DSPIC33EP512GM710T-I/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip
N.º da peça: DSPIC33EP512GM710T-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.35 | $18,35 |
| 10 | $16.65 | $166,50 |
| 25 | $15.95 | $398,75 |
| 100 | $15.29 | $1.529,00 |
| 1.000 | $13.85 | $13.850,00 |
DSPIC33EP512GM710T-I/PT Visão geral
A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). In the embedded systems hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, DSP instruction support, and deterministic interrupt handling for real-time closed-loop control applications.
Key features of the DSPIC33EP512GM710T-I/PT include the 70 MIPS dsPIC DSC core, 12 motor control PWM channels, 8 input capture and 8 output capture channels, two quadrature encoder interfaces (QEI), four integrated operational amplifiers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing. The device also integrates a CAN 2.0B controller and multiple serial ports for industrial connectivity.
Technically, the dsPIC33E core features a 16-bit modified Harvard architecture with a 24-bit instruction word, 13 timers, 4 DMA channels, and 4 serial I/O ports, enabling deterministic real-time behavior. The integrated op-amps can be internally connected to ADC inputs, reducing external component count in current-sense and signal-conditioning chains for motor drives.
Typical applications include precision brushless DC and PMSM motor control, industrial power supplies, digital lighting (HID/LED ballasts), and embedded control systems requiring CAN networking. The four op-amps and QEI interfaces make the GM710 variant particularly well suited to servo and encoder-based motion systems.
A key design consideration: the 100-pin TQFP has 0.40 mm lead pitch, requiring careful PCB land pattern design and reflow profiling; decouple all VDD/VSS pairs with 0.1 uF ceramics placed close to each supply pin.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimizing selection for engineers evaluating dsPIC33EP512GM710 options.
Alternativas drop-in para DSPIC33EP512GM710T-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33EP512GM710T-I/PT (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Supply Voltage, Core Architecture, Core Processor.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33EP512GM710T-E/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33EP512GM710-I/PT
✅ Drop-In✓ Em estoque
$8.95 / unidade
Ver ficha técnica →DSPIC33EP512GM610T-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33EP256GM710T-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.25 / unidade
Ver ficha técnica →DSPIC33EP256MU810T-E/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.62 / unidade
Ver ficha técnica →DSPIC33EP512MU810T-I/PF
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33EP512GM710T-I/PT Classificações máximas e características elétricas
| Core Architecture | 16-bit dsPIC33E DSC |
| Maximum CPU Speed | 70 MIPS |
| Program Memory Size | 512 KB (170K x 24) Flash |
| RAM Size | 48 KB |
| Tensão de alimentação | 3.3 V |
| Temperatura de operação | -40C to +85C |
| Encapsulamento | 100-TQFP (12 x 12 mm), 0.40 mm pitch |
| Motor Control PWM Channels | 12 MCPWM |
| Input Capture / Output Compare | 8 / 8 |
| Quadrature Encoder Interfaces | 2 QEI |
| Integrated Op-Amps | 4 |
| Timers | 13 |
| DMA Channels | 4 |
| Serial I/O Ports | 4 |
| Special Peripherals | CTMU, PTG, CAN 2.0B |
| Qualification | AEC-Q100 qualified |
| Packaging | Tape and Reel (T suffix) |
| Tipo de montagem | Surface Mount |
Guia de Configuração de Pinos do DSPIC33EP512GM710T-I/PT 100-tqfp (12 x 12 mm), 0.40 mm pitch
Configuração de pinos para DSPIC33EP512GM710T-I/PT (pacote 100-tqfp (12 x 12 mm), 0.40 mm pitch). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para DSPIC33EP512GM710T-I/PT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DSPIC33EP512GM710T-I/PT é adequado para 6 aplicaçãos: Precision BLDC/PMSM Motor Control, Industrial Power Conversion and Inverters, Digital Lighting and Ballasts, Automotive and Industrial Body Control, Embedded Sensing and Capacitive Touch Systems, Test, Measurement and Data Acquisition.
Precision BLDC/PMSM Motor Control
The DSPIC33EP512GM710T-I/PT was architected for precision motor control: its 12 motor-control PWM channels support complementary outputs with dead-time insertion for three-phase inverters, while 2 quadrature encoder interfaces resolve rotor position at high count rates. The 4 integrated op-amps condition shunt-resistor phase currents directly into the ADC for field-oriented control (FOC) loops running at 10-20 kHz on the 70 MIPS DSP core. Using the on-chip amplifiers removes external current-sense amplifiers, cutting BOM cost per axis. Designers should budget ADC sampling latency into the FOC loop and use the DMA channels to stream current samples without CPU overhead, achieving deterministic torque control in servo drives, robotics, and industrial automation.
Recomendado
Industrial Power Conversion and Inverters
In solar micro-inverters, UPS systems, and industrial power supplies, the DSPIC33EP512GM710T-I/PT provides the deterministic 70 MIPS core needed for multi-loop digital power control with 12 MCPWM channels driving full-bridge and LLC topologies. The CTMU supports precision timing measurements for power-factor and efficiency monitoring, and the CAN 2.0B controller links the converter into industrial control networks. The 512 KB Flash holds compensation tables, communication stacks, and firmware update code with headroom for feature growth. Because switching converters generate significant noise, designers should synchronize PWM and ADC sampling, keep analog grounds star-routed, and exploit the 4 DMA channels to keep the digital control loop timing jitter below the loop bandwidth requirement.
