DSPIC33EP32MC502-E/SO - 60MHz 16-bit DSC, 32KB Flash | Microchip
N.º da peça: DSPIC33EP32MC502-E/SO ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.92 | $4,92 |
| 10 | $4.45 | $44,50 |
| 100 | $3.98 | $398,00 |
| 500 | $3.62 | $1.810,00 |
| 1.000 | $3.28 | $3.280,00 |
DSPIC33EP32MC502-E/SO Visão geral
A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP core. In the power-management hierarchy of embedded systems, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the standard choice for real-time closed-loop control where both fast math and rich analog integration are required.
Key features of the DSPIC33EP32MC502 include a dsPIC33E 16-bit core with integrated DSP engine (single-cycle MAC, 40-bit accumulators), high-speed PWM peripherals purpose-built for motor control, 4 DMA channels for offloading data movement from the CPU, and 5 timers. The -E temperature grade (-40C to +125C) and gull-wing SOIC package suit demanding industrial environments.
Per Microchip product documentation, the dsPIC33E family enables high-performance, precision motor-control systems that are more energy efficient, quieter in operation, and have extended service life. The device natively controls brushless DC (BLDC) and permanent-magnet synchronous motors (PMSM), with peripheral support for Field-Oriented Control (FOC) algorithms that demand deterministic PWM generation and fast ADC sampling.
Typical applications include BLDC and PMSM motor drives for industrial automation, digital power supplies and PFC stages, embedded control in appliances, and automotive-adjacent actuation systems where the extended temperature range is required.
When designing with this DSC, budget Flash carefully: 32 KB is sufficient for FOC firmware with Microchip's Motor Control library, but complex multi-axis or fieldbus-enabled designs may need the larger memory siblings in the same family and package footprint.
This page synthesizes distributor availability, drop-in same-footprint alternatives, and practical motor-control design guidance not consolidated in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-25.
Alternativas drop-in para DSPIC33EP32MC502-E/SO — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33EP32MC502-E/SO (mesmo formato e footprint) — diferindo em Package, SRAM, Operating Temperature, Core Architecture, Qualification.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33EP32MC202-I/SO
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.98 / unidade
Ver ficha técnica →DSPIC33EP32MC203T-I/TL
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.65 / unidade
Ver ficha técnica →DSPIC33EP32GP502T-E/MM
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.98 / unidade
Ver ficha técnica →DSPIC33EP32MC502-E/SO Classificações máximas e características elétricas
| Core | dsPIC33E 16-bit DSC |
| CPU Speed | 60 MIPS (60 MHz) |
| Program Memory (Flash) | 32 KB |
| SRAM | 4 KB |
| DMA Channels | 4 |
| Timers | 5 |
| Encapsulamento | 28-pin SOIC (SO), gull-wing |
| Temperatura de operação | -40C to +125C (Extended, E grade) |
| Tipo de montagem | Surface Mount |
| Terminal Form | Gull Wing |
| Number of Terminals | 28 |
| Technology | CMOS |
Guia de Configuração de Pinos do DSPIC33EP32MC502-E/SO 28-pin soic (so), gull-wing
Configuração de pinos para DSPIC33EP32MC502-E/SO (pacote 28-pin soic (so), gull-wing). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para DSPIC33EP32MC502-E/SO.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DSPIC33EP32MC502-E/SO é adequado para 6 aplicaçãos: BLDC Motor Control, PMSM Field-Oriented Control Drives, Digital Power Supplies and PFC, Industrial Automation and Robotics, Appliance Motor Drive Control, Automotive-Adjacent Actuation and Pumps.
BLDC Motor Control
The DSPIC33EP32MC502-E/SO is purpose-built for brushless DC motor control: its high-speed PWM peripherals generate complementary, dead-time-controlled outputs for three-phase inverters, while the 16-bit DSP core with single-cycle MAC executes commutation or Field-Oriented Control loops deterministically at up to 60 MIPS. With 32 KB Flash and 4 KB SRAM, a complete sensorless FOC stack plus protection logic fits within the memory budget. The 4 DMA channels offload ADC results and UART telemetry so the CPU stays dedicated to the control loop. In a typical design the DSC reads phase currents and the DC bus, computes the next PWM duty cycle each PWM period, and applies fault shutdown via hardware. The result, per Microchip, is a drive that is more energy efficient, quieter, and longer-lived than analogue or 8-bit alternatives.
Recomendado
PMSM Field-Oriented Control Drives
Permanent-magnet synchronous motors demand sinusoidal current shaping that only fast, deterministic control can deliver. The DSPIC33EP32MC502-E/SO meets this with its dsPIC33E DSP engine: Park/Clarke transforms and PI current loops run in microsecond order at the 60 MHz core clock, synchronized to the high-speed PWM period. The on-chip ADC, coordinated through DMA, samples phase currents at the PWM midpoint to avoid switching noise, a technique Microchip documents in its motor-control application notes. The extended -40C to +125C operating range of the -E grade suits drives mounted near heat-generating power stages, such as servo drives and traction auxiliaries. Because the 32 KB Flash holds the full FOC stack including startup and fault handling, no external memory is needed, and the 28-pin SOIC keeps controller footprint minimal on dense power boards.
Recomendado
Digital Power Supplies and PFC
Switching power supplies and power-factor-correction stages benefit from the DSPIC33EP32MC502-E/SO's combination of fast PWM, DMA-fed ADC sampling, and DSP-based compensator implementation. Voltage- and current-mode loops with 2-pole/2-zero compensators run inside the 32 KB Flash alongside soft-start, burst mode, and fault management. The 60 MIPS core closes current loops at switching frequencies of hundreds of kHz with margin, and the deterministic interrupt latency of the dsPIC33E core keeps control timing consistent, which directly translates to output ripple and transient performance. Digital implementation also enables adaptive features that analogue control cannot offer, such as efficiency-optimized mode switching across load ranges. The -E/SO's extended temperature rating supports power supplies in enclosed industrial equipment where ambient near the controller can exceed 85C.
