasheet before releasing the layout for production.
Do not assume that another PSoC 5 or Cortex-M3 device is a drop-in replacement. Firmware configuration, peripheral availability, muxing, clock requirements, interrupt behavior, and package details can differ even when CPU frequency and memory appear similar. For a replacement, require a complete footprint comparison, electrical review, peripheral mapping, firmware assessment, and validation on representative hardware.
Use the 67 MHz operating capability only after evaluating clock quality, trace length, load, and the selected PSoC configuration. Keep sensitive analog and communication signals away from noisy digital and switching paths, and use the package drawing and datasheet guidance for pin placement. Configuration changes can alter available clocks and peripherals, so validate timing and signal integrity after each firmware-board combination is finalized.
Informações de conformidade
RoHS compliance is identified for the CY8C5566AXI-061. The remaining compliance attributes require confirmation from the manufacturer or authoritative product documentation before qualification.