Recomendado
Digital Lighting and Ballasts
High-intensity discharge and LED ballast designs benefit from the DSPIC33EP512GM710T-I/PT's combination of high-resolution PWM outputs, CTMU-based sensing, and sufficient Flash for lighting communication protocols such as DALI or DMX512. The 70 MIPS core executes resonant-mode control algorithms for lamp driving at frequencies in the hundreds of kilohertz, while the 8 output-compare channels handle multi-channel dimming and sequencing. The 3.3 V operation simplifies interfacing with external drivers and communication PHYs. In lighting fixtures with tight thermal budgets, the 100-TQFP's exposed-lead thermal path allows operation without heatsinks at moderate clock utilization; designers should still verify junction temperature against worst-case ambient inside the luminaire enclosure.
Recomendado
Automotive and Industrial Body Control
With AEC-Q100 qualification per distributor data, the DSPIC33EP512GM710T-I/PT suits body-control, pump-control, and actuator modules that demand CAN networking and motor drive in one chip. The CAN 2.0B controller with hardware message buffers handles in-vehicle networking, while 12 MCPWM channels drive DC motors, flap actuators, and pumps with closed-loop feedback from the QEI or input-capture modules. The -40C to +85C industrial rating covers most under-dash and body zones; for engine-bay or external locations, the DSPIC33EP512GM710T-E/PT drop-in variant extends the rating to +125C. Designers must comply with load-dump transient requirements via proper TVS protection on the supply input and CAN lines.
Recomendado
Embedded Sensing and Capacitive Touch Systems
The Charge Time Measurement Unit (CTMU) on the DSPIC33EP512GM710T-I/PT enables capacitive touch sensing and precision time-of-flight or resistance measurement without a dedicated touch controller. Combined with the 4 on-chip op-amps and 48 KB of RAM for signal buffering, the device can implement touch UI panels alongside motor or actuator control in a single 100-TQFP. The 512 KB Flash accommodates touch-tuning libraries, graphical state machines, and communication stacks concurrently. For reliable touch performance, designers should follow Microchip's CTMU layout guidance: shield traces under sensor pads with ground hatching, keep sense traces short, and use the CTMU current-source calibration routine at production to compensate for PCB-to-PCB capacitance variation.
Recomendado
Test, Measurement and Data Acquisition
The DSPIC33EP512GM710T-I/PT serves as a measurement engine in portable instruments and DAQ nodes: 13 timers and 8 input-capture channels timestamp external events with high resolution, the PTG (Peripheral Trigger Generator) automates precisely sequenced ADC sweeps, and 4 DMA channels stream samples to 48 KB of RAM without CPU intervention. The 70 MIPS core applies DSP filtering (FIR/IIR) on the fly, and the 512 KB Flash stores calibration tables and logging firmware. Multiple serial ports (4 serial I/O ports) export data over UART/SPI/I2C to hosts or radios. In noise-sensitive analog front ends, use the integrated op-amps for first-stage gain and reserve external precision amplifiers for microvolt-level measurements.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33EP512GM710T-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33EP512GM710T-E/PT | DSPIC33EP512GM610T-I/PT | DSPIC33EP256GM710T-I/PT | DSPIC33EP512MU810T-I/PF |
|---|---|---|---|---|---|
| Package | 100-TQFP (12x12 mm), 0.40 mm pitch | 100-TQFP (12x12) - same | 100-TQFP (12x12) - same | 100-TQFP (12x12) - same | 100-TQFP - same footprint family |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 512 KB (170K x 24) | 512 KB | 256 KB | 256 KB | 512 KB |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C |
| USB Module | No | No | No | No | Yes (full-speed OTG) |
Principais diferenciais
- Maximum peripheral density in the GM710 family (vs DSPIC33EP256GM710T-I/PT)
- Extended-temperature pin-compatible sibling (vs DSPIC33EP512GM710T-E/PT)
- Dedicated motor-control peripherals vs USB-centric sibling (vs DSPIC33EP512MU810T-I/PF)
Notas de projeto
Decouple every VDD/VSS pair on the 100-TQFP with 100 nF ceramic capacitors placed within 2 mm of the pins, plus 4.7-10 uF bulk capacitance near the device. Follow the datasheet internal-regulator VCAP connection requirement exactly - an incorrectly sized or missing VCAP capacitor is the most common cause of unreliable startup on dsPIC33EP designs. Estimated: with 70 MIPS core current in the 60-80 mA range (per typical dsPIC33EP figures), supply rail drop should be kept under 50 mV at the pins during DMA-heavy operation.
The 100-TQFP has 0.40 mm lead pitch, so follow IPC-compliant land patterns for TQFP-100 and verify stencil aperture design to avoid bridging on the fine-pitch leads. Route the QEI and motor-current sense signals differentially and keep them away from PWM switch nodes. Place the crystal with short traces and local ground guard; the dsPIC33E PLL multiplies the primary oscillator to 70 MIPS, so oscillator layout quality directly limits achievable clock accuracy.
Two frequent mistakes: (1) assuming the T suffix is a different grade - it only indicates tape-and-reel packaging, electrically identical to the tray part; (2) mixing up the GM710 (100-pin) with the GM306/GM310 (smaller pin counts) during BOM substitution - these are NOT pin-compatible. Also confirm peripheral pin-select mapping in firmware when porting between GM710 and MU810, since USB takes over multiplexed pins on the MU variant.
Informações de conformidade
Halogen-free compliant and AEC-Q100 qualification per datasheets.com/globalspec cross-reference data; RoHS/lead-free per standard Microchip 100-TQFP offering. REACH and conflict minerals status not stated in provided data.