Recomendado
Industrial Automation and Robotics
In factory automation nodes, the DSPIC33EP32MC502-E/SO serves as the real-time motion controller between a supervisory PLC or industrial Ethernet gateway and the power stage. Its 5 timers support quadrature encoder decoding for position feedback, while communication peripherals interface with higher-level controllers. The 4 DMA channels keep encoder counts and ADC samples moving without CPU intervention, preserving loop determinism. The DSP core handles feed-forward and vibration-damping computations that plain MCUs offload or omit. The 28-pin SOIC gull-wing package solders reliably with standard reflow processes and its -40C to +125C rating survives control-cabinet temperature excursions. Designers typically pair it with gate drivers and isolated current sensors to build compact servo axes, conveyors indexing, and robotic joint controllers where quiet, efficient, precise motion is a competitive requirement.
Recomendado
Appliance Motor Drive Control
Modern appliances - washing machines, refrigerators, dishwashers, and HVAC blowers - increasingly use variable-speed BLDC or PMSM motors to meet energy regulations and noise limits. The DSPIC33EP32MC502-E/SO provides the control backbone: high-speed PWM drives the inverter, the ADC plus DMA handles current and bus-voltage feedback, and the DSP core executes sensorless observers (BEMF or sliding-mode) within 32 KB Flash. Microchip notes that dsPIC33E-based designs produce quieter, more energy-efficient, longer-life appliances. The extended -40C to +125C grade tolerates the hot, humid environments near compressor and washer motor assemblies, and the low pin-count 28-pin SOIC keeps controller cost and board area low, which matters in high-volume consumer manufacturing where every cent of BOM is scrutinized.
Recomendado
Automotive-Adjacent Actuation and Pumps
Electric water pumps, fuel pumps, turbo actuators, and cooling-fan modules in vehicles need motor controllers that survive under-hood temperatures. The -E grade of the DSPIC33EP32MC502-E/SO is rated -40C to +125C, matching these environments, and the SOIC gull-wing package provides reliable solder joints under thermal cycling. The DSC's DSP core runs sensorless FOC or block-commutation with speed estimation, its PWM supports safety-relevant dead-time insertion, and hardware fault inputs allow immediate PWM tripping on overcurrent - a requirement for functional-safety-adjacent designs. With 32 KB Flash, diagnostic routines, limp-home modes, and basic CAN-based reporting via a companion CAN controller all coexist in memory. Lisleapex and Vyrian listings classify this MPN under automotive-grade applications, reflecting its extended-temperature positioning in vehicle subsystem designs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33EP32MC502-E/SO — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33EP32MC202-I/SO | DSPIC33EP32MC203 | DSPIC33EP32GP502 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SOIC (SO) | 28-pin SOIC (SO) - same | 28-pin SOIC (SO) - same | 28-pin SOIC (SO) - same |
| CPU Speed | 60 MIPS (60 MHz) | 60 MIPS (60 MHz) | 60 MIPS (60 MHz) | 60 MIPS (60 MHz) |
| Peripheral Family | Motor Control (MC) | Motor Control (MC) | Motor Control (MC) | General Purpose (GP) |
| DMA Channels | 4 | 4 | 4 | 4 |
| Footprint Compatible | Yes (28-pin SOIC) | Yes - drop-in | Yes - drop-in | Yes - drop-in |
Principais diferenciais
- Extended temperature range for hot environments (vs DSPIC33EP32MC202-I/SO)
- Full 32 KB Flash in the drop-in footprint (vs DSPIC33EP32MC203)
- Motor-control peripheral set, not general-purpose (vs DSPIC33EP32GP502)
Notas de projeto
The 28-pin SOIC wide-body requires a standard SOIC-28 land pattern; the gull-wing leads tolerate both wave and reflow soldering. Place 0.1 uF ceramic decoupling capacitors within 5 mm of each VDD/VSS pair, plus one 4.7-10 uF bulk capacitor near the supply entry. Keep the VDD/VSS loop area small and connect VSS to a solid ground plane. If your board may later switch to the -E/MM QFN variant, note that the QFN's exposed pad is NOT footprint-compatible with SOIC - plan package choice before layout.
Estimated: at 60 MHz the dsPIC33E core typically draws tens of mA, so junction dissipation is roughly 60-100 mW. With a theta-JA on the order of 70-100 C/W for SOIC-28, junction rise above ambient is only a few degrees C, so the -E grade's +125C limit is comfortably usable near its ceiling as long as self-heating from I/O currents driving gate drivers is accounted for. The binding constraint in motor drives is usually ambient temperature at the controller location, not silicon dissipation.
Do not confuse package suffixes: -E/SO (SOIC-28), -E/MM (QFN 6x6), -E/SS (SSOP-28), and -I/SP (SDIP) are electrically equivalent but physically incompatible - the SS and SP variants cannot replace the SO on the same land pattern. Also verify Flash headroom before committing: at 32 KB, a full FOC stack plus communication stacks (e.g., CAN reporting) can approach the limit; budget code size early or select a larger-memory family member. MCLR programming circuits must follow Microchip ICSP guidelines for in-system debug with ICD/PICkit tools.
Informações de conformidade
Compliance data not stated in the provided verified web data. Microchip standard products are generally RoHS-compliant, but this must be confirmed on the Microchip product page before design-in.
